Real-Time Quantifying Microdroplet Synthesis of Metal-Organic Framework Colloids Using Gas-Phase Electrophoresis.

A hyphenated electrospray-differential mobility analysis (ES-DMA) was developed for providing a high-resolution, real-time quantitative analysis on the metal-organic framework (MOF) colloids produced via the concept of microfluidic flow chemistry. Zeolitic imidazolate framework-8 was chosen as the representative MOF of the study. The results show that the physical size and number concentration of the MOF colloid were successfully characterized by the hyphenated ES-DMA during the microdroplet synthetic process, with 3 nm and 4% of measurement uncertainties, respectively. The effects of the synthetic temperature and the molar ratio of the organic linker to metal precursor were investigated, providing an opportunity for accurate control on the particle size (100-200 nm) of the microdroplet-synthesized MOF. The work demonstrates a powerful approach for the real-time quality assurance and material optimization in microdroplet synthesis of colloidal MOFs.

Exploring the Challenges of Calcium Looping Integrated with Methane Bireforming for Enhanced Carbon Capture and Utilization.

The urgent need to mitigate greenhouse gas emissions and combat climate change has driven research in carbon capture and utilization (CCU) technologies. Among these, calcium looping (CaL) has emerged as a prominent candidate for CO2 capture. This study aimed to explore the novel integration of CaL with methane bireforming (BRM) using CaO-Ni/CeO2 as dual-function material (DFM) and investigated the challenges and opportunities associated with the process. Implementing a calcium looping-bireforming (CaL-BRM) process revealed distinct differences compared to methane dry reforming (DRM). Notably, methane conversion occurred at higher temperatures, likely due to competition with the formation of Ca(OH)2. Meanwhile, the conversion of CO2 was delayed, possibly because hydroxide species on the CaO surfaces hindered the availability of CO2 for methane reforming. To address these challenges, Ni/CeO2 and CaO-Ni/CeO2 catalysts were employed in conventional catalytic gas-phase BRM and methane steam reforming (SRM) reactions. The results demonstrated that the presence of CaO significantly influenced BRM efficiency due to the Ca(OH)2 formation, as was evident by the results of the characterization on the postreaction catalysts and the parallel study of SRM. This study contributes valuable insights into the feasibility and potential of CaL-BRM, advancing the development of sustainable CCU technologies.

Design of Aerosol Nanoparticles for Interfacial Catalysis.

Interest in multifunctional nanoparticles is currently rising due to the increasing demand in green energy and environmental applications. The aerosol-based synthetic route emerges as a promising method for enabling the fabrication of multifunctional nanoparticles in a continuous and scalable manner. Meanwhile, interfacial catalysis is receiving great attention to enhance the performance of chemical reactions. In this regard, the utilization of aerosol nanoparticles is highly beneficial to the catalysis field by the creation of strong metal-support-promoter interactions for promoting interfacial catalysis. In this Perspective, aerosol-based synthesis of hybrid nanoparticles is briefly discussed. In addition, the interfacial catalysis of CO oxidation, methane combustion, CO2 hydrogenation, and dry reforming of methane are discussed to provide fundamental insights and concepts for the rational design of nanocatalysts with efficient interfaces.

Understanding Solvothermal Growth of Metal-Organic Framework Colloids for CO2 Capture Applications.

A quantitative study of the synthesis of metal-organic framework (MOF) colloids via a solvothermal growth process was demonstrated using electrospray-differential mobility analysis (ES-DMA), a gas-phase electrophoresis approach. HKUST-1, a copper-based MOF (Cu-MOF), was selected as the representative MOF of the study. The effects of the synthetic parameters, including ligand concentration (CBTC), synthetic temperature (Ts), and synthetic time (ts) versus material properties of the Cu-MOF, were successfully characterized based on the mobility size distributions measured by ES-DMA. The results show that the mobility size of Cu-MOF was proportional to Ts, ts, and CBTC during the solvothermal growth. X-ray diffraction and Brunauer-Emmett-Teller analyses were employed complementarily to the ES-DMA, confirming that the increase in mobility size of Cu-MOF was correlated to the increase in crystallinity (i.e., larger specific surface area and crystallite size). The results of CO2 pulse adsorption show that the synthesized Cu-MOF possessed a good CO2 adsorption ability under 1 atm, 35 °C, and the cumulative amount of CO2 uptake was proportional to the measured mobility size of Cu-MOF. The work provides a proof of concept for the controlled synthesis of MOF colloids with the support of gas-phase electrophoretic analysis, and the quantitative methodology is useful for the development of MOF-based applications in CO2 capture and utilization.

Assembly and Detachment of Hyaluronic Acid on a Protein-Conjugated Gold Nanoparticle.

The assembly-disassembly of hyaluronic acid (HA) with a bovine serum albumin-conjugated gold nanoparticle (BSA-AuNP) was demonstrated using a gas-phase electrophoresis approach, electrospray-differential mobility analysis (ES-DMA). Physical sizes, number and mass concentrations, and degrees of aggregation of HA, BSA, and AuNP were successfully quantified using ES-DMA hyphenated with inductively coupled plasma mass spectrometry. Attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy was employed complementarily for an orthogonal characterization of the assembly of HA with BSA-AuNP and the subsequent HA detachment. The results show that the surface packing density of HA on BSA-AuNP was proportional to the concentration of HA (CHA) when CHA ≤ 5 × 10-3 µmol/L, and the equilibrium binding constant of HA on BSA-AuNP was identified as ≈ 4 × 105 L/mol at pH 3. The pH-sensitive and enzyme-induced detachments of HA from BSA-AuNP were both successfully characterized using ES-DMA and ATR-FTIR. In the absence of enzymatic catalysis, the rate constant of HA detachment (k) was shown to increase by at least 3.7 times on adjusting the environmental acidity from pH 3 to pH 7. A significant enzyme-induced HA detachment was identified at pH 7, showing a remarkable increase of k by at least two times in the presence of an enzyme. This work provides a proof of concept for assembly of HA-based hybrid colloidal nanomaterials through the tuning of surface chemistry in the aqueous phase with the ability of in situ quantitative characterization, which has shown promise for the development of a variety of HA-derivative biomedical applications (e.g., drug delivery).

Silver Nanoparticles-Decorating Manganese Oxide Hybrid Nanostructures for Supercapacitor Applications.

A facile aerosol-based synthetic approach is demonstrated for the fabrication of silver-manganese oxide (Ag-MnOx) and cetyltrimethylammonium bromide (CTAB)-templated silver-manganese oxide (c-Ag-MnOx) hybrid nanostructures as the positive electrode materials of supercapacitors. Through gas-phase evaporation-induced self-assembly, silver nanoparticles are homogeneously decorated in the hybrid nanostructure to create a conductive path at the interface of the cluster of MnOx crystallites. The utilization of the capacitance of MnOx increases by the addition of Ag nanoparticles (>2 times for Ag-MnOx and ∼1.7 times for c-Ag-MnOx). An optimal specific capacitance is achieved when the concentration of the silver precursor (CAg) is 0.5 wt %, 118 F g-1 for Ag-MnOx, and 154 F g-1 for c-Ag-MnOx at a specific current of 1 A g-1. The enhanced supercapacitive performance by the addition of CTAB at low CAg is attributed to the increased surface area (>19.4%) for electrochemical reactions. The prototype method with mechanistic understanding demonstrated in this study shows promise for the fabrication of a variety of MnOx-based hybrid nanostructures for supercapacitor applications.

A facile quantification of hyaluronic acid and its crosslinking using gas-phase electrophoresis.

We report a facile, high-resolution approach to quantitatively characterize hyaluronic acid (HA) and study its crosslinking reaction using electrospray-differential mobility analysis (ES-DMA). Mobility size distributions, number concentrations, molecular mass distributions, and polydispersity index of HAs were obtained successfully via a rapid analysis by ES-DMA (< 30 min). The limit of detection, the limit of quantification, and the precision of the mobility size measurement achieve 2.5 nm, 4.0 nm, and 0.3 nm, respectively. Size exclusion chromatography (SEC) was employed as an orthogonal approach, showing that the averaged molecular mass and polydispersity index of HA measured by ES-DMA were close to the results of SEC on a semi-quantitative basis. The 1,4-butanediol diglycidyl ether (BDDE)-induced crosslinking of HA was also able to be successfully characterized through a time-dependent study using ES-DMA, which has shown the promise of direct analysis of solution-based reactions. Both the extent and the rate of HA crosslinking (induced by BDDE) were proportional to reaction temperature and concentration ratio of HA to BDDE. The activation energy of the reaction-limited BDDE-induced crosslinking of HA was found to be ≈ 21 kJ/mol. The prototype study demonstrates ES-DMA as a new method for a rapid quantitative characterization of HA and its derivative product and providing a capability of real-time monitoring of the HA crosslinking during formulation process. Graphical abstract.

Aerosol-Based Self-Assembly of a Ag-ZnO Hybrid Nanoparticle Cluster with Mechanistic Understanding for Enhanced Photocatalysis.

A gas-phase-controlled synthetic approach is demonstrated to fabricate Ag-ZnO hybrid nanostructure as a high-performance catalyst for photodegradation of water pollutants. The degradation of rhodamine B (RhB) was used as representative, which were tested and evaluated with respect to the environmental pH and the presence of dodecyl sulfate corona on the surface of the catalyst. The results show that a raspberry-structure Ag-ZnO hybrid nanoparticle cluster was successfully synthesized via gas-phase evaporation-induced self-assembly. The photodegradation activity increased significantly (20×) by using the Ag-ZnO hybrid nanoparticle cluster as a catalyst. A surge of catalytic turnover frequency of ZnO nanoparticle cluster (>20×) was observed through the hybridization with silver nanoparticles. The dodecyl sulfate corona increased the photocatalytic activity of the Ag-ZnO hybrid nanoparticle cluster, especially at the acidic and neutral pH environments (maximum 6×), and the enhancement in catalytic activity was attributed to the improved colloidal stability of ZnO-based nanoparticle cluster under the interaction with RhB. Our work provides a generic route of facile synthesis of the Ag-ZnO hybrid nanoparticle cluster with a mechanistic understanding of the interface reaction for enhancing photocatalysis toward the degradation of water pollutants.

Surface Modification of Cisplatin-Complexed Gold Nanoparticles and Its Influence on Colloidal Stability, Drug Loading, and Drug Release.

Cisplatin-complexed gold nanoparticles (PtII-AuNP) provide a promising strategy for chemo-radiation-based anticancer drugs. Effective design of such platforms necessitates reliable assessment of surface engineering on a quantitative basis and its influence on drug payload, stability, and release. In this paper, poly(ethylene glycol) (PEG)-stabilized PtII-AuNP was synthesized as a model antitumor drug platform, where PtII is attached via a carboxyl-terminated dendron ligand. Surface modification by PEG and its influence on drug loading, colloidal stability, and drug release were assessed. Complexation with PtII significantly degrades colloidal stability of the conjugate; however, PEGylation provides substantial improvement of stability in conjunction with an insignificant trade-off in drug loading capacity compared with the non-PEGylated control (<20% decrease in loading capacity). In this context, the effect of varying PEG concentration and molar mass was investigated. On a quantitative basis, the extent of PEGylation was characterized and its influence on dispersion stability and drug load was examined using electrospray differential mobility analysis (ES-DMA) hyphenated with inductively coupled plasma mass spectrometry (ICP-MS) and compared with attenuated total reflectance-FTIR. Using ES-DMA-ICP-MS, AuNP conjugates were size-classified based on their electrical mobility, while PtII loading was simultaneously quantified by determination of Pt mass. Colloidal stability was quantitatively evaluated in biologically relevant media. Finally, the pH-dependent PtII release performance was evaluated. We observed 9% and 16% PtII release at drug loadings of 0.5 and 1.9 PtII/nm2, respectively. The relative molar mass of PEG had no significant influence on PtII uptake or release performance, while PEGylation substantially improved the colloidal stability of the conjugate. Notably, the PtII release over 10 days (examined at 0.5 PtII/nm2 drug loading) remained constant for non-PEGylated, 1K-PEGylated, and 5K-PEGylated conjugates.

Quantifying Surface Area of Nanosheet Graphene Oxide Colloid Using a Gas-Phase Electrostatic Approach.

We demonstrate a new, facile gas-phase electrostatic approach to successfully quantify equivalent surface area of graphene oxide (GO) colloid on a number basis. Mobility diameter (dp,m)-based distribution and the corresponding equivalent surface area (SA) of GO colloids (i.e., with different lateral aspect ratios) were able to be identified by electrospray-differential mobility analysis (ES-DMA) coupled to a condensation particle counter (CPC) and an aerosol surface area analyzer (ASAA). A correlation of SA ∝ dp,m2.0 was established using the ES-DMA-CPC/ASAA, which is consistent with the observation by the 2-dimensional image analysis of size-selected GOs. An ultrafast surface area measurement of GO colloid was achieved via a direct coupling of ES with a combination of ASAA and CPC (i.e., measurement time was 2 min per sample; without size classification). The measured equivalent surface area of GO was ∼202 ± 7 m2 g-1, which is comparable to Brunauer-Emmett-Teller (BET) surface area, ∼240 ± 59 m2 g-1. The gas-phase electrostatic approach proposed in this study has the superior advantages of being fast, requiring no elaborate drying process, and requiring only a very small amount of sample (i.e., <0.01 mg). To the best of our knowledge, this is the first study of using an aerosol-based electrostatic coupling technique to obtain the equivalent surface area of graphene oxide on a number basis with a high precision of measurement.

Structure and Dynamics of Bimodal Colloidal Dispersions in a Low-Molecular-Weight Polymer Solution.

We present an experimental study of the structural and dynamical properties of bimodal, micrometer-sized colloidal dispersions (size ratio ≈ 2) in an aqueous solution of low-molecular-weight polymer (polyethylene glycol 2000) using synchrotron ultra-small angle X-ray scattering (USAXS) and USAXS-based X-ray photon correlation spectroscopy. We fixed the volume fraction of the large particles at 5% and systematically increased the volume fraction of the small particles from 0 to 5% to evaluate their effects on the structure and dynamics. The bimodal dispersions were homogenous through the investigated parameter space. We found that the partial structure factors can be satisfactorily retrieved for the bimodal colloidal dispersions using a Percus-Yevick hard-sphere potential when the size distributions of the particles were taken into account. We also found that the partial structure factor between the large particles did not exhibit a significant variation with increasing volume fraction of the small particles, whereas the isothermal compressibility of the binary mixture was found to decrease with increasing volume fraction of the small particles. The dynamics of single-component large-particle dispersion obey the principles of de Gennes narrowing, where the wave vector dependence of the interparticle diffusion coefficient is inversely proportional to the interparticle structure factor. The dynamics of the bimodal dispersions demonstrate a strong dependence on the fraction of small particles. We also made a comparison between the experimental effective dynamic viscosity of the bimodal dispersion with the theoretical predictions, which suggest that the complex mutual interactions between the large and small particles have a strong effect on the dynamic behaviors of bimodal dispersions.

Gas-phase self-assembly of uniform silica nanostructures decorated and doped with silver nanoparticles.

We report a systematic study of the controlled gas-phase synthesis of silver-silica hybrid nanostructures (Ag-SiO2 NP) using the concept of evaporation-induced self-assembly. The approach includes the use of a direct gas-phase electrophoresis for size classification and in situ characterization of mobility size. Transmission electron microscopy and ultraviolet-visible light spectroscopy were employed complementarily to determine the morphology and surface plasmon resonance of Ag-SiO2 NP. Results show that two types of Ag-SiO2 NPs were successfully synthesized: (1) AgNPs decorated on a SiO2-NP (Ag-T-SiO2 NP), and (2) AgNPs doped in a cluster of SiO2-NPs (Ag-C-SiO2 NP). The physical size, morphology, and compositions of Ag-SiO2 NPs were tunable through the adjustments of precursor concentrations and the selected mobility sizes. The results also show that SPR performance, colloidal stability, and dispersibility of AgNPs enhanced significantly in an aqueous environment after the hybridization with SiO2-NP (especially for Ag-C-SiO2 NP). The results and corresponding methodology summarized here provide the proof of concept to fabricate high-purity AgNP-based hybrid nanostructures through gas-phase evaporation-induced self-assembly for future biomedical applications (e.g., hyperthermal therapy, targeted drug delivery, and antibacterial applications).

Quantitative characterization of colloidal assembly of graphene oxide-silver nanoparticle hybrids using aerosol differential mobility-coupled mass analyses.

In this work, we develop an aerosol-based, time-resolved ion mobility-coupled mass characterization method to investigate colloidal assembly of graphene oxide (GO)-silver nanoparticle (AgNP) hybrid nanostructure on a quantitative basis. Transmission electron microscopy (TEM) and zeta potential (ZP) analysis were used to provide visual information and elemental-based particle size distributions, respectively. Results clearly show a successful controlled assembly of GO-AgNP by electrostatic-directed heterogeneous aggregation between GO and bovine serum albumin (BSA)-functionalized AgNP under an acidic environment. Additionally, physical size, mass, and conformation (i.e., number of AgNP per nanohybrid) of GO-AgNP were shown to be proportional to the number concentration ratio of AgNP to GO (R) and the selected electrical mobility diameter. An analysis of colloidal stability of GO-AgNP indicates that the stability increased with its absolute ZP, which was dependent on R and environmental pH. The work presented here provides a proof of concept for systematically synthesizing hybrid colloidal nanomaterials through the tuning of surface chemistry in aqueous phase with the ability in quantitative characterization. Graphical Abstract Colloidal assembly of graphene oxide-silver nanoparticle hybrids characterized by aerosol differential mobility-coupled mass analyses.

Metal-Organic Framework Colloids: Disassembly and Deaggregation.

We demonstrate a high-resolution method as an efficient tool to in situ characterize partially reversible assembly and aggregation of metal-organic framework (MOF) colloids. Based on the gas-phase electrophoresis, the primary size and the degree of aggregation of the MOF-525 crystals are tunable by pH adjustment and mobility selection. These findings allow for the further size control of MOF colloids and prove the capability of semiquantitative analysis for the MOF-based platforms in a variety of aqueous formulations (e.g., biomedical applications).

Surface PEGylation of Silver Nanoparticles: Kinetics of Simultaneous Surface Dissolution and Molecular Desorption.

A quantitative study of the stability of silver nanoparticles (AgNPs) conjugated with thiolated polyethylene glycol (SH-PEG) was conducted using gas-phase ion-mobility and mass analyses. The extents of aggregation and surface dissolution of AgNPs, as well as the amount of SH-PEG adsorption and desorption, were able to be characterized simultaneously for the kinetic study. The results show that the SH-PEG with a molecular mass of 6 kg/mol (SH-PEG6K) was able to adsorb to the surface of AgNP to form PEG6K-HS-AgNP conjugates, with the maximum surface adsorbate density of ∼0.10 nm(-2). The equilibrium binding constant for SH-PEG6K on AgNPs was calculated as ∼(4.4 ± 0.9) × 10(5) L/mol, suggesting a strong affinity due to thiol bonding to the AgNP surface. The formation of SH-PEG6K corona prevented PEG6K-HS-AgNP conjugates from aggregation under the acidic environment (pH 1.5), but dissolution of core AgNPs occurred following a first-order reaction. The rate constant of Ag dissolution from PEG6K-HS-AgNP was independent of the starting surface packing density of SH-PEG6K on AgNP (σ0), indicating that the interactions of H(+) with core AgNP were not interfered by the presence of SH-PEG6K corona. The surface packing density of SH-PEG6K decreased simultaneously following a first-order reaction, and the desorption rate constant of SH-PEG6K from the conjugates was proportional to σ0. Our work presents the first quantitative study to illustrate the complex mechanism that involves simultaneous aggregation and dissolution of core AgNPs in combination with adsorption and desorption of SH-PEG. This work also provides a prototype method of coupled experimental scheme to quantify the change of particle mass versus the corresponding surface density of functional molecular species on nanoparticles.

Quantifying nanosheet graphene oxide using electrospray-differential mobility analysis.

We report a high-resolution, traceable method to quantify number concentrations and dimensional properties of nanosheet graphene oxide (N-GO) colloids using electrospray-differential mobility analysis (ES-DMA). Transmission electron microscopy (TEM) was employed orthogonally to provide complementary data and imagery of N-GOs. Results show that the equivalent mobility sizes, size distributions, and number concentrations of N-GOs were able to be successfully measured by ES-DMA. Colloidal stability and filtration efficiency of N-GOs were shown to be effectively characterized based on the change of size distributions and number concentrations. Through the use of an analytical model, the DMA data were able to be converted into lateral size distributions, showing the average lateral size of N-GOs was ∼32 nm with an estimated thickness ∼0.8 nm. This prototype study demonstrates the proof of concept of using ES-DMA to quantitatively characterize N-GOs and provides traceability for applications involving the formulation of N-GOs.

Orthogonal analysis of functional gold nanoparticles for biomedical applications.

We report a comprehensive strategy based on implementation of orthogonal measurement techniques to provide critical and verifiable material characteristics for functionalized gold nanoparticles (AuNPs) used in biomedical applications. Samples were analyzed before and after ≈50 months of cold storage (≈4 °C). Biomedical applications require long-term storage at cold temperatures, which could have an impact on AuNP therapeutics. Thiolated polyethylene glycol (SH-PEG)-conjugated AuNPs with different terminal groups (methyl-, carboxylic-, and amine-) were chosen as a model system due to their high relevancy in biomedical applications. Electrospray-differential mobility analysis, asymmetric-flow field flow fractionation, transmission electron microscopy, scanning electron microscopy, atomic force microscopy, inductively coupled plasma mass spectrometry, and small-angle X-ray scattering were employed to provide both complementary and orthogonal information on (1) particle size and size distribution, (2) particle concentrations, (3) molecular conjugation properties (i.e., conformation and surface packing density), and (4) colloidal stability. Results show that SH-PEGs were conjugated on the surface of AuNPs to form a brush-like polymer corona. The surface packing density of SH-PEG was ≈0.42 nm(-2) for the methyl-PEG-SH AuNPs, ≈0.26 nm(-2) for the amine-SH-PEG AuNPs, and ≈0.18 nm(-2) for the carboxylic-PEG-SH AuNPs before cold storage, approximately 10 % of its theoretical maximum value. The conformation of surface-bound SH-PEGs was then estimated to be in an intermediate state between brush-like and random-coiled, based on the measured thicknesses in liquid and in dry states. By analyzing the change in particle size distribution and number concentration in suspension following cold storage, the long term colloidal stability of AuNPs was shown to be significantly improved via functionalization with SH-PEG, especially in the case of methyl-PEG-SH and carboxylic-PEG-SH (i.e., we estimate that >80 % of SH-PEG5K remained on the surface of AuNPs during storage). The work described here provides a generic strategy to track and analyze the material properties of functional AuNPs intended for biomedical applications, and highlights the importance of a multi-technique analysis. The effects of long term storage on the physical state of the particles, and on the stability of the ligand-AuNP conjugates, are employed to demonstrate the capacity of this approach to address critical issues relevant to clinical applications.

Protein-silver nanoparticle interactions to colloidal stability in acidic environments.

We report a kinetic study of Ag nanoparticles (AgNPs) under acidic environments (i.e., pH 2.3 to pH ≈7) and systematically investigate the impact of protein interactions [i.e., bovine serum albumin (BSA) as representative] to the colloidal stability of AgNPs. Electrospray-differential mobility analysis (ES-DMA) was used to characterize the particle size distributions and the number concentrations of AgNPs. Transmission electron microscopy was employed orthogonally to provide visualization of AgNPs. For unconjugated AgNPs, the extent of aggregation, or the average particle size, was shown to be increased significantly with an increase of acidity, where a partial coalescence was found between the primary particles of unconjugated AgNP clusters. Aggregation rate constant, kD, was also shown to be proportional to acidity, following a correlation of log(kD) = -1.627(pH)-9.3715. Using ES-DMA, we observe BSA had a strong binding affinity (equilibrium binding constant, ≈ 1.1 × 10(6) L/mol) to the surface of AgNPs, with an estimated maximum molecular surface density of ≈0.012 nm(-2). BSA-functionalized AgNPs exhibited highly-improved colloidal stability compared to the unconjugated AgNPs under acidic environments, where both the acid-induced interfacial dissolution and the particle aggregation became negligible. Results confirm a complex mechanism of colloidal stability of AgNPs: the aggregation process was shown to be dominant, and the formation of BSA corona on AgNPs suppressed both particle aggregation and interfacial dissolution of AgNP samples under acidic environments.

Controlled formation and characterization of dithiothreitol-conjugated gold nanoparticle clusters.

We report a systematic study of the controlled formation of discrete-sized gold nanoparticle clusters (GNCs) by interaction with the reducing agent dithiothreitol (DTT). Asymmetric-flow field flow fractionation and electrospray differential mobility analysis were employed complementarily to determine the particle size distributions of DTT-conjugated GNCs (DTT-GNCs). Transmission electron microscopy was used to provide visualization of DTT-GNCs at different states of aggregation. Surface packing density of DTT and the corresponding molecular conformation on the Au surface were characterized by inductively coupled plasma mass spectrometry and X-ray photoelectron spectroscopy. Results show that DTT increases the aggregation rate of gold nanoparticles (AuNPs) up to ≈100 times. A mixed conformation (i.e., combining vertically aligned, horizontally aligned, and cross-linking modes) exists for DTT on the Au surface for all conditions examined. The primary size of AuNPs, concentration of DTT, and the starting concentration of AuNPs influence the degree of aggregation for DTT-GNCs, indicating that the collision frequency, energy barrier, and surface density of DTT are the key factors that control the aggregation rate. DTT-GNCs exhibit improved structural stability compared to the citrate-stabilized GNCs (i.e., unconjugated) following reaction with thiolated polyethylene glycol (SH-PEG), indicating that cross-linking and surface protection by DTT suppresses disaggregation normally induced by the steric repulsion of SH-PEG. This work describes a prototype methodology to form ligand-conjugated GNCs with high-quality and well-controlled material properties.

Recent advances in continuous flow synthesis of metal-organic frameworks and their composites.

Metal-organic frameworks (MOFs) and their composites have garnered significant attention in recent years due to their exceptional properties and diverse applications across various fields. The conventional batch synthesis methods for MOFs and their composites often suffer from challenges such as long reaction times, poor reproducibility, and limited scalability. Continuous flow synthesis has emerged as a promising alternative for overcoming these limitations. In this short review, we discuss the recent advancements, challenges, and future perspectives of continuous flow synthesis in the context of MOFs and their composites. The review delves into a brief overview of the fundamental principles of flow synthesis, highlighting its advantages over batch methods. Key benefits, including precise control over reaction parameters, improved scalability and efficiency, rapid optimization capabilities, enhanced reaction kinetics and mass transfer, and increased safety and environmental sustainability, are addressed. Additionally, the versatility and flexibility of flow synthesis techniques are discussed. The article then explores various flow synthesis methods applicable to MOF and MOF composite production. The techniques covered include continuous flow solvothermal synthesis, mechanochemical synthesis, microwave and ultrasound-assisted flow synthesis, microfluidic droplet synthesis, and aerosol synthesis. Notably, the combination of flow chemistry and aerosol synthesis with real-time characterization is also addressed. Furthermore, the impact of flow synthesis on the properties and performance of MOFs is explored. Finally, the review discusses current challenges and future perspectives in the field of continuous flow MOF synthesis, paving the way for further development and broader application of this promising technique.