Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 7 de 7
Filtrar
Mais filtros

Base de dados
Tipo de documento
Intervalo de ano de publicação
1.
Int J Mol Sci ; 22(21)2021 Nov 05.
Artigo em Inglês | MEDLINE | ID: mdl-34769431

RESUMO

The article discusses the release process of doxorubicin hydrochloride (DOX) from multi-wall carbon nanotubes (MWCNTs). The studies described a probable mechanism of release and actions between the surface of functionalized MWCNTs and anticancer drugs. The surface of carbon nanotubes (CNTs) has been modified via treatment in nitric acid to optimize the adsorption and release process. The modification efficiency and physicochemical properties of the MWCNTs+DOX system were analyzed by using SEM, TEM, EDS, FTIR, Raman Spectroscopy and UV-Vis methods. Based on computer simulations at pH 7.4 and the experiment at pH 5.4, the kinetics and the mechanism of DOX release from MWNT were discussed. It has been experimentally observed that the acidic pH (5.4) is appropriate for the efficient release of the drug from CNTs. It was noted that under acidic pH conditions, which is typical for the tumour microenvironment almost 90% of the drug was released in a relatively short time. The kinetics models based on different mathematical functions were used to describe the release mechanism of drugs from MWCNTs. Our studies indicated that the best fit of experimental kinetic curves of release has been observed for the Power-law model and the fitted parameters suggest that the drug release mechanism of DOX from MWCNTs is controlled by Fickian diffusion. Molecular dynamics simulations, on the other hand, have shown that in a neutral pH solution, which is close to the blood pH, the release process does not occur keeping the aggregation level constant. The presented studies have shown that MWCNTs are promising carriers of anticancer drugs that, depending on the surface modification, can exhibit different adsorption mechanisms and release.


Assuntos
Antineoplásicos/química , Doxorrubicina/química , Sistemas de Liberação de Medicamentos/métodos , Nanotubos de Carbono/química , Antineoplásicos/farmacocinética , Doxorrubicina/farmacocinética , Liberação Controlada de Fármacos , Concentração de Íons de Hidrogênio , Cinética , Simulação de Dinâmica Molecular , Análise Espectral Raman/métodos
2.
Int J Mol Sci ; 21(21)2020 Nov 03.
Artigo em Inglês | MEDLINE | ID: mdl-33153137

RESUMO

This study provides deep insight into the adsorption process of doxorubicin onto different types of carbon nanotubes that have been proved to show attractive properties as a drug delivery system. The main aim of the work was to propose probable adsorption mechanisms and interactions between the anticancer drug and surface of modified and pristine carbon nanotubes at blood pH. The carbon nanotubes were oxidized to optimize the absorbance efficiency relative to that of pristine multiwalled carbon nanotubes. The adsorption isotherm of the modified system was well described by the Temkin equation. It confirms that the adsorption in the system studied involves also hydrogen and covalent bonding and is exothermic in nature. The experimental kinetic curves of adsorption were fitted to different mathematical models to check if the kinetics of doxorubicin adsorption onto the modified multiwalled carbon nanotubes follows a pseudo-second-order model and the chemical sorption is bound to be the rate-limiting. On the basis of the molecular dynamics simulation, it was shown that in vacuo the aggregation tendency of doxorubicin molecules is far more favorable than their adsorption on pristine carbon nanotubes (CNTs). It suggests that only functionalization of the nanotube surface can affect the interaction between doxorubicin and functional groups of the carriers and increases the efficiency of the drug loading process.


Assuntos
Doxorrubicina/farmacocinética , Nanotubos de Carbono/química , Adsorção , Varredura Diferencial de Calorimetria , Simulação por Computador , Concentração de Íons de Hidrogênio , Interações Hidrofóbicas e Hidrofílicas , Cinética , Simulação de Dinâmica Molecular , Espectrometria por Raios X , Propriedades de Superfície , Termogravimetria , Poluentes Químicos da Água/farmacocinética
3.
Int J Mol Sci ; 21(16)2020 Aug 13.
Artigo em Inglês | MEDLINE | ID: mdl-32823747

RESUMO

Inspired by the unusual shapes of the titration curve observed for many surfactants and mixed colloidal systems, we decided to extend the analysis to isothermal titration calorimetric curves (ITC) by paying special attention to potential structural changes in micellar aggregates. In this paper, we used isothermal titration calorimetry in conjunction with Scanning Transmission Electron Microscopy (STEM), Small-Angle Neutron Scattering (SANS) and X-ray Scattering (SAXS) methods support by Monte Carlo and semiempirical quantum chemistry simulations to confirm if the isothermal calorimetric curve shape can reflect micelle transition phenomena. For that purpose, we analysed, from the thermodynamic point of view, a group of cationic gemini surfactants, alkanediyl-α,ω-bis(dimethylalkylammonium) bromides. We proposed the shape of aggregates created by surfactant molecules in aqueous solutions and changes thereof within a wide temperature range. The results provide evidence for the reorganization processes and the relationship (dependence) between the morphology of the created aggregates and the conditions such as temperature, surfactant concentration and spacer chain length which affect the processes.


Assuntos
Calorimetria , Micelas , Temperatura , Simulação por Computador , Teoria da Densidade Funcional , Cinética , Método de Monte Carlo , Difração de Nêutrons , Polímeros/química , Espalhamento a Baixo Ângulo , Tensoativos/química , Água/química
4.
J Chem Phys ; 148(23): 231101, 2018 Jun 21.
Artigo em Inglês | MEDLINE | ID: mdl-29935523

RESUMO

Network characteristics in physical gels composed of solvated block copolymers varying in molecular design are examined here by dynamic rheology and computer simulations. In two triblock copolymer series, one with chain length (N) varied at constant copolymer composition (f) and the other with f varied at constant N, we discern the dependence of equilibrium network metrics on both N and f. Increasing the block number in a linear multiblock series at constant N and f escalates conformational complexity, which dominates network connectivity classified according to a midblock conformation index.

5.
J Chem Phys ; 141(12): 121103, 2014 Sep 28.
Artigo em Inglês | MEDLINE | ID: mdl-25273403

RESUMO

Molecularly asymmetric triblock copolymers progressively grown from a parent diblock copolymer can be used to elucidate the phase and property transformation from diblock to network-forming triblock copolymer. In this study, we use several theoretical formalisms and simulation methods to examine the molecular-level characteristics accompanying this transformation, and show that reported macroscopic-level transitions correspond to the onset of an equilibrium network. Midblock conformational fractions and copolymer morphologies are provided as functions of copolymer composition and temperature.

6.
ACS Appl Mater Interfaces ; 9(46): 39940-39944, 2017 Nov 22.
Artigo em Inglês | MEDLINE | ID: mdl-29131574

RESUMO

In the presence of a midblock-selective solvent, triblock copolymers not only self-organize but also form a molecular network. Thermoplastic elastomer gels constitute examples of such materials and serve as sealants and adhesives, as well as ballistic, microfluidic, and electroactive media. We perform Monte Carlo and dissipative particle dynamics simulations to investigate the phase behavior and network characteristics of these materials. Of particular interest is the existence of a truncated octahedral morphology that resembles the atomic arrangement of various inorganic species. Both simulation approaches quantify the midblock bridges responsible for network development and thus provide a detailed molecular picture of these composition-tunable soft materials.

7.
Artigo em Inglês | MEDLINE | ID: mdl-25679554

RESUMO

While ABC triblock copolymers are known to form a plethora of dual-mode (i.e., order-on-order) nanostructures, bicomponent ABA triblock copolymers normally self-assemble into single morphologies at thermodynamic incompatibility levels up to the strong-segregation regime. In this study, we employ on-lattice Monte Carlo simulations to examine the phase behavior of molecularly asymmetric A(1)BA(2) copolymers possessing chemically identical endblocks differing significantly in length. In the limit of superstrong segregation, interstitial micelles composed of the minority A(2) endblock are observed to arrange into two-dimensional hexagonal arrays along the midplane of B-rich lamellae in compositionally symmetric (50:50 A:B) copolymers. Simulations performed here establish the coupled molecular-asymmetry and incompatibility conditions under which such micelles form, as well as the temperature dependence of their aggregation number. Beyond an optimal length of the A(2) endblock, the propensity for interstitial micelles to develop decreases, and the likelihood for colocation of both endblocks in the A(1)-rich lamellae increases. Interestingly, the strong-segregation theory of Semenov developed to explain the formation of free micelles by diblock copolymers accurately predicts the onset of interstitial micelles confined at nanoscale dimensions between parallel lamellae.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA