RESUMO
The toxicity of silver nanoparticles (AgNPs) depends on their physicochemical properties. The ongoing research aims to develop effective methods for modifying AgNPs using molecules that enable control over the processes induced by nanoparticles in both normal and cancerous cells. Application of amino acid-stabilized nanoparticles appears promising, exhibiting tunable electrokinetic properties. Therefore, this study focused on determining the influence of the surface charge of cysteine (CYS)-stabilized AgNPs on their toxicity towards human normal B (COLO-720L) and T (HUT-78) lymphocyte cell lines. CYS-AgNPs were synthesized via the chemical reduction. Transmission electron microcopy (TEM) imaging revealed that they exhibited a quasi-spherical shape with an average size of 18 ± 3 nm. CYS-AgNPs remained stable under mild acidic (pH 4.0) and alkaline (7.4 and 9.0) conditions, with an isoelectric point observed at pH 5.1. Following a 24 h treatment of lymphocytes with CYS-AgNPs, concentration-dependent alterations in cell morphology were observed. Positively charged CYS-AgNPs notably decreased lymphocyte viability. Furthermore, they exhibited grater genotoxicity and more pronounced disruption of biological membranes compared to negatively charged CYZ-AgNPs. Despite both types of AgNPs interacting similarly with fetal bovine serum (FBS) and showing comparable profiles of silver ion release, the biological assays consistently revealed that the positively charged CYS-AgNPs exerted stronger effects at all investigated cellular levels. Although both types of CYS-AgNPs have the same chemical structure in their stabilizing layers, the pH-induced alterations in their surface charge significantly affect their biological activity.
Assuntos
Cisteína , Nanopartículas Metálicas , Prata , Prata/química , Cisteína/química , Nanopartículas Metálicas/química , Nanopartículas Metálicas/toxicidade , Humanos , Sobrevivência Celular/efeitos dos fármacos , Linfócitos/efeitos dos fármacos , Linhagem Celular , Propriedades de Superfície , Concentração de Íons de Hidrogênio , Tamanho da PartículaRESUMO
Adsorption kinetics of human vimentin on negatively charged substrates (mica, silica, and polymer particles) was analyzed using atomic force microscopy (AFM), quartz microbalance (QCM), and the laser doppler velocimetry (LDV) method. AFM studies realized under diffusion conditions proved that the adsorbed protein layer mainly consisted of aggregates in the form of compact tetramers and hexamers of a size equal to 11-12 nm. These results were consistent with vimentin adsorption kinetics under flow conditions investigated by QCM. It was established that vimentin aggregates efficiently adsorbed on the negatively charged silica sensor at pH 3.5 and 7.4, forming compact layers with the coverage reaching 3.5 mg m-2. Additionally, the formation of the vimentin corona at polymer particles was examined using the LDV method and interpreted in terms of the electrokinetic model. This allowed us to determine the zeta potential of the corona as a function of pH and the electrokinetic charge of aggregates, which was equal to -0.7 e nm-2 at pH 7.4 in a 10 mM NaCl solution. The anomalous adsorption of aggregates exhibiting an average negative charge on the negatively charged substrates was interpreted as a result of a heterogeneous charge distribution. These investigations confirmed that it is feasible to deposit stable vimentin layers both at planar substrates and at carrier particles with well-controlled coverage and zeta potential. They can be used for investigations of vimentin interactions with various ligands including receptors of the innate immune system, immunoglobulins, bacterial virulence factors, and spike proteins of viruses.
Assuntos
Dióxido de Silício , Adsorção , Humanos , Cinética , Propriedades de Superfície , VimentinaRESUMO
Physicochemical properties of immunolatex, prepared by incubation of negatively charged polystyrene microparticles with polyclonal rabbit IgGs, were determined by a variety of experimental techniques. These comprised dynamic light scattering (DLS), laser Doppler velocimetry (LDV) and atomic force microscopy (AFM). The particle diffusion coefficient, the hydrodynamic diameter, the electrophoretic mobility, the zeta potential and the suspension stability were determined as a function of pH for different ionic strengths. The deposition of the immunolatex on bare and polyallylamine (PAH) functionalized mica was investigated using the microfluidic oblique impinging-jet cell, with an in situ, real-time image analysis module. The particle deposition kinetics was acquired by a direct particle enumeration procedure. The measurements enabled us to determine the range of pH where the specific deposition of the immunolatex on these substrates was absent. We argue that the obtained results have practical significance for conducting efficient flow immunoassays governed by specific antigen/antibody interactions.
Assuntos
Aglutinação , Poliestirenos , Animais , Coelhos , Cinética , Difusão Dinâmica da Luz , Microscopia de Força Atômica , Poliestirenos/química , Propriedades de SuperfícieRESUMO
The adsorption kinetics of the SARS-CoV-2 spike protein subunit with the receptor binding domain at abiotic surfaces was investigated. A combination of sensitive methods was used such as atomic force microscopy yielding a molecular resolution, a quartz microbalance, and optical waveguide lightmode spectroscopy. The two latter methods yielded in situ information about the protein adsorption kinetics under flow conditions. It was established that at pH 3.5-4 the protein adsorbed on mica and silica surfaces in the form of compact quasi-spherical aggregates with an average size of 14 nm. The maximum coverage of the layers was equal to 3 and 1 mg m-2 at pH 4 and 7.4, respectively. The experimental data were successfully interpreted in terms of theoretical results derived from modeling. The experiments performed for flat substrates were complemented by investigations of the protein corona formation at polymer particles carried out using in situ laser Doppler velocimetry technique. In this way, the zeta potential of the protein layers was acquired as a function of the coverage. Applying the electrokinetic model, these primary data were converted to the dependence of the subunit zeta potential on pH. It was shown that a complete acid-base characteristic of the layer can be acquired only using nanomolar quantities of the protein.
Assuntos
COVID-19 , Coroa de Proteína , Humanos , Adsorção , Glicoproteína da Espícula de Coronavírus , Polímeros , Propriedades de Superfície , Quartzo , Concentração de Íons de Hidrogênio , SARS-CoV-2 , Dióxido de Silício/química , ProteínasRESUMO
BACKGROUND: The rational chemical design of nanoparticles can be readily controlled and optimized by quantitatively studying protein adsorption at variously charged polymer carriers, determining their fate in biological fluids. We manufactured brain-derived neurotrophic factor (BDNF) -based electrostatic nanocomplexes with a different type of dendrimer core (anionic or cationic), encapsulated or not in polyethylene glycol (PEG), and studied their physicochemical properties and behavior in a biological setting. We investigated whether the electrokinetic charge of dendrimer core influences BDNF loading and desorption from the nanoparticle and serves as a determinant of nanoparticles' behavior in in vitro setting, influencing mitochondrial dysfunction, lipid peroxidation, and general nanoparticles' cellular toxicity. RESULTS: We found that the electrokinetic charge of the dendrimer core influences nanoparticles in terms of BDNF release profile from their surfaces and their effect on cell viability, mitochondrial membrane potential, cell phenotype, and induction of oxidative stress. The electrostatic interaction of positively charged core of nanoparticles with cell membranes increases their cytotoxicity, as well as serious phenotype alterations compared to negatively charged nanoparticles core in neuron-like differentiated human neuroblastoma cells. Moreover, PEG adsorption at nanoparticles with negatively charged core presents a distinct decrease in metabolic cell activity. On the contrary, charge neutralization due to PEG adsorption on the surface of nanoparticles with positively charged core does not reduce their cytotoxicity, makes them less biocompatible with differentiated cells, and presumably shows non-specific toxicity. CONCLUSIONS: The surface charge transformation after adsorption of protein or polyelectrolyte during nanocarriers formulation has an important role not only in designing nanomaterials with potent neuroprotective and neuroregenerative properties but also in applying them in a cellular environment.
Assuntos
Nanopartículas/química , Nanopartículas/toxicidade , Estresse Oxidativo , Proteínas/química , Adsorção , Humanos , Íons , Oxidopamina , Polietilenoglicóis/química , Polímeros , Eletricidade Estática , Propriedades de SuperfícieRESUMO
In many countries, work is being conducted to introduce Weigh-In-Motion (WIM) systems intended for continuous and automatic control of gross vehicle weight. Such systems are also called WIM systems for direct enforcement (e-WIM). The achievement of introducing e-WIM systems is conditional on ensuring constant, known, and high-accuracy dynamic weighing of vehicles. WIM systems weigh moving vehicles, and on this basis, they estimate static parameters, i.e., static axle load and gross vehicle weight. The design and principle of operation of WIM systems result in their high sensitivity to many disturbing factors, including climatic factors. As a result, weighing accuracy fluctuates during system operation, even in the short term. The article presents practical aspects related to the identification of factors disturbing measurement in WIM systems as well as methods of controlling, improving and stabilizing the accuracy of weighing results. Achieving constant high accuracy in weighing vehicles in WIM systems is a prerequisite for their use in the direct enforcement mode. The research results presented in this paper are a step towards this goal.
Assuntos
Movimento (Física) , Coleta de DadosRESUMO
The deposition kinetics of polymer particles with fibrinogen molecule coronas at bare and poly-L-lysine (PLL) modified mica was studied using the microfluid impinging-jet cell. Basic physicochemical characteristics of fibrinogen and the particles were acquired using dynamic light scattering and the electrophoretic mobility methods, whereas the zeta potential of the substrates was determined using streaming potential measurements. Subsequently, an efficient method for the preparation of the particles with coronas, characterized by a controlled fibrinogen coverage, was developed. This enabled us to carry out measurements, which confirmed that the deposition kinetics of the particles at mica vanished at pH above 5. In contrast, the particle deposition of PLL modified mica was at maximum for pH above 5. It was shown that the deposition kinetics could be adequately analyzed in terms of the mean-field approach, analogously to the ordinary colloid particle behavior. This contrasts the fibrinogen molecule behavior, which efficiently adsorbs at negatively charged substrates for the entire range pHs up to 9.7. These results have practical significance for conducting label-free immunoassays governed by the specific antigen/antibody interactions.
Assuntos
Silicatos de Alumínio/química , Coloides/química , Fibrinogênio/química , Fibrinogênio/metabolismo , Polímeros/química , Silicatos de Alumínio/metabolismo , Coloides/metabolismo , Humanos , Concentração de Íons de Hidrogênio , Concentração Osmolar , Polímeros/metabolismo , Especificidade por Substrato , Propriedades de SuperfícieRESUMO
Brain-derived neurotrophic factor (BDNF) is essential for the development and function of human neurons, therefore it is a promising target for neurodegenerative disorders treatment. Here, we studied BDNF-based electrostatic complex with dendrimer nanoparticles encapsulated in polyethylene glycol (PEG) in neurotoxin-treated, differentiated neuroblastoma SH-SY5Y cells, a model of neurodegenerative mechanisms. PEG layer was adsorbed at dendrimer-protein core nanoparticles to decrease their cellular uptake and to reduce BDNF-other proteins interactions for a prolonged time. Cytotoxicity and confocal microscopy analysis revealed PEG-ylated BDNF-dendrimer nanoparticles can be used for continuous neurotrophic factor delivery to the neurotoxin-treated cells over 24 h without toxic effect. We offer a reliable electrostatic route for efficient encapsulation and controlled transport of fragile therapeutic proteins without any covalent cross-linker; this could be considered as a safe drug delivery system. Understanding the polyvalent BDNF interactions with dendrimer core nanoparticles offers new possibilities for design of well-ordered protein drug delivery systems.
Assuntos
Fator Neurotrófico Derivado do Encéfalo , Dendrímeros/química , Portadores de Fármacos , Nanopartículas/química , Neuroblastoma/metabolismo , Fator Neurotrófico Derivado do Encéfalo/química , Fator Neurotrófico Derivado do Encéfalo/farmacocinética , Linhagem Celular Tumoral , Portadores de Fármacos/química , Portadores de Fármacos/farmacocinética , Humanos , Neurotoxinas/efeitos adversos , Polietilenoglicóis/química , Eletricidade EstáticaRESUMO
The adsorption kinetics of human serum fibrinogen at silica substrates was studied using optical waveguide lightmode spectroscopy (OWLS) and quartz crystal microbalance (QCM) techniques. Measurements were performed at pH 3.5, 4, and 7.4 for various ionic strengths. The experimental data were interpreted in terms of a hybrid random sequential adsorption model. This allowed the mass transfer rate coefficient for the OWLS cell and maximum coverages to be determined at various pHs. The appearance of different, pH-dependent mechanisms of fibrinogen adsorption on silica substrates was confirmed. At pH 3.5 the molecules mostly adsorb in the side-on orientation that produces a low maximum coverage of ca. 1 mg m-2. At this pH, the kinetics derived from the OWLS measurements agree with those theoretically predicted using the convective-diffusion theory. In consequence, a comparison of the OWLS and QCM results allows the water factor and the dynamic hydration of fibrinogen molecules to be determined. At pH 7.4, the OWLS method gives inaccurate kinetic data for the low coverage range. However, the maximum coverage that was equal to ca. 4 mg m-2 agrees with the QCM results and with previous literature results. It is postulated that the limited accuracy of the OWLS method for lower coverage stems from a heterogeneous structure of fibrinogen monolayers, which consist of side-on and end-on adsorbed molecules. One can expect that the results acquired in this work allow development of a robust procedure for preparing fibrinogen monolayers of well-controlled coverage and molecule orientation, which can be exploited for efficient immunosensing purposes.
Assuntos
Fibrinogênio/química , Dióxido de Silício/química , Adsorção , Fibrinogênio/metabolismo , Humanos , Concentração de Íons de Hidrogênio , Tamanho da Partícula , Técnicas de Microbalança de Cristal de Quartzo , Análise Espectral , Propriedades de SuperfícieRESUMO
Adsorption kinetics of human serum albumin (HSA) on silica substrates was studied using optical waveguide lightmode spectroscopy (OWLS) and quartz microbalance (QCM) techniques. Measurements were performed at pH 3.5, 5.6, and 7.4 for various bulk suspension concentrations and ionic strengths. The diffusion coefficient measurements showed that for pH 3.5 the HSA molecules are stable for NaCl concentrations from 10-3 to 0.15 M. This allowed us to precisely determine the mass transfer rate coefficients for the OWLS and QCM cells. The experimental data were adequately interpreted in terms of a hybrid random sequential adsorption model. The OWLS maximum coverage of HSA at pH 3.5, which is equal to 1.3 mg m-2, agrees with the QCM result and with previous results derived from streaming potential measurements. Thus, the results obtained at pH 3.5 served as reference data for the analysis of adsorption kinetics at higher pHs. In this way, it was confirmed that the adsorption kinetics of HSA molecules at pH 5.6 and 7.4 was considerably slower than at pH 3.5. This effect was attributed to aggregation of HSA solutions and interpreted in terms of a theoretical model combining the Smoluchowski aggregation theory with the convective diffusion mass transfer theory. New analytical equations were derived that can be used for the interpretation of other protein adsorption from unstable solutions.
Assuntos
Albumina Sérica Humana/química , Dióxido de Silício/química , Adsorção , Humanos , Concentração de Íons de Hidrogênio , Cinética , Estabilidade Proteica/efeitos dos fármacos , Técnicas de Microbalança de Cristal de Quartzo , Cloreto de Sódio/química , Análise EspectralRESUMO
An efficient method was developed enabling the synthesis of spheroidal polymer microparticles. Thorough physicochemical characteristics of the particles were acquired comprising the size, shape, electrophoretic mobility, and the diffusion coefficient. The particles were monodisperse, and their shape was well-fitted by prolate spheroids having the axis ratio equal to 4.17. Knowing the diffusion coefficient, their hydrodynamic diameter of 449 nm was calculated, which matched the value derived from Brenner's analytical expression. Particle deposition kinetics on mica and silicon/silica substrates, modified by poly(allylamine hydrochloride) (PAH) adsorption, was studied by optical microscopy and AFM imaging. The validity of the random sequential adsorption model was confirmed. Additionally, monolayers of the particles on these substrates were thoroughly characterized in situ by the streaming potential measurements for different ionic strengths. These measurements confirmed that the ζ potential change with the spheroidal particle coverage is less abrupt than for spheres and agrees with theoretical predictions. Exploiting these results, a useful analytical expression was derived that allows one to calculate the spheroidal particle coverage in situ via the streaming potential measurements. This expression, especially accurate for low coverage range, can be used for a quantitative interpretation of adsorption and desorption kinetics of anisotropic macromolecules, e.g., proteins on solid substrates.
RESUMO
The kinetics of the self-assembly of poly(styrene/α-tert-butoxy-ω-vinylbenzyl-polyglycidol) microparticles on poly(allylamine hydrochloride)-derivatized silicon/silica substrate was determined by direct AFM imaging and streaming potential (SP) measurements. The kinetic runs acquired under diffusion-controlled transport were quantitatively interpreted in terms of the extended random sequential adsorption (RSA) model. This allowed confirmation of a core/shell morphology of the microparticles. The polyglycidol-rich shell of thickness equal to 25 nm exhibited a fuzzy structure that enabled penetration of particles into each other resulting in high coverage inaccessible for ordinary microparticles. The SP measurements interpreted by using the 3D electrokinetic model confirmed this microparticle structure. Additionally, the acid-base characteristics of the microparticle monolayers were determined for a broad pH range. By using the streaming potential measurements, human serum albumin (HSA) adsorption on the microparticle monolayers was investigated under in situ conditions. It was confirmed that the protein adsorption was considerably lower than for the reference case of bare silicon/silica substrate under the same physicochemical conditions. This effect was attributed to the presence of the shell diminishing the protein/microparticle physical interactions.
Assuntos
Poliestirenos/química , Propilenoglicóis/química , Proteínas/química , Adsorção , Cinética , Microscopia de Força Atômica , Microesferas , Propriedades de SuperfícieRESUMO
Colloid particle deposition was applied to characterize bovine and human fibrinogen (Fb) monolayers on mica produced by controlled adsorption under diffusion transport at pH 3.5. The surface concentration of Fb was determined by AFM enumeration of single molecules adsorbed over the substrate surface. The electrokinetic properties of Fb monolayers for various ionic strength were studied using the in situ streaming potential measurements. It was shown that Fb adsorbs irreversibly on mica for a broad range of ionic strength of 4 × 10(-4) to 0.15 M, NaCl. The overcharging of initially negative mica surface occurred for fibrinogen surface concentrations higher than 1400 µm(-2). The orientation of fibrinogen molecules in the monolayers was evaluated by the colloid deposition method involving negatively charged polystyrene latex microspheres, 820 nm in diameter. An anomalous deposition of negative latex particles on substrates exhibiting a negative zeta potential was observed, which contradicts the mean-field DLVO predictions. Measurable deposition was observed even at low ionic strength where the minimum approach distance of latex particles to the interface exceeds 70 nm (for 6 × 10(-4) M NaCl). This confirms that, at this pH, fibrinogen molecules adsorb end-on on mica assuming extended conformations with the positive charge located mostly in the end part of the αA chains. This agrees with previous experimental and theoretical results discussed in the literature (Santore, M. M.; Wertz Ch. F. Protein spreading kinetics at liquid-solid interfaces via an adsorption probe method. Langmuir 2005, 21, 10172-10178 (experimental); Adamczyk, Z.; Barbasz, J.; Ciesla, M.; Mechanisms of fibrinogen adsorption at solid substrates. Langmuir, 2011, 25, 6868-6878 (theoretical)). This unusual latex deposition on Fb monolayers was quantitatively interpreted in terms of the model developed in ref 55 (Jin, X.; Wang, N. H. L.; Tarjus, G.; Talbot, J. Irreversible adsorption on nonuniform surfaces: the random site model. J. Phys. Chem. 1993, 97, 4256-4258). It was concluded that the colloid deposition method is an efficient tool for revealing protein adsorption mechanisms at solid/electrolyte interfaces.
Assuntos
Coloides/química , Fibrinogênio/química , Adsorção , Microscopia de Força Atômica , Proteínas/químicaRESUMO
Adsorption of fibrinogen was theoretically studied using the three-dimensional random sequential adsorption (RSA) model. Fibrinogen molecule shape was approximated by the bead model considering the presence of flexible side arms. Various cases were considered inter alia, the side-on adsorption mechanisms and the simultaneous side-on/end-on adsorption mechanism. The latter mechanisms is pertinent to fibrinogen adsorption at lower pH (below isoelectric point of 5.8) where the entire molecule is positively charged. Extensive calculations enabled one to determine the jamming surface concentration (coverage) of molecules adsorbed under the side-on and end-on orientations as well as the total coverage. For the simultaneous side-on/end-on model the maximum surface concentration was 7.29 × 10(3) µm(-2) corresponding to the protein coverage of 4.12 mg m(-2) (without considering hydration). Additionally, the surface blocking functions for different adsorption regimes were determined and analytically approximated for the entire range of coverage by the interpolating polynomials. Using these blocking functions, fibrinogen adsorption kinetics for diffusion controlled transport conditions was evaluated. Comparison of these theoretical results with experimental data was made. It was demonstrated that the simultaneous side-on/end-on model properly reflects the maximum coverage of fibrinogen adsorbed on latex particles determined via the electrokinetic (electrophoretic mobility) and AFM measurements. Also, streaming potential measurements of fibrinogen adsorption kinetics on mica were successfully interpreted in terms of this model. The theoretical results derived in this work have implications for basic science providing information on mechanisms of anisotropic protein adsorption.
Assuntos
Fibrinogênio/química , Adsorção , Concentração de Íons de Hidrogênio , Propriedades de SuperfícieRESUMO
The adsorption of anti-Salmonella rabbit immunoglobulin (IgaR) on negatively charged polymer particles leading to the formation of immunolatex was studied using various techniques comprising atomic force microscopy (AFM) and laser Doppler velocimetry (LDV). Initially, the basic physicochemical properties of IgaR molecules and the particles, inter alia their electrophoretic mobilities, the zeta potentials and hydrodynamic diameters, were determined under different ionic strengths and pHs. Applying AFM, single immunoglobulin molecules adsorbed on mica were also imaged, which allowed to determine their size. The adsorption of the IgaR molecules on the particles leading to changes in their electrophoretic mobility was monitored in situ using the LDV method. The obtained results were interpreted applying a general electrokinetic model which yielded quantitative information about the molecule coverage on the particles. The obtained immunolatex was thoroughly characterized with respect to its acid-base properties and its stability upon storage. Notably, the developed procedure demonstrated better efficiency compared to commercially applied methods, characterized by a higher immunoglobulin consumption.
Assuntos
Hidrodinâmica , Polímeros , Animais , Coelhos , Adsorção , Fluxometria por Laser-Doppler , Microscopia de Força Atômica , SalmonellaRESUMO
Molecular dynamic modeling and various experimental techniques, including multi-angle dynamic light scattering (MADLS), streaming potential, optical waveguide light spectroscopy (OWLS), quartz crystal microbalance with dissipation (QCM), and atomic force microscopy (AFM), were applied to determine the basic physicochemical parameters of fibroblast growth factor 21 in electrolyte solutions. The protein size and shape, cross-section area, dependence of the nominal charge on pH, and isoelectric point of 5.3 were acquired. These data enabled the interpretation of the adsorption kinetics of FGF 21 on bare and macrocation-covered silica investigated by OWLS and QCM. It was confirmed that the protein molecules irreversibly adsorbed on the latter substrate, forming layers with controlled coverage up to 0.8 mg m-2, while their adsorption on bare silica was much smaller. The viability of two cell lines, CHO-K1 and L-929, on both bare and macrocation/FGF 21-covered substrates was also determined. It is postulated that the acquired results can serve as useful reference systems for designing complexes that can extend the half-life of FGF 21 in its active state.
Assuntos
Fatores de Crescimento de Fibroblastos , Simulação de Dinâmica Molecular , Adsorção , Dióxido de Silício/química , Propriedades de SuperfícieRESUMO
Biomaterial science has contributed tremendously to developing nanoscale materials for delivering biologically active compounds, enhancing protein stability, and enabling its therapeutic use. This paper presents a process of formation of polyelectrolyte multilayer (PEM) prepared by sequential adsorption of positively charged polydiallyldimethylammonium chloride (PDADMAC) and negatively charged heparin sodium salt (HP), from low polyelectrolyte concentration, on a solid substrate. PEM was further applied as a platform for the adsorption of a brain-derived growth factor (BDNF), which is a protein capable of regulating neuronal cell development. The multilayers containing BDNF were thoroughly characterized by electrokinetic (streaming potential measurements, SPM) and optical (optical waveguide lightmode spectroscopy, OWLS) techniques. It was found that BDNF was significantly adsorbed onto polyelectrolyte multilayers terminated by HP under physiological conditions. We further explore the effect of established PEMs in vitro on the neuroblastoma SH-SY5Y cell line. An enzyme-linked immunosorbent assay (ELISA) confirmed that BDNF was released from multilayers, and the use of the PEMs intensified its cellular uptake. Compared to the control, PEMs with adsorbed BDNF significantly reduced cell viability and mitochondrial membrane polarization to as low as 72% and 58%, respectively. HPLC analysis showed that both PDADMAC-terminated and HP-terminated multilayers have antioxidative properties as they almost by half decreased lipid peroxidation in SH-SY5Y cells. Finally, enhanced formation of spheroid-like, 3D structures was observed by light microscopy. We offer a well-characterized PEM with antioxidant properties acting as a BDNF carrier, stabilizing BDNF and making it more accessible to cells in an inhomogeneous, dynamic, and transient in vitro environment. Described multilayers can be utilized in future biomedical applications, such as boosting the effect of treatment by selective anticancer as adjuvant therapy, and in biomedical research for future development of more precise neurodegenerative disease models, as they enhance cellular 3D structure formation.
Assuntos
Neuroblastoma , Doenças Neurodegenerativas , Humanos , Heparina/farmacologia , Heparina/química , Polieletrólitos/química , Fator Neurotrófico Derivado do Encéfalo , Neuroblastoma/tratamento farmacológicoRESUMO
Vimentin, a protein that builds part of the cytoskeleton and is involved in many aspects of cellular function, was recently identified as a cell surface attachment site for the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The present study investigated the physicochemical nature of the binding between the SARS-CoV-2 S1 glycoprotein receptor binding domain (S1 RBD) and human vimentin using atomic force microscopy and a quartz crystal microbalance. The molecular interactions of S1 RBD and vimentin proteins were quantified using vimentin monolayers attached to the cleaved mica or a gold microbalance sensor as well as in its native extracellular form present on the live cell surface. The presence of specific interactions between vimentin and S1 RBD was also confirmed using in silico studies. This work provides new evidence that cell-surface vimentin (CSV) functions as a site for SARS-CoV-2 virus attachment and is involved in the pathogenesis of Covid-19, providing a potential target for therapeutic countermeasures.
Assuntos
COVID-19 , Humanos , SARS-CoV-2/metabolismo , Glicoproteína da Espícula de Coronavírus/química , Vimentina/metabolismo , Enzima de Conversão de Angiotensina 2/metabolismo , Ligação ProteicaRESUMO
Controlling cellular adhesion is a critical step in the development of biomaterials, and in cell- based biosensing assays. Usually, the adhesivity of cells is tuned by an appropriate biocompatible layer. Here, synthetic poly(diallyldimethylammonium chloride) (PDADMAC), natural chitosan, and heparin (existing in an extracellular matrix) were selected to assembly PDADMAC/heparin and chitosan/heparin films. The physicochemical properties of macroion multilayers were determined by streaming potential measurements (SPM), quartz crystal microbalance (QCM-D), and optical waveguide lightmode spectroscopy (OWLS). The topography of the wet films was imaged using atomic force microscopy (AFM). The adhesion of preosteoblastic cell line MC3T3-E1 on those well-characterized polysaccharide-based multilayers was evaluated using a resonant waveguide grating (RWG) based optical biosensor and digital holographic microscopy. The latter method was engaged to investigate long-term cellular behavior on the fabricated multilayers. (PDADMAC/heparin) films were proved to be the most effective in inducing cellular adhesion. The cell attachment to chitosan/heparin-based multilayers was negligible. It was found that efficient adhesion of the cells occurs onto homogeneous and rigid multilayers (PDADMAC/heparin), whereas the macroion films forming "sponge-like" structures (chitosan/heparin) are less effective, and could be employed when reduced adhesion is needed. Polysaccharide-based multilayers can be considered versatile systems for medical applications. One can postulate that the presented results are relevant not only for modeling studies but also for applied research.
Assuntos
Técnicas Biossensoriais , Quitosana , Quitosana/química , Polissacarídeos/farmacologia , Heparina/farmacologia , Heparina/química , Adesão Celular , Propriedades de SuperfícieRESUMO
Molecular dynamics modeling was applied to predict chitosan molecule conformations, the contour length, the gyration radius, the effective cross-section and the density in electrolyte solutions. Using various experimental techniques the diffusion coefficient, the hydrodynamic diameter and the electrophoretic mobility of molecules were determined. This allowed to calculate the zeta potential, the electrokinetic charge and the effective ionization degree of the chitosan molecule as a function of pH and the temperature. The chitosan solution density and zero shear dynamic viscosity were also measured, which enabled to determine the intrinsic viscosity increment. The experimental results were quantitatively interpreted in terms of the slender body hydrodynamics exploiting molecule characteristics derived from the modeling. It is also confirmed that this approach can be successfully used for a proper interpretation of previous literature data obtained under various physicochemical conditions.