Calprotectin (S100A8/A9) Is an Innate Immune Effector in Experimental Periodontitis.

Upregulated in inflammation, calprotectin (complexed S100A8 and S100A9; S100A8/A9) functions as an innate immune effector molecule, promoting inflammation, and also as an antimicrobial protein. We hypothesized that antimicrobial S100A8/A9 would mitigate change to the local microbial community and promote resistance to experimental periodontitis in vivo. To test this hypothesis, S100A9-/- and wild-type (WT; S100A9+/+) C57BL/6 mice were compared using a model of ligature-induced periodontitis. On day 2, WT mice showed fewer infiltrating innate immune cells than S100A9-/- mice; by day 5, the immune cell numbers were similar. At 5 days post ligature placement, oral microbial communities sampled with swabs differed significantly in beta diversity between the mouse genotypes. Ligatures recovered from molar teeth of S100A9-/- and WT mice contained significantly dissimilar microbial genera from each other and the overall oral communities from swabs. Concomitantly, the S100A9-/- mice had significantly greater alveolar bone loss than WT mice around molar teeth in ligated sites. When the oral microflora was ablated by antibiotic pretreatment, differences disappeared between WT and S100A9-/- mice in their immune cell infiltrates and alveolar bone loss. Calprotectin, therefore, suppresses emergence of a dysbiotic, proinflammatory oral microbial community, which reduces innate immune effector activity, including early recruitment of innate immune cells, mitigating subsequent alveolar bone loss and protecting against experimental periodontitis.

The Oral Bacterium Fusobacterium nucleatum Binds Staphylococcus aureus and Alters Expression of the Staphylococcal Accessory Regulator sarA.

Staphylococcus aureus, an opportunistic pathogen member of the nasal and skin microbiota, can also be found in human oral samples and has been linked to infectious diseases of the oral cavity. As the nasal and oral cavities are anatomically connected, it is currently unclear whether S. aureus can colonize the oral cavity and become part of the oral microbiota, or if its presence in the oral cavity is simply transient. To start addressing this question, we assessed S. aureus ability to directly bind selected members of the oral microbiota as well as its ability to integrate into a human-derived complex oral microbial community in vitro. Our data show that S. aureus forms aggregates with Fusobacterium nucleatum and Porphyromonas gingivalis and that it can incorporate into the human-derived in vitro oral community. Further analysis of the F. nucleatum-S. aureus interaction revealed that the outer-membrane adhesin RadD is partially involved in aggregate formation and that the RadD-mediated interaction leads to an increase in expression of the staphylococcal global regulator gene sarA. Our findings lend support to the notion that S. aureus can become part of the complex microbiota of the human mouth, which could serve as a reservoir for S. aureus. Furthermore, direct interaction with key members of the oral microbiota could affect S. aureus pathogenicity contributing to the development of several S. aureus associated oral infections.

A strategy to optimize precompression pressure for tablet manufacturing based on in-die elastic recovery.

A precompression pressure optimization strategy using in-die elastic recovery was developed to effectively address tablet lamination caused by air entrapment. This strategy involves exacerbating the air entrapment issue using high tableting speeds and main compaction pressures and collecting in-die elastic recovery data as a function of precompression pressure. The optimized precompression pressure, which corresponds to the minimum elastic recovery, is most effective at eliminating air from the powder bed prior to the main compression. When the optimized precompression pressure was employed, intact tablets of a model blend prone to lamination due to air entrapment could be produced over a wide range of high main compaction pressures, while tablets without precompression laminated immediately after ejection at equivalent main compaction pressures. This optimization strategy is effective for addressing lamination issues due to air entrapment using precompression. An advantage of this strategy is that intact tablets are not required to identify an optimized precompression pressure since elastic recovery measurements occur in-die.

Cocrystallization improves the tabletability of ligustrazine despite a reduction in plasticity.

Cocrystallization is an effective method for altering the tableting performance of crystals by modifying their mechanical properties. In this study, cocrystals of ligustrazine (LIG) with malonic acid (MA) and salicylic acid (SA) were investigated to better understand how modifying crystal structure can affect tableting properties. LIG suffered from overcompression at high pressures despite its high plasticity. Both LIG-MA and LIG-SA displayed lower plasticity than LIG, which was confirmed by both an in-die Heckel and energy framework analyses. The LIG-MA cocrystal displayed slightly worse tabletability than LIG, as expected from its lower plasticity. However, LIG-SA surprisingly showed improved tabletability despite its lower plasticity. This was explained by the higher bonding strength of LIG-SA compared with LIG. This work not only provided new examples of tabletability modulation through crystal engineering but also highlighted the risk of failed tabletability predictions based on plasticity alone. Instead, more reliable tabletability predictions of different crystal forms must consider the bonding area - bonding strength interplay.

An approach for predicting the true density of powders based on in-die compression data.

Helium pycnometry, a commonly used technique for measuring the true density of powders, is sensitive to the release of volatiles during measurement. This can lead to over-estimated true density, and as such, an accurate method for determining the true density of powders containing volatile components is needed. Here, a method based on in-die compression data obtained with a compaction simulator was assessed. Specifically, the stress transmission coefficient (STC), measured using an instrumented die, was used to predict the in-die Heckel mean yield pressure (Py). A true density was derived by repeatedly performing a Heckel analysis using iteratively estimated true density values until the predicted Py value from the measured STC value is obtained from in-die density - pressure data. This novel method was validated using a set of water-free powders. Using crystalline hydrates, we further showed that the calculated true densities were closer to values calculated from crystal structure than those from helium pycnometry. Hence, this method may be used for determining the true density of powders from their STC values.

A material-sparing simplified buoyancy method for determining the true density of solids.

True density is an important physical property of powdered materials, especially in the context of powder compaction. Currently available methods for true density determination either require a significant amount of materials or are laborious. Hence, a material-sparing and efficient method for true density determination is of value. In this work, we detail a simplified buoyancy-based method capable of fast determination of true density with accuracy comparable to helium pycnometry. This miniaturized method only uses a few milligrams of a powder with data collection process expedited by centrifugation in a laboratory centrifuge. This method can be easily adapted in a laboratory since determination of true density only requires a balance, a micropipette, a laboratory centrifuge, and standard stock liquids of low and high densities. Hence, it is a useful addition to the materials characterization tool kit critical for pharmaceutical formulation development.

Air entrapment during tablet compression - Diagnosis, impact on tableting performance, and mitigation strategies.

Air entrapment during powder compression, a phenomenon that can cause tablet defects upon decompression and ejection, was diagnosed for celecoxib powder by comparing its in-die elastic recovery profiles with and without precompression prior to the main compression. Without precompression, the elastic recovery of celecoxib compacts significantly increased from ∼4% at a main compaction pressure of 150 MPa to ∼14% at and above 200 MPa. The large increase in elastic recovery is eliminated when a precompression step is employed. The deaeration of powder by precompression resulted in higher tablet strength, accompanied by lower tablet porosity. Thus, precompression is an effective strategy to mitigate the deleterious effects of air entrapment in tablet manufacturing. We also found that, although entrapped air caused significantly higher elastic recovery, it does not affect the plasticity parameter derived from an in-die Heckel analysis.

Mean yield pressure from the in-die Heckel analysis is a reliable plasticity parameter.

Despite the ability to characterize the plasticity of powders in a material-sparing and expedited manner, the in-die Heckel analysis has been widely criticized for its sensitivity to several factors, such as particle elastic deformation, tooling size, lubrication, and speed. Using materials exhibiting a wide range of mechanical properties, we show that the in-die P y correlates strongly with three established plasticity parameters obtained from the out-of-die Heckel analysis, Kuentz-Leuenberger analysis, and macroindentation. Thus, the in-die P y is a reliable parameter for quantifying powder plasticity in a material-sparing and expedited manner.

Streptococcus gordonii Type I Lipoteichoic Acid Contributes to Surface Protein Biogenesis.

Lipoteichoic acid (LTA) is an abundant polymer of the Gram-positive bacterial cell envelope and is essential for many species. Whereas the exact function of LTA has not been elucidated, loss of LTA in some species affects hydrophobicity, biofilm formation, and cell division. Using a viable LTA-deficient strain of the human oral commensal Streptococcus gordonii, we demonstrated that LTA plays an important role in surface protein presentation. Cell wall fractions derived from the wild-type and LTA-deficient strains of S. gordonii were analyzed using label-free mass spectroscopy. Comparisons showed that the abundances of many proteins differed, including (i) SspA, SspB, and S. gordonii 0707 (SGO_0707) (biofilm formation); (ii) FtsE (cell division); (iii) Pbp1a and Pbp2a (cell wall biosynthesis and remodeling); and (iv) DegP (envelope stress response). These changes in cell surface protein presentation appear to explain our observations of altered cell envelope homeostasis, biofilm formation, and adhesion to eukaryotic cells, without affecting binding and coaggregation with other bacterial species, and provide insight into the phenotypes revealed by the loss of LTA in other species of Gram-positive bacteria. We also characterized the chemical structure of the LTA expressed by S. gordonii Similarly to Streptococcus suis, S. gordonii produced a complex type I LTA, decorated with multiple d-alanylations and glycosylations. Hence, the S. gordonii LTA appears to orchestrate expression and presentation of cell surface-associated proteins and functions.IMPORTANCE Discovered over a half-century ago, lipoteichoic acid (LTA) is an abundant polymer found on the surface of Gram-positive bacteria. Although LTA is essential for the survival of many Gram-positive species, knowledge of how LTA contributes to bacterial physiology has remained elusive. Recently, LTA-deficient strains have been generated in some Gram-positive species, including the human oral commensal Streptococcus gordonii The significance of our research is that we utilized an LTA-deficient strain of S. gordonii to address why LTA is physiologically important to Gram-positive bacteria. We demonstrate that in S. gordonii, LTA plays an important role in the presentation of many cell surface-associated proteins, contributing to cell envelope homeostasis, cell-to-cell interactions in biofilms, and adhesion to eukaryotic cells. These data may broadly reflect a physiological role of LTA in Gram-positive bacteria.