The evolution and diversification of oakleaf butterflies.

Oakleaf butterflies in the genus Kallima have a polymorphic wing phenotype, enabling these insects to masquerade as dead leaves. This iconic example of protective resemblance provides an interesting evolutionary paradigm that can be employed to study biodiversity. We integrated multi-omic data analyses and functional validation to infer the evolutionary history of Kallima species and investigate the genetic basis of their variable leaf wing patterns. We find that Kallima butterflies diversified in the eastern Himalayas and dispersed to East and Southeast Asia. Moreover, we find that leaf wing polymorphism is controlled by the wing patterning gene cortex, which has been maintained in Kallima by long-term balancing selection. Our results provide macroevolutionary and microevolutionary insights into a model species originating from a mountain ecosystem.

Gain-of-function of the 1-aminocyclopropane-1-carboxylate synthase gene ACS1G induces female flower development in cucumber gynoecy.

Unisexual flowers provide a useful system for studying plant sex determination. In cucumber (Cucumis sativus L.), three major Mendelian loci control unisexual flower development, Female (F), androecious [a; 1-aminocyclopropane-1-carboxylate {ACC} synthase 11, acs11], and Monoecious (M; ACS2), referred to here as the Female, Androecious, Monoecious (FAM) model, in combination with two genes, gynoecious (g, the WIP family C2H2 zinc finger transcription factor gene WIP1) and the ethylene biosynthetic gene ACC oxidase 2 (ACO2). The F locus, conferring gynoecy and the potential for increasing fruit yield, is defined by a 30.2-kb tandem duplication containing three genes. However, the gene that determines the Female phenotype, and its mechanism, remains unknown. Here, we created a set of mutants and revealed that ACS1G is responsible for gynoecy conferred by the F locus. The duplication resulted in ACS1G acquiring a new promoter and expression pattern; in plants carrying the F locus duplication, ACS1G is expressed early in floral bud development, where it functions with ACO2 to generate an ethylene burst. The resulting ethylene represses WIP1 and activates ACS2 to initiate gynoecy. This early ACS1G expression bypasses the need for ACS11 to produce ethylene, thereby establishing a dominant pathway for female floral development. Based on these findings, we propose a model for how these ethylene biosynthesis genes cooperate to control unisexual flower development in cucumber.

Unidirectional coupled chiral fiber grating.

We investigate a unidirectional coupled chiral fiber grating (UCFG) with both helical refractive index (RI) and loss modulation. The two modulations form a π/2 phase difference in the fiber cross-sectional azimuth angle, which "breaks" the mode coupled reciprocity of the forward and backward propagation. The forward propagation fundamental mode coupling is forbidden, while the backward propagation fundamental mode is coupled to the vortex mode. A simulation model based on the beam propagation method (BPM) is utilized to confirm the unidirectional coupling. Using the coupled mode analysis, we find that the key to the coupling difference lies in the non-Hermitian coupling matrix. In addition, the UCFG design involving mixed modulation is also discussed. The UCFG demonstrates its potential as a passive vortex beam generator, filter, and detector, with a transmittance difference of up to 30 dB between the coupled and uncoupled vortex modes.

Reuleaux triangle core fiber with triple rotational symmetry.

A Reuleaux triangle core fiber (RTF) with triple rotational symmetry is proposed and fabricated. Then the RTF is twisted to form the chiral fiber grating, which converts the core mode into a vortex mode containing 3rd-order orbital angular momentum (OAM). Based on the Fourier expansion of the core boundary, the straight-sided and arc-sided triangular core profiles were analyzed, revealing the mechanism of high-efficiency OAM3 generation. The experimental results show a 3rd-order vortex mode with a high conversion efficiency and purity, and the polarization-independent characteristics endowed by the core shape are also confirmed. The proposed RTF provides a new, to the best of our knowledge, way for higher-order vortex beam generation, which can be used in optical fiber communication systems with OAM multiplexing.

Afterglow Performance of Phenylenevinylene-Based Semiconducting Polymer Nanoparticles Doped with Photosensitizers Containing Electron-Withdrawing Groups.

It is usually believed that doping with photosensitizers capable of generating singlet oxygen (1O2) plays a pivotal role in enhancing the afterglow performance of semiconducting polymer nanoparticles (SPNs). However, the effect of doping photosensitizer bearing electron-withdrawing groups has not been reported. Here we report the effect of doping with six photosensitizers possessing different electron-withdrawing groups on the afterglow performance of SPNs using poly[(9,9-di(2-ethylhexyl)-9H-fluo-rene-2,7-vinylene)-co-(1-methoxy-4-(2-ethylhexyloxy)-2,5-phenylenevinylene)] (PF-MEHPPV) as substrate. It was found that the afterglow performance of SPNs was significantly influenced by doping with photosensitizers bearing electron-withdrawing groups. For the doped photosensitizers with strong electron-withdrawing groups, the stronger the electron-withdrawing ability of the group, the worse of the afterglow performance of the SPN regardless of the 1O2 generation ability of the photosensitizer. When the doped photosensitizer exhibited weak or none electron-withdrawing effect, the 1O2 generation ability of the photosensitizer played a dominant role on the afterglow performance of the SPNs. This work deepens the understanding of the design and synthesis of SPNs with different afterglow properties.

Establishment of orthotopic osteosarcoma animal models in immunocompetent rats through muti-rounds of in-vivo selection.

Immunodeficient murine models are usually used as the preclinical models of osteosarcoma. Such models do not effectively simulate the process of tumorigenesis and metastasis. Establishing a suitable animal model for understanding the mechanism of osteosarcoma and the clinical translation is indispensable. The UMR-106 cell suspension was injected into the marrow cavity of Balb/C nude mice. Tumor masses were harvested from nude mice and sectioned. The tumor fragments were transplanted into the marrow cavities of SD rats immunosuppressed with cyclosporine A. Through muti-rounds selection in SD rats, we constructed orthotopic osteosarcoma animal models using rats with intact immune systems. The primary tumor cells were cultured in-vitro to obtain the immune-tolerant cell line. VX2 tumor fragments were transplanted into the distal femur and parosteal radius of New Zealand white rabbit to construct orthotopic osteosarcoma animal models in rabbits. The rate of tumor formation in SD rats (P1 generation) was 30%. After four rounds of selection and six rounds of acclimatization in SD rats with intact immune systems, we obtained immune-tolerant cell lines and established the orthotopic osteosarcoma model of the distal femur in SD rats. Micro-CT images confirmed tumor-driven osteolysis and the bone destruction process. Moreover, the orthotopic model was also established in New Zealand white rabbits by implanting VX2 tumor fragments into rabbit radii and femurs. We constructed orthotopic osteosarcoma animal models in rats with intact immune systems through muti-rounds in-vivo selection and the rabbit osteosarcoma model.

Attributable mortality of acute kidney injury among critically ill patients with sepsis: a multicenter, retrospective cohort study.

BACKGROUND: Sepsis and acute kidney injury (AKI) are common severe diseases in the intensive care unit (ICU). This study aimed to estimate the attributable mortality of AKI among critically ill patients with sepsis and to assess whether AKI was an independent risk factor for 30-day mortality. METHODS: The information we used was derived from a multicenter prospective cohort study conducted in 18 Chinese ICUs, focusing on septic patients post ICU admission. The patients were categorized into two groups: those who developed AKI (AKI group) within seven days following a sepsis diagnosis and those who did not develop AKI (non-AKI group). Using propensity score matching (PSM), patients were matched 1:1 as AKI and non-AKI groups. We then calculated the mortality rate attributable to AKI in septic patients. Furthermore, a survival analysis was conducted comparing the matched AKI and non-AKI septic patients. The primary outcome of interest was the 30-day mortality rate following the diagnosis of sepsis. RESULTS: Out of the 2175 eligible septic patients, 61.7% developed AKI. After the application of PSM, a total of 784 septic patients who developed AKI were matched in a 1:1 ratio with 784 septic patients who did not develop AKI. The overall 30-day attributable mortality of AKI was 6.6% (95% CI 2.3 ∼ 10.9%, p = 0.002). A subgroup analysis revealed that the 30-day attributable mortality rates for stage 1, stage 2, and stage 3 AKI were 0.6% (95% CI -5.9 ∼ 7.2%, p = 0.846), 4.7% (95% CI -3.1 ∼ 12.4%, p = 0.221) and 16.8% (95% CI 8.1 ∼ 25.2%, p < 0.001), respectively. Particularly noteworthy was that stage 3 AKI emerged as an independent risk factor for 30-day mortality, possessing an adjusted hazard ratio of 1.80 (95% CI 1.31 ∼ 2.47, p < 0.001). CONCLUSIONS: The overall 30-day attributable mortality of AKI among critically ill patients with sepsis was 6.6%. Stage 3 AKI had the most significant contribution to 30-day mortality, while stage 1 and stage 2 AKI did not increase excess mortality.

Attributable mortality of ARDS among critically ill patients with sepsis: a multicenter, retrospective cohort study.

BACKGROUND: Both sepsis and acute respiratory distress syndrome (ARDS) are common severe diseases in the intensive care unit (ICU). There is no large-scale multicenter study to clarify the attributable mortality of ARDS among septic patients. This study aimed to evaluate the excess mortality of ARDS in critically ill patients with sepsis. METHODS: The data were obtained from a multicenter, prospective cohort study in 18 Chinese ICUs between January 2014 and August 2015. The study population was septic patients after ICU admission. The patients were categorized into two groups: those who developed ARDS (ARDS group) within seven days following a sepsis diagnosis and those who did not develop ARDS (non-ARDS group). Applying propensity score matching (PSM), patients were matched 1:1 as ARDS and non-ARDS groups. Mortality attributed to ARDS was calculated. Subsequently, we conducted a survival analysis to estimate the impact of ARDS on mortality. The primary endpoint was 30-day mortality after sepsis diagnosis. RESULTS: 2323 septic patients were eligible, 67.8% developed ARDS. After PSM, 737 patients with ARDS were matched 1:1 with 737 non-ARDS patients. ARDS's overall 30-day attributable mortality was 11.9% (95% CI 7.5-16.3%, p < 0.001). Subgroup analysis showed that the 30-day attributable mortality of mild, moderate, and severe ARDS was 10.5% (95% CI 4.0-16.8%, p < 0.001), 11.6% (95% CI 4.7-18.4%, p < 0.001) and 18.1% (95% CI 4.5-30.9%, p = 0.006), respectively. ARDS was an independent risk factor for 30-day mortality, with adjusted hazard ratios of 1.30 (95% CI 1.03-1.64, p = 0.027), 1.49 (95% CI 1.20-1.85, p < 0.001), and 1.95 (95% CI 1.51-2.52, p < 0.001) for mild, moderate, and severe ARDS, respectively. CONCLUSIONS: The overall 30-day attributable mortality of ARDS among critically ill patients with sepsis was 11.9%. Compared with mild and moderate ARDS, severe ARDS contributed more to death. ARDS was significantly associated with an increase in the 30-day mortality.

Microinvasion in hepatocellular carcinoma: predictive factor and application for definition of clinical target volume for radiotherapy.

BACKGROUND: To investigate the correlation between microinvasion and various features of hepatocellular carcinoma (HCC), and to clarify the microinvasion distance from visible HCC lesions to subclinical lesions, so as to provide clinical basis for the expandable boundary of clinical target volume (CTV) from gross tumor volume (GTV) in the radiotherapy of HCC. METHODS: HCC patients underwent hepatectomy of liver cancer in our hospital between July 2019 and November 2021 were enrolled. Data on various features and tumor microinvasion distance were collected. The distribution characteristics of microinvasion distance were analyzed to investigate its potential correlation with various features. Tumor size compared between radiographic and pathologic samples was analyzed to clarify the application of pathologic microinvasion to identify subclinical lesions of radiographic imaging. RESULTS: The average microinvasion distance was 0.6 mm, with 95% patients exhibiting microinvasion distance less than 3.0 mm, and the maximum microinvasion distance was 4.0 mm. A significant correlation was found between microinvasion and liver cirrhosis (P = 0.036), serum albumin level (P = 0.049). Multivariate logistic regression analysis revealed that HCC patients with cirrhosis had a significantly lower risk of microinvasion (OR = 0.09, 95%CI = 0.02 ~ 0.50, P = 0.006). Tumor size was overestimated by 1.6 mm (95%CI=-12.8 ~ 16.0 mm) on radiographic size compared to pathologic size, with a mean %Δsize of 2.96% (95%CI=-0.57%~6.50%). The %Δsize ranged from - 29.03% to 34.78%. CONCLUSIONS: CTV expanding by 5.4 mm from radiographic GTV could include all pathologic microinvasive lesions in the radiotherapy of HCC. Liver cirrhosis was correlated with microinvasion and were independent predictive factor of microinvasion in HCC.

Auxin guides germ-cell specification in Arabidopsis anthers.

Germ cells (GCs) are the key carriers delivering genetic information from one generation to the next. In a majority of animals, GCs segregate from somatic cells during embryogenesis by forming germlines. In land plants, GCs segregate from somatic cells during postembryonic development. In a majority of angiosperms, male GCs (archesporial cells) initiate at the four corners of the anther primordia. Little is known about the mechanism underlying this initiation. Here, we discovered that the dynamic auxin distribution in developing anthers coincided with GC initiation. A centripetal auxin gradient gradually formed toward the four corners where GCs will initiate. Local auxin biosynthesis was necessary for this patterning and for GC specification. The GC determinant protein SPOROCYTELESS/NOZZLE (SPL/NZZ) mediated the effect of auxin on GC specification and modified auxin biosynthesis to maintain a centripetal auxin distribution. Our work reveals that auxin is a key factor guiding GC specification in Arabidopsis anthers. Moreover, we demonstrate that the GC segregation from somatic cells is not a simple switch on/off event but rather a complicated process that involves a dynamic feedback circuit among local auxin biosynthesis, transcription of SPL/NZZ, and a progressive GC specification. This finding sheds light on the mystery of how zygote-derived somatic cells diverge into GCs in plants.

Limited value of platelet-related markers in diagnosing periprosthetic joint infection.

OBJECTIVE: To evaluate the diagnostic values of serum platelet count (PC), mean platelet volume ratio (MPV), platelet count to mean platelet volume ratio (PVR), platelet to lymphocyte ratio (PLR), platelet to neutrophil ratio (PNR), PC/Albumin-globulin ratio (PC/AGR), and PC/C-reactive protein (PC/ CRP) in the diagnosis of periprosthetic joint infection (PJI). METHODS: The medical records were retrospectively analyzed of the 158 patients who had undergone hip or knee revisions from January 2018 to May 2022. Of them, 79 cases were diagnosed with PJI and 79 with aseptic loosening (AL). PJI was defined using the Musculoskeletal Infection Society criteria. The plasma levels of CRP, the erythrocyte sedimentation rate (ESR), PC, MPV, PVR, PLR, PNR, PC/AGR, and PC/CRP in the 2 groups were recorded and analyzed. In addition, tests were performed according to different joint types. The receiver operating characteristic curve was used to calculate the sensitivity and specificity of each indicator. The diagnostic value for each indicator was calculated according to the area under the curve (AUC). RESULTS: The PC, PVR, PLR and PC/AGR levels in the PJI group were significantly higher than those in the AL group, while PC/CRP levels were significantly lower (P < 0.001). The AUC for PC/CRP, and PC/AGR was 0.804 and 0.802, respectively, which were slightly lower than that of CRP (0.826) and ESR (0.846). ROC analysis for PC/CRP, and PC/AGR revealed a cut-off value of 37.80 and 160.63, respectively, which provided a sensitivity of 73.42% and 84.81% and a specificity of 75.95% and 65.82% for PJI. The area under the curve of PLR and PC was 0.738 and 0.702. The area under the curve values for PVR, PNR, and MPV were 0.672, 0.553, and 0.544, respectively. CONCLUSIONS: The results of this study suggest that PC, PLR, PC/CRP, and PC/AGR values do not offer significant advantages over ESR or CRP values when employed for the diagnosis of PJI. PVR, PNR, and MPV were not reliable in the diagnosis of PJI.

Probe-Type Multi-Core Fiber Optic Sensor for Simultaneous Measurement of Seawater Salinity, Pressure, and Temperature.

In this article, we propose and demonstrate a probe-type multi-core fiber (MCF) sensor for the multi-parameter measurement of seawater. The sensor comprises an MCF and two capillary optical fibers (COFs) with distinct inner diameters, in which a 45° symmetric core reflection (SCR) structure and a step-like inner diameter capillary (SIDC) structure filled with polydimethylsiloxane (PDMS) are fabricated at the fiber end. The sensor is equipped with three channels for different measurements. The surface plasmon resonance (SPR) channel (CHSPR) based on the side-polished MCF is utilized for salinity measurement. The fiber end air cavity, forming the Fabry-Pérot interference (FPI) channel (CHFPI), is utilized for pressure and temperature measurement. Additionally, the fiber Bragg grating (FBG) channel (CHFBG), which is inscribed in the central core, serves as temperature compensation for the measurement results. By combining three sensing principles with space division multiplexing (SDM) technology, the sensor overcomes the common challenges faced by multi-parameter sensors, such as channel crosstalk and signal demodulation difficulties. The experimental results indicate that the sensor has sensitivities of 0.36 nm/‱, -10.62 nm/MPa, and -0.19 nm/°C for salinity, pressure, and temperature, respectively. As a highly integrated and easily demodulated probe-type optical fiber sensor, it can serve as a valuable reference for the development of multi-parameter fiber optic sensors.

Gibberellin promotes cambium reestablishment during secondary vascular tissue regeneration after girdling in an auxin-dependent manner in Populus.

Secondary vascular tissue (SVT) development and regeneration are regulated by phytohormones. In this study, we used an in vitro SVT regeneration system to demonstrate that gibberellin (GA) treatment significantly promotes auxin-induced cambium reestablishment. Altering GA content by overexpressing or knocking down ent-kaurene synthase (KS) affected secondary growth and SVT regeneration in poplar. The poplar DELLA gene GIBBERELLIC ACID INSENSITIVE (PtoGAI) is expressed in a specific pattern during secondary growth and cambium regeneration after girdling. Overexpression of PtoGAI disrupted poplar growth and inhibited cambium regeneration, and the inhibition of cambium regeneration could be partially restored by GA application. Further analysis of the PtaDR5:GUS transgenic plants, the localization of PIN-FORMED 1 (PIN1) and the expression of auxin-related genes found that an additional GA treatment could enhance the auxin response as well as the expression of PIN1, which mediates auxin transport during SVT regeneration. Taken together, these findings suggest that GA promotes cambium regeneration by stimulating auxin signal transduction.

The screening, identification, design and clinical application of tumor-specific neoantigens for TCR-T cells.

Recent advances in neoantigen research have accelerated the development of tumor immunotherapies, including adoptive cell therapies (ACTs), cancer vaccines and antibody-based therapies, particularly for solid tumors. With the development of next-generation sequencing and bioinformatics technology, the rapid identification and prediction of tumor-specific antigens (TSAs) has become possible. Compared with tumor-associated antigens (TAAs), highly immunogenic TSAs provide new targets for personalized tumor immunotherapy and can be used as prospective indicators for predicting tumor patient survival, prognosis, and immune checkpoint blockade response. Here, the identification and characterization of neoantigens and the clinical application of neoantigen-based TCR-T immunotherapy strategies are summarized, and the current status, inherent challenges, and clinical translational potential of these strategies are discussed.

Rice Cell Division Cycle 20s are required for faithful chromosome segregation and cytokinesis during meiosis.

Chromosome segregation must be under strict regulation to maintain chromosome euploidy and stability. Cell Division Cycle 20 (CDC20) is an essential cell cycle regulator that promotes the metaphase-to-anaphase transition and functions in the spindle assembly checkpoint, a surveillance pathway that ensures the fidelity of chromosome segregation. Plant CDC20 genes are present in multiple copies, and whether CDC20s have the same functions in plants as in yeast and animals is unclear, given the potential for divergence or redundancy among the multiple copies. Here, we studied all three CDC20 genes in rice (Oryza sativa) and constructed two triple mutants by clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated protein 9-mediated genome editing to explore their roles in development. Knocking out all three CDC20 genes led to total sterility but did not affect vegetative development. Loss of the three CDC20 proteins did not alter mitotic division but severely disrupted meiosis as a result of asynchronous and unequal chromosome segregation, chromosome lagging, and premature separation of chromatids. Immunofluorescence of tubulin revealed malformed meiotic spindles in microsporocytes of the triple mutants. Furthermore, cytokinesis of meiosis I was absent or abnormal, and cytokinesis II was completely prevented in all mutant microsporocytes; thus, no tetrads or pollen formed in either cdc20 triple mutant. Finally, the subcellular structures and functions of the tapetum were disturbed by the lack of CDC20 proteins. These findings demonstrate that the three rice CDC20s play redundant roles but are indispensable for faithful meiotic chromosome segregation and cytokinesis, which are required for the production of fertile microspores.

High-order mixed vortex beam generator.

A mixed multi-order vortex beam generator, based on a Reuleaux triangle core fiber chiral grating (RCFG), is proposed. The triangular perturbation and off-axis effects induced by core shape, result in the simultaneous coupling of the core mode with the 1st- and 3rd-order vortex modes. To the best of our knowledge, this is the first time that a mixed vortex beam was generated in a single chiral fiber. The phase matching conditions required for the co-coupling of multi-order vortex beams are analyzed based on the coupled mode theory. Additionally, a cladding shrinkage method is proposed to flexibly adjust the co-coupling wavelength. We found that the key to co-coupling lies in balancing the different order perturbations of the Reuleaux triangle core fiber (RTF). The proposed method offers a new approach for the design of mixed multi-order vortex beam generators, with potential applications in fields such as fiber OAM communications, optical tweezers, and super-resolution imaging.

Solid-State Luminescent Materials with Multiple Emission Colors and Near-Unity Quantum Yield.

Developing solid luminescent materials with a unity quantum yield and tunable emission color is promising, although it is still a difficult task. A straightforward heat-treatment method has been developed to load 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) into the matrix of boric acid (BA) to produce powders with a near-unity quantum yield and tunable emission color from yellow to green. Our results suggest that the emission of the powders originates from PTCDA, and the tunability of the emission color is caused by the hydrolysis of PTCDA in the alkaline environment. The near-unity quantum yield is attributed to the BA matrix, which confines PTCDA. In addition, the powder also shows excellent thermal stability that allows its application in light-emitting diodes. The above results are important for the development of solid-state luminescent materials for various applications, and also provide a clue for studying the emission properties of luminescent materials.

Band Structure Engineering of Single Pt Atoms on Fe-TiO2 for Enhanced Photocatalytic Performance.

Single atomic site catalysts display the maximal atom-utilization efficiency, unique structural properties, and remarkable enhancements on catalytic activity. Herein, single Pt atoms loaded Fe-TiO2 catalysts were prepared. Fe3+ doping leads to the formation of oxygen vacancies and improve the interaction between TiO2 and Pt. Single Pt atoms are thus anchored and effectively modify the local energy band structure of TiO2 . The optimized local band structures improve the intrinsic photoexcitation of Pt/Fe-TiO2 , promote the separation of photogenerated carriers, and extend the lifetime of photogenerated carriers. Meanwhile, the electrons transfer from the excited dyes to the conduction band edge of Pt/Fe-TiO2 is also facilitated due to the shift-down of the conduction band edge. Therefore, with the increase of the Pt content (till up to 0.6 wt%), the photocatalytic performance of Pt/ Fe-TiO2 with the confined single Pt atoms is significantly boosted in either the intrinsic or the sensitized photocatalytic process.

Facet-Dependent Charge Density of Serpentine: Nanoscopic Implications for Aggregation and Entrainment of Fine Particles.

Deciphering the facet-dependent surface properties of clay minerals holds vital significance in both fundamental research and practical engineering applications. To date, the anisotropic local charge density of serpentine surfaces still remains elusive, and thus, the interaction energies and associated aggregate structures between different crystal planes of serpentine cannot be quantitatively determined. In this work, different crystal planes of serpentine (i.e., SiO basal, MgOH basal, and edge) were selectively exposed, and their surface potentials and charge densities were determined using atomic force microscopy (AFM) force measurements coupled with Derjaguin-Landau-Verwey-Overbeek (DLVO) theory fitting. The SiO and edge planes consistently exhibited a permanently negative surface charge, whereas the point of zero charge (PZC) on the MgOH plane was estimated to be pH 9.0-11.0. Based on the interaction energy calculation between different serpentine planes, the aggregation structures of serpentine were predicted. Combined with scanning electron microscopy observation of freeze-dried samples, SiO-MgOH and MgOH-edge associations were found to dominate the aggregate structures at pH ≤ 9.0, thereby resulting in a stacking or "card-houses" structures. In contrast, all of the plane associations exhibited the repulsive interaction energy at pH 11.0, which led to a completely dispersed system, ultimately causing the most severe fine particle entrainment during froth flotation. Our work provides quantitative clarification of facet-dependent surface properties and aggregate structures of serpentine under different pH conditions, which will help improve the fundamental understanding of colloidal behaviors of clay minerals.

Trop2 Promotes Vimentin Expression and Induces Epithelial Stromal Transformation, Invasion and Metastasis of Gastric Cancer Cells by Regulating ß-Catenin.

One of the most critical biological characteristics of gastric cancer (GC) is invasion and metastasis, which is also the main factor of recurrence and drug resistance. Epithelial intermediate transformation is a biological process. Epithelial cells lose the ability to exercise their epithelial characteristics while acquiring parental characteristics. Malignant epithelial cancer cells lose their connectivity and polarity through the EMT process, change cell morphology and enhance their migration ability, so as to gain the ability of invasion and variation. In this paper, we proposed that trop2 can promote vimentin expression by regulating ß - Catenin to induce the transformation and metastasis of gastric cancer cells. In this study, a control group experiment was set up to construct mkn45tr and nci-n87tr resistant cell lines. The results showed that the resistance index (RI) of mkn45tr was 31.33, P < 0.01; the resistance index (RI) of nci-n87tr was 108.23, P < 0.01. The results show that the drug resistance of gastric cancer cells will become stronger with the change of time.