Hydrogen Isotope Effect Endows a Breakthrough in Photoluminescent Covalent Organic Frameworks.

Luminescent covalent organic frameworks (LCOFs) have emerged as indispensable candidates in various applications due to their greater tunable emitting properties and structural robustness compared to small molecule emitters. An unsolved issue in this area is developing highly luminescent LCOFs of which the nonradiative quenching pathways were suppressed as much as possible. Here, a robust aminal-linked COF (DD-COF) possessing perdeuterated light-emitting monomers was designed and synthesized. The solid-state photoluminescence quantum yield of the DD-COF reaches 81%, significantly outcompeting all state-of-the-art LCOFs reported so far. The exceptional luminescent efficiency is attributed to the inhibition of different pathways of nonradiative decay, especially from bond vibrations where only substitution by a heavier isotope with a lower zero-point vibration frequency works. Furthermore, the prepared deuterated COF not only boosts higher photostability under UV irradiation but also enables superior fluorescence sensing performance for iodine detection compared to nondeuterated COF.

LINC00355 promotes gastric carcinogenesis by scaffolding p300 to activate CDC42 transcription and enhancing HNRNPA2B1 to stabilize CDC42 mRNA dependent on m6A.

LINC00355 is involved in the tumorigenesis of several types of cancer. We verified that LINC00355 is upregulated in gastric cancer (GC) and contributes to GC cells' proliferation and metastasis. RNA sequencing (RNA-seq) and rescue assays suggested that LINC00355 controls gastric carcinogenesis by regulating the expression of cell division cycle 42 (CDC42) guanosine triphosphatase (GTPases), thereby activating their downstream pathways. Most previous studies have shown that LINC00355 acts as a ceRNA by sponging miRNAs to modulate downstream gene expression. Our group focus on epigenetic regulatory potential of LINC00355 in gene expression. Mechanistically, LINC00355 binds to p300 histone acetyltransferase, specifying the histone modification pattern on the CDC42 promoter to activate CDC42 transcription, thereby altering GC cell biology. In addition, HNRNPA2B1, which is upregulated by LINC00355, recognizes the N6-methyladenosine (m6A) sites of CDC42 and enhances the stability of CDC42 mRNA transcripts. Therefore, LINC00355 is mechanistically, functionally, and clinically oncogenic in GC cells.

Diluted PEDOT:PSS for high-performance organic light-emitting devices with thermally activated delayed fluorescence emitters.

Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is a widely used conductive polymer in organic light-emitting devices. However, its strong acidity and fluorescence quenching effect seriously affect the overall device performance. We report a cost-effective method to address the above concerns by diluting PEDOT:PSS with deionized water, which effectively reduced the film thickness and the acidity. Therefore, the fluorescence quenching occurring at the interface was alleviated. Using the modified PEDOT:PSS as the hole injection layer, the external quantum efficiency of the device could be effectively improved by a factor of 81%, reaching a considerably higher value of 23.5%, compared with the device consisting of the original PEDOT:PSS solution used as received.

PRMT5 Deficiency Enforces the Transcriptional and Epigenetic Programs of Klrg1+CD8+ Terminal Effector T Cells and Promotes Cancer Development.

Protein arginine methyltransferase 5 (PRMT5) participates in the symmetric dimethylation of arginine residues of proteins and contributes to a wide range of biological processes. However, how PRMT5 affects the transcriptional and epigenetic programs involved in the establishment and maintenance of T cell subset differentiation and roles in antitumor immunity is still incompletely understood. In this study, using single-cell RNA and chromatin immunoprecipitation sequencing, we found that mouse T cell-specific deletion of PRMT5 had greater effects on CD8+ than CD4+ T cell development, enforcing CD8+ T cell differentiation into Klrg1+ terminal effector cells. Mechanistically, T cell deficiency of PRMT5 activated Prdm1 by decreasing H4R3me2s and H3R8me2s deposition on its loci, which promoted the differentiation of Klrg1+CD8+ T cells. Furthermore, effector CD8+ T cells that transited to memory precursor cells were decreased in PRMT5-deficient T cells, thus causing dramatic CD8+ T cell death. In addition, in a mouse lung cancer cell line-transplanted tumor mouse model, the percentage of CD8+ T cells from T cell-specific deletion of PRMT5 mice was dramatically lost, but CD8+Foxp3+ and CD8+PDL1+ regulatory T cells were increased compared with the control group, thus accelerating tumor progression. We further verified these results in a mouse colon cancer cell line-transplanted tumor mouse model. Our study validated the importance of targeting PRMT5 in tumor treatment, because PRMT5 deficiency enforced Klrg1+ terminal CD8+ T cell development and eliminated antitumor activity.

Inkjet Printing of High-Color-Purity Blue Organic Light-Emitting Diodes with Host-Free Inks.

Inkjet printing technology offers a unique approach to producing direct-patterned pixels without fine metal masks for active matrix displays. Organic light-emitting diodes (OLEDs) consisting of thermally activated delayed fluorescence (TADF) emitters facilitate efficient light emission without heavy metals, such as platinum and iridium. Multi-resonance TADF molecules, characterized by their small full width at half maxima (FWHM), are highly suitable for the requirements of wide color-gamut displays. Herein, host-free TADF inks with a low concentration of 1 mg/mL were developed and inkjet-printed onto a seeding layer, concurrently serving as the hole-transporting layer. Attributed to the proof-of-concept of host-free inks printed on a mixed seeding layer, a maximum external quantum efficiency of 13.1% (improved by a factor of 21.8) was achieved in the inkjet-printed OLED, with a remarkably narrow FWHM of only 32 nm. Highly efficient energy transfer was facilitated by the effective dispersion of the sensitizer around the terminal emitters.

High-Efficiency Pure Blue Circularly Polarized Phosphorescence from Chiral N-Heterocyclic-Carbene-Stabilized Copper(I) Clusters.

Circularly polarized luminescence (CPL) materials have attracted considerable attention for their promising applications in encryption, chiral sensing, and three-dimensional (3D) displays. However, the preparation of high-efficiency, pure blue CPL materials remains challenging. In this study, we reported an enantiomeric pair of triangle copper(I) clusters (R/S-Cu3) rigidified by employing chiral N-heterocyclic carbene (NHC) ligands with two pyridine-functionalized wingtips. These chiral clusters emitted pure blue phosphorescence that overlapped with that of the commercial blue phosphor having Commission Internationale de l'Eclairage (CIE) chromaticity coordinates of (0.14, 0.10), and the films exhibited an unprecedented photoluminescence quantum yield (PLQY) of ∼70.0%. Additionally, the solutions showed very bright circularly polarized phosphorescence (CPP) with a dissymmetry factor of ±2.1 × 10-3. The excellent solubility and photostability endowed these pure-blue-emitting chiral clusters with promising applications as pure blue CPP inks for 3D printing white objects, such as precise-atomic-enlarged models of metal clusters and a lovely white stereoscopic "rabbit". The intricate mechanism underlying blue phosphorescence in this small cluster and across various states is elucidated through a comprehensive approach that integrates thorough analysis of luminescence properties, controlled experiments, and theoretical calculations. For the first time, we propose that the dominant high-energy emission center is constituted by delocalized hybrid orbitals over multiple atomic centers, encompassing both the metal and the coordinated atoms. This challenges stereotypical assumptions that the cluster center solely supports low-energy emissions. This work expands the currently limited range of CPP functional materials and provides a new direction for CPP applications involving NHC-stabilized metal clusters.

Reblooming of the cis-Bis(2-phenylpyridine) Platinum(II) Complex: Synthesis Updating, Aggregation-Induced Emission, Electroluminescence, and Cell Imaging.

Studies on the syntheses, photophysical properties, and applications of cis-bis(2-phenylpyridine) platinum(II) complex (Pt(ppy)2) family are of great importance, but very limited progress has been achieved to date. Herein, a one-pot method was established for the syntheses of Pt(ppy)2-type complexes Pt-ppy and Pt-tBu. These two compounds were nonemissive in dilute solutions. However, they produced intense red and deep-red phosphorescence in the aggregation and film states, with lifetimes and quantum yields up to 1.92 µs and 70%, respectively, exhibiting unique aggregation-induced emission (AIE) characteristics. According to the experimental and theoretical studies, molecular configuration transformation (MCT) in the excited state may occur because of the d-d transition from the Pt center, causing nonradiative transitions in the solution. Nevertheless, the MCT would be largely restricted by the intermolecular interactions or rigid matrix, thereby enabling efficient phosphorescence in the aggregation state and in the PMMA films. Consequently, the AIE characteristics of Pt-ppy and Pt-tBu probably result from the restriction of molecular configuration transformation (RMCT). Due to the π-π and/or weak Pt-Pt interactions and the concentration-dependent emission characteristics, they emit deep-red and NIR emissions generated by excimer and/or MMLCT emitting species. Inspired by their AIE features, electroluminescence and cell imaging applications are explored. To the best of our knowledge, this is the first comprehensive study on the synthesis optimization, photophysical properties, AIE characteristics, and applications of the Pt(ppy)2-type complexes, which may rebloom the research studies on this type of Pt(II) complex family and provide valuable insights on the development of phosphorescent AIE metal-organic complexes.

One-Pot Synthesis of Acetylacetonate-Based Isomeric Phosphorescent Cyclometalated Iridium(III) Complexes via Random Cyclometalation: A Strategy for Excited-State Manipulation.

The excited-state manipulation of the phosphorescent iridium(III) complexes plays a vital role in their photofunctional applications. The development of the molecular design strategy promotes the creative findings of novel iridium(III) complexes. The current molecular design strategies for iridium(III) complexes mainly depend on the selective cyclometalation of the ligands with the iridium(III) ion, which is governed by the steric hindrance of the ligand during the cyclometalation. Herein, a new molecular design strategy (i.e., random cyclometalation strategy) is proposed for the effective excited-state manipulation of phosphorescent cyclometalated iridium(III) complexes. Two series of new and separable methoxyl-functionalized isomeric iridium(III) complexes are accessed by a one-pot synthesis via random cyclometalation, resulting in a dramatic tuning of the phosphorescence peak wavelength (∼57 nm) and electrochemical properties attributed to the high sensitivity of their excited states to the position of the methoxyl group. These iridium(III) complexes show intense phosphorescence ranging from the yellow (567 nm) to the deep-red (634 nm) color with high photoluminescence quantum yields of up to 0.99. Two deep-red emissive iridium(III) complexes with short decay lifetimes are further utilized as triplet emitters to afford efficient solution-processed electroluminescence with reduced efficiency roll-offs.

Solution-Processed Large-Area Organic/Inorganic Hybrid Antireflective Films for Perovskite Solar Cell.

In recent years, organic/inorganic hybrid materials have attracted much attention in the field of multilayer antireflection films because of their excellent optical properties. In this paper, the organic/inorganic nanocomposite was prepared from polyvinyl alcohol (PVA) and titanium (IV) isopropoxide (TTIP). The hybrid material has a wide, tunable window of refractive index, i.e., 1.65-1.95, at a wavelength of 550 nm. The atomic force microscope (AFM) results of the hybrid films show the lowest root-mean-square surface roughness of 2.7 Å and a low haze of 0.23%, indicating that the films have good potential for optical applications. The double-sided antireflection films (10 × 10 cm2) with one side of hybrid nanocomposite/cellulose acetate and the other side of hybrid nanocomposite /polymethyl methacrylate (PMMA) achieved high transmittances of 98% and 99.3%, respectively. After 240 days of aging testing, the hybrid solution and the antireflective film remained stable with almost no attenuation. Furthermore, the application of the antireflection films in perovskite solar cell modules increased the power conversion efficiency from 16.57% to 17.25%.

Cluster Light-Emitting Diodes Containing Copper Iodine Cube with 100 % Exciton Utilization Using Host-Cluster Synergy.

Clusters combine the advantages of organic molecules and inorganic nanomaterials, which are promising alternatives for optoelectronic applications. Nonetheless, recently emerged cluster light-emitting diodes require further excited state optimization of cluster emitters, especially to reduce population of the cluster-centered triplet quenching state (3 CC). Here we report that redox-active ligands enhance reverse intersystem crossing (RISC) of Cu4 I4 cluster for triplet-to-singlet conversion, and thermally activated delayed fluorescence (TADF) host can provide an external RISC channel. It indicates that the complementarity between TADF host and cluster in RISC transitions gives rise to 100 % triplet conversion efficiency and complete singlet exciton convergence, rendering 100-fold increased singlet radiation rate constant and tenfold decreased triplet non-radiation rate constant. We achieve a photoluminescence quantum yield of 99 % and a record external quantum efficiency of 29.4 %.

Topological Design of Highly Anisotropic Aligned Hole Transporting Molecular Bottlebrushes for Solution-Processed OLEDs.

Polyvinyl polymers bearing pendant hole transport functionalities have been extensively explored for solution-processed hole transport layer (HTL) technologies, yet there are only rare examples of high anisotropic packing of the HT moieties of these polymers into substrate-parallel orientations within HTL films. For small molecules, substrate-parallel alignment of HT moieties is a well-established approach to improve overall device performance. To address the longstanding challenge of extension from vapor-deposited small molecules to solution-processable polymer systems, a fundamental chemistry tactic is reported here, involving the positioning of HT side chains within macromolecular frameworks by the construction of HT polymers having bottlebrush topologies. Applying state-of-the-art polymer synthetic techniques, various functional subunits, including triphenylamine (TPA) for hole transport and adhesion to the substrate, and perfluoro alkyl-substituted benzyloxy styrene for migration to the air interface, were organized with exquisite control over the composition and placement throughout the bottlebrush topology. Upon assembling the HT bottlebrush (HTB) polymers into monolayered HTL films on various substrates through spin-casting and thermal annealing, the backbones of HTBs were vertically aligned while the grafts with pendant TPAs were extended parallel to the substrate. The overall design realized high TPA π-stacking along the out-of-plane direction of the substrate in the HTLs, which doubled the efficiency of organic light-emitting diodes compared with linear poly(vinyl triphenylamine)s.

Regioselective Syntheses of Imidazo[4,5-b]pyrazin-2-ylidene-Based Chelates and Blue Emissive Iridium(III) Phosphors for Solution-Processed OLEDs.

Six homoleptic Ir(III) complexes bearing imidazo[4,5-b]pyrazin-2-ylidene chelates were successfully designed and synthesized. Narrowband blue emission (λmax = 466-485 nm) and broadened green emission (λmax = 518-532 nm) in degassed toluene solution with high photoluminescent quantum yields in the range of 75-81 and 45-48% were observed for f-timpz, t2impz, and t2empz as well as m-timpz, t2impz, and t2empz, respectively. In addition, the tert-butylphenyl cyclometalate is more electron donating than N-phenyl cyclometalate and, hence, all tert-butylphenyl-substituted derivatives, that is, m- and f-t2impz and m- and f-t2empz, give more red-shifted emission in comparison to that of m- and f-timpz. Moreover, solution-processed OLED with f-t2empz (20 wt %) as the dopant gave electrophosphorescence at 474 nm with maximum external quantum efficiency (max. EQE) of 5.1%, while hyper-OLED with assistant sensitizer f-t2empz (10 wt %) and the multi-resonance thermally activated delayed fluorescence emitter BCzBN (0.5 wt %) afforded narrowband emission centered at 485 nm and max. EQE up to 17.4%, confirming the high potential of this class of Ir(III) metal phosphors.

Tetradentate Pt(II) Complexes with Peripheral Hindrances for Highly Efficient Solution-Processed Blue Phosphorescent OLEDs.

Two tetradentate Pt(II) complexes with peripheral bulky-group hindrances [Pt(pzpyOczpy-B1) and Pt(pzpyOczpy-B2)] were synthesized and fully investigated for their structural and blue phosphorescent properties. Both X-ray crystallography and computational simulation revealed that bulky substituents incorporated into the C-pyrazolyl and C-pyridinyl positions lie out of the cyclometallated plane, thus alleviating the intramolecular distortions as well as reducing the intermolecular interaction in the solid state. In dichloromethane, their emission peaks at 460 nm with a narrow full width at half-maximum (FWHM) of less than 50 nm, and the photoluminescent quantum yields are over 95% with short decay lifetimes (<5 µs). Solution-processed blue devices are fabricated based on the two complexes. Device A based on Pt(pzpyOczpy-B1) shows excellent electroluminescent performances with the maximum current efficiency, power efficiency, and external quantum efficiency of 47.0 cd/A, 24.6 lm/W, and 22.9%, respectively. The understanding on inert peripheral hindrances provides an effective approach to designing Pt(II) complexes for high-quality blue phosphorescent emitters.

Numerical Simulation of S-Shaped Current-Voltage Curves Induced by Electron Traps in Inverted Organic Photovoltaics.

Organic photovoltaics (OPVs) differ from their inorganic counterparts because of inevitable electronic disorders and structural heterogeneity. Charge carrier traps are inevitable in organic semiconductors. A common failure mechanism of OPVs is the development of an S-shaped current density-voltage characteristic (J-V curve). Herein, we focus on investigating the underlying physical mechanism of S-shaped deformation of J-V curve of the inverted organic photovoltaic devices with bulk-heterojunction, proven by experiments with the n-doped electron extraction layer and numerical simulations assuming electron traps (0.1 eV deeper) in the electron extraction layer. The numerical simulations are quite consistent with the experimental results. In addition, the open circuit voltage induced by S-kink is exemplified to be enhanced after removing the electron traps in the interlayer by introducing a dopant of cesium carbonate.

Tetracoordinate Boron-Based Multifunctional Chiral Thermally Activated Delayed Fluorescence Emitters.

Purely organic emitters have shown great potential but still suffer from low efficiency in near-infrared organic light-emitting diodes (NIR-OLEDs) due to the intensive non-radiative recombination. In this contribution, two pairs of thermally activated delayed fluorescence (TADF) enantiomers (R/S-DOBP and R/S-HDOBP) with tetracoordinate boron geometries were designed and synthesized. The TADF emitters simultaneously showed aggregation-induced emission, circularly polarized luminescence, high-contrast mechanochromism, and piezochromism behaviors. More importantly, R/S-DOBP and R/S-HDOBP revealed high photoluminescence quantum yields and efficient reverse intersystem crossing in neat films. The nondoped solution-processed OLEDs based on these unique emitters revealed the NIR emission (peaking at 716 nm) with a maximum external quantum efficiency of 1.9 % and high exciton utilization efficiency of 86 %, which represent one of the best solution-processed nondoped NIR-OLEDs.

Solution-processed AIEgen NIR OLEDs with EQE Approaching 15 .

Organic near-infrared (NIR) luminogens have attracted intensive attention considering their vast potential applications in areas like bioimaging, organic light-emitting diodes (OLEDs) and night-vision telecommunication. However, organic NIR luminogens with high solid quantum efficiencies are scarce, limiting their applications. Here, we reported an electron-deficient acceptor, BSM, based on dithiafulvalene and benzothiadiazole, which could work as a strong acceptor to produce highly efficient NIR emitters with aggregation-induced emission (AIE) property. One of the AIEgens, TBSMCN emitted at 820 nm with a solid quantum yield of 10.7 %. When applied to solution-processed OLEDs, an outstanding external quantum efficiency (EQE) of 9.4 % was achieved with a peak wavelength at 728 nm. Moreover, its non-doped device could achieve an extraordinary EQE of 2.2 % peaking at 804 nm. In the further optimized configuration, when an extra sensitizer was added to harvest triplet excitons, the EQE unprecedentedly soared up to 14.3 % with a peak wavelength of 750 nm.

Post-synthesis from Lewis acid-base interaction: an alternative way to generate light and harvest triplet excitons.

The changes in absorption and emission of fluorescent materials with the introduction of Lewis acids have been frequently observed due to either physical or chemical interactions. In this mini-review, we elaborate how Lewis acids adjust the optical properties and the bandgap of luminescent materials by simple coordination reactions. It is common that fluorescent materials containing Lewis basic nitrogen heterocycles are more likely to provide the feasible band gap modulation. The essence of such phenomenon originates from Lewis acid-base coordination and adducts, which highly depends on the electron-accepting property of the Lewis acids. This intermolecular mechanism, considered as post-synthesis of new luminescent compounds offers promising applications in sensing and electroluminescence by manipulating the frontier molecular orbital energy levels of organic conjugated materials, simply based on Lewis acid-base chemistry.

Gastric cancer-secreted exosomal X26nt increases angiogenesis and vascular permeability by targeting VE-cadherin.

Angiogenesis is closely associated with tumorigenesis, invasion, and metastasis by providing oxygen and nutrients. Recently, increasing evidence indicates that cancer-derived exosomes which contain proteins, coding, and noncoding RNAs (ncRNAs) were shown to have proangiogenic function in cancer. A 26-nt-long ncRNA (X26nt) is generated in the process of inositol-requiring enzyme 1 alpha (IRE1α)-induced unspliced XBP1 splicing. However, the role of X26nt in the angiogenesis of gastric cancer (GC) remains largely unknown. In the present study, we found that X26nt was significantly elevated in GC and GC exosomes. Then, we verified that X26nt could be delivered into human umbilical vein endothelial cells (HUVECs) via GC cell exosomes and promote the proliferation, migration, and tube formation of HUVECs. We revealed that exosomal X26nt decreased vascular endothelial cadherin (VE-cadherin) by directly combining the 3'UTR of VE-cadherin mRNA in HUVECs, thereby increasing vascular permeability. We further demonstrated that X26nt accelerates the tumor growth and angiogenesis in a mouse subcutaneous tumor model. Our findings investigate a unique intercellular communication mediated by cancer-derived exosomes and reveal a novel mechanism of exosomal X26nt in the regulation of tumor vasculature.

BACH2 regulates the function of human CD4+ CD45RA- Foxp3l ° cytokine-secreting T cells and promotes B-cell response in systemic lupus erythematosus.

Although CD4+ CD45RA- Foxp3l ° cytokine-secreting T cells (Fr.III cells) have been reported to be increased in systemic lupus erythematosus (SLE), their function and effects on response of B cells are still unclear. Here, we dissect how BACH2 regulates Fr.III cells function and promotes B-cell response in active SLE patients. We measured cytokines and BACH2 expression, and found that Fr.III cells from SLE patients produce much more inflammatory cytokines and were more able to promote B- cell proliferation, IgG, IgA, and TNF-α production than controls in a co-culture system. Fr.III cells expressed high levels of ICOS and CD154, but a low level of Tfr and BACH2, BACH2 expression was negatively correlated with SLE Disease Activity Index. Overexpressed of BACH2 in Fr.III cells, decreased cytokines expression and reduced B-cell response. Furthermore, we identified a reduction of H3K27ac level binding at the BACH2 locus in the SLE Fr.III cells and SLE serum stimulation decreased H3K27ac binding at the BACH2 locus, which could be restored using trichostatin A (TSA). In conclusion, BACH2 was associated with SLE disease activity, regulated the function of Fr.III cells, and promoted B-cells response. Targeting BACH2 may be a new immune intervention therapy of SLE.

Perovskite Light-Emitting Devices with Doped Hole Transporting Layer.

Perovskite quantum dots (PQDs) have drawn global attention in recent years and have been used in a range of semiconductor devices, especially for light-emitting diodes (LEDs). However, because of the nature of low-conductive ligands of PQDs and surface and bulk defects in the devices, charge injection and transport should be carefully managed in order to maximize the electroluminescent performances. In this study, we employed three p-dopants, i.e., 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4-TCNQ), 1,3,4,5,7,8-hexafluoro-11,11,12,12-tetracyanonaphtho-2,6-quinodimethane (F6-TCNNQ), and 11,11,12,12-tetracyanonaphtho-2,6-quinodimethane (TCNH14), respectively doped into the commonly used hole transporting layer (HTL) poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine] (PTAA). Compared with the devices with the neat PTAA, those with the doped PTAA as the HTLs achieved the improved electroluminescent performances. In particular, the device with the strong oxidant F4-TCNQ exhibited an improvement factor of 27% in the peak external quantum efficiency compared with the control device with the neat PTAA. The capacitance and transient electroluminescent measurements were carried out to identify the imperceptible interactions in the doped HTL and at the interface between the HTL and PQDs.