RESUMO
A compact millimeter-wave on-chip sensor for dielectric detection is presented using gallium arsenide technology based on spoof surface plasmon polaritons (SSPPs). The proposed structure is developed from traditional half-mode substrate integrated waveguide (HMSIW) and its dispersion characteristics is analyzed through electromagnetic simulations. Consequently, the operating frequency and bandwidth of the on-chip sensor can be easily adjusted, which provides more flexibility for the practical application of the sensor. The linear sensing for relative dielectric constant of the film materials is acquired, with thickness-insensitive property. Moreover, the low coupling to the nearby components can be achieved due to the strong field confinement characteristics of the SSPPs, which is of great significance in the application scenarios of on-chip integrated circuits for the suppression of electromagnetic interference.
RESUMO
In this paper, a dual-band terahertz absorber based on metamaterial structure is designed, fabricated, and measured. The metal periodic array is located on the upper surface of a silicon wafer with a metal ground plane, while the metamaterial structure is created utilizing a square metal ring with four T-shaped metal strips loaded inside of the ring. Two absorption peaks are realized at 0.715 and 1.013 THz with high Q-factors of 152.1 and 98.3, respectively, under normal TE and TM polarized incidence. A prototype of the proposed metamaterial absorber is fabricated by electron beam lithography (EBL) and electron beam evaporation (EBE) technology. Furthermore, a terahertz time-domain spectroscopy (TDS) measurement system is employed to test the absorber sample, with good measurement results obtained. This work provides a new option for the design of multi-band terahertz metamaterial absorbers.
RESUMO
We numerically demonstrate a tunable dual-band terahertz metamaterial absorber (MA) with near-unity absorption using single-layer square graphene ring structure with T-shaped graphene strips. By periodically loading four T-shaped graphene strips to the square graphene ring periodic array without additionally increasing the size of MA device, the pre-existing resonant frequency will have a red shift and simultaneously a new resonance will be generated at higher frequency for achieving a dual-band MA. The two absorption peaks can be tuned to the resonant frequencies of interest by varying the parameters of the square graphene ring and T-shaped graphene strips. The operating frequency of the absorption spectrum can be also manipulated by adjusting the chemical potential of graphene, without changing their geometric parameters. Additionally, numerical results show that the proposed MA possesses polarization-independent and incident-angle-insensitive properties. To further extend the proposed structure's application with more absorption peaks, a tri-band MA is investigated through adding four more T-shaped graphene strips based on the dual-band absorber configuration. Therefore, our research work will be a good candidate for the design of various graphene-based tunable multi-band absorbers at different frequency regions with potential applications in optoelectronic devices and systems.
RESUMO
Terahertz (THz) broadband spoof surface plasmon polaritons (SSPPs) using new structure of ultra-compact split-ring grooves are proposed. The high-order mode propagation is highly concentrated around the proposed structure with lower radiation loss implying improved operating bandwidth. More importantly, a size reduction of 83.5% can be realized as compared to the traditional grounded SSPP structure with the same high-order asymptotic frequency. To further verify the proposed idea, a similar structure in microwave regime is designed and measured, where the excitation is easily achieved by directly connecting the microstrip line to the proposed SSPP waveguide. The gradient transition section, such as flaring ground, can be avoided, which decreases the waveguide's longitudinal and transversal lengths and simplifies the design procedure. The measured results of the microwave prototype illustrate that it has good lowpass filtering performance, in which the reflection coefficient is better than -10 dB up to 13 GHz, with the smallest and worst insertion losses of 0.5 dB and 4.5 dB, respectively. To the best of the authors' knowledge, this work presents THz high-order broadband SSPP propagation for the first time, having significant potential for plasmonic integrated circuits application at microwave/THz frequencies.
RESUMO
Two-dimensional materials (2DMs) such as graphene and black phosphorus (BP) have aroused considerable attentions in the past few years. Engineering and enhancing their light-matter interaction is possible due to their support for localized surface plasmon resonances in the infrared regime. In this paper, we have proposed an infrared broadband absorber consisting of multilayer graphene-BP nanoparticles sandwiched between dielectric layers. Benefiting from the properties of graphene and BP, the absorber exhibits both perfect broadband responses and strong anisotropy beyond individual graphene and BP layers. The absorber is tunable with the variation of geometric parameters as well as the doping levels of graphene and BP. The physical insight is revealed by electric field distributions. Furthermore, the angular robustness for incident wave is investigated. The proposed anisotropic omnidirectional broadband absorber may have promising potential applications in various biosensing, communication and imaging systems.
RESUMO
We numerically demonstrate a tunable broadband terahertz absorber with near-unity absorption by using multilayer graphene ribbons sandwiched in a plasmonic integrated structure. By stacking slightly different widths of graphene ribbons in a sandwiched configuration, the absorption bandwidth can be increased because of the different resonant modes closely positioned together. The absorption spectrum's center frequency can be manipulated by varying the graphene's chemical potential, which provides a flexible way to design and optimize absorption property after fabrication. Furthermore, the structure can tolerate a wide range of incident angles, while the improved structure with graphene nanoparticles also shows polarization-independent feature. In this routine, stacking more graphene ribbons or particles with well-designed dimensions can further increase the bandwidth, as long as the metamaterial dimension satisfies the sub-wavelength condition. Therefore, our research provides an important theoretical guide for designing various graphene-based tunable broadband absorbers at terahertz, infrared, and microwave frequencies. This may have promising applications in imaging, sensing, and novel optoelectronic devices.
RESUMO
Terahertz (THz) waves have garnered significant interest across various fields, particularly in high-sensitivity sensing applications. Metamaterials can be employed in THz sensors, specifically for refractive index sensing and pesticide detection due to their high-sensitivity characteristics. In this Article, a dual-band flexible THz metamaterial sensor based on polyimide is proposed for refractive index and pesticide sensing, which is fabricated using ultraviolet (UV) lithography technology and measured by a THz time-domain spectroscope (TDS) system. The resonant frequencies of the sensor are at 0.37 and 1.13 THz, with transmission rates of 2.9% and 0.3%, respectively. With an analyte layer attached to the sensor's surface, the sensitivity of refractive index sensing can be calculated as 0.09 and 0.28 THz/RIU (refractive index unit) at the two resonant frequencies. In order to validate the exceptional pesticide sensing performance of the sensor, chlorpyrifos-methyl acetone solutions with various concentrations are added on it. Furthermore, a monolayer of graphene is coated on the sensor's surface, which is proved capable of improving pesticide sensing sensitivity at low concentrations due to strong π-π stacking interactions with π-electrons in chlorpyrifos-methyl solutions. Therefore, the graphene-coated sensor can be utilized in detecting pesticide solutions with low concentrations, and the sensor without graphene is preferred for high concentration detection. This work provides a novel option for the THz metamaterial sensor with high sensitivity covering a wide pesticide concentration range.
RESUMO
In this paper, a dual-band metamaterial absorber in the terahertz frequencies is proposed and its refractive index sensing characteristics is analyzed. The metamaterial structure is designed using a square metal ring with four T-shaped strips loaded outside of the ring, where the metal periodic array is on top of a silicon wafer backed with a metal ground plane. The resonant frequencies of the absorber are at 0.89 and 1.36 THz, whose absorption rates are both over 99% under normal TE and TM polarized incidences. The full widths at half maximum of them are 4.4 and 11.2 GHz, respectively, resulting in high quality factors (Q-factors) for these two frequency bands. The absorption rate of the absorber remains stable as the incident and polarized angles are changed. Several proposed metamaterial absorbers are experimentally fabricated and electron beam lithography (EBL) technology is employed. Good measurement results of the dual-band absorption performance are obtained using a terahertz time-domain spectroscopy system based on photoconductive antennas. Furthermore, the metamaterial absorber also shows sensing properties for analytes with different refractive indices or thicknesses. This work provides a new choice for the design of high-Q dual-band terahertz metamaterial absorbers and their application to refractive index sensing.
RESUMO
In order to understand the growth dynamics of Larimichthys polyactis in spring and autumn along the coast of Zhejiang Province, we used the survey data of bottom trawlers in spring (April) and autumn (November) from 2014 to 2019 along the coast of Zhejiang Province to examine the heterogeneity of L. polyactis growth by constructing a generalized linear model (GLM) and nine linear mixed effect models (LMEM). The results showed that body length of L. polyactis ranged from 15 mm to 210 mm, with an average of 124.12 mm. The dominant body length group ranged from 110 mm to 140 mm. The body weight ranged from 0.04 g to 156.2 g, with an average of 33.28 g. The dominant body weight group ranged from 30 to 50 g. According to the AIC minimum criterion, the LMEM model with the random effects of seasons and water zones on growth parameters a and b was the best. The results of cross validation also showed that the prediction of this model was the best. In the optimal model, the fixed value of growth parameter a was 0.61×10-4, which ranged in (0.32-1.91)×10-4 after adding season and water random effect. The fixed value of parameter b was 2.73, and ranged from 2.49 to 2.86 after adding the random effects of season and water area, indicating that small yellow croaker was under negative allometric growth. Season and water zone had significant effects on the relationship between body length and body weight of small yellow croaker. From a seasonal perspective, the growth rate of small yellow croaker in spring was higher than that in autumn. From water zone perspective, the closer the offshore distance, the faster the growth rate of small yellow croaker.
Assuntos
Perciformes , Animais , Peso Corporal , China , Modelos Lineares , Estações do Ano , ÁguaRESUMO
A corrugated disk resonator with eight grooves is proposed for wideband bandpass filter (BPF) design. Due to the spoof localized surface plasmons resonances of the corrugated metallic structure, the dipole, quadrupole, hexapole modes, and a fundamental mode excited by the introduced short-circuited via holes are employed to realize four transmission poles (TPs) in the passband. The theoretical analysis is described by the electric field and current distributions on the resonator. The resonant frequencies can be tuned easily by the parameters of the structure, which can be used to adjust the center frequency and bandwidth of the BPF freely. Furthermore, two resonators are cascaded to obtain eight TPs to improve the selectivity performance. Finally, three fabricated filters demonstrate the design method.
RESUMO
The complete mitochondrial genome (mitogenome) of animals can provide useful information for evolutionary and phylogenetic analyses. The mitogenome of the genus Exhippolysmata (i.e., Exhippolysmata ensirostris) was sequenced and annotated for the first time, its phylogenetic relationship with selected members from the infraorder Caridea was investigated. The 16,350 bp mitogenome contains the entire set of 37 common genes. The mitogenome composition was highly A + T biased at 64.43% with positive AT skew (0.009) and negative GC skew (- 0.199). All tRNA genes in the E. ensirostris mitogenome had a typical cloverleaf secondary structure, except for trnS1 (AGN), which appeared to lack the dihydrouridine arm. The gene order in the E. ensirostris mitogenome was rearranged compared with those of ancestral decapod taxa, the gene order of trnL2-cox2 changed to cox2-trnL2. The tandem duplication-random loss model is the most likely mechanism for the observed gene rearrangement of E. ensirostris. The ML and BI phylogenetic analyses place all Caridea species into one group with strong bootstrap support. The family Lysmatidae is most closely related to Alpheidae and Palaemonidae. These results will help to better understand the gene rearrangements and evolutionary position of E. ensirostris and lay a foundation for further phylogenetic studies of Caridea.
Assuntos
Decápodes , Rearranjo Gênico , Genoma Mitocondrial , Filogenia , Animais , Aberrações Cromossômicas , Ordem dos GenesRESUMO
We investigated population structure, resource density changes of Larimichthys polyactis and its relationship with environmental factors in spring, based on the survey data of bottom trawl in adjacent sea areas of Zhoushan fishery spawning ground protection area from 2014 to 2019. The results showed that the relationship between body length and body weight of Larimichthys polyactis was W=0.44×10-4×L2.78, and parameter b was less than 3, which indicated that L. polyactis had negative allometric growth in recent years. There was a negative correlation between fullness and body length, with body becoming slender. From 2014 to 2019, body length and weight of L. polyactis were the highest in 2014 and the lowest in 2019. Since 2014, population size of L. polyactis in Zhoushan fishery spawning ground protection area and adjacent sea area had gradually decreased, indicating that the miniaturization of L. polyactis had not altered in recent years. From the perspective of the annual change of resource density, resource density of L. polyactis was higher than that before the establishment of the reserve, indicating that the management and protection of the reserve area played a protective role in the recovery of L. polyactis resources. The fitting results of GAM model showed that water depth and bottom water temperature were the environmental factors closely related to the density distribution of L. polyactis resources. With increasing water depth, the resources showed a fluctuating upward trend and were the highest near the water depth of 60 m. In the range of 12-16 â water temperature, the resources increased with the increases of bottom water temperature. When water temperature was above 16 â, resources decreased with the increases of bottom water temperature.
Assuntos
Pesqueiros , Perciformes , Animais , China , Estações do Ano , TemperaturaRESUMO
To understand the status and dynamics of macrozoobenthos community in Sanmen Bay, we collected benthos samples by Agassiz trawl in November 2015, and February, May and August in 2016. The results showed that: 1) A total of 119 macrozoobenthos species were recorded, with main groups of fishes, crustaceans and molluscs, accounting for 79% of the total number of species. 2) The dominant species of macrozoobenthos throughout the year were Leptochela gracilis, Hyperacanthomysis longirostris and Amblychaeturichthys hexanema. The identity of dominant species changed significantly in different seasons. 3) The annual average biomass and density were 0.025 g·m-2 and 0.07 ind·m-2, respectively. 4) The Shannon's diversity index of macrozoobenthos in Sanmen Bay varied from 2.21 to 3.18, the Margalef's species richness index varied from 3.25 to 3.78, and the Pielou's evenness index varied from 0.53 to 0.79. Results from abundance-biomass curve analysis showed that the community was moderately disturbed in spring and winter, and slightly disturbed in summer and autumn. Results from Canonical correspondence analysis showed that water depth, temperature, salinity, and pH were the most important environmental factors affecting macrozoobenthos community.
Assuntos
Baías , Moluscos , Animais , Biodiversidade , China , Ecossistema , Peixes , Estações do AnoRESUMO
The index of relative importance (IRI), niche breadth, and niche overlap (Qik) of nekton species were calculated using data collected from four fishery resource surveys from May 2016 to February 2017 in Yueqing Bay, Zhejiang Province. The results showed that there were 27 major nekton species (IRIï¼100) with higher turnover rates across different seasons, while their niche breadth values differed greatly and showed significant positive correlation with IRI. The niche overlaps of nekton were generally low, with the highest overlap value in autumn and the lowest in spring. The total amount of species pairs with niche overlap over 0.6 (Qikï¼0.6) were 14 in the autumn and five in the spring, which represented 15.4% and 7.6% of the total pairs, respectively. Results from the redundancy analysis suggested that the distribution of main nekton species were mainly affected by temperature, salinity and turbidity, which cause ecological differentiation of nekton species.
Assuntos
Baías , Ecossistema , China , Pesqueiros , Estações do AnoRESUMO
We numerically propose a dual-band absorber in the infrared region based on periodic elliptical graphene-black phosphorus (BP) pairs. The proposed absorber exhibits near-unity anisotropic absorption for both resonances due to the combination of graphene and BP. Each of the resonances is independently tunable via adjusting the geometric parameters. Besides, doping levels of graphene and BP can also tune resonant properties effectively. By analyzing the electric field distributions, surface plasmon resonances are observed in the graphene-BP ellipses, contributing to the strong and anisotropic plasmonic response. Moreover, the robustness for incident angles and polarization sensitivity are also illustrated.
RESUMO
Larimichthys polyactis (small yellow croaker) is a commercially important marine benthic fish, and is the main catching target of fisheries in China, Japan and Korea. Researches across different fields have progressed the understanding of this species; however, no genomics studies of this fish have been reported so far. In this study, we performed de novo transcriptome sequencing of eight cDNA libraries from brain, gill, heart, intestine, liver, muscle, ovary, and testis tissues of L. polyactis. A total of 182,227,948 paired-end reads (>200bp) were generated, from which 134,439 transcripts were assembled. These transcripts yielded a total of 93,990 non-redundant transcripts (unigenes) that were assigned functional annotations based on BlastX searches (E-value<1×10-5) against the following databases: NCBI NR, Swiss-Prot, TrEMBL, CDD, Pfam, and COG. In addition, 12,539 simple sequence repeats (SSRs) were identified. Our study provides a valuable resource of L. polyactis transcriptomic data that are expected to be useful for gene expression and functional studies of L. polyactis.