RESUMO
Background: Parkinson's disease (PD) is the second most common age-related neurodegenerative disorder. Levodopa (L-DOPA) remains the gold-standard drug available for treating PD. Curcumin has many pharmacological activities, including antioxidant, anti-inflammatory, antimicrobial, anti-amyloid, and antitumor properties. Copolymers composed of Poly (ethylene oxide) (PEO) and biodegradable polyesters such as Poly (ε-caprolactone) (PCL) can self-assemble into nanoparticles (NPs). This study describes the development of NH2-PEO-PCL diblock copolymer positively charged and modified by adding glutathione (GSH) on the outer surface, resulting in a synergistic delivery of L-DOPA curcumin that would be able to pass the blood-brain barrier. Methods: The NH2-PEO-PCL NPs suspensions were prepared by using a nanoprecipitation and solvent displacement method and coated with GSH. NPs were submitted to characterization assays. In order to ensure the bioavailability, Vero and PC12 cells were treated with various concentrations of the loaded and unloaded NPs to observe cytotoxicity. Results: NPs have successfully loaded L-DOPA and curcumin and were stable after freeze-drying, indicating advancing into in vitro toxicity testing. Vero and PC12 cells that were treated up to 72 h with various concentrations of L-DOPA and curcumin-loaded NP maintained high viability percentage, indicating that the NPs are biocompatible. Conclusions: NPs consisting of NH2-PEO-PCL were characterized as potential formulations for brain delivery of L-DOPA and curcumin. The results also indicate that the developed biodegradable nanomicelles that were blood compatible presented low cytotoxicity.
Assuntos
Curcumina , Nanopartículas , Doença de Parkinson , Animais , Curcumina/farmacologia , Portadores de Fármacos , Levodopa , Doença de Parkinson/tratamento farmacológico , Poliésteres/farmacologia , Polietilenoglicóis , Polímeros , RatosRESUMO
We demonstrate self-assembly, characterization and bioelectrocatalysis of redox-active cyclodextrin-coated nanoparticles. The nanoparticles with host-guest functionality are easy to assemble and permit entrapment of hydrophobic redox molecules in aqueous solution. Bis-pyrene-ABTS encapsulated nanoparticles were investigated electrochemically and spectroscopically. Their use as electron shuttles is demonstrated via an intraelectron transfer chain between neighboring redox units of clustered particles (Dh,DLS = 195 nm) and the mono- and trinuclear Cu sites of bilirubin oxidases. Enhanced current densities for mediated O2 reduction are observed with the redox nanoparticle system compared to equivalent bioelectrode cells with dissolved mediator. Improved catalytic stability over 2 days was also observed with the redox nanoparticles, highlighting a stabilizing effect of the polymeric architecture. Bioinspired nanoparticles as mediators for bioelectrocatalysis promises to be valuable for future biofuel cells and biosensors.
Assuntos
Ciclodextrinas/química , Hypocreales/enzimologia , Nanopartículas/química , Oxirredutases atuantes sobre Doadores de Grupo CH-CH/química , Benzotiazóis/química , Técnicas Biossensoriais , Catálise , Técnicas Eletroquímicas , Eletrodos , Transporte de Elétrons , Elétrons , Modelos Moleculares , Oxirredução , Pirenos/química , Ácidos Sulfônicos/químicaRESUMO
We report in this contribution that while low molecular weight hemicellulosic building blocks are known not to interact with cellulosic materials, their multivalent presentation on a polymeric scaffold significantly enhanced the binding interactions that are remarkably in the same range as those usually observed for lectin-carbohydrate interactions. We developed a poly(propargyl methacrylate) scaffold on which we conjugated, by "post-click" reaction, a variety of azide reducing-end functionalized xyloglucan oligosaccharides with controlled enzymatic-mediated rate of degalactosylation. Bottlebrush-like xyloglucan oligosaccharide glycopolymers (poly(XGOn)) were obtained and their self-assemblies in aqueous solution were investigated using dynamic light scattering (DLS). We demonstrated that increasing the extent of degalactosylation promoted self-association of poly(XGOn), which we attribute to the appearance of hydrophobic domains. A sharp thermoresponsiveness, which corresponds to a decrease in aggregate size with increasing temperature, was observed when the extent of degalactosylation was 30% or greater. Importantly, isothermal titration calorimetry (ITC) and polarized/depolarized DLS revealed that poly(XGOn) exhibit a significant capacity to interact with nanocrystalline cellulose (NCC) surfaces particularly for the nondegalactosylated form, emphasizing the important role of galactosyl residues in the binding mechanism and in the 3-dimensional structures of glycopolymers.
Assuntos
Materiais Biomiméticos/síntese química , Celulose/análogos & derivados , Glucanos/química , Xilanos/química , Nanopartículas/químicaRESUMO
A series of amphiphilic photo-responsive heterografted copolymers have been successfully synthesized. The random copolymers were composed of a methacrylate backbone, with various compositions of hydrophilic oligomeric 2-methyl-2-oxazoline side chains (OMOx) and hydrophobic long alkyl chains terminated by a coumarin moiety (Cm). Using dynamic (DLS) and static light scattering (SLS), and transmission electron microscopy (TEM), their self-assembling behavior was studied in water using the nanoprecipitation method. Depending on the system, one, two or three particle size distributions co-exist in solution. However, DLS measurements showed that monomodal and slightly polydisperse self-assemblies were obtained with the more hydrophobic copolymers (i.e., 85% of hydrophobic monomers with a long alkyl chain terminated by a coumarin moiety (MCm) per molecule) with hydrodynamic diameters ranging from ca. 130 to 300 nm. Morphological information on these self-assembly structures was obtained using SLS: a Gaussian behavior has thus been evidenced. Finally, these heterografted copolymers were illuminated using UV light at λ = 350 nm inducing photo-crosslinking of the coumarin units. The influence of UV illumination on the thus-formed nanoparticles was investigated by carrying out complementarily DLS-measurements and UV spectroscopy.
RESUMO
The controlled self-assembly of precise and well-defined photochemically and electrochemically active carbohydrate-coated nanoparticles offers the exciting prospect of biocompatible catalysts for energy storage/conversion and biolabeling applications. Here an aqueous nanoparticle system has been developed with a versatile outer layer for host-guest molecule encapsulation via ß-cyclodextrin inclusion complexes. A ß-cyclodextrin-modified polystyrene polymer was first obtained by copper nanopowder click chemistry. The glycopolymer enables self-assembly and controlled encapsulation of tetrazine-naphthalimide, as a model redox-active agent, into nanoparticles via nanoprecipitation. Cyclodextrin host-guest interactions permit encapsulation and internanoparticle cross-linking for the formation of fluorescent compound and clustered self-assemblies with chemically reversible electroactivity in aqueous solution. Light scattering experiments revealed stable particles with hydrodynamic diameters of 138 and 654 nm for nanoparticles prepared with tetrazine, of which 95% of the nanoparticles represent the smaller objects by number. Dynamic light scattering revealed differences as a function of preparation method in terms of size, 3-month stability, polydispersity, radius of gyration, and shape factor. Individual self-assemblies were visualized by atomic force microscopy and fluorescence microscopy and monitored in real-time by nanoparticle tracking analysis. UV-vis and fluorescence spectra provided insight into the optical properties and critical evidence for host-guest encapsulation as evidenced by solvachromatism and enhanced tetrazine uptake. Cyclic voltammetry was used to investigate the electrochemical properties and provided further support for encapsulation and an estimate of the tetrazine loading capacity in tandem with light scattering data.
RESUMO
The colloidal stability together with the tunable aggregation and viscoelastic properties of thermoresponsive polymer-grafted cellulose nanocrystals (CNCs) were investigated. TEMPO oxidation of CNCs followed by peptidic coupling in water were used to covalently graft thermosensitive Jeffamine polyetheramine M2005 chains onto the surface of CNCs. The resulting polymer-decorated particles (M2005-g-CNCs) exhibited new colloidal properties, by their ability to perfectly redisperse in water and organic solvents such as toluene, dichloromethane or DMF after freeze-drying. In addition, they presented an enhanced thermal stability when compared to that of sulfated or TEMPO-oxidized CNCs. Dynamic light scattering experiments were used to demonstrate that the thermally induced aggregation of M2005-g-CNCs was fully reversible and reproducible over many temperature cycles and that, most interestingly, the aggregation number could be tuned by varying the ionic strength and/or the pH of the medium, making the suspension multiresponsive. This property arises from the variations of the sign (attractive or repulsive) and the range of the different types (entropic, electrostatic, hydrophobic) of interaction forces between the thermosensitive polymer-decorated nanoparticles. The variation of the viscoelastic properties of M2005-g-CNCs suspensions as a function of temperature, probed by oscillatory rheology measurements of more concentrated suspensions, revealed a reversible temperature-triggered liquid-to-gel transition. Such enhanced functionalities pave the way to the design of advanced CNC-based materials benefiting both from the intrinsic characteristics of these biosourced particles and the new properties imparted by the stimuli-sensitive grafted chains.
Assuntos
Celulose/química , Géis/química , Nanopartículas/química , Polímeros/química , Água/química , Interações Hidrofóbicas e Hidrofílicas , Concentração Osmolar , Suspensões , TemperaturaRESUMO
The conformational impact of environmental biopolymers on metal sorption was studied through Cu sorption on xanthan. The apparent Cu(2+) complexation constant (logK; Cu(2+) + L(-) â CuL(+)) decreased from 2.9 ± 0.1 at pH 3.5 to 2.5 ± 0.1 at pH 5.5 (ionic strength I = 0.1). This behavior is in apparent contradiction with basic thermodynamics, as usually the higher the pH the more cations bind. Our combined titration, circular dichroism and dynamic light scattering study indicated that the change observed in Cu bond strength relates to a conformational change of the structure of xanthan, which generates more chelating sites at pH 3.5 than at pH 5.5. This hypothesis was validated by the fact that the Cu sorption constants on xanthan were always higher than those measured on a mixture of pyruvic and glucuronic acids (logK = 2.2), which are the two constitutive ligands present in the xanthan monomer. This study shows the role of the structural conformation of natural biopolymers in metal bond strength. This finding may help to better predict the fate of Cu and other metals in acidic environmental settings such as aquatic media affected by acid mine drainage, as well as peats and acidic soils, and to better define optimal conditions for bioremediation processes.
Assuntos
Biopolímeros/química , Cobre/química , Meio Ambiente , Conformação Molecular , Polissacarídeos Bacterianos/química , Adsorção , Concentração de Íons de HidrogênioRESUMO
n-Heptyl α-d-mannose (HM) is a nanomolar antagonist of FimH, a virulence factor of E. coli. Herein we report on the construction of multivalent HM-based glycopolymers as potent antiadhesives of type 1 piliated E. coli. We investigate glycopolymer/FimH and glycopolymer/bacteria interactions and show that HM-based glycopolymers efficiently inhibit bacterial adhesion and disrupt established cell-bacteria interactions in vitro at very low concentration (0.1 µM on a mannose unit basis). On a valency-corrected basis, HM-based glycopolymers are, respectively, 10(2) and 10(6) times more potent than HM and d-mannose for their capacity to disrupt the binding of adherent-invasive E. coli to T84 intestinal epithelial cells. Finally, we demonstrate that the antiadhesive capacities of HM-based glycopolymers are preserved ex vivo in the colonic loop of a transgenic mouse model of Crohn's disease. All together, these results underline the promising scope of HM-based macromolecular ligands for the antiadhesive treatment of E. coli induced inflammatory bowel diseases.
Assuntos
Proteínas de Fímbrias/antagonistas & inibidores , Mucosa Intestinal/efeitos dos fármacos , Polissacarídeos Bacterianos/farmacologia , Adesinas de Escherichia coli , Animais , Adesão Celular/efeitos dos fármacos , Escherichia coli/patogenicidade , Células HeLa , Heptanol/química , Humanos , Doenças Inflamatórias Intestinais/microbiologia , Manose/química , Camundongos , Polissacarídeos Bacterianos/químicaRESUMO
Methacrylamide-based oligomers bearing phosphonate pending groups at the end of a long alkyl chain and originating from undecylenic acid synthons were subjected to direct oligomer dissolution. Size improvement towards much smaller objects was reached using the nanoprecipitation method: the oligomers were first dissolved in an organic solvent, and then precipitated in water using a syringe pump. Dynamic light scattering (DLS) showed phosphorous containing monomodal and quite narrow-sized self-assemblies in water with hydrodynamic diameters (DH) ranging from 80 to 280 nm (depending on the oligomer system). Direct visualization using transmission electron microscopy (TEM) and atomic force microscopy (AFM) showed filled and almost individual particles with spherical shape. They were considerably shrunk, suggesting the highly swollen character of the self-assemblies in suspension. Morphological information on the multi-scale self-assembled structures was complementarily obtained using static light scattering (SLS). Thus, at a low length-scale, highly segregated sub-units having sharp boundaries surrounded by water (Porod behaviour) were observed, whereas at a high length-scale random non-compact organization of these sub-units via weak interactions was found, forming a chaplet-like structure (Gaussian behaviour). Furthermore, the pH-sensitiveness of the suspensions obtained after the nanoprecipitation method was studied. Particularly, at pH = 12, the characteristic size drastically increased within few hours from typically â¼280 nm to 2 µm due to electrostatic repulsion between deprotonated hydroxyl groups. At longer times, the observed peculiar behaviour corresponded to the model of diffusion-limited cluster aggregation (DLCA) where the particles stuck easily together upon contact [continuation of the article by C. Bouilhac, C. Travelet, A. Graillot, S. Monge, R. Borsali and J.-J. Robin, Polym. Chem., 2014, 5, 2756-2767].
RESUMO
The present paper discusses the controlled self-assembly of sugar-containing block copolymer, maltoheptaose-block-polystyrene (MH(1.2k)-b-PS(4.5k)), into micellar nanoparticles of ca. 30 nm radius in aqueous media and their possibility of gold encapsulation. Micellar association of MH(1.2k)-b-PS(4.5k) into nanoparticles was demonstrated by mixing a large amount of water (MH-selective solvent) with a solution of MH(1.2k)-b-PS(4.5k) in a mixture of tetrahydrofuran (THF) (PS-selective solvent) and water with a certain weight fraction [4:1 (w/w) THF/water], where MH(1.2k)-b-PS(4.5k) exists as well-swollen single chains, followed by evaporation of THF. The mean hydrodynamic radii (Rh) of the nanoparticles were determined by dynamic light scattering (DLS) to be ca. 30 and 80 nm depending upon the method of preparation. The resulting nanoparticles were clearly visualized by transmission electron microscopy (TEM), atomic force microscopy (AFM), and field emission gun-scanning electron microscopy (FEG-SEM) imaging and complemented by nanoparticle tracking analysis (NTA) using a NanoSight instrument. The preliminary study of the self-assembly of MH(1.2k)-b-PS(4.5k) in the presence of gold nanoparticles functionalized with PS chains grafted on their surface indicated potential possibilities of encapsulation of gold nanoparticles into the block copolymer nanoparticles in aqueous media.
Assuntos
Ouro/química , Nanopartículas Metálicas/química , Poliestirenos/química , Glucanos/química , Nanopartículas Metálicas/ultraestrutura , Micelas , Microscopia de Força Atômica , Microscopia Eletrônica de Transmissão , Polímeros/químicaRESUMO
This work describes the synthesis and self-assembly of carbohydrate-clicked rod-coil amphiphilic systems. Copper-catalyzed Huisgen cycloaddition was efficiently employed to functionalize the hydrophilic extremity of PEG-b-tetra(p-phenylene) conjugates by lactose and N-acetyl-glucosamine ligands. The resulting amphiphilic systems spontaneously self-assembled into nanoparticles when dissolved in aqueous media, as evidenced by dynamic light scattering (DLS), transmission electron microscopy (TEM), and small-angle X-ray scattering (SAXS). The formation of highly monodisperse micelles having a mean diameter of 10 nm was observed for systems containing a PEG 900 core, and a decrease in the hydrophilic moiety (PEG 600) led to the formation of vesicles with a broader size distribution. The presence of carbohydrate residues on the surfaces of the micelles and their ability to establish specific interactions with wheat germ agglutinin (WGA) and peanut agglutinin (PNA) were further highlighted by light-scattering measurements, thus confirming the attractive applications of such sugar micelles in biosensor devices.
Assuntos
Adesivos , Glicoconjugados/química , Lectinas/química , Nanopartículas , Microscopia Eletrônica de Varredura , Microscopia Eletrônica de Transmissão , Espalhamento a Baixo Ângulo , Difração de Raios XRESUMO
This paper discusses the thermoresponsive nanoparticles obtained by self-assemblies of nonlinear oligosaccharide-based diblock copolymer systems. These diblock copolymers were synthesized by Cu(I)-catalyzed 1,3-dipolar azide/alkyne cycloaddition ("click" reaction) of propargyl-functionalized ß-cyclodextrin (ßCyD) and xyloglucooligosaccharide (XGO) with poly(N-isopropylacrylamide) (PNIPAM) having a terminal azido group prepared by atom transfer radical polymerization (ATRP). Elastic and quasi-elastic light scattering analysis of the dibock copolymers in H(2)O indicated that thermodynamic phase transitions of the PNIPAM blocks at their cloud points (T(cp)s ≈ 34 °C), around lower critical solution temperatures (LCSTs), triggered their self-assemblies into the nanoparticles. These nanoparticles had narrow size distributions and small interphases (i.e., sharp boundaries). The mean hydrodynamic radii (R(h)s) of the ßCyD and XGO-based nanoparticles were determined to be around 150 and 250 nm upon slow heating (i.e., step-by-step heating), and 364 and 91.5 nm upon fast heating, respectively, depending on a predominance of the interchain association or the intrachain contraction. Transmission electron microscope (TEM) and field emission gun-scanning electron microscopy (FEG-SEM) images of the nanoparticles clearly showed compact spherical nanoparticles whose cores are mainly made with the PNIPAM blocks, whereas the rough shells consist in the oligosaccharidic blocks.
Assuntos
Acrilamidas/química , Nanopartículas/química , Oligossacarídeos/síntese química , Polímeros/química , Temperatura , Acrilamidas/síntese química , Resinas Acrílicas , Catálise , Cobre/química , Ciclização , Estrutura Molecular , Oligossacarídeos/química , Polímeros/síntese químicaRESUMO
Fluorescent vesicles considered as a mimic of natural primitive cells are prepared from poly(3-hexylthiophene)-block-poly(3-O-methacryloyl-D-galactopyranose) P3HT-b-PMAGP copolymers. The unique characteristic of such vesicular nanostructures is their architecture, which comprises a hydrophobic π-conjugated P3HT wall stabilized by a hydrophilic PMAGP interface featuring glucose units. The results of this work offer a very efficient and straightforward method for engineering well-controlled fluorescent nanoparticles (without the addition of dyes), which provide an excellent support to the study of carbohydrate-protein interactions.
Assuntos
Galactose/química , Polímeros/química , Química Click , Fluorescência , Estrutura Molecular , Polimerização , Polímeros/síntese química , Tiofenos/químicaRESUMO
A series of new glyconanoparticles (GNPs) was obtained by self-assembly by direct nanoprecipitation of a mixture of two carbohydrate amphiphilic copolymers consisting of polystyrene-block-ß-cyclodextrin and polystyrene-block-maltoheptaose with different mass ratios, respectively 0-100, 10-90, 50-50 and 0-100%. Characterizations for all these GNPs were achieved using dynamic light scattering, scanning and transmission electron microscopy techniques, highlighting their spherical morphology and their nanometric size (diameter range 20-40 nm). In addition, by using the inclusion properties of cyclodextrin, these glyconanoparticles were successfully post-functionalized using a water-soluble redox compound, such as anthraquinone sulfonate (AQS) and characterized by cyclic voltammetry. The resulting glyconanoparticles exhibit the classical electroactivity of free AQS in solution. The amount of AQS immobilized by host-guest interactions is proportional to the percentage of polystyrene-block-ß-cyclodextrin entering into the composition of GNPs. The modulation of the surface density of the ß-cyclodextrin at the shell of the GNPs may constitute an attractive way for the elaboration of different electroactive GNPs and even GNPs modified by biotinylated proteins.
RESUMO
alpha-Cyclodextrins (alpha-CDs) have the ability to form inclusion complexes with poly(ethylene oxide) (PEO) polymer chains. These pseudo-polyrotaxanes (PPRs) can be obtained by quenching an alpha-CD/PEO mixture in water from 70 degrees C down to a lower temperature (typically in the range from 5 to 30 degrees C) thanks to favorable interactions between alpha-CD cavities and PEO chains. Moreover, starting from a liquid alpha-CD/PEO mixture at a total mass fraction of 15% w/w at 70 degrees C, the formation of PPRs with time at a lower temperature induces a white physical gel with time, and phase separation is observed. We established that PPR molecules are exclusively found in the precipitated phase although unthreaded alpha-CD molecules and unthreaded PEO chains are in the liquid phase. At 30 degrees C, the physical gel formation is much slower than at 5 degrees C. At 30 degrees C, we established that, in a first step, alpha-CDs thread onto PEO chains, forming PPR molecules which are not in good solvent conditions in water. At a higher length scale, rapid aggregation of the PPR molecules occurs, and threaded alpha-CD-based nanocylinders form (cylinder length L = 5.7 nm and cylinder radius R = 4.7 nm). At a higher length scale, alpha-CD-based nanocylinders associate in a Gaussian way, engendering the formation of precipitated domains which are responsible for the high turbidity of the studied system. At the end of this first step (i.e., after 20 min), the system still remains liquid and the PPRs are totally formed. Then, in a second step (i.e., after 150 min), the system undergoes its reorganization characterized by a compacity increase of the precipitated domains and forms a physical gel. We found that PPRs are totally formed after 20 min at 30 degrees C and that the system stays in a nongel state up to 150 min. This opens new perspectives regarding the PPR chemical modification: between these two characteristic times, we can easily envisage an efficient chemical modification of the PPR molecules in water, as for instance an end-capping reaction leading to the synthesis of polyrotaxanes.
Assuntos
Taxoides/química , Taxoides/síntese química , Água/química , alfa-Ciclodextrinas/química , Química/métodos , Desenho de Fármacos , Cinética , Espectroscopia de Ressonância Magnética , Modelos Químicos , Distribuição Normal , Polietilenoglicóis/química , Polímeros/química , Espalhamento de Radiação , Temperatura , Fatores de TempoRESUMO
Here we report the preparation and physico-chemical characterization of carbohydrate-decorated micelles and their interaction with lectins. A library of biosourced amphiphiles was prepared by copper-catalyzed azide-alkyne cycloaddition (CuAAC) between alkynyl sugars (lactose, N-acetyl-D-glucosamine) and azido-functionalized poly(ethylene glycol) esters (N3-PEG900-decanoate (C10) and -dodecanoate (C12)). In water, these glycoconjugates self-assemble into micelles of homogeneous nanometric size (11 nm) as evidenced by scattering techniques (DLS for light, and SAXS for X-ray). A comparative study with previously synthesized octadecanoate counterparts pointed out that that nature of the fatty acid has no significant influence on the particle size but only affects their compactness. These findings are in favor of a possible bulk preparation from lipid mixtures such as those encountered in renewable vegetable oils. The presence of the carbohydrate epitopes on the surface of the micelles and their bioavailability for lectin targeting were also evidenced by light scattering measurements using wheat germ agglutinin (WGA) and peanut (Arachis hypogaea) (PNA) lectins, supporting possible application as targeted drug nanocarriers.
Assuntos
Glicoconjugados/química , Glicoconjugados/metabolismo , Lectinas/metabolismo , Técnicas de Química Sintética , Epitopos , Ácidos Graxos/química , Glicoconjugados/síntese química , Glicoconjugados/imunologia , Lactose/química , Micelas , Nanopartículas , Polietilenoglicóis/química , Espalhamento a Baixo Ângulo , Termodinâmica , Aglutininas do Germe de Trigo/imunologiaRESUMO
In this work, polysaccharide nanoparticles based on tamarind seeds xyloglucan are prepared, analyzed in term of characteristic sizes and morphology, and degraded by the action of a glycoside-hydrolase. Obtained in an aqueous NaNO2 solution (0.1M), these unaggregated nanoparticles have a characteristic diameter of ca. 60 nm (DLS, AFM and TEM measures). They are not compact, but highly swollen and look like hyperbranched and dendrimer-like (soft sphere model) structures. This observation is coherent with the native structure of the xyloglucan macromolecules which are themselves branched. The enzymatic hydrolysis by cellulase of Trichoderma reesei of the xyloglucan nanoparticles is investigated. In particular, the apparent mass molecular weight drastically decreases meaning that the xyloglucan nanoparticles are effectively fully hydrolyzed by the endo-ß-(1,4)-glucanase. Furthermore, we observe that the enzyme has to uncoil the nanoparticles before cutting the ß-(1â4) bonds and digesting the xyloglucan.
Assuntos
Glucanos/metabolismo , Nanopartículas/química , Xilanos/metabolismo , Sequência de Carboidratos , Celulase/metabolismo , Glucanos/química , Hidrólise , Luz , Microscopia de Força Atômica , Dados de Sequência Molecular , Peso Molecular , Tamanho da Partícula , Espalhamento de Radiação , Nitrito de Sódio/química , Trichoderma/enzimologia , Xilanos/químicaRESUMO
Polycaprolactone (PCL) nanoparticles decorated with a mucoadhesive polysaccharide chitosan (CS) containing curcumin were developed aiming the buccal delivery of this drug. These nanoparticles were prepared by the nanoprecipitation method using different molar masses and concentrations of chitosan and concentrations of triblock surfactant poloxamer (PEO-PPO-PEO), in order to optimize the preparation conditions. Chitosan-coated nanoparticles showed positive surface charge and a mean particle radius ranging between 114 and 125 nm, confirming the decoration of the nanoparticles with the mucoadhesive polymer, through hydrogen bonds between ether and amino groups from PEO and CS, respectively. Dynamic Light Scattering (DLS) studies at different scattering angles and concentrations have shown that the nanoparticles are monodisperse (polydispersity indices were lower than 0.3). The nanoparticle systems were also examined with Nanoparticle Tracking Analysis (NTA), and the results were in good agreement with those obtained by DLS. Colloidal systems showed mean drug content about 460 µg/mL and encapsulation efficiency higher than 99%. Finally, when coated with chitosan, these nanoparticles show a great ability to interact with mucin indicating also their suitability for mucoadhesive applications.