Hydrosilane/Organoiodine Coupling-Enabled Studies of Organosilane Physical Properties.

ConspectusThis Account summarizes recent developments in metal-mediated coupling reactions between hydrosilanes and aryl iodides in the presence of Pd(P(t-Bu)3)2 and base. Alkylated organosilanes are obtained when Pt(P(t-Bu)3)2 and a base are employed in reactions between hydrosilanes and aliphatic iodides. These transformations show unusual reactivity compared to the typical behavior of hydrosilanes toward organoiodides in the presence of PdCl2 or PtCl2, and they proceed in high yields under mild conditions. In addition, the reaction demonstrates (1) high functional group tolerances, (2) stepwise introduction of substituents onto silicon atoms from secondary silanes, and (3) transformation without cleavage of weak Si-Si σ bonds in the molecules.This transformation can serve as a powerful tool for the synthesis of functional organosilicon compounds. The advantage is the flexibility in the molecular structure due to the large size compared to carbon. These compounds have relatively sparse packing in the crystalline state, unlike π-conjugated molecules, which induce dense π-π interactions. Consequently, they have significantly different physical properties in solution and in the solid state. Among them, aromatic disilanes and oligosilanes are important substance groups, because the conjugated chain within these molecules expands due to σ-π interaction between Si-Si σ bond and π orbital of aromatic ring. σ-π Conjugation is most efficient when the dihedral angle between the aromatic ring and the Si-Si bond is 90°, resulting in the overlap of σ orbital and π orbital. The conformational structure, packing, and physical properties of these compounds can change in tandem in response to external stimuli through a crystal phase transition. The interlocking changes in structure and physical properties are reversible, easily returning to their original state with different external stimulus. This account covers several important aspects, including solid-state emission with high fluorescence intensity, aggregation-induced emission (AIE) in water-THF system, mechanochromic fluorescence, organic light emitting diode (OLED), second harmonic generation (SHG) and thermosalient phenomena.This reaction can synthesize optically active tertiary and quaternary silanes by the enantioselective arylation of secondary silanes with aryl iodides using a palladium catalyst modified with a TADDOL-derived amide phosphoric acid ester as a chiral ligand. These optically active compounds can be used as useful circularly polarized luminescence (CPL) materials due to their strong luminescence intensity (Φ) and luminescence dissymmetry factor (glum) attributed to the chiral silicon atom. The efficient synthesis of sila-pharmaceuticals using this method as a key step is also described.The technique enables the design and synthesis of various silicon-containing bioactive substances and medical chemicals. Through the synthesis of organosilane compounds using this method, it is anticipated that the development of functional organic silanes will accelerate their practical applications in a wide range of fields.

Recent Progress on the Synthesis of Bipyridine Derivatives.

Bipyridine and related compounds are starting materials or precursors for a variety of valuable substances such as biologically active molecules, ligands for catalysts, photosensitizers, viologens, and supramolecular architectures. Thus, it is important to classify their synthesis methods and understand their characteristics. Representative examples include methods using homo and heterocoupling of pyridine derivatives in the presence of a catalyst. Because bipyridine compounds strongly coordinate with metal centers, a decrease in catalytic activity and yield is often observed in the reaction system. To address this issue, this review provides insights into advances over the last ~30 years in bipyridine synthesis using metal complexes under both homogeneous and heterogeneous conditions. Moreover, strategies for bipyridine synthesis involving sulfur and phosphorous compounds are examined. These alternative pathways offer promising avenues for overcoming the challenges associated with traditional catalysis methods, providing a more comprehensive understanding of the synthesis landscape.

Reversible Transition between Discrete and 1D Infinite Architectures: A Temperature-Responsive Cu(I) Complex with a Flexible Disilane-Bridged Bis(pyridine) Ligand.

A thermoresponsive structural change based on a disilane-bridged bis(pyridine) ligand and CuI is reported. Single-crystal X-ray analysis revealed that there are two polymorphs in the Cu(I) complex: octanuclear copper(I) complex at 20 °C and 1D staircase copper(I) polymer complex at -173 °C. The formation of these polymorphs is due to the flexibility of the ligand. Cu-I bond formation is observed upon cooling the sample from -10 °C to -170 °C. The temperature-induced phase transition progression was clarified by DSC, VT-PXRD, and VT-photoluminescence measurements and indicated a reversible temperature-controlled crystal-to-crystal phase transition. Observation on a VT-stage using a high-speed camera showed crystal cracking during single-crystal to single-crystal transitions between these polymorphic forms.

A Series of D-A-D Structured Disilane-Bridged Triads: Structure and Stimuli-Responsive Luminescence Studies.

A series of σ-π extended octamethyltetrasilanes, which have phenothiazine, 9,9-dimethyl-9,10-dihydroacridine, or phenoxazine (1, 2, and 3) groups as donor moieties and thienopyrazine or benzothiadiazole (a and b) groups as acceptor fragments, has been prepared, and their optical properties have been studied as an extension of our work. All six compounds exhibited fluorescence in the solid state with maximum wavelengths centered in the range of 400 and 650 nm upon excitation by a UV lamp. Compound 2b showed apparent dual emission behavior in solution, which depends on solvent polarity, and a reversible photoluminescent change under mechanical and thermal stimuli in the solid state. Quantum chemical calculations suggest the contribution of a quasi-axial conformer of the 9,9-dimethyl-9,10-dihydroacridine moiety in 2b to the dual emission in solution and the mechanofluoroluminescence in the solid state, similarly to 1a. These studies provide new insight into the preparation of disilane-bridged triads capable of responding to multiple stimuli.

Synthesis, Structure, and Photophysical Properties of Yellow-Green and Blue Photoluminescent Dinuclear and Octanuclear Copper(I) Iodide Complexes with a Disilanylene-Bridged Bispyridine Ligand.

The synthesis, structural, and photophysical investigations of CuI complexes with a disilanylene-bridged bispyridine ligand 1 are herein presented. Dinuclear (2) and ladder-like (3) octanuclear copper(I) complexes were straightforwardly prepared by exactly controlling the ratio of CuI/ligand 1. Single-crystal X-ray analysis confirmed that dinuclear complex 2 had no apparent π…π stacking whereas octanuclear complex 3 had π…π stacking in the crystal packing. In the solid state, the complexes display yellow-green (λem = 519 nm, Φ = 0.60, τ = 11 µs, 2) and blue (λem = 478 nm, Φ = 0.04, τ = 2.6 µs, 3) phosphorescence, respectively. The density functional theory calculations validate the differences in their optical properties. The difference in the luminescence efficiency between 2 and 3 is attributed to the presence of π…π stacking and the different luminescence processes.

Luminescent Behavior Elucidation of a Disilane-Bridged D-A-D Triad Composed of Phenothiazine and Thienopyrazine.

A σ-π extended aryldisilane, comprising a thienopyrazine group as an acceptor fragment and phenothiazine groups as the donor moiety, has been prepared through the introduction of two Si-Si bridges (compound 1). X-ray diffraction analysis determined the crystal structure of 1, and experimental and theoretical approaches investigated its optical properties. Solvatochromic studies revealed the dual emission of 1 in all solvents tested. Compound 1 also exhibited fluorescence in the solid state upon excitation with a hand-held UV lamp, as well as mechanochromic luminescent properties. The packing mode in the crystal structure, variation of phenothiazine conformation, morphological changes between crystalline and amorphous phases are the major factors showing reversible fluorescence under external stimuli. A theoretical conformer study found that 1 exists in distinct conformational groups differing in Gibbs free energy by less than 3 kcal mol-1 . The conformer in the crystalline state of 1 can promote the complete separation of the HOMO and LUMO between the phenothiazine donor and the thienopyrazine acceptor, linked by the disilane linker. HOMO-LUMO energy transition in the crystalline state is forbidden due to the lack of frontier orbital overlap. Crystalline state emission showed LUMO → HOMO-1 transition (locally excited (LE) state). In the amorphous state, the partial presence of quasi-axial conformers allows intramolecular charge-transfer type emission via energy transfer from dominant quasi-equatorial conformers. The strategy proposed in this work provides important guidance for developing stimuli-responsive materials with controlled excited states.

Thermosalience in Macrocycle-Based Soft Crystals via Anisotropic Deformation of Disilanyl Architecture.

We describe here the preparation of soft crystals using disilanyl macrocycle C4 possessing four p-phenylenes circularly connected by four flexible disilane bonds. Single crystals of C4 exhibited a reversible thermal single-crystal-to-single-crystal (SCSC) phase transition behavior between two crystal phases accompanied by remarkable mechanical motion (thermosalient effect), as revealed by thermal analyses and X-ray diffraction measurements. Detailed structural analyses implied that flexibility of the parallelogram disilanyl architecture and molecular packing mode via weak intermolecular interactions facilitated a concerted structural transformation (parallel crank motion) of macrocycles in the crystal, thus resulting in the SCSC phase transition accompanied by anisotropic shrinking/elongation of the cells to induce the thermosalient effect. This work explores a new area of organosilicon chemistry and presents the potential utility of disilanyl macrocycles as soft crystals.

Photoelectric Conversion System Composed of Gene-Recombined Photosystem I and Platinum Nanoparticle Nanosheet.

Photosynthesis is one of the most vital processes in nature, which consists of two main photoreaction centers called photosystem I and photosystem II. The high quantum yield of photosystem I (PSI) makes it attractive for bioelectronic applications. However, the native PSI (N-PSI) loses its robust photochemical properties once fabricated into devices. This property degradation results from the difficulty in controlling the orientation of PSI. With the optimal orientation of PSI, photoexcited electrons can easily reach the electrode, yielding good photoelectric conversion efficiency. We developed a novel photoelectrode by integrating a newly designed gene-recombined PSI (G-PSI) with platinum nanoparticles (PtNPs) on substrates using a simple stacking method, which can control the orientation of PSI on the electrode. The target orientation of the attached G-PSI toward the substrate was confirmed by the absorption spectra of polarized light. An approximately 2-fold increase in the internal quantum yield (IQY) was observed for the G-PSI-attached electrode under 680 nm irradiation compared with that of the N-PSI-modified electrode. In addition, a 4-fold enhancement of the IQY was detected for cytochrome c (Cyt c) stacking on the G-PSI because of the electrostatic interaction, suggesting that Cyt c successfully secured the electron-transfer pathway.

Enhancement of the Photofunction of Phosphorescent Pt(II) Cyclometalated Complexes Driven by Substituents: Solid-State Luminescence and Circularly Polarized Luminescence.

Ligand functionalization is an attractive strategy for enhancing the performance of metal-based phosphorescent emitters. Here, we report the synthesis and characterization of cyclometalated Pt(II) complexes Pt3 and Pt4 containing organosilyl-substituted (2-(2-thienyl)pyridine) ligands and compare their properties with those of Pt1 (no substituent) and Pt2 (organocarbon substituent). The photophysical characteristics of these molecules, including their absorption and phosphorescence spectra, phosphorescence quantum yield and lifetime, were investigated. The molecular structures were revealed by X-ray diffraction analysis. Under UV light irradiation, Pt2-Pt4 emitted intense orange phosphorescence in the solid state because of the bulkiness of their side chains (up to ΦP: 0.49). Optically pure (-)-(S)Si-Pt4 and (+)-(R)Si-Pt4 were prepared using the optically active ligands (+)-L4 and (-)-L4, respectively. The chiroptical properties of (+)-(R)Si-Pt4, which has an asymmetric silicon atom, were investigated. Circular dichroism and circularly polarized luminescence measurements showed that these structural motifs are suitable for applications in chiroptical phosphorescent materials.

Effects of Substituents on the Blue Luminescence of Disilane-Linked Donor‒Acceptor‒Donor Triads.

A series of disilane-linked donor‒acceptor‒donor triads (D‒Si‒Si‒A‒Si‒Si‒D) was synthesized to investigate the effects of substituents on the photophysical properties. The triads were prepared by metal-catalyzed diiodosilylation of aryl iodides using a Pd(P(t-Bu)3)2/(i-Pr)2EtN/toluene system that we previously developed. Optical measurements, X-ray diffraction analysis, and density functional theory calculations revealed relationships between the photophysical properties and molecular structures of these triads in solution and in the solid state. The compounds emitted blue to green fluorescence in CH2Cl2 solution and in the solid state. Notably, compound 2 showed fluorescence with an absolute quantum yield of 0.17 in the solid state but showed no fluorescence in CH2Cl2. Our findings confirmed that the substituent adjacent to the disilane moiety affects the conformations and emission efficiencies of compounds in solution and in the solid state.

Multifunctional Octamethyltetrasila[2.2]cyclophanes: Conformational Variations, Circularly Polarized Luminescence, and Organic Electroluminescence.

Both symmetrical and unsymmetrical cyclophanes containing disilane units, tetrasila[2.2]cyclophanes 1-9, were synthesized. The syn and anti conformations and the kinetics of inversion between two anti-isomers were investigated by X-ray diffraction and variable-temperature NMR analysis, respectively. The flipping motion of two aromatic rings was affected by the bulkiness of the aromatic moiety (1 vs 6), the phase (solid vs solution), and the inclusion by host molecules (1 vs 1⊂[Ag2L]2+). The photophysical, electrochemical, and structural properties of the compounds were thoroughly investigated. Unsymmetrical tetrasila[2.2]cyclophanes 5-8 displayed blue-green emission arising from intramolecular charge transfer. Compound 6 emitted a brilliant green light in the solid state under 365 nm irradiation and showed a higher fluorescence quantum yield in the solid state (Φ = 0.49) than in solution (Φ = 0.05). We also obtained planar chiral tetrasila[2.2]cyclophane 9, which showed interesting chiroptical properties, such as a circularly polarized luminescence (CPL) with a dissymmetry factor of |glum| = ca. 2 × 10-3 at 500 nm. Moreover, an organic green light-emitting diode that showed a maximum external quantum efficiency (ηext) of ca. 0.4% was fabricated by doping 4,4'-bis(2,2'-diphenylvinyl)-1,1'-biphenyl with 6.

Conjugates between photosystem I and a carbon nanotube for a photoresponse device.

Photosystem I (PS I) is a large pigment-protein complex embedded in the thylakoid membranes that performs light-driven electron transfer across the thylakoid membrane. Carbon nanotubes exhibit excellent electrical conductivities and excellent strength and stiffness. In this study, we generated PSI-carbon nanotube conjugates dispersed in a solution aimed at application in artificial photosynthesis. PS I complexes in which a carbon nanotube binding peptide was introduced into the middle of the PsaE subunit were conjugated on a single-walled carbon nanotube, orienting the electron acceptor side to the nanotube. Spectral and photoluminescence analysis showed that the PS I is bound to a single-walled carbon nanotube, which was confirmed by transmission electron microscopy. Photocurrent observation proved that the photoexcited electron originated from PSI and transferred to the carbon nanotube with light irradiation, which also confirmed its orientated conjugation. The PS I-carbon nanotube conjugate will be a useful nano-optoelectronic device for the development of artificial systems.

Photocurrent Generation of Reconstituted Photosystem II on a Self-Assembled Gold Film.

Photosystem II (PSII)-modified gold electrodes were prepared by the deposition of PSII reconstituted with platinum nanoparticles (PtNPs) on Au electrodes. PtNPs modified with 1-[15-(3,5,6-trimethyl-1,4-benzoquinone-2-yl)]pentadecyl disulfide ((TMQ(CH2)15S)2) were incorporated into the QB site of PSII isolated from thermophilic cyanobacterium Thermosynechococcus elongatus. The reconstitution was confirmed by QA-reoxidation measurements. PSII reconstituted with PtNPs was deposited and integrated on a Au(111) surface modified with 4,4'-biphenyldithiol. The cross section of the reconstituted PSII film on the Au electrode was investigated by SEM. Absorption spectra showed that the surface coverage of the electrode was about 18 pmol PSII cm-2. A photocurrent density of 15 nAcm-2 at E = +0.10 V (vs Ag/AgCl) was observed under 680 nm irradiation. The photoresponse showed good reversibility under alternating light and dark conditions. Clear photoresponses were not observed in the absence of PSII and molecular wire. These results supported the photocurrent originated from PSII and moved to a gold electrode by light irradiation, which also confirmed conjugation with orientation through the molecular wire.

Access to Chiral Silicon Centers for Application to Circularly Polarized Luminescence Materials.

Asymmetric arylation of secondary silanes catalyzed by a Pd-chiral phosphoramidite complex was developed for application to low-molecular-weight circularly polarized luminescence (CPL) materials. The asymmetric arylation provided a convenient, efficient synthetic method for a variety of chiral tertiary silanes (2-21), which were key intermediates for preparing the quaternary silicon center. A stepwise, one-pot procedure was used to transform the appropriate aryl iodide to the quaternary silane (22) with good yield and enantioselectivity. Among compounds synthesized in this work, four optically pure tertiary silanes (18-21) were selected to investigate the relationship between the structure and optical properties. Optically pure (S,S)-21 displayed the highest CPL emission with a high fluorescence quantum yield (glum: +0.008, ΦF: 0.42). This simple molecular design provides new strategies for developing small organic CPL dyes.

Solvent-Controlled Doublet Emission of an Organometallic Gold(I) Complex with a Polychlorinated Diphenyl(4-pyridyl)methyl Radical Ligand: Dual Fluorescence and Enhanced Emission Efficiency.

A paramagnetic, luminescent organometallic gold(I) complex AuI(C6F5)(PyBTM), where PyBTM is a photostable fluorescent polychlorinated diphenyl(4-pyridyl)methyl radical, was prepared, and its crystal and electronic structures and magnetic and optical properties were investigated. Magnetic studies using electron spin resonance spectroscopy and a superconducting quantum interference device magnetometer indicated the existence of S = 1/2 spin per molecule, with the spin density distributed mainly on the PyBTM ligand. The complex exhibited fluorescence in CHCl3 with emission peak wavelength (λem) of 619 nm and the absolute fluorescence quantum yield (ϕem) of 0.04, confirming that AuI(C6F5)(PyBTM) is the first luminescent organometallic complex with a coordinated luminescent radical. Solvent-dependent unique luminescent characteristics were observed in halogenated solvents (CCl4, CHCl3, CH2Cl2, and ClCH2CH2Cl). ϕem decreased, and λem shifted to longer wavelengths as the polarity (dielectric constant) of the solvent increased. Notably, the complex in CCl4 displayed fluorescence with ϕem = 0.23, which was quite high in radicals, while showed dual fluorescence in CH2Cl2 and ClCH2CH2Cl with lifetimes of around 1 and 7 ns for two emissive components. Density functional theory (DFT) and time-dependent (TD)-DFT calculations indicated that the fluorescence occurred from an interligand charge transfer (CT) excited state in CCl4, in which the C6F5 and PyBTM moieties acted as electron donor and acceptor, respectively, while the fluorescence was centered at the PyBTM ligand in the other three solvents. This method, i.e., the formation of an interligand CT state, to enhance ϕem is distinctly different from the methods reported previously. The present study revealed that a coordination bond is available for forming emissive CT excited states that lead to high ϕem, providing a novel method with greater capability for realizing highly emissive radicals.

Effective Method for Micro-Patterning Arene-Terminated Monolayers on a Si(111) Electrode.

Microstructured electrodes are significant to modern electrochemistry. A representative aromatic group, 4-ferrocenylphenyl one, was covalently bound to a micropatterned silicon electrode via the arylation of a hydrogen-terminated silicon(111) surface formed selectively on a Si wafer. Starting from a silicon(100)-on-insulator (SOI) wafer, the aromatic monolayer was attached sequentially by spin-coating a resist, electron beam lithography, Cr/Au deposition, lift-off, anisotropic etching with aqueous KOH solution, and Pd-catalyzed arylation. Cyclic voltammetry (CV) and X-ray photoelectron spectroscopy (XPS) are used to characterize the coupling reaction between 4-ferrocenyl group and silicon substrate, and to confirm performance of the final modified microsized electrode. These data show that this synthetic protocol gives chemically well-defined and robust functionalized monolayers on a silicon semiconducting surface with a small electrode.

Bis(dipyrrinato)zinc(II) Complexes: Emission in the Solid State.

This Communication reports the first observation of solid-state photoluminescence in bis(dipyrrinato)zinc(II) complexes with various substituents. The report discusses the effect of their substituents on their crystal structures and spectroscopic properties. Their meso-aryl groups are revealed to play important roles in the spectroscopic properties in the solid state.

Effects of Substitution on Solid-State Fluorescence in 9-Aryl-9-methyl-9H-9-silafluorenes.

Aromatic groups were incorporated into 9H-9-silafluorene units at the 9-position (mono-9H-silafluorenes) and 9,9'-positions (di-9H-9-silafluorenes). The aryl substituents showed weak conjugation to the 9H-9-silafluorene for 9-aryl substituted ones 1-7 and a 9,9'-phenylene substituted one (compound 8) and they exhibited similar absorption and emission spectra. The 9H-9-silafluorene 10 containing a 5,5'-(2,2'-bithiophenyl) group showed a significantly red-shifted absorption and fluorescence maxima in the solid-state. Single-crystal X-ray diffraction studies found J-type aggregated structures formed by intermolecular CH-π interactions (ca. 2.6-2.7 Å). Density functional theory (DFT), time-dependent DFT (TD-DFT), and configuration interaction single (CIS) calculations were conducted to explain the observed optical properties.

Bright Solid-State Emission of Disilane-Bridged Donor-Acceptor-Donor and Acceptor-Donor-Acceptor Chromophores.

The development of disilane-bridged donor-acceptor-donor (D-Si-Si-A-Si-Si-D) and acceptor-donor-acceptor (A-Si-Si-D-Si-Si-A) compounds is described. Both types of compound showed strong emission (λem =ca. 500 and ca. 400 nm, respectively) in the solid state with high quantum yields (Φ: up to 0.85). Compound 4 exhibited aggregation-induced emission enhancement in solution. X-ray diffraction revealed that the crystal structures of 2, 4, and 12 had no intermolecular π-π interactions to suppress the nonradiative transition in the solid state.

Bio-inspired photoresponse of porphyrin-attached gold nanoparticles on a field-effect transistor.

A bio-inspired photoresponse was engineered in porphyrin-attached Au nanoparticles (AuNPs) on a field-effect transistor (FET). The system mimics photosynthetic electron transfer, using porphyrin derivatives as photosensitizers and AuNPs as photoelectron counting devices. Porphyrin-protected AuNPs were immobilized onto the gate of an FET via the formation of self-assembled monolayers. Photoinduced electron transfer from the porphyrin led to single electron transfer at the Au nanoparticles, which was monitored via a changing gate voltage on the FET in the presence of organic electrolyte. The further attachment of other functional molecules to this system should enable various other potential functionalities. This article is part of a special issue entitled: photosynthesis research for sustainability: keys to produce clean energy.