RESUMO
Conspectusπ-Conjugated polymers have gained significant interest because of their potential applications in optoelectronics, bioelectronics, and other domains. The controlled synthesis of π-conjugated block polymers optimizes their performance and enables novel properties and functions. However, precise control of the self-assembled architectures of π-conjugated polymers remains a formidable challenge. Inspired by the precise helical architectures of biomacromolecules, the helical polymers and the supramolecular helical assemblies have gained significant attention. Helical polymers with an excess of one-handed helicity can be optically active with a strong tendency toward self-assembly. Incorporating a helical polymer into a π-conjugated polymer can induce asymmetric helical assemblies, leading to novel chiral materials with unique functionalities.To control the self-assembly of architectures, π-conjugated polymers are usually synthesized into block copolymers by incorporating a polymer with self-assembling characteristics. Although various π-conjugated block copolymers have been produced, precise and asymmetric self-assembly is still challenging and has rarely been addressed. Incorporating helical polymers into the π-conjugated polymers can induce a precise and asymmetric self-assembly, which transfers the chirality of the helical polymer block to the π-conjugated polymer, resulting in chiral supramolecular architectures with unique chiroptical properties and functionalities. However, synthesizing hybrid block copolymers containing two distinct polymer blocks is complicated. Some general strategies such as connecting the chain ends of two preformed homopolymers and extending the chain of a prefabricated π-conjugated polymer with a second monomer are time-consuming and require complex synthetic protocols. Therefore, developing novel strategies for the facile synthesis of π-conjugated block copolymers with a predictable molar mass, low dispersity, and tunable composition is of practical importance.Recently, we investigated a controlled synthesis of helical polyisocyanides, helical polyallenes, and helical polycarbenes by developing advanced Pd(II) and Ni(II) catalysts. These helical polymers were successfully incorporated into π-conjugated polymers, including polythiophene, polyfluorene, and poly(phenyleneethynylene), via a one-pot sequential living block polymerization of the two distinct monomers using Pd(II)- or Ni(II)-complexes as catalysts. As a result, a variety of well-defined π-conjugated block copolymers containing helical polymeric blocks were readily synthesized. Although the copolymerized monomers possess different structures and polymerization mechanisms, the one-pot block copolymerization followed a living polymerization mechanism and provided the desired π-conjugated block copolymers in high yields with controlled molar mass, narrow size distribution, and tunable composition.Remarkably, the helical polymeric block induces the π-conjugated block copolymer asymmetric self-assembly into a supramolecular, one-handed helical architecture resulting in distinct optical properties. More interestingly, by utilizing the crystallization of conjugated blocks and one-handed helical blocks, the crystallization-driven and helix-induced precise asymmetric living self-assembly yielded a family of uniform and single-handed helical architectures with controlled dimensions, narrow distribution, and well-defined helicity. The transfer of helical chirality to the supramolecular architectures rendered the achiral π-conjugated blocks with unique chiroptical properties such as the emission of white light over a broad optical spectrum and the circularly polarized luminescence.
RESUMO
Porous frameworks with controlled pore structure and tunable aperture are greatly demanded. However, precise synthesis of this kind of materials is a formidable challenge. Herein, we report the fabrication of two-dimensional (2D) supramolecular polymer frameworks using a precisely synthesized rod-like helical polyisocyanide as link. Four three-arm star-shaped polyisocyanides with the degree of the polymerization of 10, 20, 30 and 40, and having 2-ureido-4[1H]-pyrimidinone (UPy) terminals were synthesized. 2D-Crystalline polymer frameworks with apertures of 5.3, 10.1, 13.9, and 19.1â nm were respectively obtained through intermolecular hydrogen bonding interaction between the terminal Upy units. The pore aperture is dependent on the length of polyisocyanide backbone. Thus, well-defined supramolecular polymer frameworks with controlled and uniform hexagonal pores were obtained, as proved by small-angle X-ray scattering (synchrotron radiation facility), atomic force microscopy, and Brunauer-Emmett-Teller analyses. The frameworks with uniform large pore aperture were used to purify nanomaterials and immobilize biomacromolecules. For instance, the membranes of the polymer frameworks could size-fractionation of silver nanoparticles into uniform nanoparticles with very low dispersity. The frameworks with large aperture facilitated the inclusion of myoglobin and enhanced the stability and catalytic activity.
RESUMO
The development of chiral alignment media for measuring anisotropic NMR parameters provides an opportunity to determine the absolute configuration of chiral molecules without the need for derivatization. However, chiral alignment media with a high and robust enantiodiscriminating property for a wide range of chiral molecules are still scarce. In this study, we synthesized cholesterol-end-functionalized helical polyisocyanides from a chiral monomer using a cholesterol-based alkyne-Pd(II) initiator. These stereoregular polyisocyanides form stable and weak anisotropic lyotropic liquid crystals (LLCs) in dichloromethane systems, exhibiting highly optical activities in both single left- and right-handed helices. The preparation process of the media was straightforward, and the aligning property of the LLCs could be controlled by adjusting the concentration and temperature. Using the chiral polyisocyanides, we extracted the residual dipolar coupling for an enantiomeric pair of isopinocampheol (IPC), as well as a number of pharmaceutical molecules, demonstrating excellent enantiodiscriminating properties for a broad range of chiral compounds.
RESUMO
Recently, cyclic polymers have attracted increasing interest due to their unique topologies, properties, and functions compared to the linear analogues. This mini-review focuses on the recent advances in the synthesis and applications of cyclic polymers. First, the main synthetic methods for cyclic polymers, namely ring closure and ring expansion methods, are presented and discussed, followed by a review on the exploration of the properties and applications of synthetic cyclic polymers. Finally, a critical assessment of the preliminary studies exploring the efficient synthesis and potential applications of cyclic polymers are presented, and the remaining challenges in the field as well as ideas for solving these challenges will be discussed.
RESUMO
In this work, π-conjugated block copolymers consisting of poly(phenyl isocyanide) (PPI) and polyfluorene (PF) segments are facilely prepared by one-pot sequential polymerization of phenyl isocyanide (monomer 1) and 7-bromo-9,9-dioctylfluorene-2-boronic acid pinacol ester (monomer 2). The Pd(II)-terminated PPI is first prepared via polymerizing monomer 1 catalyzed with phenyl alkyne-Pd(II) complex and then utilized to initiate the controlled Suzuki cross-coupling polymerization of monomer 2, yielding various PPI-b-PF copolymers possessing controlled molar mass and narrow dispersity. Owing to the helical conformation of PPI segment and π-conjugated structure of PF segment, PPI-b-PF copolymers present distinctive optical property and fascinating chiral self-assembly behavior. During the self-assembly process, chirality transfer from helical PPI block to the supramolecular aggregates of helical nanofibers occurs to afford optically active helical nanofibers with high optical activity. Furthermore, the self-assembled helical nanofibers exhibit excellent circularly polarized luminescence performance.
Assuntos
Cianetos , Luminescência , Cianetos/química , Polímeros/química , Conformação Molecular , PolimerizaçãoRESUMO
Developing high performance and environment-friendly fluoropolymers is greatly desired. In this work, we found that 2-diazo-1,1,1-trifluoroethane can be polymerized by air-stable alkyne-palladium(II) catalysts following a living polymerization mechanism, affording a fluoropolymer, poly(trifluoromethyl methylene) in high yield with controlled molar mass and low dispersity. This polymer bears trifluoromethyl on every main chain atom and thus has good resistance to chemical corrosion, high hydrophobicity, and excellent dielectric constant with low dielectric loss. Due to the steric hindrance between the trifluoromethyl pendants, the synthetic poly(trifluoromethyl methylene) can twist into a stable helix. The one-handed preferred helices synthesized using chiral PdII -catalysts exhibit high optical activity and circularly polarized luminescence. Remarkably, such polymer can be completely degraded to (E)-1,1,1,4,4,4-hexafluorobut-2-ene at high temperatures (>280 °C). Additionally, taking advantage of the living chain end, the polymer can be further modified.
RESUMO
Inspired by biological helices (e.g., DNA), artificial helical polymers have attracted intense attention. However, precise synthesis of one-handed helices from achiral materials remains a formidable challenge. Herein, a series of achiral poly(biphenyl allene)s with controlled molar mass and low dispersity were prepared and induced into one-handed helices using chiral amines and alcohols. The induced one-handed helix was simultaneously memorized, even after the chiral inducer was removed. The switchable induction processes were visible to naked eye; the achiral polymers exhibited blue emission (irradiated at 365â nm), whereas the induced one-handed helices exhibited cyan emission with clear circularly polarized luminescence. The induced helices formed stable gels in various solvents with helicity discrimination ability: the same-handed helix gels were self-healing, whereas the gels of opposite-handed helicity were self-sorted. Moreover, the induced helices could separate enantiomers via enantioselective crystallization with high efficiency and switchable enantioselectivity.
RESUMO
A pair of enantiomeric photoswitchable PdII catalysts, alkyne-PdII /LR-azo and alkyne-PdII /LS-azo , were prepared via the coordination of alkyne-PdII and azobenzene-modified phosphine ligands LR-azo and LS-azo . Owing to the cis-trans photoisomerization of the azobenzene moiety, alkyne-PdII /LR-azo and alkyne-PdII /LS-azo exhibited different polymerization activities, helix-sense selectivities, and enantioselectivities during the polymerization of isocyanide monomers under irradiation of different wavelength lights. Furthermore, the achiral isocyanide monomer A-1 could be polymerized efficiently using alkyne-PdII /LR-azo under dark condition in a living/controlled manner. Further, it generated single right-handed helical poly-A-1m (LR-azo ), confirmed by the circular dichroism spectra and atomic force microscopy images. However, the polymerization of A-1 almost could not be initiated under 420â nm light in identical conditions of dark condition. Moreover, the photoswitchable catalyst alkyne-PdII /LR-azo exhibited high enantioselectivity for the polymerization of the racemates of L-1 and D-1, respectively. D-1 was polymerized preferentially under dark condition with a D-1/L-1 rate ratio of 70, yielding single right-handed polyisocyanides. Additionally, reversible enantioselectivity was observed under 420â nm light using alkyne-PdII /LR-azo , and the calculated polymerization rate ratio of L-1/D-1 was 57 because of the isomerization of the azobenzene moiety of the catalyst. Furthermore, alkyne-PdII /LS-azo showed opposite enantioselectivity and helix-sense selectivity during the polymerization of the racemates of L-1 and D-1.
RESUMO
Inspired by the perfect helical structures and the resulting exquisite functions of biomacromolecules, helical polymers have attracted increasing attention in recent years. Polyisocyanide is well known for its distinctive rodlike helical structure and various applications in chiral recognition, enantiomer separation, circularly polarized luminescence, liquid crystallization, and other fields. Although various methods and catalysts for isocyanide polymerization have been reported, the precise synthesis of helical polyisocyanides with controlled molecular weight, low dispersity, and high tacticity remains a formidable challenge. Owing to a limited synthesis strategy, the controlled synthesis of topological polyisocyanides has barely been realized. This Accounts highlights our recent endeavors to explore novel catalysts for the living polymerization of isocyanides. Fortunately, we discovered that alkyne-Pd(II) catalysts could initiate the living polymerization of isocyanides, resulting in helical polyisocyanides with controlled structures, high tacticity, and tunable compositions. These catalysts are applicable to various isocyanide monomers, including alkyl isocyanides, aryl isocyanides, and diisocyanobenzene derivatives. Incorporating chiral bidentate phosphine ligands onto alkyne-Pd(II) complexes formed chiral Pd(II) catalysts, which promoted the asymmetric living polymerization of achiral isocyanide, yielding single left- and right-handed helices with highly optical activities.Using alkyne-Pd(II) catalysts, various topological polyisocyanides have been facilely prepared, including hybrid block copolymers, bottlebrush polymers, core cross-linked star polymers, and organic/inorganic nanoparticles. For instance, various hybrid block polyisocyanides were easily produced by coupling alkyne-Pd(II)-catalyzed living isocyanide polymerization with controlled radical polymerization and ring-opening polymerization (ROP). Combining the ring-opening metathesis polymerization (ROMP) of norbornene with Pd(II)-catalyzed isocyanide polymerization, bottlebrush polyisocyanides and core cross-linked star polymers were easily prepared. Pd(II)-catalyzed living polymerization of poly(lactic acid)s with isocyanide termini resulted in densely grafted bottlebrush polyisocyanides with closely packed side chains. Moreover, the surface-initiated living polymerization of isocyanides produced a family of polyisocyanide-grafted organic/inorganic hybrid nanoparticles using nanoparticles with alkyne-Pd(II) catalysts anchored on the surfaces. Surprisingly, the nanoparticles and star polymers with helical polyisocyanide arms performed exceptionally well in terms of chiral recognition and resolution. Incorporated organocatalysts such as proline and prolinol units onto the pendants of optically active helical polyisocyanides, a family of polymer-based chiral organocatalysts, were generated, which showed significantly improved stereoselectivity for the asymmetric Aldol reaction and Michael addition and can be easily recycled.Using a chiral alkyne-Pd(II) catalyst, single-handed helical polyisocyanides bearing naphthalene and pyrene probes were produced from achiral isocyanide monomers. These polymers showed excellent self-sorting properties as revealed using a fluorescence resonance energy transfer (FRET) investigation and were self-assembled into two-dimensional (2D) smectic nanostructures driven by both helicity and chain length. Incorporating helical poly(phenyl isocyanide) (PPI) onto semiconducting poly(3-hexylthiophene) (P3HT) induced the asymmetric assembly of the resulting P3HT-b-PPI copolymers into single-handed cylindrical micelles with controlled dimensions and tunable photoluminescence.
RESUMO
The measurement of anisotropic residual dipolar couplings (RDCs) parameters for the structure elucidation of organic molecules relies on suitable alignment media. Employment of self-assembled liquid crystalline systems to create anisotropic alignment can be an effective way to realize aligned samples and acquire RDCs. This Mini-review highlights the recent advances on amino acid-based helical polymers and supramolecular oligomers forming rigid, rod-like structures that aggregate into ordered liquid crystalline phases, including amino acid-based helical polyisocyanides, polyacetylenes, polypeptides, and oligopeptides assembled alignment media. The methodology for the determination of anisotropic liquid crystals is briefly discussed, and a summary of recent research progress in the enantiodifferentiation of helical polymers aligned media is followed. In addition, the self-assembled mechanism of oligopeptides and their RDCs structural analysis are also described.
Assuntos
Cristais Líquidos , Aminoácidos , Cristais Líquidos/química , Espectroscopia de Ressonância Magnética/métodos , Oligopeptídeos , PolímerosRESUMO
End-functionalization is an effective strategy for constructing functional materials. A method for chain-end functionalization of helical polycarbenes is herein developed that relied on Sonogashira coupling reaction. In this work, a family of helical polycarbenes with controlled molecular mass (Mn ) and low polydispersity (Mw /Mn ) is readily prepared using Pd(II) and the Wei-Phos ligand as initiator. The Pd(II) complex is confirmed to remain at the chain end of polycarbene. Subsequently, a series of terminal alkyne derivatives with interesting functional groups, including the F atom, aldehyde, or anthracene groups, are synthesized. They could be installed at the chain end of polycarbene through Sonogashira coupling reaction catalyzed by the Pd(II) complex at the chain end. Moreover, a couple of hybrid block copolymers are easily obtained by installing terminal alkynes modified by another type of polymer. The structures of the isolated polymers are confirmed by 1 H nuclear magnetic resonance (1 H NMR), 19 F nuclear magnetic resonance (19 F NMR), 31 P nuclear magnetic resonance (31 P NMR), and Fourier transform infrared spectroscopy (FT-IR), respectively. The self-assembly properties of the hybrid block copolymers are also investigated by atomic force spectroscopy analysis. By the hereby developed method, various functional groups can be introduced at the chain end of helical polycarbenes for constructing functional polymer materials, moreover, the transition metal residues at the end of polymer chains can be easily removed.
Assuntos
Alcinos , Polímeros , Ligantes , Espectroscopia de Ressonância Magnética , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Helical polymers present some interesting and distinctive properties, and one of the most distinguished applications of them is the chiral recognition and resolution of enantiomers. In this work, star-shaped hybrid helical poly (phenyl isocyanide) (PPI) with polyhedral oligomeric silsesquioxanes (POSS) as the core was designed and synthesized by "grafting to" strategy. The homoarm star-shaped hybrid POSS-(PPI)8 was first obtained by the click reaction between azide-modified POSS (POSS-(N3 )8 ) and alkynyl-modified PPI (PPI-Alkynyl). The hybrid POSS-(PPI)8 was with predominated left-handed helical conformation and exhibited excellent ability in the enantioselective crystallization of racemic compounds. In the meantime, heteroarm star-shaped hybrid (PEG)4 -POSS-(PPI)4 was prepared by the click reaction of POSS-(N3 )8 with PPI-Alkynyl and alkynyl-modified poly (ethylene glycol) (PEG-Alkynyl). The hybrid (PEG)4 -POSS-(PPI)4 was amphiphilic, and it could self-assemble to form spherical micelles in aqueous solutions.
Assuntos
Micelas , Polímeros , Cristalização , Estereoisomerismo , ÁguaRESUMO
Programming the organization of semiconducting polymers to form well-defined nanoarchitectures is desirable for fabricating functional materials. In this work, semiconducting copolymers, poly(cholesterol allene)-b-poly(3-hexylthiophene) (PCA-b-P3HT) containing helical PCA and poly(alkoxy allene)-b-poly(3-hexylthiophene) (PAA-b-P3HT) containing achiral PAA segments, were prepared. Crystallization of P3HT and helicity of PCA drove PCA-b-P3HT self-assemble into spherical nanoparticles that gradually transformed into one-handed helical nanofibers. The chirality of PCA was transferred to the supramolecular architectures, induced high optical activity in P3HT. Interestingly, the chiral seed micelles of PCA-b-P3HT induced asymmetric copolymerization of achiral PAA-b-P3HT, which led to helical supramolecular block copolymers with defined helicity and controlled length. Remarkably, the supramolecular copolymers showed white-light emission and circularly polarized luminescence.
Assuntos
Micelas , Polímeros , Cristalização , Polimerização , Polímeros/químicaRESUMO
Cyclic polymers attract attention because of their endless structure and unique properties, which differ from the linear analogs. However, the synthesis of cyclic polymers is difficult and prohibits their functions and applications. In this study, we reported chiral cyclic PdII -catalysts that initiate a living ring-expansion polymerization of isocyanides, yielding a single-handed cyclic-helical poly(phenyl isocyanide), with predictable molecular weight (Mn ) and low dispersity (Mw /Mn ), in good yield. Using this method, cyclic bottlebrush polymers were prepared via the grafting-onto strategy. The cyclic topology was confirmed using various spectroscopic data and atomic force microscope observation. Moreover, the cyclic polymer brushes, comprising of a one-handed helical backbone, showed interesting photoluminescence and circularly-polarized luminescence.
RESUMO
Self-sorting plays a crucial role in living systems such as the selective assembly of DNA and specific folding of proteins. However, the self-sorting of artificial helical polymers such as biomacromolecules has rarely been achieved. In this work, single-handed helical poly(phenyl isocyanide)s bearing pyrene (Py) and naphthalene (Np) probes were prepared, which exhibited interesting self-sorting properties driven by both helicity and molecular weight (Mn ) in solution, solid state, gel, and on the gel surface as well. The polymers with the same helix sense and similar Mn can self-sort and assemble into well-defined two-dimensional smectic architectures and form stable gels in organic solvents. In contrast, mixed polymers with opposite handedness or different Mn were repulsive to each other and did not aggregate. Moreover, the gels of helical polymers with the same handedness and similar Mn can recognize themselves and adhere together to form a gel.
RESUMO
Inspired by the exquisite helices in Nature, fabrication of helical materials with controlled handedness has attracted considerable attention. Herein, we report on precis synthesis of single left- and right-handed helical polyisocyanides through living polymerization of achiral monomers using chiral palladium catalysts under helix-sense-selective manner. Mechanism study revealed that the yielded helices with opposite handedness showed different activity of the living chain end. The helix with unfavored handedness was self-terminated, while the one with favored handedness showed high activity and could undergo chain propagation to form a high molecular weight polymer with maintained single-handed helicity.
RESUMO
Accurate control of the layer number of orderly stacked 2D polymers has been an unsettled challenge in self-assembly. Herein we describe the fabrication of a bilayer 2D supramolecular organic framework from a monolayer 2D supramolecular organic framework in water by utilizing the cooperative coordination of a rod-like bipyridine ligands to zinc porphyrin subunits of the monolayer network. The monolayer supramolecular framework is prepared from the co-assembly of an octacationic zinc porphyrin monomer and cucurbit[8]uril (CB[8]) in water through CB[8]-encapsulation-promoted dimerization of 4-phenylpyridiunium subunits that the zinc porphyrin monomer bear. The bilayer 2D supramolecular organic framework exhibits structural regularity in both solution and the solid state, which is characterized by synchrotron small-angle X-ray scattering and high-resolution transmission electron microscopic techniques. Atomic force microscopic imaging confirms that the bilayer character of the 2D supramolecular organic framework can be realized selectively on the micrometer scale.
RESUMO
Controlling the self-assembly morphology of π-conjugated block copolymer is of great interesting. Herein, amphiphilic poly(3-hexylthiophene)-block-poly(phenyl isocyanide)s (P3HT-b-PPI) copolymers composed of π-conjugated P3HT and optically active helical PPI segments were readily prepared. Taking advantage of the crystallizable nature of P3HT and the chirality of the helical PPI segment, crystallization-driven asymmetric self-assembly (CDASA) of the block copolymers lead to the formation of single-handed helical nanofibers with controlled length, narrow dispersity, and well-defined helicity. During the self-assembly process, the chirality of helical PPI was transferred to the supramolecular assemblies, giving the helical assemblies large optical activity. The single-handed helical assemblies of the block copolymers exhibited interesting white-light emission and circularly polarized luminescence (CPL). The handedness and dissymmetric factor of the induced CPL can be finely tuned through the variation on the helicity and length of the helical nanofibers.
RESUMO
In this work, air-stable palladium(II) catalysts bearing bidentate phosphine ligands were designed and prepared, which could initiate fast and living polymerizations of various diazoacetate monomers under mild conditions. The polymerization afforded the desired polymers in high yields with controlled molecular weights ( Mns) and narrow molecular weight distributions ( Mw/ Mns). The Mns of the isolated polymers were linearly correlated to the initial feed ratios of monomer to catalyst, confirming the living/controlled manner of the polymerizations. The Mn also increased linearly with the monomer conversion, and all of the isolated polymers showed narrow Mw/ Mns. The polymerization was relatively fast and could be accomplished within several minutes. Such fast living polymerization method can be applied to a wide range of diazoacetate monomers in various organic solvents at room temperature in air. Taking advantage of the living nature, we facilely prepared a series of block copolymers through chain extension reactions. The amphiphilic block copolymers synthesized by this method exhibited interesting self-assembly properties. Moreover, polymerization of achiral bulky diazoacetate by Pd(II) catalysts bearing a chiral bidentate phosphine ligand leads to the formation of polymers with high optical activity due to the formation of the predominantly one-handed helix of the main chain. The helix sense of the polymers was determined by the chirality of the Pd(II) catalysts.
RESUMO
In this paper, the facile synthesis of hybrid Fe3 O4 magnetic nanoparticles carrying helical poly(phenyl isocyanide) (PPI) arms via both "grafting from" and "grafting onto" strategies is reported. First, alkyne-Pd(II) catalysts are anchored onto the surface of the Fe3 O4 magnetic nanoparticle, which promote the polymerization of enantiopure phenyl isocyanide, affording the expected hybrid magnetic nanoparticle with Fe3 O4 in core and helical PPI as arms. The nanoparticle also exhibits highly optical activity due to the excess of one-handed helicity of the PPI arms. Moreover, the hybrid magnetic nanoparticle can be alternatively synthesized via "grafting onto" strategy. A triethoxysilanyl-terminated single handed helical PPI bearing l-alanine ester pendants is prepared and grafted onto the surface of Fe3 O4 nanoparticle. The generated hybrid magnetic nanoparticles show both magnetic character and optical activity. Taking advantage of these properties, they can be used in enantioselective crystallization of racemic threonine. The enantiomeric excess (ee) of the induced crystals is up to 93%. Moreover, the nanoparticles can be facilely recovered and recycle used for at least four times in enantioselective crystallization without significantly loss of its enantioselectivity.