Gate-tunable contact-induced Fermi-level shift in semimetal.

Low-dimensional semimetal­semiconductor (Sm-S) van der Waals (vdW) heterostructures have shown their potentials in nanoelectronics and nano-optoelectronics recently. It is an important scientific issue to study the interfacial charge transfer as well as the corresponding Fermi-level shift in Sm-S systems. Here we investigated the gate-tunable contact-induced Fermi-level shift (CIFS) behavior in a semimetal single-walled carbon nanotube (SWCNT) that formed a heterojunction with a transition-metal dichalcogenide (TMD) flake. A resistivity comparison methodology and a Fermi-level catch-up model have been developed to measure and analyze the CIFS, whose value is determined by the resistivity difference between the naked SWCNT segment and the segment in contact with the TMD. Moreover, the relative Fermi-level positions of SWCNT and two-dimensional (2D) semiconductors can be efficiently reflected by the gate-tunable resistivity difference. The work function change of the semimetal, as a result of CIFS, will naturally introduce a modified form of the Schottky­Mott rule, so that a modified Schottky barrier height can be obtained for the Sm-S junction. The methodology and physical model should be useful for low-dimensional reconfigurable nanodevices based on Sm-S building blocks.

Engineering van der Waals Contacts by Interlayer Dipoles.

Tuning the interfacial Schottky barrier with van der Waals (vdW) contacts is an important solution for two-dimensional (2D) electronics. Here we report that the interlayer dipoles of 2D vdW superlattices (vdWSLs) can be used to engineer vdW contacts to 2D semiconductors. A bipolar WSe2 with Ba6Ta11S28 (BTS) vdW contact was employed to exhibit this strategy. Strong interlayer dipoles can be formed due to charge transfer between the Ba3TaS5 and TaS2 layers. Mechanical exfoliation breaks the superlattice and produces two distinguished surfaces with TaS2 and Ba3TaS5 terminations. The surfaces thus have opposite surface dipoles and consequently different work functions. Therefore, all the devices fall into two categories in accordance with the rectifying direction, which were verified by electrical measurements and scanning photocurrent microscopy. The growing vdWSL family along with the addition surface dipoles enables prospective vdW contact designs and have practical application in nanoelectronics and nano optoelectronics.

Unraveling the genetic link: an umbrella review on HLA-B*15:02 and antiepileptic drug-induced Stevens-Johnson syndrome/toxic epidermal necrolysis.

PURPOSE: This umbrella review was conducted to summarize the association between HLA*1502 allele with antiepileptic induced Stevens-Johnson syndrome (SJS) and toxic epidermal necrolysis (TEN). METHODS: Pubmed, Scopus and EMBASE were searched for eligible reviews in May 2023. Two authors independently screened titles and abstracts and assessed full-text reviews for eligibility. The quality of meta-analyses and case-control studies was appraised with Assessing the Methodological Quality of Systematic Reviews 2 and Newcastle-Ottawa Scale, respectively. Narrative summaries of each antiepileptic drug were analyzed. Preestablished protocol was registered on the International Prospective Register of Systematic Reviews Registry(ID: CRD42023403957). RESULTS: Included studies are systematic reviews, meta-analyses and case-control studies evaluating the association of HLA-B*1502 allele with the following antiepileptics. Seven meta-analyses for carbamazepine, three meta-analyses for lamotrigine (LTG), three case-control studies for oxcarbazepine, nine case-control studies for phenytoin and four case-control studies for phenobarbitone were included. The findings of this umbrella review suggest that there is a strong association between HLA-B-1502 with SJS/TEN for carbamazepine and oxcarbazepine and a milder association for lamotrigine and phenytoin. CONCLUSION: In summary, although HLA-B*1502 is less likely to be associated with phenytoin or lamotrigine-induced SJS/TEN compared to carbamazepine-induced SJS/TEN, it is a significant risk factor that if carefully screened, could potentially reduce the development of SJS/TEN. In view of potential morbidity and mortality, HLA-B*1502 testing may be beneficial in patients who are initiating lamotrigine/phenytoin therapy. However, further studies are required to examine the association of other alleles with the development of SJS/TEN and to explore the possibility of genome-wide association studies before initiation of treatment.

Synergistic Effects of Doping and Strain in Bismuth Catalysts for CO2 Electroreduction.

Doping is a recognized method for enhancing catalytic performance. The introduction of strains is a common consequence of doping, although it is often overlooked. Differentiating the impact of doping and strain on catalytic performance poses a significant challenge. In this study, Cu-doped Bi catalysts with substantial tensile strain are synthesized. The synergistic effects of doping and strain in bismuth result in a remarkable CO2RR performance. Under optimized conditions, Cu1/6-Bi demonstrates exceptional formate Faradaic efficiency (>95%) and maintains over 90% across a wide potential window of 900 mV. Furthermore, it delivers an industrial-relevant partial current density of -317 mA cm-2 at -1.2 VRHE in a flow cell, while maintaining its selectivity. Additionally, it exhibits exceptional long-term stability, surpassing 120 h at -200 mA cm-2. Through experimental and theoretical mechanistic investigations, it has been determined that the introduction of tensile strain facilitates the adsorption of *CO2, thereby enhancing the reaction kinetics. Moreover, the presence of Cu dopants and tensile strain further diminishes the energy barrier for the formation of *OCHO intermediate. This study not only offers valuable insights for the development of effective catalysts for CO2RR through doping, but also establishes correlations between doping, lattice strains, and catalytic properties of bismuth catalysts.

Consistency in human papillomavirus type detection between self-collected vaginal specimens and physician-sampled cervical specimens.

With the rising need for accessible cervical cancer screening, self-sampling methods offer a promising alternative to traditional physician-led sampling. This study aims to evaluate the efficacy of the HygeiaTouch Self Sampling Kit for Women in detecting human papillomavirus (HPV) types and predicting cervical lesions. We studied the concordance in identifying high-risk HPV (hrHPV) types between samples collected by physicians and those self-collected by women using a self-sampling kit for validation. Women aged 21-65, fitting into specific categories based on their cervical health history were eligible. Cohen's kappa coefficient to gauge concordance between the two specimen types and relative accuracy metrics in identifying cervical intraepithelial neoplasia (CIN) were also calculated, with physician-sampled specimens serving as a reference. A total of 1210 participants from three institutes were involved. The self-sampling kit closely matched the physician-led method in terms of collecting valid specimens (100% vs. 100%), identifying hrHPV types (kappa: 0.75, 95% confidence interval [95% CI]: 0.72-0.79; agreement: 87.7%, 95% CI: 85.8-89.6) and predicting CIN grade 2 or worse (CIN2+) (relative sensitivity: 0.949, relative accuracy: 0.959). Kappa values varied between 0.71 and 0.83 for different hrHPV types and combinations, with an overall value 0.75 (95% CI: 0.72-0.79) signifying robust compatibility between the two methods. Our study underscores the potential of the HygeiaTouch Self Sampling Kit as a reliable, efficient, and user-friendly alternative to traditional sampling methods. This suggests that self-sampling could be pivotal in expanding cervical cancer screening accessibility and enhancing detection rates.

Dual-Region Computed Tomography Radiomics-Based Machine Learning Predicts Subcarinal Lymph Node Metastasis in Patients with Non-small Cell Lung Cancer.

BACKGROUND: Noninvasively and accurately predicting subcarinal lymph node metastasis (SLNM) for patients with non-small cell lung cancer (NSCLC) remains challenging. This study was designed to develop and validate a tumor and subcarinal lymph nodes (tumor-SLNs) dual-region computed tomography (CT) radiomics model for predicting SLNM in NSCLC. METHODS: This retrospective study included NSCLC patients who underwent lung resection and SLNs dissection between January 2017 and December 2020. The radiomic features of the tumor and SLNs were extracted from preoperative CT, respectively. Ninety machine learning (ML) models were developed based on tumor region, SLNs region, and tumor-SLNs dual-region. The model performance was assessed by the area under the curve (AUC) and validated internally by fivefold cross-validation. RESULTS: In total, 202 patients were included in this study. ML models based on dual-region radiomics showed good performance for SLNM prediction, with a median AUC of 0.794 (range, 0.686-0.880), which was superior to those of models based on tumor region (median AUC, 0.746; range, 0.630-0.811) and SLNs region (median AUC, 0.700; range, 0.610-0.842). The ML model, which is developed by using the naive Bayes algorithm and dual-region features, had the highest AUC of 0.880 (range of cross-validation, 0.825-0.937) among all ML models. The optimal logistic regression model was inferior to the optimal ML model for predicting SLNM, with an AUC of 0.727. CONCLUSIONS: The CT radiomics showed the potential for accurately predicting SLNM in NSCLC patients. The ML model with dual-region radiomic features has better performance than the logistic regression or single-region models.

Fabrication and characterization of a two-dimensional individually addressable electrowetting microlens array: erratum.

The authors present an erratum to update the Acknowledgements section in their published article, ["Fabrication and characterization of a two-dimensional individually addressable electrowetting microlens array," Opt. Express31, 30550 (2023)10.1364/OE.497992].

Astragaloside IV promotes exosome secretion of endothelial progenitor cells to regulate PI3KR2/SPRED1 signaling and inhibit pyroptosis of diabetic endothelial cells.

BACKGROUND AIMS: Treating chronic non-healing diabetic wounds and achieving complete skin regeneration has always been a critical clinical challenge. METHODS: In order to address this issue, researchers conducted a study aiming to investigate the role of miR-126-3p in regulating the downstream gene PIK3R2 and promoting diabetic wound repair in endothelial progenitor cell (EPC)-derived extracellular vesicles. The study involved culturing EPCs with astragaloside IV, transfecting them with miR-126-3p inhibitor or mock plasmid, interfering with high glucose-induced damage in human umbilical vein endothelial cells (HUVECs) and treating diabetic skin wounds in rats. RESULTS: The healing of rat skin wounds was observed through histological staining. The results revealed that treatment with miR-126-3p-overexpressing EPC-derived extracellular vesicles accelerated the healing of rat skin wounds and resulted in better tissue repair with slower scar formation. In addition, the transfer of EPC-derived extracellular vesicles with high expression of miR-126-3p to high glucose-damaged HUVECs increased their proliferation and invasion, reduced necrotic and apoptotic cell numbers and improved tube formation. In this process, the expression of angiogenic factors vascular endothelial growth factor (VEGF)A, VEGFB, VEGFC, basic fibroblast growth factor and Ang-1 significantly increased, whereas the expression of caspase-1, NRLP3, interleukin-1ß, inteleukin-18, PIK3R2 and SPRED1 was suppressed. Furthermore, miR-126-3p was able to target and inhibit the expression of the PIK3R2 gene, thereby restoring the proliferation and migration ability of high glucose-damaged HUVEC. CONCLUSIONS: In summary, these research findings demonstrate the important role of miR-126-3p in regulating downstream genes and promoting diabetic wound repair, providing a new approach for treating chronic non-healing diabetic wounds.

Neuronal Nitric Oxide Synthase Regulates Cerebellar Parallel Fiber Slow EPSC in Purkinje Neurons by Modulating STIM1-Gated TRPC3-Containing Channels.

Responding to burst stimulation of parallel fibers (PFs), cerebellar Purkinje neurons (PNs) generate a convolved synaptic response displaying a fast excitatory postsynaptic current (EPSCFast) followed by a slow EPSC (EPSCSlow). The latter is companied with a rise of intracellular Ca2+ and critical for motor coordination. The genesis of EPSCSlow in PNs results from activation of metabotropic type 1 glutamate receptor (mGluR1), oligomerization of stromal interaction molecule 1 (STIM1) on the membrane of endoplasmic reticulum (ER) and opening of transient receptor potential canonical 3 (TRPC3) channels on the plasma membrane. Neuronal nitric oxide synthase (nNOS) is abundantly expressed in PFs and granule neurons (GNs), catalyzing the production of nitric oxide (NO) hence regulating PF-PN synaptic function. We recently found that nNOS/NO regulates the morphological development of PNs through mGluR1-regulated Ca2+-dependent mechanism. This study investigated the role of nNOS/NO in regulating EPSCSlow. Electrophysiological analyses showed that EPSCSlow in cerebellar slices of nNOS knockout (nNOS-/-) mice was significantly larger than that in wildtype (WT) mice. Activation of mGluR1 in cultured PNs from nNOS-/- mice evoked larger TRPC3-channel mediated currents and intracellular Ca2+ rise than that in PNs from WT mice. In addition, nNOS inhibitor and NO-donor increased and decreased, respectively, the TRPC3-current and Ca2+ rise in PNs. Moreover, the NO-donor effectively decreased TRPC3 currents in HEK293 cells expressing WT STIM1, but not cells expressing a STIM1 with cysteine mutants. These novel findings indicate that nNOS/NO inhibits TRPC3-containig channel mediated cation influx during EPSCSlow, at least in part, by S-nitrosylation of STIM1.

Key role of K+ and Ca2+ in high-yield ethanol production by S. Cerevisiae from concentrated sugarcane molasses.

BACKGROUND: Saccharomyces cerevisiae is an important microorganism in ethanol synthesis, and with sugarcane molasses as the feedstock, ethanol is being synthesized sustainably to meet growing demands. However, high-concentration ethanol fermentation based on high-concentration sugarcane molasses-which is needed for reduced energy consumption of ethanol distillation at industrial scale-is yet to be achieved. RESULTS: In the present study, to identify the main limiting factors of this process, adaptive laboratory evolution and high-throughput screening (Py-Fe3+) based on ARTP (atmospheric and room-temperature plasma) mutagenesis were applied. We identified high osmotic pressure, high temperature, high alcohol levels, and high concentrations of K+, Ca2+, K+ and Ca2+ (K+&Ca2+), and sugarcane molasses as the main limiting factors. The robust S. cerevisiae strains of NGT-F1, NGW-F1, NGC-F1, NGK+, NGCa2+ NGK+&Ca2+-F1, and NGTM-F1 exhibited high tolerance to the respective limiting factor and exhibited increased yield. Subsequently, ethanol synthesis, cell morphology, comparative genomics, and gene ontology (GO) enrichment analysis were performed in a molasses broth containing 250 g/L total fermentable sugars (TFS). Additionally, S. cerevisiae NGTM-F1 was used with 250 g/L (TFS) sugarcane molasses to synthesize ethanol in a 5-L fermenter, giving a yield of 111.65 g/L, the conversion of sugar to alcohol reached 95.53%. It is the highest level of physical mutagenesis yield at present. CONCLUSION: Our results showed that K+ and Ca2+ ions primarily limited the efficient production of ethanol. Then, subsequent comparative transcriptomic GO and pathway analyses showed that the co-presence of K+ and Ca2+ exerted the most prominent limitation on efficient ethanol production. The results of this study might prove useful by promoting the development and utilization of green fuel bio-manufactured from molasses.

Optical Information Transmission and Multimode Fluorescence Anticounterfeiting of Ca2-xMgxGe7O16:Mn2.

Multimode emission of Mn2+ for multimode fluorescence anticounterfeiting is achieved by cation site and interstitial occupancy in Ca2-xMgxGe7O16. The rings in Ca2-xMgxGe7O16 have a significant distortion for Mn2+ ions to enter the ring interstitials with a luminescence center at 665 nm, which is supported by XRD refinement results and first-principles calculations. The interstitial Mn2+ ion has good thermal stability with an activation energy of 0.36 eV. Surprisingly, these two luminescence centers, the cation site Mn and the interstitial Mn, have an obvious afterglow, and the disappearing afterglow will reappear by heating or irradiating with the 980 nm laser. The afterglow is significantly enhanced, as MnO2 is used as the manganese source, which is explained in detail by the thermal luminescence spectrum. Finally, Ca2-xMgxGe7O16:Mn2+ fully demonstrates its excellent prospects in fluorescent anticounterfeiting, information encryption, and optical information storage.

Recent Development in Sensitizers for Lanthanide-Doped Upconversion Luminescence.

The attractive features of lanthanide-doped upconversion luminescence (UCL), such as high photostability, nonphotobleaching or photoblinking, and large anti-Stokes shift, have shown great potentials in life science, information technology, and energy materials. Therefore, UCL modulation is highly demanded toward expected emission wavelength, lifetime, and relative intensity in order to satisfy stringent requirements raised from a wide variety of areas. Unfortunately, the majority of efforts have been devoted to either simple codoping of multiple activators or variation of hosts, while very little attention has been paid to the critical role that sensitizers have been playing. In fact, different sensitizers possess different excitation wavelengths and different energy transfer pathways (to different activators), which will lead to different UCL features. Thus, rational design of sensitizers shall provide extra opportunities for UCL tuning, particularly from the excitation side. In this review, we specifically focus on advances in sensitizers, including the current status, working mechanisms, design principles, as well as future challenges and endeavor directions.

Expanding the Spectrum of EWSR1::CREM Fusion Tumors: An Unusual Pediatric Intranasal Myxoid Tumor.

EWSR1::CREM gene fusions are increasingly being recognized in a diverse number of soft tissue tumors, including well-defined entities such as angiomatoid fibrous histiocytoma or clear cell sarcoma, and other unclassifiable tumors. As a group, EWSR1::CREM fused tumors often demonstrate primitive spindle or epithelioid cells, myxoid stroma, and a broad immunophenotype. Herein we present an unusual case of a child diagnosed with an intranasal malignant myxoid tumor harboring an EWSR1::CREM gene fusion. To the best of our knowledge, this is the first case of intranasal myxoid tumor with this particular fusion. Diagnosis and management of the case is discussed.

Detecting outliers beyond tolerance limits derived from statistical process control in patient-specific quality assurance.

BACKGROUND: Tolerance limit is defined on pre-treatment patient specific quality assurance results to identify "out of the norm" dose discrepancy in plan. An out-of-tolerance plan during measurement can often cause treatment delays especially if replanning is required. In this study, we aim to develop an outlier detection model to identify out-of-tolerance plan early during treatment planning phase to mitigate the above-mentioned risks. METHODS: Patient-specific quality assurance results with portal dosimetry for stereotactic body radiotherapy measured between January 2020 and December 2021 were used in this study. Data were divided into thorax and pelvis sites and gamma passing rates were recorded using 2%/2 mm, 2%/1 mm, and 1%/1 mm gamma criteria. Statistical process control method was used to determine six different site and criterion-specific tolerance and action limits. Using only the inliers identified with our determined tolerance limits, we trained three different outlier detection models using the plan complexity metrics extracted from each treatment field-robust covariance, isolation forest, and one class support vector machine. The hyperparameters were optimized using the F1-score calculated from both the inliers and validation outliers' data. RESULTS: 308 pelvis and 200 thorax fields were used in this study. The tolerance (action) limits for 2%/2 mm, 2%/1 mm, and 1%/1 mm gamma criteria in the pelvis site are 99.1% (98.1%), 95.8% (91.1%), and 91.7% (86.1%), respectively. The tolerance (action) limits in the thorax site are 99.0% (98.7%), 97.0% (96.2%), and 91.5% (87.2%). One class support vector machine performs the best among all the algorithms. The best performing model in the thorax (pelvis) site achieves a precision of 0.56 (0.54), recall of 1.0 (1.0), and F1-score of 0.72 (0.70) when using the 2%/2 mm (2%/1 mm) criterion. CONCLUSION: The model will help the planner to identify an out-of-tolerance plan early so that they can refine the plan further during the planning stage without risking late discovery during measurement.

Repurposing DailyQA3 for an efficient and spot position sensitive daily quality assurance tool for proton therapy.

INTRODUCTION: Daily quality assurance is an integral part of a radiotherapy workflow to ensure the dose is delivered safely and accurately to the patient. It is performed before the first treatment of the day and needs to be time and cost efficient for a multiple gantries proton center. In this study, we introduced an efficient method to perform QA for output constancy, range verification, spot positioning accuracy and imaging and proton beam isocenter coincidence with DailyQA3. METHODS: A stepped acrylic block of specific dimensions is fabricated and placed on top of the DailyQA3 device. Treatment plans comprising of two different spread-out Bragg peaks and five individual spots of 1.0 MU each are designed to be delivered to the device. A mathematical framework to measure the 2D distance between the detectors and individual spot is introduced and play an important role in realizing the spot positioning and centering QA. Lastly, a 5 months trends of the QA for two gantries are presented. RESULTS: The outputs are monitored by two ion chambers in the DailyQA3 and a tolerance of ± 3 % $ \pm 3\% $ are used. The range of the SOBPs are monitored by the ratio of ion chamber signals and a tolerance of ± 1 mm $ \pm 1\ {\mathrm{mm}}$ is used. Four diodes at ± 10 cm $ \pm 10\ {\mathrm{cm}}$ from the central ion chambers are used for spot positioning QA, while the central ion chamber is used for imaging and proton beam isocenter coincidence QA. Using the framework, we determined the absolute signal threshold corresponding to the offset tolerance between the individual proton spot and the detector. A 1.5 mm $1.5\ {\mathrm{mm}}$ tolerances are used for both the positioning and centering QA. No violation of the tolerances is observed in the 5 months trends for both gantries. CONCLUSION: With the proposed approach, we can perform four QA items in the TG224 within 10 min.

Trends by age and sex and projections of disease prevalence from studying hypertensive heart disease in China over the past three decades.

BACKGROUND: Hypertensive heart disease (HHD) is a common cause of cardiovascular disease and mortality worldwide, and its burden is increasing with aging populations. OBJECTIVES: This study aimed to estimate the prevalence and mortality rates of HHD in mainland China and Taiwan Province using data from the Global Burden of Disease Study 2019 (GBD 2019), and forecast the development trend of HHD from 2020 to 2024. METHODS: We obtained data on number of cases, deaths, crude prevalence rate, crude death rate, age-standardized prevalence rate (ASPR), and age-standardized death rate (ASDR) for mainland China and Taiwan Province from 1990 to 2019 from the GBD 2019. Joinpoint software was used to estimate average annual percentage change (AAPC) with 95% confidence intervals, and the number of HHD cases in China from 2022 to 2024 was predicted by the exponential smoothing method. RESULTS: Between 1990 and 2019, HHD cases and deaths increased in mainland China, but the ASPR and ASDR decreased by 5.96% and 48.72%, respectively. In Taiwan Province, ASPR and ASDR decreased by 7.66% and 52.14%, respectively. The number of HHD cases and death rates varied by region, age, and sex, with a higher number of cases in mainland China than in Taiwan Province. By 2024, the number of HHD cases in mainland China was projected to be over 9.6 million cases, and in Taiwan Province, it was projected to surpass 120,000 cases. CONCLUSION: The differences in HHD cases between mainland China and Taiwan Province in terms of age and sex indicated the need for effective prevention and control measures, especially targeting the elderly population. These findings can inform policymakers and health professionals in the development of targeted prevention and treatment strategies and resource allocation for HHD in China.

The High Stability and Selectivity of Electrochemical Sensor Using Low-Cost Diamond Nanoparticles for the Detection of Anti-Cancer Drug Flutamide in Environmental Samples.

In this study, a novel electrochemical sensor was created by fabricating a screen-printed carbon electrode with diamond nanoparticles (DNPs/SPCE). The successful development of the sensor enabled the specific detection of the anti-cancer drug flutamide (FLT). The DNPs/SPCE demonstrated excellent conductivity, remarkable electrocatalytic activity, and swift electron transfer, all of which contribute to the advantageous monitoring of FLT. These qualities are critical for monitoring FLT levels in environmental samples. Various structural and morphological characterization techniques were employed to validate the formation of the DNPs. Remarkably, the electrochemical sensor demonstrated a wide linear response range (0.025 to 606.65 µM). Additionally, it showed a low limit of detection (0.023 µM) and high sensitivity (0.403 µA µM-1 cm-2). Furthermore, the practicability of DNPs/SPCE can be successfully employed in FLT monitoring in water bodies (pond water and river water samples) with satisfactory recoveries.

Graphene Microheater Chips for In Situ TEM.

Low-dimensional materials are bringing significant innovations to in situ TEM characterization. Here a new graphene microheater chip for TEM was developed by stacking graphene on a suspended SiNx membrane as the Joule heating element. It could be heated up to 800 °C within 26.31 ms with a low power consumption of 0.025 mW/1000 µm2. The bulging was only ∼50 nm at 650 °C, which is 2 orders of magnitude smaller than those of conventional MEMS heaters at similar temperatures. The performances benefit from the employment of graphene, since its monolayer structure greatly reduces the heat capacity, and the vdW contact significantly reduces the interfacial interaction. The TEM observation on the Sn melting process verifies its great potential in resolving thermodynamic processes. Moreover, more multifunctional in situ chips could be developed by integrating other stimuli to such chips. This work opens a new frontier for both graphene and in situ characterization techniques.

Meta-analysis of multi-modality therapies in sinonasal undifferentiated carcinoma-A timely update.

OBJECTIVES: Sinonasal undifferentiated carcinoma (SNUC) is a rare but aggressive tumour with very poor prognosis. There are currently no well-established clinical trials to guide therapy and the impact of various treatment modalities on survival is not well defined. We aim to provide an updated systematic review on current treatment modalities on survival outcomes. DESIGN AND SETTING: Individual patient data were extracted, and survival data pooled in a one-stage meta-analysis. Descriptive statistics were analysed using the Kaplan-Meier method. Patient-level comparisons stratified by treatment modalities, adjusted for demographics, were conducted using shared-frailty Cox regression. PARTICIPANTS AND MAIN OUTCOME MEASURES: Participants include all patients diagnosed with SNUC based on histological evidence. We looked at the overall cumulative survival outcome for different treatment modalities and overall survival by treatment modality in low versus high stage SNUC patients. RESULTS AND CONCLUSION: Seventeen studies were identified, comprising 208 patients from 1993 to 2020. There was no significant difference in cumulative overall survival in low versus high stage patients, and no significant difference in outcomes by treatment modality. The overall cumulative survival of SNUC is 30% at 95 months. Among patients treated with various combinations of treatment modalities, patients with chemoradiotherapy had the highest cumulative survival of 42% at 40 months. Definitive chemoradiotherapy was associated with improved disease survival rate. Regardless of tumour stage, patients should be treated early and aggressively, with no superiority of one treatment regimen over another. Trimodality treatment does not confer survival advantage over bimodality treatment.

Topical oxygen therapy and singlet oxygen in wound healing: A scoping review.

The aim of this scoping review was to provide an overview of current research into topical oxygen therapies including the under-researched singlet oxygen for wound healing. A scoping review was undertaken using five databases. After duplicates and ineligible studies were excluded, 49 studies were included for a narrative review. Out of the included 49 studies, 45 (91.8%) were published in the past 10 years (2013-2023) with 32 (65.3%) published in the past 5 years (2018-2023). Eight of the studies were systematic reviews and/or meta-analysis and 18 were RCTs. The search identified zero human RCTs on singlet oxygen, but one human cohort study and five studies in animals. There is evidence that topical oxygen therapy may be useful for the treatment of chronic wounds, mainly diabetic foot ulcers. Singlet oxygen has shown potential, but would need further confirmation in controlled human trials, including more research to understand the bio-properties.