RESUMO
Imbalanced joint load distribution across the tibiofemoral surface is a risk factor for osteoarthritic changes to this joint. Lateral wedge insoles, with and without arch support, are a form of biomechanical intervention that can redistribute tibiofemoral joint load, as estimated by external measures of knee load. The objective of this study was to examine the effect of these insoles on the internal joint contact characteristics of osteoarthritic knees during weightbearing. Fifteen adults with tibiofemoral osteoarthritis underwent magnetic resonance imaging of the affected knee, while standing under 3 insole conditions: flat control, lateral wedge alone, and lateral wedge with arch support. Images were processed, and the surface area and centroid location of joint contact were quantified separately for the medial and lateral tibiofemoral compartments. Medial contact surface area was increased with the 2 lateral wedge conditions compared with the control (P ≤ .012). A more anterior contact centroid was observed in the medial compartment in the lateral wedge with arch support compared with the lateral wedge alone (P = .009). Significant changes in lateral compartment joint contact outcomes were not observed. These findings represent early insights into how loading at the tibiofemoral interface may be altered by lateral wedge insoles as a potential intervention for knee osteoarthritis.
Assuntos
Órtoses do Pé , Osteoartrite do Joelho , Suporte de Carga , Humanos , Osteoartrite do Joelho/fisiopatologia , Osteoartrite do Joelho/diagnóstico por imagem , Feminino , Masculino , Pessoa de Meia-Idade , Articulação do Joelho/fisiopatologia , Articulação do Joelho/diagnóstico por imagem , Idoso , Imageamento por Ressonância Magnética , Fenômenos Biomecânicos , Articulação TibiofemoralRESUMO
BACKGROUND: Inertial measurement units (IMUs) offer the ability to measure walking gait through a variety of biomechanical outcomes (e.g., spatiotemporal, kinematics, other). Although many studies have assessed their validity and reliability, there remains no quantitive summary of this vast body of literature. Therefore, we aimed to conduct a systematic review and meta-analysis to determine the i) concurrent validity and ii) test-retest reliability of IMUs for measuring biomechanical gait outcomes during level walking in healthy adults. METHODS: Five electronic databases were searched for journal articles assessing the validity or reliability of IMUs during healthy adult walking. Two reviewers screened titles, abstracts, and full texts for studies to be included, before two reviewers examined the methodological quality of all included studies. When sufficient data were present for a given biomechanical outcome, data were meta-analyzed on Pearson correlation coefficients (r) or intraclass correlation coefficients (ICC) for validity and reliability, respectively. Alternatively, qualitative summaries of outcomes were conducted on those that could not be meta-analyzed. RESULTS: A total of 82 articles, assessing the validity or reliability of over 100 outcomes, were included in this review. Seventeen biomechanical outcomes, primarily spatiotemporal parameters, were meta-analyzed. The validity and reliability of step and stride times were found to be excellent. Similarly, the validity and reliability of step and stride length, as well as swing and stance time, were found to be good to excellent. Alternatively, spatiotemporal parameter variability and symmetry displayed poor to moderate validity and reliability. IMUs were also found to display moderate reliability for the assessment of local dynamic stability during walking. The remaining biomechanical outcomes were qualitatively summarized to provide a variety of recommendations for future IMU research. CONCLUSIONS: The findings of this review demonstrate the excellent validity and reliability of IMUs for mean spatiotemporal parameters during walking, but caution the use of spatiotemporal variability and symmetry metrics without strict protocol. Further, this work tentatively supports the use of IMUs for joint angle measurement and other biomechanical outcomes such as stability, regularity, and segmental accelerations. Unfortunately, the strength of these recommendations are limited based on the lack of high-quality studies for each outcome, with underpowered and/or unjustified sample sizes (sample size median 12; range: 2-95) being the primary limitation.
Assuntos
Caminhada/fisiologia , Dispositivos Eletrônicos Vestíveis , Adulto , Fenômenos Biomecânicos , Feminino , Humanos , Masculino , Reprodutibilidade dos TestesRESUMO
Complex repetitive tasks are common in the workplace and have been associated with upper extremity disorders. The purpose of this study was to examine the progressive effects of highly repetitive work on joint kinematics and muscle activity of the trunk and upper extremity. Fifteen healthy men performed 60 one-minute cycles of 4 simulated automotive-related tasks. Electromyography of eight muscles and kinematics of the trunk and right upper extremity were collected. Data were analysed at 12-min intervals and divided into a complete work cycle. The time to complete the work cycle decreased by 6.3 s over the trials. Peak shoulder flexion decreased and peak elbow flexion increased during the work cycle. Muscle activity magnitude and variability was influenced by time during the repetitive tasks. This study found adaptations to highly repetitive but light work in only 1 h; redistributing muscle demands within the shoulder over time may reduce muscle fatigue development. Practitioner Summary: While the work was not strenuous, we were able to demonstrate muscular and postural adaptations in a single hour of simulated work. By evaluating both the whole work cycle and the sub-tasks, we aim to develop new methods for evaluating the risk of complex tasks in prolonged repetitive work.
Assuntos
Adaptação Fisiológica/fisiologia , Músculo Esquelético/fisiologia , Postura/fisiologia , Fatores de Tempo , Trabalho/fisiologia , Adulto , Braço/fisiologia , Fenômenos Biomecânicos , Cotovelo/fisiologia , Eletromiografia , Voluntários Saudáveis , Humanos , Masculino , Fadiga Muscular/fisiologia , Amplitude de Movimento Articular/fisiologia , Ombro/fisiologia , Tronco/fisiologiaRESUMO
BACKGROUND: Lateral wedge insoles (both standalone and those incorporating individualized arch support) have been frequently studied for the effects on knee joint loading and pain in people with knee osteoarthritis. It has been shown that many people who use these insoles do not obtain the intended biomechanical effect, and thus may not experience a clinical benefit. The ability to identify biomechanical responders to lateral wedge insoles before research or clinical intervention is an important objective for efficient resource use and optimizing patient outcomes. The purpose of our exploratory, hypothesis-generating study was to provide an initial assessment of variables that are associated with the biomechanical response to lateral wedge insoles in people with knee osteoarthritis. METHODS: We collected a number of demographic (age, sex, body mass index, foot posture), clinical (knee pain, foot pain, radiographic disease severity), and walking-related (speed, knee alignment, frontal plane subtalar movement, and foot rotation) outcomes from 53 individuals with painful, radiographically-confirmed knee osteoarthritis. The walking-related outcomes were obtained using equipment both from the research laboratory and the clinical setting. We used logistic regression to generate predictive models to determine candidate variables associated with a reduction in the knee adduction moment during walking - a surrogate for tibiofemoral load distribution, and a known biomechanical risk factor for osteoarthritis progression - with the use of standalone and arch-supported lateral wedge insoles. Three different response thresholds (2%, 6%, and 10% reductions in the knee adduction moment) were used. RESULTS: In general, biomechanical responders were those who walked faster, were female, had less varus alignment, and had less severe radiographic severity. Findings were similar between the standalone and arch-supported lateral wedge insoles, as well as between models using the laboratory-derived or clinically-available measures of walking performance. CONCLUSIONS: Our hypothesis-generating study provides valuable information that will inform future research into the efficient and effective use of lateral wedge insoles in the conservative management of knee osteoarthritis.
Assuntos
Órtoses do Pé , Osteoartrite do Joelho , Humanos , Feminino , Masculino , Osteoartrite do Joelho/terapia , Fenômenos Biomecânicos/fisiologia , Articulação do Joelho/fisiologia , Caminhada/fisiologia , Dor , Marcha/fisiologiaRESUMO
To compare the inter-session placement reliability for researcher-placed and self-placed sensors, and to evaluate the validity and reliability of waveforms and discrete variables from researcher-placed and self-placed sensors following a previously described alignment correction algorithm. Fourteen healthy, pain-free participants underwent gait analysis over two data collection sessions. Participants self-placed an inertial sensor on their left tibia and a researcher placed one on their right tibia, before completing 10 overground walking trials. Following an axis correction from a principal component analysis-based algorithm, validity and reliability were assessed within and between days for each sensor placement type through Euclidean distances, waveforms, and discrete outcomes. The placement location of researcher-placed sensors exhibited good inter-session reliability (ICC = 0.85) in comparison to self-placed sensors (ICC = 0.55). Similarly, waveforms from researcher-placed sensors exhibited excellent validity across all variables (CMC ≥ 0.90), while self-placed sensors saw high validity for most axes with reductions in validity for mediolateral acceleration and frontal plane angular velocity. Discrete outcomes saw good to excellent reliability across both sensor placement types. A simple alignment correction algorithm for inertial sensor gait data demonstrated good to excellent validity and reliability in self-placed sensors with no additional data or measures. This method can be used to align sensors easily and effectively despite sensor placement errors during straight, level walking to improve 3D gait data outcomes in data collected with self-placed sensors.
Assuntos
Marcha , Dispositivos Eletrônicos Vestíveis , Aceleração , Humanos , Reprodutibilidade dos Testes , CaminhadaRESUMO
BACKGROUND: Lateral wedge insoles (LWI), standalone or with medial arch support (supported-LWI), have been thoroughly investigated for their effects on modifying gait biomechanics for people with knee osteoarthritis. However, plantar pressure distribution between these insole types has not been investigated and could provide insight towards insole prescription with concomitant foot symptoms taken into consideration. METHODS: In a sample of healthy individuals (n = 40), in-shoe plantar pressure was measured during walking with LWI, with or without medial arch support (variable- and uniform-stiffness designs), and a flat control insole condition. Pressure data from the plantar surface of the foot were divided into seven regions: medial/lateral rearfoot, midfoot, medial/central/lateral forefoot, hallux. Plantar pressure outcomes assessed were the medial-lateral pressure index (MLPI) for the whole foot, and the peak pressure, pressure-time integral (PTI), and contact area in each plantar region. Comfort in each insole condition was rated as a change relative to the flat control insole condition. Repeated-measures analyses of variance were calculated to compare the plantar pressure outcomes between insole conditions. RESULTS: Regionally, medial rearfoot and forefoot pressure were reduced by all wedged insoles, with the variable-stiffness supported-wedge showing greater reductions than the standalone wedge. Lateral rearfoot and forefoot pressure were reduced by both supported-LWI, but unchanged by the standalone wedge. In the midfoot, the standalone wedge maintained pressure but reduced regional contact area, while both supported-LWI increased midfoot pressure and contact area. All LWI increased the MLPI, indicating a lateral shift in plantar pressure distribution throughout the weightbearing phase of gait. Comfort ratings were not significantly different between insole conditions. CONCLUSIONS: Regional differences in plantar pressure may help determine an appropriate lateral wedge insole variation to avoid exacerbation of concomitant foot symptoms by minimizing pressure in symptomatic regions. Lateral shifts in plantar pressure distribution were observed in all laterally wedged conditions, including one supported-LWI that was previously shown to be biomechanically ineffective for modifying knee joint load distribution. Thus, shifts in foot centre of pressure may not be a primary mechanism by which LWI can modify knee joint load distribution for people with knee osteoarthritis.
Assuntos
Órtoses do Pé , Sapatos , Pé , Marcha , Humanos , CaminhadaRESUMO
OBJECTIVE: Frontal plane knee alignment plays an integral role in tibiofemoral knee osteoarthritis development and progression. Accessible methods for obtaining direct or indirect measures of knee alignment may help inform clinical decision making when specialized equipment is unavailable. The present study evaluated the concurrent validity, as well as intersession (within-rater) and interrater (within-session) reliability of smartphone inclinometry for measuring static frontal plane tibial alignment-a known proxy of frontal plane knee alignment. METHODS: Twenty healthy individuals and 38 patients with knee osteoarthritis were measured for frontal plane tibial alignment by a pair of raters using smartphone inclinometry, manual inclinometry, and 3-dimensional motion capture simultaneously. Healthy participants were measured on 2 separate days. Bland-Altman analysis, supplemented with intraclass correlation coefficient (ICC)(2,k), was used to assess concurrent validity. ICC(2,k), SEM, and minimum detectable change with 95% confidence limits (MDC95) were used to assess measurement reliability. RESULTS: Compared against motion capture, smartphone inclinometry measured frontal plane tibial alignment with a mean difference of 0.7 and 1.1 degrees (biased toward varus) for healthy participants and participants with knee osteoarthritis, respectively (ICC[2,k] ≥ 0.87). Smartphone inclinometry measurements demonstrated adequate intersession (within-rater) relative (ICC[2,k] = 0.91) and absolute (SEM = 0.7 degrees; MDC95 = 1.8 degrees) reliability, which outperformed manual inclinometry (ICC[2,k] = 0.85; SEM = 1.0 degrees; MDC95 = 2.6 degrees). Interrater (within-session) reliability of smartphone inclinometry was acceptable in both cohorts (ICC[2,k] = 0.93; SEM = 0.4 degrees to 1.2 degrees; MDC95 = 1.2 degrees to 3.2 degrees). CONCLUSION: Smartphone inclinometry is sufficiently valid and reliable for measuring frontal plane tibial alignment in healthy individuals and patients with medial tibiofemoral knee osteoarthritis. IMPACT: Smartphones are readily accessible by clinicians and researchers. Our assessment of measurement validity and reliability supports the use of smartphone inclinometry as a clinically available tool to measure frontal plane tibial alignment without medical imaging or specialized equipment.
Assuntos
Mau Alinhamento Ósseo/fisiopatologia , Aplicativos Móveis/estatística & dados numéricos , Osteoartrite do Joelho/fisiopatologia , Amplitude de Movimento Articular/fisiologia , Smartphone/normas , Tíbia/fisiologia , Adulto , Feminino , Humanos , Masculino , Reprodutibilidade dos Testes , Adulto JovemRESUMO
Cumulative shear strain of the subsynovial connective tissue (SSCT) surrounding finger flexor tendons plays a significant role in the development and progression of carpal tunnel syndrome. Biomechanical risk factors can alter tendon-SSCT shear strain but the effects of external mechanical compression and localized ischemia have yet to be investigated. In a laboratory study with 19 healthy participants, color Doppler ultrasound imaging was used to quantify relative motion between the flexor digitorum superficialis tendon and SSCT during repetitive finger flexion-extension under various conditions of external mechanical compression (palmar and forearm compression), ischemia and different movement speeds (0.75 and 1.25 Hz). Forearm compression reduced tendon displacement (baseline = 28.5 ± 4.1 mm vs. forearm = 27.0 ± 4.6 mm; p = 0.043) and showed a trend for reduced SSCT displacement, while palmar compression had no significant effects on tendon-SSCT motion. Compared with baseline, partial ischemia decreased SSCT displacement (baseline = 22.9 ± 3.3 mm vs. ischemia = 22.0 ± 3.3 mm; p = 0.015), while tendon displacement remained unchanged. In all experimental conditions, faster movements elicited greater tendon-SSCT relative motion. Our findings suggest that palmar compression may not negatively impact tendon-SSCT relative motion, but forearm compression may require further investigation. Localized ischemia in the forearm may alter the gliding conditions within the carpal tunnel and affect tendon-SSCT relative motion, which bridges an important gap between blood flow in the carpal tunnel and shear injury risk. These findings contribute to the growing body of literature, supporting the role that cumulative tendon-SSCT shear injury may have on the pathomechanics of carpal tunnel syndrome. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 38:1038-1044, 2020.
Assuntos
Síndrome do Túnel Carpal/etiologia , Dedos/fisiopatologia , Isquemia/fisiopatologia , Tendões/fisiopatologia , Adulto , Feminino , Dedos/diagnóstico por imagem , Voluntários Saudáveis , Humanos , Isquemia/diagnóstico por imagem , Masculino , Tendões/diagnóstico por imagem , Ultrassonografia Doppler em Cores , Adulto JovemRESUMO
BACKGROUND: Novel designs of lateral wedge insoles with arch support can alter walking biomechanics as a conservative treatment option for knee osteoarthritis. However, variations in foot posture may influence individual responses to insole intervention and these effects are not yet known. RESEARCH QUESTION: How does foot posture influence biomechanical responses to novel designs of lateral wedge insoles with arch support? METHODS: This exploratory biomechanical investigation categorized forty healthy volunteers (age 23-34) into pronated (nâ¯=â¯16), neutral (nâ¯=â¯15), and supinated (nâ¯=â¯9) foot posture groups based on the Foot Posture Index. Three-dimensional gait analysis was conducted during walking with six orthotic insole conditions: flat control, lateral wedge, uniform-stiffness arch support, variable-stiffness arch support, and lateral wedgeâ¯+â¯each arch support. Frontal plane knee and ankle/subtalar joint kinetic and kinematic outcomes were compared among insole conditions and foot posture groups using a repeated measures analysis of variance. RESULTS: The lateral wedge alone and lateral wedgeâ¯+â¯variable-stiffness arch support were the only insole conditions effective at reducing the knee adduction moment. However, the lateral wedgeâ¯+â¯variable-stiffness arch support had a smaller increase in peak ankle/subtalar eversion moment than the lateral wedge alone. Supinated feet had smaller ankle/subtalar eversion excursion and moment impulse than neutral and pronated feet, across all insole conditions. SIGNIFICANCE: Supinated feet have less mobile ankle/subtalar joints than neutral and pronated feet and, as a result, may be less likely to respond to biomechanical intervention from orthotic insoles. Supported lateral wedge insoles incorporating an arch support design that is variable-stiffness may be better than uniform-stiffness since reductions in the knee adduction moment can be achieved while minimizing increases in the ankle/subtalar eversion moment.
Assuntos
Fenômenos Biomecânicos/fisiologia , Órtoses do Pé/provisão & distribuição , Marcha/fisiologia , Postura/fisiologia , Caminhada/fisiologia , Adulto , Feminino , Voluntários Saudáveis , Humanos , Masculino , Adulto JovemRESUMO
The shoulder allows kinematic and muscular changes to facilitate continued task performance during prolonged repetitive work. The purpose of this work was to examine changes during simulated repetitive work in response to a fatigue protocol. Participants performed 20 one-minute work cycles comprised of 4 shoulder centric tasks, a fatigue protocol, followed by 60 additional cycles. The fatigue protocol targeted the anterior deltoid and cycled between static and dynamic actions. EMG was collected from 14 upper extremity and back muscles and three-dimensional motion was captured during each work cycle. Participants completed post-fatigue work despite EMG manifestations of muscle fatigue, reduced flexion strength (by 28%), and increased perceived exertion (â¼3 times). Throughout the post-fatigue work cycles, participants maintained performance via kinematic and muscular adaptations, such as reduced glenohumeral flexion and scapular rotation which were task specific and varied throughout the hour of simulated work. By the end of 60 post-fatigue work cycles, signs of fatigue persisted in the anterior deltoid and developed in the middle deltoid, yet perceived exertion and strength returned to pre-fatigue levels. Recovery from fatigue elicits changes in muscle activity and movement patterns that may not be perceived by the worker which has important implications for injury risk.
Assuntos
Adaptação Fisiológica/fisiologia , Movimento/fisiologia , Fadiga Muscular/fisiologia , Recuperação de Função Fisiológica/fisiologia , Ombro/fisiologia , Fenômenos Biomecânicos/fisiologia , Eletromiografia/métodos , Humanos , Masculino , Músculo Esquelético/fisiologia , Amplitude de Movimento Articular/fisiologia , Escápula/fisiologia , Adulto JovemRESUMO
Upper extremity muscle fatigue is challenging to identify during industrial tasks and places changing demands on the shoulder complex that are not fully understood. The purpose of this investigation was to examine adaptation strategies in response to isolated anterior deltoid muscle fatigue while performing simulated repetitive work. Participants completed two blocks of simulated repetitive work separated by an anterior deltoid fatigue protocol; the first block had 20 work cycles and the post-fatigue block had 60 cycles. Each work cycle was 60s in duration and included 4 tasks: handle pull, cap rotation, drill press and handle push. Surface EMG of 14 muscles and upper body kinematics were recorded. Immediately following fatigue, glenohumeral flexion strength was reduced, rating of perceived exertion scores increased and signs of muscle fatigue (increased EMG amplitude, decreased EMG frequency) were present in anterior and posterior deltoids, latissimus dorsi and serratus anterior. Along with other kinematic and muscle activity changes, scapular reorientation occurred in all of the simulated tasks and generally served to increase the width of the subacromial space. These findings suggest that immediately following fatigue people adapt by repositioning joints to maintain task performance and may also prioritize maintaining subacromial space width.
Assuntos
Adaptação Fisiológica/fisiologia , Movimento/fisiologia , Fadiga Muscular/fisiologia , Amplitude de Movimento Articular/fisiologia , Ombro/fisiologia , Fenômenos Biomecânicos/fisiologia , Eletromiografia/métodos , Humanos , Masculino , Músculo Esquelético/fisiologia , Escápula/fisiologia , Articulação do Ombro/fisiologia , Adulto JovemRESUMO
A kinematic model representing the versatility of the human hand is needed to evaluate biomechanical function and predict injury risk in the workplace. We improved upon an existing optoelectronic-based kinematic hand model with grouped metacarpals by defining segmented metacarpals and adding the trapeziometacarpal joint of the thumb. Eight participants performed three static postures (neutral pose, cylinder grip, cap grip) to evaluate kinematic performance of three different models, with one, two, and four metacarpal segment(s). Mean distal transverse metacarpal arch angles in the four-segment metacarpal model were between 22.0° ± 3.3° (neutral pose) and 32.1° ± 3.7° (cap grip). Representation of the metacarpals greatly influenced metacarpophalangeal joint rotations. Both the two- and four-segment metacarpal models displayed significantly lower metacarpophalangeal joint 'supination' angles (than the one-segment model) for the fourth and fifth fingers. However, the largest reductions were for the four- versus one-segment models, with mean differences ranging from 9.3° (neutral pose) to 17.0° (cap grip) for the fourth finger and 16.3° (neutral pose) to 33.0° (cylinder grip) for the fifth finger. MCP joint abduction/adduction angles of the fourth and fifth fingers also decreased with segmentation of the metacarpals, although the lowest magnitudes generally occurred in the four-segment model. Overall, the four-segment metacarpal model produced the lowest accessory rotations in non-dominant axes, and best matched previous radiological studies that found MCP joint pronation/supination angles were typically less than 10°. The four-segment metacarpal model, with improved anatomic fidelity, will better serve future studies of detailed actions of the hand in clinical or work applications.