Goserelin Acetate Loaded Poloxamer Hydrogel in PLGA Microspheres: Core-Shell Di-Depot Intramuscular Sustained Release Delivery System.

This study aimed to prepare and optimize goserelin acetate (GOS) loaded hydrogel poly(d,l-lactic acid-co-glycolic acid) (PLGA) microsphere that is suitable for long-acting clinical treatment, investigate its structure, and regulate the initial release manner. Here, the PLGA microsphere containing Poloxamer hydrogel loaded with ∼15% (w/w) GOS was prepared by double-emulsion-solvent evaporation method and evaluated in terms of microscopic structure, physicochemical properties, and release manner in vitro and in vivo. Raman volume imaging and scanning electron microscopy studies revealed a core-shell Di-Depot structure of the microsphere, in which multi-GOS-loaded hydrogel depots were distributed in the core region. Under the interaction of hydrogel and PLGA depots, high encapsulation efficiency (94.16%) and low burst release (less than 2%) were achieved, along with the accompanying prolonged administration interval (49 days); an enhanced relative bioavailability 9.36-fold higher than that of Zoladex implant was also observed. Also, by addition of 1-5% acetic acid, the lag time was shortened to 6 days. The strategy for regulating the initial release provides new insights for manipulating the release behavior of the PLGA microspheres. The desirable property of the Poloxamer hydrogel PLGA microsphere indicated its promising application in controlled release drug delivery system.

Entrapping of Nanoparticles in Yeast Cell Wall Microparticles for Macrophage-Targeted Oral Delivery of Cabazitaxel.

In this work, a nano-in-micro carrier was constructed by loading polymer-lipid hybrid nanoparticles (NPs) into porous and hollow yeast cell wall microparticles (YPs) for macrophage-targeted oral delivery of cabazitaxel (CTX). The YPs, primarily composed of natural ß-1,3-d-glucan, can be recognized by the apical membrane receptor, dectin-1, which has a high expression on macrophages and intestinal M cells. By combining electrostatic force-driven self-deposition with solvent hydration/lyophilization methods, the positively charged NPs loaded with CTX or fluorescence probes were efficiently packaged into YPs, as verified by scanning electron microscope (SEM), atomic force mircoscope (AFM), and confocal laser scanning microscopy (CLSM) images. NP-loaded YPs (NYPs) showed a slower in vitro drug release and higher drug stability compared with NPs in a simulated gastrointestinal environment. Biodistribution experiments confirmed a widespread distribution and extended retention time of NYPs in the intestinal tract after oral administration. Importantly, a large amount of NYPs were primarily accumulated and transported in the intestinal Peyer's patches as visualized in distribution and absorption site studies, implying that NYPs were mainly absorbed through the lymphatic pathway. In vitro cell evaluation further demonstrated that NYPs were rapidly and efficiently taken up by macrophages via receptor dectin-1-mediated endocytosis using a mouse macrophage RAW 264.7 cell line. As expected, in the study of in vivo pharmacokinetics, the oral bioavailability of CTX was improved to 32.1% when loaded in NYPs, which is approximately 5.7 times higher than that of the CTX solution, indicating the NYPs are efficient for oral targeted delivery. Hence, this nano-in-micro carrier is believed to become a hopeful alternative strategy for increasing the oral absorption of small molecule drugs.

Rational design of antibiotic-free antimicrobial contact lenses: Trade-offs between antimicrobial performance and biocompatibility.

Microbial keratitis associated with contact lenses (CLs) wear remains a significant clinical concern. Antibiotic therapy is the current standard of care. However, the emergence of multidrug-resistant pathogens necessitates the investigation of alternative strategies. Antibiotic-free antimicrobial contact lenses (AFAMCLs) represent a promising approach in this regard. The effectiveness of CLs constructed with a variety of antibiotic-free antimicrobial strategies against microorganisms has been demonstrated. However, the impact of these antimicrobial strategies on CLs biocompatibility remains unclear. In the design and development of AFAMCLs, striking a balance between robust antimicrobial performance and optimal biocompatibility, including safety and wearing comfort, is a key issue. This review provides a comprehensive overview of recent advancements in AFAMCLs technology. The focus is on the antimicrobial efficacy and safety of various strategies employed in AFAMCLs construction. Furthermore, this review investigates the potential impact of these strategies on CLs parameters related to wearer comfort. This review aims to contribute to the continuous improvement of AFAMCLs and provide a reference for the trade-off between resistance to microorganisms and wearing comfort. In addition, it is hoped that this review can also provide a reference for the antimicrobial design of other medical devices.

Antibacterial Activity and Mechanism of Action of Osthole against Listeria monocytogenes.

The purpose of this study was to investigate the antibacterial activity and mechanism of action of osthole against Listeria monocytogenes. The antibacterial activity of osthole was evaluated by determining the minimum inhibitory concentration (MIC) and growth curve. Cell morphology, membrane permeability, membrane integrity, bacterial physiology, and metabolism were explored using different methods to elucidate the mechanism of action of osthole. It was shown that the MIC of osthole against L. monocytogenes was 62.5 µg/mL and it inhibited the growth of L. monocytogenes effectively in a concentration-dependent manner. Scanning electron microscopy (SEM) images demonstrated morphology changes of L. monocytogenes, including rough surface, cell shrinkage, and rupture. It was found that extracellular conductivity and macromolecule content were increased significantly in the presence of osthole, indicating the disruption of cell membrane integrity and permeability. Laser confocal microscopy results supported the conclusion that osthole caused severe damage to the cell membrane. It was also noticed that osthole depleted intracellular adenosine triphosphate (ATP), inhibited Na+-K+-ATPase and Ca2+-Mg2+-ATPase activity, and promoted the accumulation of intracellular reactive oxygen species (ROS), leading to cell death. This study suggests that osthole is a promising antibacterial agent candidate against L. monocytogenes, and it shows potential in the prevention and control of foodborne pathogens.

Crystallization inhibitory effects of konjac glucomannan, sodium alginate and xanthan gum on curcumin in supersaturated solution.

Supersaturating drug delivery system (SDDS) is a promising approach to enhance the solubility of hydrophobic functional components. However, SDDS is thermodynamically unstable and crystallization tends to occur. In this work, curcumin was used as a model compound, and the crystallization inhibitory effect of konjac glucomannan (KGM), sodium alginate (SA) and xanthan gum (XTG) on curcumin in supersaturated solution was investigated. Amorphous solubility of curcumin was determined using ultraviolet extinction, fluorescence spectroscopy and dynamic light scattering methods. Nucleation induction time (NIT) and crystal growth rate of curcumin were evaluated using ultraviolet probe in the absence and presence of various natural polysaccharides (NPs). Results showed that amorphous solubility of curcumin was approximately 30 µg/mL in pH 6.8 phosphate buffer. NPs used in this work restrained nucleation or crystal growth of curcumin effectively. The NITs of curcumin in the absence of NPs and in the presence of XTG, KGM and SA (1 µg/mL) were 3.7, 60.7, 20.0 and 8.0 min, respectively. The crystal growth rate of curcumin in the absence of NPs and in the presence of XTG, SA and KGM (1 µg/mL) were 0.0103, 0.00752, 0.00286 and 0.000306 min-1, respectively. The nucleation inhibitory effect of NPs on curcumin was ranked as XTG > KGM > SA. The order of crystal growth inhibition capacity of NPs was KGM > SA > XTG. In conclusion, NPs could be incorporated into SDDS to maintain supersaturation of hydrophobic components for enhanced bioavailability.

A disulfiram/copper gluconate co-loaded bi-layered long-term drug delivery system for intraperitoneal treatment of peritoneal carcinomatosis.

To develop a long-term drug delivery system for the treatment of primary and metastatic peritoneal carcinoma (PC) by intraperitoneal (IP) injection, a disulfiram (DSF)/copper gluconate (Cu-Glu)-co-loaded bi-layered poly (lactic acid-coglycolic acid) (PLGA) microspheres (Ms) - thermosensitive hydrogel system (DSF-Ms-Cu-Glu-Gel) was established. Rate and mechanisms of drug release from DSF-Ms-Cu-Glu-Gel were explored. The anti-tumor effects of DSF-Ms-Cu-Glu-Gel by IP injection were evaluated using H22 xenograft tumor model mice. The accumulative release of DSF from Ms on the 10th day was 83.79% without burst release. When Ms were dispersed into B-Gel, burst release at 24 h decreased to 14.63%. The results showed that bis (diethyldithiocarbamate)-copper (Cu(DDC)2) was formed in DSF-Ms-Cu-Glu-Gel and slowly released from B-Gel. In a pharmacodynamic study, the mount of tumor nodes and ascitic fluid decreased in the DSF-Ms-Cu-Glu-Gel group. This was because: (1) DSF-Ms-Cu-Glu-Gel system co-loaded DSF and Cu-Glu, and physically isolated DSF and Cu-Glu before injection to protect DSF; (2) space and water were provided for the formation of Cu(DDC)2; (3) could provide an effective drug concentration in the abdominal cavity for a long time; (4) both DSF and Cu(DDC)2 were effective anti-tumor drugs, and the formation of Cu(DDC)2 occurred in the abdominal cavity, which further enhanced the anti-tumor activity. Thus, the DSF-Ms-Cu-Glu-Gel system can be potentially used for the IP treatment of PC in the future.

Improved dissolution rate and bioavailability of fenofibrate pellets prepared by wet-milled-drug layering.

OBJECTIVE: The objective of this study is to investigate the wet-milled-drug layering process which could significantly improve the dissolution rate and oral bioavailability of fenofibrate pellets. METHODS: Fenofibrate was milled with HPMC-E5 to prepare a uniform suspension in the micrometer and nanometer range, and this suspension was then layered on to sugar spheres to form the pellets (F1, F2). RESULTS: The particle size was significantly reduced (from 1000 µm to 1-10 µm and 400 nm) but the fenofibrate in suspension retained its crystallinity from the results of DSC and PXRD investigations. The dissolution rate of F1-F2 and Antara® capsules was 55.47 %, 61.27 % and 58.43 %, respectively, in 0.01 mol/L SDS solution over 60 min. In addition, F1, F2, and Antara® capsules were given orally to 6 beagle dogs to determine the bioavailability. The C(max) of F1, F2 (8.21 ± 2.55 and 9.33 ± 2.37 µg/mL)and the AUC((0-t)) of F1, F2 (152.46 ± 78.89 and 172.17 ± 67.58 µg/mL·h)were higher than those of Antara® (6.02 ± 3.34 µg/mL and 89.82 ± 46.46 µg/mL·h) and, F1, F2 reached their C(max) earlier than Antara® (F1: 2.0 ± 1.1 h; F2: 1.8 ± 1.2 h; Antara®: 6.0 ± 8.9 h). CONCLUSION: These results show that the wet-milled-drug layering technique is a powerful method to improve the dissolution rate and the bioavailability of fenofibrate.

Hydrochlorothiazide/Losartan Potassium Tablet Prepared by Direct Compression.

Hydrochlorothiazide (HCTZ)/losartan potassium (LOS-K) was used as a model drug to prepare compound tablets through the investigation of the compression and mechanical properties of mixed powders to determine the formulation and preparation factors, followed by D-optimal mixture experimental design to optimize the final parameters. The type and amount of lactose monohydrate (SuperTab®14SD, 19.53−26.91%), microcrystalline cellulose (MCC PH102, 32.86−43.31%), pre-gelatinized starch (Starch-1500, 10.96−15.91%), and magnesium stearate (0.7%) were determined according to the compressive work, stress relaxation curves, and Py value. Then, the compression mechanism of the mixed powder was investigated by the Kawakita equation, Shapiro equation, and Heckel analysis, and the mixed powder was classified as a Class-II powder. The compaction pressure (150−300 MPa) and tableting speed (1200−2400 Tab/h) were recommended. A D-optimal mixture experimental design was utilized to select the optimal formulation (No 1, 26.027% lactose monohydrate, 32.811% MCC PH102, and 15.462% pregelatinized starch) according to the drug dissolution rate, using Hyzaar® tablets as a control. Following oral administration in beagle dogs, there were no significant differences in bioavailability between the No. 1 tablet and the Hyzaar® tablet in HCTZ, losartan carboxylic acid (E-3174), and LOS-K (F < F0.05). Thus, formulation and preparation factors were determined according to the combination of the compression and mechanical properties of the mixed powder and quality of tablets, which was demonstrated to be a feasible method in direct powder compression.

Goserelin/PLGA solid dispersion used to prepare long-acting microspheres with reduced initial release and reduced fluctuation of drug serum concentration in vivo.

To prepare Goserelin (GOS) loaded long-acting microspheres with reduced initial release and prolonged drug release time of GOS, GOS/PLGA solid dispersion (by hot-melt extrusion, HME) was dissolved/dispersed in dichloromethane (DCM) to prepare microspheres by O/W method. From results of molecular dynamics simulation, PLGA and GOS molecules completely and uniformly dissolved and dispersed in DCM, respectively. In F5 microspheres (prepared by HME-O/W method), GOS existed as molecular or amorphous state, but not aggregation. Burst release of F5 microspheres (2.75%) was similar with Zoladex™ implant (0.39%) and less than F10 microspheres (prepared by S/O/W method, 25.92%). After lag phase, GOS released rapidly from F5 microspheres and the cumulative release on the 45th days was 95.14%. After injection of F5 microspheres, GOS serum concentration was relative steady at the range of 27.64-175.27 ng/mL for nearly 35 days. AUC(0-35 day) of F5 microspheres was almost 2 times that of F10 microspheres. Pharmacodynamics study also showed potential effect of F5 microspheres on inhibiting the secretion of testosterone in male rats. HME-O/W method is potential to establish long-acting PLGA microspheres (loading water-soluble drug), exhibiting stable drug serum concentration in vivo, and without large concentration fluctuation or serious pain/side effects.

Tumor Microenvironment-Responsive Shell/Core Composite Nanoparticles for Enhanced Stability and Antitumor Efficiency Based on a pH-Triggered Charge-Reversal Mechanism.

High systemic stability and effective tumor accumulation of chemotherapeutic agents are indispensable elements that determine their antitumor efficacy. PEGylation of nanoparticles (NPs) could prolong the retention time in vivo by improving their stability in circulation, but treatment suffers reduced tumor penetration and cellular uptake of nanomedicines. The tumor microenvironment (TME)-responsive NPs maintain their stealth features during circulation and undergo a stimuli-responsive dePEGylation once exposed to the site of action, thereby achieving enhanced internalization in tumor cells. Herein, TME-responsive shell/core composite nanoparticles were prepared and optimized with enhanced stability and tumor intake efficiency. We synthesized 12-hydroxystearic acid-poly (ethylene glycol)-YGRKKRRQRRR (HA-PEG-TAT) as a post-insert apparatus in disulfiram (DSF)-encapsulated naked nanoparticles (N-NPs) in order to form a cationic core (TAT-NPs). Accordingly, the negatively charged poly (glutamate acid)-graft-poly (ethylene glycol) (PGlu-PEG) was further applied to the surface of TAT-NPs as a negative charged shell (PGlu-PEG/TAT-NPs) via the electrostatic interaction between glutamic acids and arginine at the outer ring of the TAT-NPs. PGlu-PEG/TAT-NPs displayed a huge loading capability for DSF with reduced degradation in plasma and exhibited rapid charge reversal when pH decreased from 7.4 to pH 6.5, demonstrating an excellent systemic stability as well as intelligent stimuli-responsive performance within the acidic TME. Furthermore, the in vivo antitumor study revealed that PGlu-PEG/TAT-NPs provided greater antitumor efficacy compared with free DSF and N-NPs with no obvious systemic toxicity. In conclusion, the TME-responsive shell/core composite NPs, consisting of PGlu-PEG and HS-PEG-TAT, could mediate an effective and biocompatible delivery of chemotherapeutic agents with clinical potential.

Augmented Renal Clearance: What Have We Known and What Will We Do?

Augmented renal clearance (ARC) is a phenomenon of increased renal function in patients with risk factors. Sub-therapeutic drug concentrations and antibacterial exposure in ARC patients are the main reasons for clinical treatment failure. Decades of increased research have focused on these phenomena, but there are still some existing disputes and unresolved issues. This article reviews information on some important aspects of what we have known and provides suggestion on what we will do regarding ARC. In this article, we review the current research progress and its limitations, including clinical identification, special patients, risk factors, metabolism, animal models and clinical treatments, and provide some promising directions for further research in this area.

Pharmaceutical strategies in improving anti-tumour efficacy and safety of intraperitoneal therapy for peritoneal metastasis.

Introduction: In selected patients with limited peritoneal metastasis (PM), favorable tumor biology, and a good clinical condition, there is an indication for combination of cytoreductive surgery (CRS) and subsequent intravenous (IV) or intraperitoneal (IP) chemotherapy. Compared with IV injection, IP therapy can achieve a high drug concentration within the peritoneal cavity with low systemic toxicity, however, the clinical application of IP chemotherapy is limited by the related abdominal pain, infection, and intolerance.Areas covered:To improve the anti-tumor efficacy and safety of IP therapy, various pharmaceutical strategies have been developed and show promising potential. This review discusses the specialized modification of traditional drug delivery systems and demonstrates the preparation of customized drug carriers for IP therapy, including chemotherapy and gene therapy. IP therapy has important clinical significance in the treatment of PM using novel anti-tumor agents as well as conventional drugs in new applications.Expert opinion: Although IP therapy exhibits good performance both in mouse models and in patients with PM in clinical trials, its clinical application remains limited due to the serious side effects and low acceptability. Further investigations, including pharmaceutical strategies, are needed to develop potential IP therapy, focusing on the efficacy and safety thereof.

Lactoferrin for the treatment of COVID-19 (Review).

The coronavirus disease 2019 (COVID-19) outbreak was caused by infection with the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The clinical outcomes of elderly individuals and those with underlying diseases affected by COVID-19 are serious, and may result in acute respiratory distress syndrome (ARDS) and even mortality. Currently, the clinical treatments for COVID-19 mostly involve symptom alleviation measures and non-specific broad spectrum antiviral drugs, as highly effective antiviral drugs and vaccines are not yet available. Lactoferrin (LF) is a safe iron-binding glycoprotein that is present in the milk of the majority of mammals and exhibits broad-spectrum antiviral activity, including against coronaviruses. In addition, LF also exhibits anti-inflammatory, anti-infective and immune-regulating properties, which are in line with the treatment requirements for SARS-CoV-2 infection. Therefore, the use of LF may be of value in the prevention and/or management of COVID-19. The aim of the present review was to summarize the previous reports on the antiviral properties of LF and compare these with the characteristics of SARS-CoV-2 infection, in order to determine whether LF could be used to assist in the prevention of COVID-19 and to investigate the possible underlying mechanisms governing its mode of action.

The effect of polymer blends on initial release regulation and in vitro-in vivo relationship of peptides loaded PLGA-Hydrogel Microspheres.

The aim of this study was to resolve the lag time problem for peptides loaded PLGA-Hydrogel Microspheres (PLGA-gel-Ms) by blending low molecular PLGA (Mw. 1 kDa) into PLGA (Mw. 10 kDa) as an intrinsic porogen, and then assess the in vitro-in vivo relationship (IVIVR). Here, Goserelin acetate (GOS) was chosen as the model peptides. When compared to additional types of porogen, the intrinsic porogen avoided impurities remaining and protected the bioactivities of the peptides. By adding 10% PLGA (Mw. 1 kDa), the lag time was eliminated both in vitro and in vivo with a desirable EE (97.04% ± 0.51%). The release mechanisms were found to be: a) initial GOS release mainly controlled by pores diffusion and b) autocatalysis of PLGA (Mw. 1 kDa) which increased the quantity of aqueous pores, as revealed by SEM images. To solve the challenges caused by multiphasic release profiles, for the first time the Segmented phases IVIVR were proposed and developed, and showed improved linear fitting effects and supported the proposed release mechanisms. The application of PLGA blends could provide a new insight into PLGA microsphere initial release rate regulation.

Ginkgolides-loaded soybean phospholipid-stabilized nanosuspension with improved storage stability and in vivo bioavailability.

The purpose of this study was to investigate the effects of soybean phospholipid, as a steric stabilizer, on improving dissolution rate, storage stability and bioavailability of ginkgolides. The ginkgolides coarse powder, hydroxypropyl methylcellulose (HPMC), soybean phospholipid and sodium dodecyl sulfate (SDS) were mixed and wet-milled to prepare nanosuspension S1. Nanosuspension S2 was obtained by the same technique except adding the soybean phospholipid. Results of particle size showed that particle size (D50) of S1 significantly decreased from 44.25 µm to 0.373 µm. Results of differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and transmission electron microscope (TEM) showed that ginkgolides in nanosuspension still maintained its crystallinity, and the nanoparticles were all nearly circular and uniformly dispersed. Then, pellets F1 and F2 were prepared by layering S1 and S2 onto the microcrystalline cellulose (MCC) spheres, respectively. The dissolution rate of ginkgolide A (GA) and ginkgolide B (GB) in F1 was 98.3% and 97.7% in 30 min, respectively. It was much higher than F2 (89.0% and 86.5%) and coarse powder of ginkgolides (22.3% and 24.6%). According to the results of stability test, the storage stability of F1 was improved compared with F2. In addition, compared with coarse powder of ginkgolides, the relative bioavailability of GA and GB in F1 were up to (221.84 ±â€¯106.67) % and (437.45 ±â€¯336.43) %, respectively. The above results demonstrated that soybean phospholipid added to the nanosuspension played an important role in improving drug dissolution rate, storage stability and in vivo bioavailability: (1) The amphiphilic soybean phospholipid interacted with the drug, with the hydrophobic part adsorbed on the surface of the poorly soluble drug and the hydrophilic part exposed to the aqueous medium. This increases the wettability of the nanoparticles, which ensure a good redispersibility of the drug particles. (2) It could self-assemble to form an interfacial phospholipid film by surrounding the individual nanoparticles, which can produce enough steric hindrance to prevent nanoparticles from aggregation and ensure a rapid dissolution rate. (3) Soybean phospholipid and its hydrolysate formed strong micellar solubilizing vehicles with bile salts in vivo, stimulated the absorption process of ginkgolides. Thus, soybean phospholipid was a promising steric stabilizer in nanosuspension drug delivery system.

Effects of the multilayer structures on Exenatide release and bioactivity in microsphere/thermosensitive hydrogel system.

Traditional polypeptide-loaded PLGA microspheres (PM) using emulsion electrospray techniques often exhibit unsteady release and limited bioactivity. To solve these two problems, an Exenatide (EXT)-loaded multilayer system composed ofPM and thermosensitive hydrogel was prepared by the emulsion electrospray technique in this study. Hydrogel mixture were loaded in PLGA microspheres as Depot-hydrogel to prepare Gel/PM. The PM/Gel and Gel/PM/Gel systems were obtained by dispersion of PM and Gel/PM into hydrogel mixture, respectively. EXT in Gel/PM/Gel showed a constantly in vitro release for 30 days, which was significantly enhanced in comparison of those in the PM/Gel and the Gel/PM. PM/Gel and Gel/PM/Gel showed diminished burst release and no platform period compared with PM and Gel/PM. And these could be because the introduced Matrix-hydrogel outside, as a buffer layer, inhibited burst releases and exhibited a sustained manner. The inner Depot-hydrogelstructure slowed the PLGA degradation rate and drug release rate. As well, more than 15-day blood glucose levels in KKAy mice were greatly maintained at 7.50-9.50 mmol/L after a single subcutaneous injection of Gel/PM/Gel (4.95 µg/kg). Spatial stability and further bioactivity of released EXT were well protected by EXT-hydrogel complexes, and undesirable uptake of EXT and microspheres via phagocytes were also decreased by PEG shell. Thus, the long-acting microspheres/hydrogel multilayer system prepared by emulsion electrospray technique showed promising potentials for loading hydrophilic polypeptides and proteins.

Exenatide-loaded microsphere/thermosensitive hydrogel long-acting delivery system with high drug bioactivity.

A series of mixed hydrogels of PLGA-PEG-PLGA and PCLA-PEG-PCLA were synthesized, and investigated in terms of their critical micelle concentration, stability and thermosensitive properties. Also, some mixed hydrogel was selected to prepare Depot-gel-in-Ms-in-Matrix-gel system for the treatment of type 2 diabetes mellitus. Briefly, Exenatide (EXT) loaded hydrogels was encapsulated in PLGA microspheres (Ms) and further encapsulated into blank hydrogel. The mechanism of Exenatide release involved drug diffusion, hydrogel diffusion, PLGA erosion and mixed hydrogel erosion. The results showed that EXT release in vitro was at a sustained rate for 46days, because it is controlled by the inner-deport-gel, the Ms matrix and the outer-Matrix-gel successively. No burst release or platform was observed due to the interception function and control function of the outer-Matrix-gel. The biological activity of EXT was protected, because the hydrophilic EXT molecules tend to distribute in the hydrophilic domain of the mixed hydrogel. In vivo, a single injection of Depot-gel-in-Ms-in-Matrix-gel allowed mice to maintain a stable blood glucose concentration and well-controlled body weight for 20days. In addition, results of oral glucose tolerance test and Hematoxylin-Eosin staining demonstrated that triple-barrier Depot-gel-in-Ms-in-Matrix-gel was a promising hydrophilic protein/polypeptide-loaded long-acting system with high drug bioactivity.

Hot-melt sub- and outercoating combined with enteric aqueous coating to improve the stability of aspirin tablets.

Aspirin is apt to hydrolyze. In order to improve its stability, a new method has been developed involving the application of hot-melt sub- and outercoating combined with enteric aqueous coating. The main aim was to investigate the influence of these factors on the stability of ASA and understand how they work. Satisfactory storage stability were obtained when the aspirin tablet core coated with Eudragit L30D55 film was combined with glycerin monostearate (GMS) as an outercoat. Hygroscopicity testing indicated that the moisture penetrating into the tablet may result in a significant change in the physical properties of the coating film observed by scanning electron microscopy. Investigation of the compatibility between the drug and film excipients shows that the talc and methacrylic acid had a significant catalytic effect on ASA. A hypothesis was proposed that the hydrolysis of ASA enteric coated tablets (ASA-ECT) was mostly concentrated in the internal film and the interfaces between the film and tablet core. In conclusion, hot-melt coating technology is an alternative to subcoating or outercoating. Also, GMS sub-coating was a better choice for forming a stable barrier between the tablet core and the polymer coating layer, and increases the structure and chemical stability.

Modified PLGA-PEG-PLGA thermosensitive hydrogels with suitable thermosensitivity and properties for use in a drug delivery system.

PLGA-PEG-PLGA (PPP) triblock copolymer is the most widely studied thermosensitive hydrogel owing to its non-toxic, biocompatible, biodegradable, and thermosensitive properties. PPP thermosensitive hydrogels are being investigated as in situ gels because, at a low temperature, PPP solutions with drugs can be injected at the target site, and converted into a gel without surgical procedures. To meet the requirements of different therapeutic applications, PPP hydrogels with different properties need to be synthesized. The adjustable properties include the sol-gel transition temperature, gel window width, retention time and drug release time. Furthermore, thermo- and pH-, thermo- and electro-, and thermo- and photo-dual sensitive hydrogels are needed for some special therapies. Thus, this review examines the methods of modification of PPP thermosensitive hydrogels used to obtain desired drug delivery systems with appropriate physicochemical and pharmaceutical properties.

Effects of Pluronic F127-PEG multi-gel-core on the release profile and pharmacodynamics of Exenatide loaded in PLGA microspheres.

Pluronic F127 and PEG as a multi-gel-core were used to prepare Exenatide-loaded microspheres and store the drug within the microspheres. Also, the sol-gel transition and novel functions of the Pluronic F127-PEG gel core were investigated.Microspheres with a multi-gel-core (GCMs) and without a multi-gel-core (Ms) were compared in terms of the rate of PLGA degradation, therelease kinetics in vitro and the efficacy in KKAy mice. The drug release of GCMs was at a constant rate, and slower than Ms. In addition, after the KKAy mice were given Exenatide for 55days, the blood glucose concentration and HbA1c concentration in the GCMs group were lower than that in the Ms group. The obtained results demonstrated that a single injection of GCMs allowed the mice to maintain a stable blood glucose concentration for two weeks and their body weight was reduced more effectively than that in the Ms group. In addition, GCMs had a longer interval between dosing (two weeks) and a lower dosage(2.4µg/kg) than Bydureon(®) (one week, 33µg/kg). The bioactivity and release of macromolecular Exenatide was improved by the multi-gel-core structure:(1)The hydrophilic Exenatide tended to partition into the PEG chains of F127 and PEG homopolymer, and so it was protected from the organic solvent and vigorous stirring; (2)The macromolecular Exenatide was released both by diffusing through the hydrophilic F127-PEG chains and hydrophobic PLGA.