RESUMO
Rechargeable sodium-ion batteries (SIBs) have emerged as an advanced electrochemical energy storage technology with potential to alleviate the dependence on lithium resources. Similar to Li-ion batteries, the cathode materials play a decisive role in the cost and energy output of SIBs. Among various cathode materials, Na layered transition-metal (TM) oxides have become an appealing choice owing to their facile synthesis, high Na storage capacity/voltage that are suitable for use in high-energy SIBs, and high adaptivity to the large-scale manufacture of Li layered oxide analogues. However, going from the lab to the market, the practical use of Na layered oxide cathodes is limited by the ambiguous understanding of the fundamental structure-performance correlation of cathode materials and lack of customized material design strategies to meet the diverse demands in practical storage applications. In this review, we attempt to clarify the fundamental misunderstandings by elaborating the correlations between the electron configuration of the critical capacity-contributing elements (e.g., TM cations and oxygen anion) in oxides and their influence on the Na (de)intercalation (electro)chemistry and storage properties of the cathode. Subsequently, we discuss the issues that hinder the practical use of layered oxide cathodes, their origins and the corresponding strategies to address their issues and accelerate the target-oriented research and development of cathode materials. Finally, we discuss several new Na layered cathode materials that show prospects for next-generation SIBs, including layered oxides with anion redox and high entropy and highlight the use of layered oxides as cathodes for solid-state SIBs with higher energy and safety. In summary, we aim to offer insights into the rational design of high-performance Na layered oxide cathode materials towards the practical realization of sustainable electrochemical energy storage at a low cost.
RESUMO
Insights into the formation mechanisms of two-dimensional covalent organic frameworks (2D COFs) at both the in-plane and interlayer levels are essential for improving material quality and synthetic methodology. Here, we report the controllable preparation of 2D COF films via on-surface synthesis and investigate the growth mechanism using atomic force microscopy. Monolayer, bilayer, and layer-plus-island multilayer COF films were successfully constructed on hexagonal boron nitride in a controlled manner. The porphyrin-based COF films grow in the Stranski-Krastanov mode, i.e., a uniform bilayer COF film can be formed through layer-by-layer growth in the initial stage followed by island growth starting from the third layer. Furthermore, fluorescence quenching caused by π-π stacking interactions between 2D COF neighboring layers was revealed. These results provide new perspectives on the synthesis of high-quality 2D COF films with controllable thickness and morphology, paving the way for a diverse range of applications.
RESUMO
Ni-rich cathodes are some of the most promising candidates for advanced lithium-ion batteries, but their available capacities have been stagnant due to the intrinsic Li+ storage sites. Extending the voltage window down can induce the phase transition from O3 to 1T of LiNiO2-derived cathodes to accommodate excess Li+ and dramatically increase the capacity. By setting the discharge cutoff voltage of LiNi0.6Co0.2Mn0.2O2 to 1.4 V, we can reach an extremely high capacity of 393 mAh g-1 and an energy density of 1070 Wh kg-1 here. However, the phase transition causes fast capacity decay and related structural evolution is rarely understood, hindering the utilization of this feature. We find that the overlithiated phase transition is self-limiting, which will transform into solid-solution reaction with cycling and make the cathode degradation slow down. This is attributed to the migration of abundant transition metal ions into lithium layers induced by the overlithiation, allowing the intercalation of overstoichiometric Li+ into the crystal without the O3 framework change. Based on this, the wide-potential cycling stability is further improved via a facile charge-discharge protocol. This work provides deep insight into the overstoichiometric Li+ storage behaviors in conventional layered cathodes and opens a new avenue toward high-energy batteries.
RESUMO
Cross-coupling reactions represent an indispensable tool in chemical synthesis. An intriguing challenge in this field is to achieve selective cross-coupling between two precursors with similar reactivity or, to the limit, the identical molecules. Here we report an unexpected dehydrobrominative cross-coupling between 1,3,5-tris(2-bromophenyl)benzene molecules on silver surfaces. Using scanning tunneling microscopy, we examine the reaction process at the single-molecular level, quantify the selectivity of the dehydrobrominative cross-coupling, and reveal the modulation of selectivity by substrate lattice-related catalytic activity or molecular assembly effect. Theoretical calculations indicate that the dehydrobrominative cross-coupling proceeds via regioselective C-H bond activation of debrominated TBPB and subsequent highly selective C-C coupling of the radical-based intermediates. The reaction kinetics plays an important role in the selectivity for the cross-coupling. This work not only expands the toolbox for chemical synthesis but also provides important mechanistic insights into the selectivity of coupling reactions on the surface.
RESUMO
Visualizing lithium (Li) ions and understanding Li plating/stripping processes as well as evolution of solid electrolyte interface (SEI) are critical for optimizing all-solid-state Li metal batteries (ASSLMB). However, the buried solid-solid interfaces present a challenge for detection which preclude the employment of multiple analysis techniques. Herein, by employing complementary in situ characterizations, morphological/chemical evolution, Li plating/stripping dynamics and SEI dynamics were efficiently decoupled and Li ion behavior at interface between different solid-state electrolytes (SSE) was successfully detected. The innovative combining experiments of in situ atomic force microscopy and in situ X-ray photoelectron spectroscopy on Li metal anode revealed interfacial morphological/chemical evolution and decoupled Li plating/stripping process from SEI evolution. Though Li plating speed in Li10GeP2S12 (LGPS) was higher than Li3PS4 (LPS), speed of SSE decomposition was similar and ~85% interfacial SSE turned into SEI during plating and remained unchanged in stripping. To leverage strengths of different SSEs, an LPS-LGPS-LPS sandwich electrolyte was developed, demonstrating enhanced ionic conductivity and improved interfacial stability with less SSE decomposition (25%). Using in situ Kelvin Probe Force Microscopy, Li-ion behavior at interface between different SSEs was effectively visualized, uncovering distribution of Li ions at LGPS|LPS interface under different potentials.
RESUMO
Solid-state lithium-sulfur batteries have shown prospects as safe, high-energy electrochemical storage technology for powering regional electrified transportation. Owing to limited ion mobility in crystalline polymer electrolytes, the battery is incapable of operating at subzero temperature. Addition of liquid plasticizer into the polymer electrolyte improves the Li-ion conductivity yet sacrifices the mechanical strength and interfacial stability with both electrodes. In this work, we showed that by introducing a spherical hyperbranched solid polymer plasticizer into a Li+ -conductive linear polymer matrix, an integrated dynamic cross-linked polymer network was built to maintain fully amorphous in a wide temperature range down to subzero. A quasi-solid polymer electrolyte with a solid mass content >90 % was prepared from the cross-linked polymer network, and demonstrated fast Li+ conduction at a low temperature, high mechanical strength, and stable interfacial chemistry. As a result, solid-state lithium-sulfur batteries employing the new electrolyte delivered high reversible capacity and long cycle life at 25 °C, 0 °C and -10 °C to serve energy storage at complex environmental conditions.
RESUMO
Anode-free rechargeable sodium batteries represent one of the ultimate choices for the 'beyond-lithium' electrochemical storage technology with high energy. Operated based on the sole use of active Na ions from the cathode, the anode-free battery is usually reported with quite a limited cycle life due to unstable electrolyte chemistry that hinders efficient Na plating/stripping at the anode and high-voltage operation of the layered oxide cathode. A rational design of the electrolyte toward improving its compatibility with the electrodes is key to realize the battery. Here, we show that by refining the volume ratio of two conventional linear ether solvents, a binary electrolyte forms a cation solvation structure that facilitates flat, dendrite-free, planar growth of Na metal on the anode current collector and that is adaptive to high-voltage Na (de)intercalation of P2-/O3-type layered oxide cathodes and oxidative decomposition of the Na2C2O4 supplement. Inorganic fluorides, such as NaF, show a major influence on the electroplating pattern of Na metal and effective passivation of plated metal at the anode-electrolyte interface. Anode-free batteries based on the refined electrolyte have demonstrated high coulombic efficiency, long cycle life, and the ability to claim a cell-level specific energy of >300 Wh/kg.
RESUMO
Nickel-rich layered oxides (NLOs) are considered as one of the most promising cathode materials for next-generation high-energy lithium-ion batteries (LIBs), yet their practical applications are currently challenged by the unsatisfactory cyclability and reliability owing to their inherent interfacial and structural instability. Herein, we demonstrate an approach to reverse the unstable nature of NLOs through surface solid reaction, by which the reconstructed surface lattice turns stable and robust against both side reactions and chemophysical breakdown, resulting in improved cycling performance. Specifically, conformal La(OH)3 nanoshells are built with their thicknesses controlled at nanometer accuracy, which act as a Li+ capturer and induce controlled reaction with the NLO surface lattices, thereby transforming the particle crust into an epitaxial layer with localized Ni/Li disordering, where lithium deficiency and nickel stabilization are both achieved by transforming oxidative Ni3+ into stable Ni2+. An optimized balance between surface stabilization and charge transfer is demonstrated by a representative NLO material, namely, LiNi0.83Co0.07Mn0.1O2, whose surface engineering leads to a highly improved capacity retention and excellent rate capability with a strong capability to inhibit the crack of NLO particles. Our study highlights the importance of surface chemistry in determining chemical and structural behaviors and paves a research avenue in controlling the surface lattice for the stabilization of NLOs toward reliable high-energy LIBs.
RESUMO
In overcoming the Li+ desolvation barrier for low-temperature battery operation, a weakly-solvated electrolyte based on carboxylate solvent has shown promises. In case of an organic-anion-enriched primary solvation sheath (PSS), we found that the electrolyte tends to form a highly swollen, unstable solid electrolyte interphase (SEI) that shows a high permeability to the electrolyte components, accounting for quickly declined electrochemical performance of graphite-based anode. Here we proposed a facile strategy to tune the swelling property of SEI by introducing an inorganic anion switch into the PSS, via LiDFP co-solute method. By forming a low-swelling, Li3 PO4 -rich SEI, the electrolyte-consuming parasitic reactions and solvent co-intercalation at graphite-electrolyte interface are suppressed, which contributes to efficient Li+ transport, reversible Li+ (de)intercalation and stable structural evolution of graphite anode in high-energy Li-ion batteries at a low temperature of -20 °C.
RESUMO
The prosperity of the lithium-ion battery market is dialectically accompanied by the depletion of corresponding resources and the accumulation of spent batteries. It is an urgent priority to develop green and efficient battery recycling strategies for helping ease resources and environmental pressures at the current stage. Here, we propose a mild and efficient lithium extracting strategy based on potential controllable redox couples. Active lithium in the spent battery without discharging is extracted using a series of tailored aprotic solutions comprised of polycyclic aromatic hydrocarbons and ethers. This ensures a safe yet efficient recycling process with nearly ≈100 % lithium recovery. We further investigate the Li+ -electron concerted redox reactions and the effect of solvation structure on kinetics during the extraction, and broaden the applicability of the Li-PAHs solution. This work can stimulate new inspiration for designing novel solutions to meet efficient and sustainable demands in recycling batteries.
RESUMO
Layered transition metal oxide cathodes have been one of the dominant cathodes for lithium-ion batteries with efficient Li+ intercalation chemistry. However, limited by the weak layered interaction and unstable surface, mechanical and chemical failure plagues their electrochemical performance, especially for Ni-rich cathodes. Here, adopting a simultaneous elemental-structural atomic arrangement control based on the intrinsic Ni-Co-Mn system, the surface role is intensively investigated. Within the invariant oxygen sublattice of the crystal, a robust surface with the synergistic concentration gradient and layered-spinel intertwined structure is constructed on the model single-crystalline Ni-rich cathode. With mechanical strain dissipation and chemical erosion suppression, the cathode exhibits an impressive capacity retention of 82 % even at the harsh 60 °C after 150â cycles at 1â C. This work highlights the coupling effect of structure and composition on the chemical-mechanical properties, and the concept will spur more researches on the cathodes that share the same sublattice.
RESUMO
Chemically stable chromenoquinoline (CQ)-based covalent organic frameworks (COFs) were constructed by postsynthetic conversion of imine COFs. The key step of an intramolecular Povarov reaction can transform a preintegrated alkyne group to bridge the benzene rings on both sides of the imine linkage via chemical bonds, affording a ladder-type CQ linkage. This novel approach achieves a high cyclization degree of 80-90%, which endows the CQ-COFs with excellent chemical stability toward strong acid, base, and redox reagents. The synthetic approach can be applied to various monomers with different symmetries and functional core moieties. The absorption and fluorescence intensities of CQ-COFs are sensitive to acid, which allows for dual-mode sensing of strongly acidic environments.
RESUMO
We report herein the in situ electrochemical scanning tunneling microscopy (ECSTM) study on the synergistic effect of Mg2+ in CO2 reduction reaction (CO2RR) catalyzed by cobalt phthalocyanine (CoPc). ECSTM measurement molecularly resolves the self-assembled CoPc monolayer on the Au(111) substrate. In the CO2 environment, high-contrast species are observed in the adlayer and assigned to the CO2 adsorption on CoPc. Furthermore, the contrast of the CO2-bound complex is higher in Mg2+-containing electrolytes than in Mg2+-free electrolytes, indicating the formation of the CoPc-CO2-Mg2+ complex. The surface coverage of adsorbed CO2 is positively correlated with the Mg2+ concentration as the additive in electrolytes up to a plateau of 30.8 ± 2.7% when c(Mg2+) > 30 mM. The potential step experiment indicates the higher CO2 adsorption dynamics in Mg2+-containing electrolytes than without Mg2+. The rate constants of CO2 adsorption and dissociation in different electrolytes are extracted from the data fitting of statistical results from in situ ECSTM experiments.
Assuntos
Microscopia de Tunelamento , Compostos Organometálicos , Microscopia de Tunelamento/métodos , Dióxido de Carbono , OuroRESUMO
Single-crystalline Ni-rich cathodes with high capacity have drawn much attention for mitigating cycling and safety crisis of their polycrystalline analogues. However, planar gliding and intragranular cracking tend to occur in single crystals with cycling, which undermine cathode integrity and therefore cause capacity degradation. Herein, we intensively investigate the origin and evolution of the gliding phenomenon in single-crystalline Ni-rich cathodes. Discrete or continuous gliding forms are revealed with new surface exposure including the gliding plane (003) and reconstructed (-108) under surface energy drive. It is also demonstrated that the gliding process is the in-plane migration of transition metal ions, and reducing oxygen vacancies will increase the migration energy barrier by which gliding and microcracking can be restrained. The designed cathode with less oxygen deficiency exhibits outstanding cycling performance with an 80.8% capacity retention after 1000 cycles in pouch cells. Our findings provide an insight into the relationship between defect control and chemomechanical properties of single-crystalline Ni-rich cathodes.
RESUMO
All-carbon graphdiyne (GDY)-based materials have attracted extensive attention owing to their extraordinary structures and outstanding performance in electrochemical energy storage. Straightforward insights into the interfacial evolution at GDY electrode/electrolyte interface could crucially enrich the fundamental comprehensions and inspire targeted regulations. Herein, in situ optical microscopy and atomic force microscopy monitoring of the GDY and N-doped GDY electrodes reveal the interplay between the solid electrolyte interphase (SEI) and Li deposition. The growth and continuous accumulation of the flocculent-like SEI is directly tracked at the surface of GDY electrode. Moreover, the nanoparticle-shaped SEI homogeneously propagates at the interface when N configurations are involved, providing a critical clue for the N-doping effects of stabilizing interfaces and homogenizing Li deposition. This work probes into the dynamic evolution and structure-reactivity correlation in detail, creating effective strategies for GDY-based materials optimization in lithium-ion batteries.
RESUMO
The application of solid-state batteries (SSBs) is challenged by the inherently poor interfacial contact between the solid-state electrolyte (SSE) and the electrodes, typically a metallic lithium anode. Building artificial intermediate nanofilms is effective in tackling this roadblock, but their implementation largely relies on vapor-based techniques such as atomic layer deposition, which are expensive, energy-intensive, and time-consuming due to the monolayer deposited per cycle. Herein, an easy and low-cost wet-chemistry fabrication process is used to engineer the anode/solid electrolyte interface in SSBs with nanoscale precision. This coordination-assisted deposition is initiated with polyacrylate acid as a functional polymer to control the surface reaction, which modulates the distribution and decomposition of metal precursors to reliably form a uniform crack-free and flexible nanofilm of a large variety of metal oxides. For demonstration, artificial Al2O3 interfacial nanofilms were deposited on a ceramic SSE, typically garnet-structured Li6.5La3Zr1.5Ta0.5O12 (LLZT), that led to a significant decrease in the Li/LLZT interfacial resistance (from 2079.5 to 8.4 Ω cm2) as well as extraordinarily long cycle life of the assembled SSBs. This strategy enables the use of a nickel-rich LiNi0.83Co0.07Mn0.1O2 cathode to deliver a reversible capacity of 201.5 mAh g-1 at a considerable loading of 4.8 mg cm-2, featuring performance metrics for an SSB that is competitive with those of traditional Li-ion systems. Our study demonstrates the potential of solution-based routes as an affordable and scalable manufacturing alternative to vapor-based deposition techniques that can accelerate the development of SSBs for practical applications.
RESUMO
Bladder cancer is a common urinary cancer that still lacks effective treatments. In the present study, we evaluated the effect of BET inhibitor, mivebresib, in combination with PZ703b, a Bcl-xl PROTAC, on apoptosis in bladder cancer cells. The results revealed that mivebresib and PZ703b synergistically decreased the viabilities of bladder cancer cells. Co-treatment of mivebresib and PZ703b induced apoptosis in bladder cancer cells via the mitochondrial pathway in a caspase-dependent manner. Mechanistically, mivebresib and PZ703b treatment inhibited the expression of Mcl-1 and Bcl-xl, accompanied by upregulation of Bim. Hence, co-treatment of mivebresib and PZ703b rebalanced the level of pro- and anti-apoptotic Bcl-2 proteins in cells. Further investigations showed that forced expression of Mcl-1 or Bcl-xl markedly protected bladder cancer cells from apoptosis induced by combination treatment of mivebresib and PZ703b. In addition, knockdown of Bim also inhibited the cell death induced by mivebresib/PZ703b in bladder cancer cells. In summary, our findings reveal that the combination treatment of mivebresib and PZ703b represents a novel promising strategy to treat bladder cancer.
Assuntos
Piridonas , Sulfonamidas , Neoplasias da Bexiga Urinária , Humanos , Apoptose , Proteínas Reguladoras de Apoptose/genética , Proteínas Reguladoras de Apoptose/metabolismo , Proteína bcl-X/genética , Proteína bcl-X/metabolismo , Linhagem Celular Tumoral , Proteína de Sequência 1 de Leucemia de Células Mieloides/metabolismo , Proteínas Proto-Oncogênicas c-bcl-2/genética , Proteínas Proto-Oncogênicas c-bcl-2/metabolismo , Piridonas/farmacologia , Sulfonamidas/farmacologia , Neoplasias da Bexiga Urinária/tratamento farmacológico , Neoplasias da Bexiga Urinária/genéticaRESUMO
Hollow carbon-based nanospheres (HCNs) have been demonstrated to show promising potential in a large variety of research fields, particularly electrochemical devices for energy conversion/storage. The current synthetic protocols for HCNs largely rely on template-based routes (TBRs), which are conceptually straightforward in creating hollow structures but challenged by the time-consuming operations with a low yield in product as well as serious environmental concerns caused by hazardous etching agents. Meanwhile, they showed inadequate ability to build complex carbon-related architectures. Innovative strategies for HCNs free from extra templates thus are highly desirable and are expected to not only ensure precise control of the key structural parameters of hollow architectures with designated functionalities, but also be environmentally benign and scalable approaches suited for their practical applications.In this Account, we outline our recent research progress on the development of template-free protocols for the creation of HCNs with a focus on the acquired mechanical insight into the hollowing mechanism when no extra templates were involved. We demonstrated that carbon-based particles themselves could act as versatile platforms to create hollow architectures through an effective modulation of their inner chemistry. By means of reaction control, the precursor particles were synthesized into solid ones with a well-designed inhomogeneity inside in the form of different chemical parameters such as molecular weight, crystallization degree, and chemical reactivity, by which we not only can create hollow structures inside particles but also have the ability to tune the key features including compositions, porosity, and dimensional architectures. Accordingly, the functionalities of the prepared HCNs could be systematically altered or optimized for their applications. Importantly, the discussed synthesis approaches are facile and environmentally benign processes with potential for scale-up production.The nanoengineering of HNCs is found to be of special importance for their application in a large variety of electrochemical energy storage and conversion systems where the charge transfer and structural stability become a serious concern. Particular attention in this Account is therefore directed to the potential of HCNs in battery systems such as sodium ion batteries (NIBs) and potassium ion batteries (KIBs), whose electrochemical performances are plagued by the destructive volumetric deformation and sluggish charge diffusion during the intercalation/deintercalation of large-size Na+ or K+. We demonstrated that precise control of the multidimensional factors of the HCNs is critical to offer an optimized design of sufficient reactive sites, excellent charge and mass transport kinetics, and resilient electrode structure and also provide a model system suitable for the study of complicated metal-ion storage mechanisms, such as Na+ storage in a hard carbon anode. We expect that this Account will spark new endeavors in the development of HCNs for various applications including energy conversion and storage, catalysis, biomedicine, and adsorption.
RESUMO
Understanding the mechanism of electrocatalytic reaction is important for the design and development of highly efficient electrocatalysts for energy technology. Investigating the surface structures of electrocatalysts and the surface processes in electrocatalytic reactions at the atomic and molecular scale is helpful to identify the catalytic role of active sites and further promotes the development of emerging electrocatalysts. Since it was invented, scanning tunnelling microscopy (STM) has become a powerful technique to investigate surface topographies and electronic properties at the nanoscale resolution. STM can be operated in diversified environments. Electrochemical STM can be used to investigate the surface processes during electrochemical reactions. Moreover, the critical intermediates in catalysis on catalyst surfaces can be identified by STM at low temperature or ultrahigh vacuum. STM has been extensively utilized in electrocatalysis research, including the structure-activity relationship of electrocatalysts, the distribution of active sites, and surface processes in electrocatalytic reactions. In this review, progress in the application of STM in electrocatalysis is systematically discussed. The construction of model electrocatalysts and electrocatalytic systems are summarized. Then, we present the STM investigation of electrocatalyst structures and surface processes related to electrocatalysis. Challenges and future developments in the field are discussed in the outlook.
RESUMO
The complexity of chemical compounds in lithium-ion batteries (LIBs) results in great difficulties in the extraction of multiple transition metals, which have similar physicochemical characteristics. Here, we propose a novel strategy for selective extraction of nickel, cobalt, and manganese from spent LiNix Coy Mn1-x-y O2 (NCM) cathode through the regulation of coordination environment. Depending on adjusting the composition of ligand in transition metal complexes, a tandem leaching and separation system is designed and finally enables nickel, cobalt, and manganese to enrich in the form of NiO, Co3 O4 , and Mn3 O4 with high recovery yields of 99.1 %, 95.1 %, and 95.3 %, respectively. We further confirm that the combination of different transition metals with well-designed ligands is the key to good selectivity. Through our work, fine-tuning the coordination environment of metal ions is proved to have great prospects in the battery recycling industry.