RESUMO
PtIr-based nanostructures are fascinating materials for application in bifunctional oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) catalysis. However, the fabrication of PtIr nanocatalysts with clear geometric features and structural configurations, which are crucial for enhancing the bifunctionality, remains challenging. Herein, PtCo@PtIr nanoparticles are precisely designed and fabricated with a quasi-octahedral PtCo nanocrystal as a highly atomically ordered core and an ultrathin PtIr atomic layer as a compressively strained shell. Owing to their geometric and core-shell features, the PtCo@PtIr nanoparticles deliver approximately six and eight times higher mass and specific activities, respectively, as an ORR catalyst than a commercial Pt/C catalyst. The half-wave potential of PtCo@PtIr exhibits a negligible decrease by 9 mV after 10 000 cycles, indicating extraordinary ORR durability because of the ordered arrangement of Pt and Co atoms. When evaluated using the ORR-OER dual reaction upon the introduction of Ir, PtCo@PtIr exhibits a small ORR-OER overpotential gap of 679 mV, demonstrating its great potential as a bifunctional electrocatalyst for fabricating fuel cells. The findings pave the way for designing precise intermetallic core-shell nanocrystals as highly functional catalysts.
RESUMO
Two-dimensional (2D) semiconducting transition metal dichalcogenides (TMDCs) are extensively employed as channel materials in advanced electronic devices. The electrical contacts between electrodes and 2D semiconductors play a crucial role in the development of high-performance transistors. While numerous strategies for electrode interface engineering have been proposed to enhance the performance of n-type 2D transistors, upgrading p-type ones in a similar manner remains a challenge. In this work, significant improvements in a p-type WSe2 transistor are demonstrated by utilizing metallic MoO2 nanosheets as the electrode contact, which are controllably fabricated through physical vapor deposition and subsequent annealing. The MoO2 nanosheets exhibit an exceptional electrical conductivity of 8.4 × 104 S mâ1 and a breakdown current density of 3.3 × 106 A cmâ2. The work function of MoO2 nanosheets is determined to be ≈5.1 eV, making them suitable for contacting p-type 2D semiconductors. Employing MoO2 nanosheets as the electrode contact in WSe2 transistors results in a notable increase in the field-effect mobility to 92.0 cm2 Vâ1 sâ1, which is one order of magnitude higher than the counterpart devices with conventional electrodes. This study not only introduces an intriguing 2D metal oxide to improve the electrical contact in p-type 2D transistors, but also offers an effective approach to fabricating all-2D devices.
RESUMO
Interfacial atomic configuration and its evolution play critical roles in the structural stability and functionality of mixed zero-dimensional (0D) metal nanoparticles (NPs) and two-dimensional (2D) semiconductors. In situ observation of the interface evolution at atomic resolution is a vital method. Herein, the directional migration and structural evolution of Au NPs on anisotropic ReS2 were investigated in situ by aberration-corrected transmission electron microscopy. Statistically, the migration of Au NPs with diameters below 3 nm on ReS2 takes priority with greater probability along the b-axis direction. Density functional theory calculations suggest that the lower diffusion energy barrier enables the directional migration. The coalescence kinetics of Au NPs is quantitatively described by the relation of neck radius (r) and time (t), expressed as r2=Kt. Our work provides an atomic-resolved dynamic analysis method to study the interfacial structural evolution of metal/2D materials, which is essential to the study of the stability of nanodevices based on mixed-dimensional nanomaterials.
RESUMO
Reining in deformation twinning is crucial for the mechanical properties of hexagonal close-packed (HCP) metals and hinges on an explicit understanding of the twinning nucleation mechanism. Unfortunately, it is often suggested rather than conclusively demonstrated that twinning nucleation can be mediated by pure atomic shuffles. Herein, by utilizing in situ high-resolution transmission electron microscopy, we have dissected the atomic shuffling mechanism during the {101Ì 2} twinning nucleation in rhenium nanocrystals, which revealed the emergence of an intermediate body-centered tetragonal (BCT) structure. Specifically, the double-layered prismatic planes initially shuffle into single-layered {11Ì 0}BCT planes; subsequently, adjacent {22Ì 0}BCT planes shuffle in opposite directions to form the basal planes of the twin embryo. This shuffling mechanism is further corroborated by molecular dynamic simulations. The finding provides direct evidence of shuffle-dominated twinning nucleation with atomic details that may lead to better control of this critical twinning mode in HCP metals.
RESUMO
The crystal growth kinetics is crucial for the controllable preparation and performance modulation of metal nanocrystals (NCs). However, the study of growth mechanisms is significantly limited by characterization techniques, and it is still challenging to in situ capture the growth process. Real-time and real-space imaging techniques at the atomic scale can promote the understanding of microdynamics for NC growth. Herein, the growth of Pd NCs on monolayer MoS2 under different atmospheres was in situ studied by environmental transmission electron microscopy. Introducing carbon monoxide can modulate the diffusion of Pd monomers, resulting in the epitaxial growth of Pd NCs with a uniform orientation. The electron energy loss spectroscopy and theoretical calculations showed that the CO adsorption assured the specific exposed facets and good uniformity of Pd NCs. The insight into the gas-solid interface interaction and the microscopic growth mechanism of NCs may shed light on the precise synthesis of NCs on two-dimensional (2D) materials.
RESUMO
Precisely controlling the microstructure of supported metal catalysts and regulating metal-support interactions at the atomic level are essential for achieving highly efficient heterogeneous catalysts. Strong metal-support interaction (SMSI) not only stabilizes metal nanoparticles and improves their resistance to sintering but also modulates the electrical interaction between metal species and the support, optimizing the catalytic activity and selectivity. Therefore, understating the formation mechanism of SMSI and its dynamic evolution during the chemical reaction at the atomic scale is crucial for guiding the structural design and performance optimization of supported metal catalysts. Recent advancements in in-situ transmission electron microscopy (TEM) have shed new light on these complex phenomena, providing deeper insights into the SMSI dynamics. Here, the research progress of in-situ TEM investigation on SMSI in heterogeneous catalysis is systematically reviewed, focusing on the formation dynamics, structural evolution during the catalytic reactions, and regulation methods of SMSI. The significant advantages of in-situ TEM technologies for SMSI research are also highlighted. Moreover, the challenges and probable development paths of in-situ TEM studies on the SMSI are also provided.
RESUMO
We introduce a "solution-processing-transformation" strategy, deploying solvent vapor as scaffolds, to fabricate high-quality hydrogen-bonded organic framework (HOF) membranes. This strategy can overcome the mismatch in processing conditions and crystal growth thermodynamics faced during the facile solution processing of the membrane. The procedure includes the vapor-trigged in situ transformation of dense amorphous supramolecules to crystalline HOF-16, with HOF-11 as the transient state. The mechanism involves a vapor-activated dissolution-precipitation equilibrium shifting and hydrogen bonding-guided molecule rearrangement, elucidated through combined experimental and theoretical analysis. Upon removal of the molecular scaffolds, the resulting HOF-16 membranes showcase significant improvement in hydrogen separation performance over their amorphous counterparts and previously reported HOF membranes. The method's broad applicability is evidenced by successfully extending it to other substrates and HOF structures. This study provides a fundamental understanding of guest-induced ordered supramolecular assembly and paves the way for the advanced manufacture of high-performance HOF membranes for gas separation processes.
RESUMO
Two-dimensional (2D) rare-earth oxyhalides (REOXs) with novel properties offer fascinating opportunities for fundamental research and applications. The preparation of 2D REOX nanoflakes and heterostructures is crucial for revealing their intrinsic properties and realizing high-performance devices. However, it is still a great challenge to fabricate 2D REOX using a general approach. Herein, we design a facile strategy to prepare 2D LnOCl (Ln = La, Pr, Nd, Sm, Eu, Gd, Tb, Dy) nanoflakes using the molten salt method assisted by the substrate. A dual-driving mechanism was proposed in which the lateral growth could be guaranteed by the quasi-layered structure of LnOCl and the interaction between the nanoflakes and the substrate. Furthermore, this strategy has also been successfully applied for block-by-block epitaxial growth of diverse lateral heterostructures and superlattice. More significantly, the high performance of MoS2 field-effect transistors with LaOCl nanoflake as the gate dielectric was demonstrated, exhibiting competitive device characteristics of high on/off ratios up to 107 and low subthreshold swings down to 77.1 mV dec-1. This work offers a deep understanding of the growth of 2D REOX and heterostructures, shedding new light on the potential applications in future electronic devices.
RESUMO
Nanocrystals play a key role in the modern energy, catalysis, semiconductor, and biology industries due to their unique structures and performances. However, controllable fabrication of ideal nanocrystals with the desired structures and properties is still challenging, which needs a deep understanding of their nucleation and growth process. Here, the research on nucleation and growth of nanocrystals studied by in situ transmission electron microscopy (TEM) is reviewed, mainly focusing on the atomic migration dynamics, interface evolution, and structure transformation. In addition, the challenges in the study of nanocrystal growth by TEM are discussed and the perspective on the future development of advanced in situ TEM techniques is provided. It is hoped that the review can give a deep insight into the nanocrystal nucleation and growth process, and further contribute to the rational design and precise fabrication of high-performance functional nanocrystals.
RESUMO
Li+ insertion-induced structure transformation in crystalline electrodes vitally influence the energy density and cycle life of secondary lithium-ion battery. However, the influence mechanism of structure transformation-induced Li+ migration on the electrochemical performance of micro-crystal materials is still unclear and the strategy to profit from such structure transformation remains exploited. Here, an interesting self-optimization of structure evolution during electrochemical cycling in Nb2 O5 micro-crystal with rich domain boundaries is demonstrated, which greatly improves the charge transfer property and mechanical strength. The lattice rearrangement activates the Li+ diffusion kinetics and hinders the particle crack, thus enabling a nearly zero-degeneration operation after 8000 cycles. Full cell paired with lithium cobalt oxides displays an exceptionally high capacity of 176 mA h g-1 at 8000 mA g-1 and excellent long-term durability at 6000 mA g-1 with 63% capacity retention over 2000 cycles. Interestingly, a unique fingerprint based on the intensity ratio of two X-ray diffraction peaks is successfully extracted as a measure of Nb2 O5 electrochemical performance. The structure self-optimization for fast charge transfer and high mechanical strength exemplifies a new battery electrode design concept and opens up a vast space of strategy to develop high-performance lithium-ion batteries with high energy density and ultra-long cycle life.
RESUMO
Electrostatic gating lies in the heart of field effect transistor (FET) devices and modern integrated circuits. To achieve efficient gate tunability, the gate electrode has to be placed very close to the conduction channel, typically a few nanometers. Remote control of a FET device through a gate electrode located far away is highly desirable, because it not only reduces the complexity of device fabrication, but also enables the design of novel devices with new functionalities. Here, a non-local electrostatic gating effect in graphene devices using scanning near-field optical microscopy (SNOM)-a technique that can probe local charge density in graphene-is reported. Remarkably, the charge density of the graphene region tens of micrometers away from a local gate can be efficiently tuned. The observed non-local gating effect is initially driven by an in-plane electric field induced by the quantum capacitance of graphene, and further largely enhanced by adsorbed polarized water molecules. This study reveals a non-local phenomenon of Dirac electrons, provides a deep understanding of in-plane screening from Dirac electrons, and paves the way for designing novel electronic devices with remote gate control.
RESUMO
A dual-mode DNA sensor was constructed to detect nucleic acid sensitively and selectively. Based on dendritic porous silica nanoparticles (DPSNs) and hybridization chain reaction (HCR) amplification strategy, the fabricated DNA sensor showed good sensitivity with low detection limits down to 2.18 pM and 4.02 pM by fluorescence (excited at 488 nm and emitted at 508 nm) and personal glucose meter (PGM) assays, respectively. This dual-mode detection of DNA offered superior reliability and accuracy and could meet the requirements of different testing environments, including laboratory confirmation and portable detection. Moreover, the impact of nanoparticles morphology on detection performance was also discussed. Due to the center-radial pores, DPSNs had high curvature morphology, which improved the coverage capacity, footprint, and deflection angle of probes. This work fabricated a dual-mode DNA sensor and revealed the relationship between morphology and detection performance, which brought new insights in novel biosensor development.
Assuntos
Técnicas Biossensoriais , DNA/química , Fluorometria/métodos , Nanopartículas/química , Dióxido de Silício , Humanos , Porosidade , Propriedades de SuperfícieRESUMO
The separation of ethylene (C2 H4 ) from a mixture of ethane (C2 H6 ), ethylene (C2 H4 ), and acetylene (C2 H2 ) at normal temperature and pressure is a significant challenge. The sieving effect of pores is powerless due to the similar molecular size and kinetic diameter of these molecules. We report a new modification method based on a stable ftw topological Zr-MOF platform (MOF-525). Introduction of a cyclopentadiene cobalt functional group led to new ftw-type MOFs materials (UPC-612 and UPC-613), which increase the host-guest interaction and achieve efficient ethylene purification from the mixture of hydrocarbon gases. The high performance of UPC-612 and UPC-613 for C2 H2 /C2 H4 /C2 H6 separation has been verified by gas sorption isotherms, density functional theory (DFT), and experimentally determined breakthrough curves. This work provides a one-step separation of the ternary gas mixture and can further serve as a blueprint for the design and construction of function-oriented porous structures for such applications.
RESUMO
N-doped carbon-encapsulated transition metal selenides (TMSs) have garnered increasing attention as promising electrocatalysts for hydrogen evolution reaction (HER). Accurately regulating the electronic structure of these nanohybrids to reveal the underlying mechanism for enhanced HER performances is still challenging and thus requires deep excavation. Herein, a series of pomegranate-like Nix Sey @NC core-shell nanohybrids (including Ni0.85 Se @ NC, NiSe2 @NC, and NiSe@NC) through controllable selenization of a Ni-MOF precursor is reported. The component of the nanohybrids can be fine-tuned by tailoring the selenization temperature and feed ratio, through which the electronic structure can be synchronously regulated. Among these nanohybrids, the Ni0.85 Se @ NC exhibits the optimum pH-universal HER performance with overpotentials of 131, 135, and 183 mV in 0.5 m H2 SO4 , 1.0 m KOH, and 1.0 m PBS, respectively, at 10 mA cm-2 , which are attributed to the increased partial density of state at the Fermi level and effective van der Waals interactions between Ni0.85 Se and NC matrix explained by density functional theory calculations.
RESUMO
Pt-based one-dimensional hollow nanostructures are promising catalysts in fuel cells with excellent activity. Herein, one-dimensional hollow FePt nanochains were shown to be efficient nanocatalysts in the hydrolysis of NaBH4. The characterization of composition, structure and morphology identifies an ultrathin shell (â¼3 nm) with uniformly distributed Fe30Pt70 constituents. The H2 generation rate of hollow Fe30Pt70 nanochains achieves 16.9 l/(min · g) at room temperature, while the activation energy is as low as 17.6 kJ mol-1 based on the fitting over the whole reaction time span. After the catalysis of NaBH4 hydrolysis, the morphology and composition of hollow FePt nanochains remain unchanged. Furthermore, the structural stability of hollow FePt nanochains under Ga+ ion irradiation is clarified. Theoretical simulation indicates that the stopping range of such a Fe30Pt70 shell is 7.7 keV, which offers a prediction that structure evolves diversely under Ga+ ions below and above such energy. The Ga+ ion irradiation experiments show a consistent trend with the simulation, where Ga+ ions with kinetic energy of 30 keV make the hollow architecture subside and sputter away, while Ga+ ions with kinetic energy of 5 keV only etch the top and lead to an eggshell structure.
RESUMO
Ordered and flexible porous frameworks with solution processability are highly desirable to fabricate continuous and large-scale membranes for the efficient gas separation. Herein, the first microporous hydrogen-bonded organic framework (HOF) membrane has been fabricated by an optimized solution-processing technique. The framework exhibits the superior stability because of the abundant hydrogen bonds and strong π-π interactions. Thanks to the flexible HOF structure, the membrane possesses the unprecedented pressure-responsive H2 /N2 separation performance. Furthermore, the scratched membrane can be healed by the treatment of solvent vapor, achieving the recovery of separation performance.
RESUMO
Fabricating ultrathin two-dimensional (2D) covalent organic framework (COF) nanosheets (NSs) in large scale and high yield still remains a great challenge. This limits the exploration of the unique functionalities and wide range of application potentials of such materials. Herein, we develop a scalable general bottom-up approach to facilely synthesize ultrathin (<2.1 nm) imine-based 2D COF NSs (including COF-366 NSs, COF-367 NSs, COF-367-Co NSs, TAPB-PDA COF NSs, and TAPB-BPDA COF NSs) in large scale (>100 mg) and high yield (>55%), via an imine-exchange synthesis strategy through adding large excess amounts of 2,4,6-trimethylbenzaldehyde into the reaction system under solvothermal conditions. Impressively, visualization of the periodic pore lattice for COF-367 NSs by a scanning tunneling microscope (STM) clearly discloses the ultrathin 2D COF nature. In particular, the ultrathin COF-367-Co NSs isolated are subject to the heterogeneous photocatalyst for CO2-to-CO conversion, showing excellent efficiency with a CO production rate as high as 10â¯162 µmol g-1 h-1 and a selectivity of ca. 78% in aqueous media under visible-light irradiation, far superior to corresponding bulk materials and comparable with the thus far reported state-of-the-art visible-light driven heterocatalysts.
RESUMO
Catalyst design plays vital roles in structurally relevant reactions. Revealing the catalyst structure and chemistry in the reactive environment at the atomic scale is imperative for the rational design of catalysts as well as the investigation of reaction mechanisms, while in situ characterization at the atomic scale at high temperature is still a great challenge. Here, tracking intermetallic Co7W6 nanocrystals with a defined structure and a high melting point by environmental aberration-corrected transmission electron microscopy in combination with in situ synchrotron X-ray absorption spectroscopy, we directly present the structural and chemical stability of the Co7W6 nanocrystals in methane, carbon monoxide, and hydrogen at temperatures of 700-1100 °C. The evidence is in situ and in real time with both atomic scaled resolution and collective information. The results are helpful in revealing the mechanism of structural-specified synthesis of single-walled carbon nanotubes. This research offers an example of systematic investigation at the atomic scale on catalysts under reactive conditions. Such catalysts presenting high structural stability may also find applications in other structure-specific synthesis.
RESUMO
Linker desymmetrization has been witnessed as a powerful design strategy for the discovery of highly connected metal-organic frameworks (MOFs) with unprecedented topologies. Herein, we introduce molecular pivot-hinge installation as a linker desymmetrization strategy to evolve the topology of highly connected rare-earth (RE) MOFs, where a pivot group is placed in the center of a linker similar to a hinge. By tuning the composition of pivot groups and steric hindrances of the substituents on various linker rotamers, MOFs with various topologies can be obtained. The combination of L-SO2 with C2v symmetry and 12-connected RE9 clusters leads to the formation of a fascinating (4,12)-c dfs new topology. Interestingly, when replacing L-SO2 with a tetrahedra linker L-O, the stacking behaviors of RE-organic layers switch from an eclipsed mode to a staggered stacking mode, leading to the discovery of an intriguing hjz topology. Additionally, the combination of the RE cluster and a linker [(L-(CH3 )6 )] with more bulky groups gives rise to a flu topology with a new 8-c inorganic cluster. The diversity of these RE-MOFs was further enhanced through post-synthetic installation of linkers with various functional groups. Functionalization of each linker with acidic and basic units in the mesoporous RE-based PCN-905-SO2 allows for efficient cascade catalytic transformation within the functionalized channels.
RESUMO
A barium(II) metal-organic framework (MOF) based on a predesigned amino-functionalized ligand, namely [Ba2 (L)(DMF)(H2 O)(NO3 )1/3 ]â DMFâ EtOHâ 2 H2 O (UPC-33) [H3 L=4,4'-((2-amino-5-carboxy-1,3-phenylene)bis(ethyne-2,1-diyl))dibenzoic acid] has been synthesized. UPC-33 is a 3-dimensional 3,18-connected network with fcu topology with a rare twelve-nuclear Ba12 (COO)18 (NO3 )2 cluster. UPC-33 shows permanent porosity and a high adsorption heat of CO2 (49.92â kJ mol-1 ), which can be used as a platform for selective adsorption of CO2 /CH4 (8.09). In addition, UPC-33 exhibits high separation selectivity for C3 light hydrocarbons with respect to CH4 (228.34, 151.40 for C3 H6 /CH4 , C3 H8 /CH4 at 273k and 1â bar), as shown by single component gas sorption and selectivity calculations. Due to the existence of -NH2 groups in the channels, UPC-33 can effectively catalyze Knoevenagel condensation reactions with high yield, and substrate size and electron dependency.