Micellar liquid chromatographic determination of metformin hydrochloride using fluorimetric detection after pre-column derivatization: application to pharmacokinetic parameters in immediate and sustained release formulations.

An accurate and selective method using micellar liquid chromatography was developed to determine metformin hydrochloride both in its pharmaceutical dosage forms and human plasma. Separation was conducted using a Zorbax SB-Phenyl (250 × 4.6 mm id) stainless steel column at ambient temperature after pre-column derivatization with 9,10-phenanthraquinone. A mobile phase composed of 0.1 M sodium dodecyl sulfate, 10% 1-propanol and triethylamine (0.3%) in 0.02 M phosphoric acid, adjusted to pH 2.5, was used at a flow rate of 1 ml/min with fluorimetric detection at 450 nm after excitation at 306 nm. The proposed method showed high sensitivity with limit of quantification of 0.35 µg/ml and limit of detection of 0.23 µg/ml, being linear from 0.5 to 3.0 µg/ml. Being highly sensitive, the method could be applied to spiked human plasma, and also to follow the pharmacokinetic parameters of the studied drug in healthy volunteers after administration of both its immediate and sustained release tablet formulations. Such procedures were carried out without any extraction steps, which improves the accuracy and precision of the proposed method when applied to human plasma. Detailed validation procedures were also carried out giving results in accordance with the comparison method. The proposed method has also the advantage of being environmentally safe, where the use of organic solvents is highly limited in comparison with other traditional chromatographic separation methods that depend mainly on a high proportion of organic modifiers. This concept, in turn, emphasizes the application of green chemistry in the analysis of pharmaceutical products. The simplicity, relatively low cost and short analysis time of the suggested method makes it a candidate for routine quality control work.

Experimentally designed potentiometric sensor for green real-time and direct assay of hazardous bromate in bakery products.

Bakeries add extra potassium bromate to the dough to make homogeneous, elastic, fluffy bread. Bromate causes renal damage and cancer. FAO/WHO stated that bromate residues shouldn't be in baked products. A potentiometric sensor's membrane recipe was optimized for sensitive and selective bromate assay. We planned a custom experimental design of 21 sensors that included numerical and categorical factors (NPPE: PVC, matrix%, membrane thickness, and ionophore type). We defined sensor performance outcomes (Nernstian slope, quantification limit, correlation coefficient, response time and selectivity), and each sensor's outcome was determined. The computer software developed a predictive model for each outcome and the desirability function suggested the optimum sensor recipe. The sensor achieved a slope of -63.54 mV/decade and detection limit of 2 × 10-6 mol/L. The greenness profile was evaluated by the National Environmental Approach Index protocol. The developed sensor represents a reliable, fast, in-site tool for the assay of bromate in bakery products.

Green approach for tracking the photofate of ciprofloxacin and levofloxacin in different matrices adopting synchronous fluorescence spectroscopy: a kinetic study.

First derivative synchronous fluorescence spectroscopy (FDSFS) was applied to detect and quantify either ciprofloxacin (CIP) or levofloxacin (LEV) simultaneously with their photodegradation products, where the photolytic pathway for each analyte was found to be pH dependent. Under the guidance of early published articles, the structure of the produced photolytic products could be concluded, and further related to their resultant fluorescence spectra. The proposed method was subjected to full validation procedure which enables its application in investigating the photodegradation kinetics for both drugs. The obtained kinetic parameters were in accordance with previous reports and could be linked to predict the antibacterial activity of the resultant photodegradation products. These facts prove the suitability of the suggested FDSFS to serve as a stability-indicating assay method and to trace the photofate of CIP and LEV in the ecosystem as potential contaminants. Furthermore, the greenness of the suggested analytical methodology was evaluated via 'Green Analytical Procedure Index' (GAPI), which classifies it as an eco-friendly assay. Eventually, no extraction, treatment or preparation steps were needed during all analysis steps, which renders the proposed assay an appealing tool in environmental analysis.

Validated spectroflurimetric determination of some H1 receptor antagonist drugs in pharmaceutical preparations through charge transfer complexation.

A validated simple, rapid, and selective spectrofluorimetric method was developed for the determination of some antihistaminic H(1) receptor antagonist drugs namely ebastine (EBS), cetirizine dihydrochloride (CTZ), and fexofenadine hydrochloride (FXD). The method is based on the reaction of the cited drugs with some Π acceptors namely p-chloranilic acid (CLA), tetracyanoethylene (TCNE), and 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) to give highly fluorescent derivatives. The fluorescence intensity-concentration plots were rectilinear over the concentration ranges of 0.2-3.0, 0.2-2.5 and 0.15-2.0 µg/ml for EBS with CLA, DDQ, and TCNE respectively; 0.5-7.0, 0.5-6.0, and 0.2-4.0 µg/ml for CTZ with the previously mentioned reagents, and 0.2-3.5, 0.5-6.0, and 0.2-3.5 µg/ml for FXD. The factors affecting the formation of the reaction products were carefully studied and optimized. The method was applied for the determination of the studied drugs in their dosage forms. The results obtained were in good agreement with those obtained by the comparison methods. Reactions Stoichiometries of the complexes formed between the studied drugs and Π acceptors were defined by the Job's method of the continuous variation and found in 1:1 in all cases.

Studying the effect of vasopressors on therapeutic drug monitoring of two local anesthetics using hybrid micelle liquid chromatography as an analysis tool.

A hybrid micelle based mobile phase was used to develop and validate a liquid chromatographic method for the separation and quantification of two local anesthetics namely; lidocaine hydrochloride (LID), and bupivacaine hydrochloride (BPV) in presence of the frequently co administered vasopressors phenyl ephrine (PHR) and ephedrine (EPH). Optimization of chromatographic separation conditions was performed applying experimental one factor at a time tool, and design of experiment, where the retention behavior of all analytes using both optimization protocols was in accordance. Chromatographic separation was carried on a C8 column operating at 40 °C at a flow rate of 1.5 mL/min. using a mobile phase consisting of 0.18 M sodium dodecyl sulphate, 10% acetonitrile, containing 0.3% triethyl amine and adjusted to pH 7 using 2 M ortho phosphoric acid, adopting UV detection at 230 nm. The proposed method was fully validated and applied to both in vitro and in vivo analysis of rat blood samples. The pharmacokinetics of both LID and BPV was followed when they were solitary injected or when co administered with either PHR or EPH. Moreover, the in vitro spiked experiment was also subjected to documented bio-analytical validation procedures.

Studying drug-drug interaction through chromatographic analysis of two mixtures offering antimicrobial synergism.

Micellar mobile phase was utilized for the separation and quantification of two antimicrobial mixtures with some analgesics that were found to augment their antimicrobial activity, namely; cefotaxime sodium (CFX) with ibuprofen (IBU) and naproxen (NPX) (mixture Ι), and azithromycin dihydrate (AZT) with diclofenac sodium (DIC) (mixture ΙΙ). Both mixtures were analyzed using a C18 column operated at 50 °C using a mobile phase composed of sodium dodecyl sulphate (SDS), an organic modifier; (1-propanol or acetonitrile), and 0.3% triethylamine (TEA), adjusting pH to the required value with 2 M orthro-phosphoric acid, accompanied with UV detection. The proposed method was subjected to full validation procedure and was applied to determine the concentration of the studied antibiotics in homogenized liver, kidney and heart rat tissue samples, with or without the co-administered non steroidal anti-inflammatory drugs.

Validation of a micellar liquid chromatographic method for determination of caffeine and non-steroidal anti-inflammatories.

An accurate, simple, sensitive and selective micellar liquid chromatographic method has been developed for the simultaneous determination of caffeine (CAF) and two non-steroidal anti-inflammatory drugs, namely ibuprofen (IBU) and ketoprofen (KET). The chemometric approach was applied to the optimization of separation of the studied drugs. To optimize their separation, the effect of six experimental parameters on retention was investigated by means of multivariate analysis. Separation was conducted using an ODS C18 (150 × 4.6 mm i.d.) stainless steel column at ambient temperature with UV detection at 260 nm. A mobile phase composed of 40 mM sodium dodecyl sulphate (SDS), 10% 1-propanol and 0.3% tri-ethylamine in 0.02 M phosphoric acid adjusted to pH 3 has been used at a flow rate of 1 mL/min. Regression models were characterized by both descriptive and predictive ability (R(2) ≥ 97.9% and R(cv)(2) ≥ 96.2%) and allowed the chromatographic separation of the drugs with a good resolution and a total analysis time within 15 min. The calibration curves were rectilinear over the concentration ranges of 2.0-25.0, 1.5-15.0 and 1.0-10.0 µg/mL for IBU, KET and CAF, respectively, with detection limits of 1.2, 1.0 and 0.6 µg/mL, and quantification limits of 1.6, 1.2 and 0.8 µg/mL, respectively. The results obtained were in good agreement with those obtained by the comparison method.