RESUMO
It is highly challenging to reproducibly prepare semiconducting polymers with targeted molecular weight tailored for next-generation photovoltaic applications. Once such an easily accessible methodology is established, which can not only contribute to overcome the current limitation of the statistically determined nature of semiconducting polymers, but also facilitate rapid incorporation into the broad synthetic chemists' toolbox. Here, we describe a simple yet robust ultrasonication-assisted Stille polymerization for accessing semiconducting polymers with high-precision tailored molecular weights (from low to ultrahigh molecular weight ranges) while mitigating their interbatch variations. We propose that ultrasound-induced simultaneous physical and chemical events enable precise control of the semiconducting polymers' molecular weights with high reproducibility to satisfy all the optical/electrical and morphological demands of diverse types of high-performance semiconducting polymer-based devices; as demonstrated in in-depth experimental screenings in applications of both organic and perovskite photovoltaics. We believe that this methodology provides a fast development of new and existing semiconducting polymers with the highest-level performances possible on various photovoltaic devices.
RESUMO
Polymer solar cells (PSCs) rely on a blend of small molecular acceptors (SMAs) with polymer donors, where thermodynamic relaxation of SMAs poses critical concerns on operational stability. To tackle this issue, tethered SMAs, wherein multiple SMA-subunits are connected to the aromatic-core via flexible chains, are proposed. This design aims to an elevated glass transition temperature (Tg) for a dynamical control. However, attaining an elevated Tg value with additional SMA subunits introduces complexity to the molecular packing, posing a significant challenge in realizing both high stability and power conversion efficiency (PCE). In this study, we initiate isomer engineering on the benzene-carboxylate core and find that meta-positioned dimeric BDY-ß exhibits more favorable molecular packing compared to its para-positioned counterpart, BDY-α. With this encouraging result, we expand our approach by introducing an additional SMA unit onto the aromatic core of BDY-ß, maintaining a meta-position relative to each SMA unit location in the tethered acceptor. This systematic aromatic-core engineering results in a star-shaped C3h-positioned molecular geometry. The supramolecular interactions of SMA units in the trimer contribute to enhancements in Tg value, crystallinity, and a red-shifted absorption compared to dimers. These characteristics result in a noteworthy increase in PCE to 18.24 %, coupled with a remarkable short-circuit current density of 27.06â mA cm-2. More significantly, the trimer-based devices delivered an excellent thermal stability with over 95 % of their initial efficiency after 1200â h thermal degradation. Our findings underscore the promise and feasibility of tethered trimeric structures in achieving highly ordered aggregation behavior and increased Tg value in PSCs, simultaneously improving in device efficiency and thermal stability.
RESUMO
Donor polymers play a key role in the development of organic solar cells (OSCs). B-N-based polymer donors, as new types of materials, have attracted a lot of attention due to their special characteristics, such as high E(T1), small ΔEST, and easy synthesis, and they can be processed with real green solvents. However, the relationship between the chemical structure and device performance has not been systematically studied. Herein, chalcogen atoms that regulate the OSCs performance of B-N-based polymer donors were systematically studied. Fortunately, the substitution of a halogen atom did not affect the high E(T1) and small ΔEST character of the B-N-based polymer. The absorption and energy levels of the polymer were systematically regulated by O, S, and Se atom substitution. The PBNT-TAZ:Y6-BO-based OSCs device demonstrated a high power conversion efficiency of 15.36%. Moreover, the layer-by-layer method was applied to further optimize the device performance, and the PBNT-TAZ/Y6-BO-based OSCs device yielded a PCE of 16.34%. Consequently, we have systematically demonstrated how chalcogen atoms modulated the electronic properties of B-N-based polymers. Detailed and systematic structure-performance relationships are important for the development of next-generation B-N-based materials.
RESUMO
Large areas and simple processing methods are necessary for the commercialization of organic photovoltaics (OPVs). However, the efficiency drop due to the variation in thickness of OPVs limits their large-scale applications. Regioregular polymers with good crystallinity and packing properties that exhibit high charge mobility and extraction ability can help overcome these limitations. In this study, a regioregular polymer named PDBD-2FBT was synthesized. The crystallinity and packing properties of PDBD-2FBT were enhanced by a simple thermal treatment. Using PDBD-2FBT material as a donor and Y6-HU as an acceptor, we fabricated binary blend OPV devices. The devices with optimized active layer thickness achieved a power conversion efficiency (PCE) of 14.14%. A PCE of 13.18% was maintained even in thick-film conditions (400 nm), and thickness tolerance was observed. Based on the thickness tolerance, a 5-line module measuring 36 cm2 was fabricated via the bar-coating method, and a PCE of approximately 10% was achieved.
RESUMO
Current core-shell hybrids used in diverse energy-related applications possess limited dispersibility and film uniformity that govern their overall performances. Herein, we showcase superdispersible core-shell hybrids (P2VP@BaTiO3) composed of a poly(2-vinylpyridine) (P2VP) (5-20 wt %) and a barium titanate oxide (BaTiO3), maximizing dielectric constants by forming the high-quality uniform films. The P2VP@BaTiO3-based triboelectric nanogenerators (TENGs), especially the 10 wt % P2VP (P2VP10@BaTiO3)-based one, deliver significantly enhanced output performances compared to physically mixed P2VP/BaTiO3 counterparts. The P2VP10@BaTiO3-based double-layer TENG exhibits not only an excellent transferred charge density of 281.7 µC m-2 with a power density of 27.2 W m-2 but also extraordinary device stability (â¼100% sustainability of the maximum output voltage for 54,000 cycles and â¼68.7% voltage retention even at 99% humidity). Notably, introducing the MoS2/SiO2/Ni-mesh layer into this double-layer TENG enables ultrahigh charge density of up to 1228 µC m-2, which is the top value reported for the TENGs so far. Furthermore, we also demonstrate a near-field communication-based sensing system for monitoring CO2 gas using our developed self-powered generator with enhanced output performance and robustness.
RESUMO
Near-infrared organic photodetectors possess great application potential in night vision, optical communication, and image sensing, but their development is limited by the lack of narrow bandgap organic semiconductors. A-D-A'-D-A-type molecules, featuring multiple intramolecular charge transfer effects, offer a robust framework for achieving near-infrared light absorption. Herein, we report a novel A-D-A'-D-A-type narrow bandgap electron acceptor named DPPSe-4Cl, which incorporates a selenophene-flanked diketopyrrolopyrrole (Se-DPP) unit as its central A' component. This molecule demonstrates exceptional near-infrared absorption properties with an absorption onset reaching 1120 nm and a low optical bandgap of 1.11 eV, owing to the strong electron-withdrawing ability and quinoidal resonance effect induced by the Se-DPP unit. By implementing a doping compensation strategy assisted by Y6 to reduce the trap density in the photoactive layer, the optimized organic photodetector based on DPPSe-4Cl exhibited efficient spectral response and remarkable sensitivity in the range of 300-1100 nm. Particularly, a specific detectivity surpassing 1012 Jones in the wavelength range of 410-1030 nm is achieved. This work offers a promising approach for developing highly sensitive visible to near-infrared broadband photodetection technology using organic semiconductors.
RESUMO
Acceptor-only oligomers are developed as guest components to construct oligomer-assisted active layers for high performance organic solar cells. Due to the high planarity and structural similarity with the host polymer donor, BDD-based acceptor-only oligomers formed an alloy phase with PM6 and optimized the phase morphology effectively, achieving a stable device displaying 18% efficiency.
RESUMO
Pendant groups in acrylic adhesive polymers (Ads) have a profound influence on adhesive and cohesive properties and additionally on encapsulant application. However, a systematic investigation to assess the impact of the pendant groups' length and bulkiness is rare, and there is not even a single report on applying Ads as interfacial adhesion promotors and encapsulation materials simultaneously. Herein, we have developed a series of multifunctional methacrylic polymers, namely, R-co-Ads, with varying pendant length and bulkiness (R = methyl (C1), ethyl (C2), propyl (C3), butyl (C4), pentyl (C5), hexyl (C6), isobutyl (iC4), and 2-ethylhexyl (2EH)). The adhesion-related experimental results reveal that R-co-Ads have high transparency, strong adhesion strength to the various contact surfaces, and a fast cure speed. In particular, C1-co-Ad shows a superior adhesion performance with an improved cross-cut index of 4B and a shear bonding strength of 1.56 MPa. We also have adopted C1-co-Ad for encapsulation of various emerging optoelectronic applications (e.g., perovskite solar cell-, charge transport-, and conductivity-related characteristics), demonstrating its excellent edge encapsulant served to improve the device stability against ambient air conditions. Our study establishes the structure-adhesion-surface relationships, advancing the better design of adhesives and encapsulants for various research fields.
RESUMO
Single-component organic solar cells (SCOSCs) with covalently bonding donor and acceptor are becoming increasingly attractive because of their superior stability over traditional multicomponent blend organic solar cells (OSCs). Nevertheless, the efficiency of SCOSCs is far behind the state-of-the-art multicomponent OSCs. Herein, by combination of the advantages of three-component and single-component devices, this work reports an innovative three-in-one strategy to boost the performance of SCOSCs. In this three-in-one strategy, three independent components (PM6, D18, and PYIT) are covalently linked together to create a new single-component active layer based on ternary conjugated block copolymer (TCBC) PM6-D18-b-PYIT by a facile polymerization. Precisely manipulating the component ratios in the polymer chains of PM6-D18-b-PYIT is able to broaden light utilization, promote charge dynamics, optimize, and stabilize film morphology, contributing to the simultaneously enhanced efficiency and stability of the SCOSCs. Ultimately, the PM6-D18-b-PYIT-based device exhibits a power conversion efficiency (PCE) of 14.89%, which is the highest efficiency of the reported SCOSCs. Thanks to the aggregation restriction of each component and chain entanglement in the three-in-one system, the PM6-D18-b-PYIT-based SCOSC displays significantly higher stability than the corresponding two-component (PM6-D18:PYIT) and three-component (PM6:D18:PYIT). These results demonstrate that the three-in-one strategy is facile and promising for developing SCOSCs with superior efficiency and stability.
RESUMO
Detecting short-wavelength infrared (SWIR) light has underpinned several emerging technologies. However, the development of highly sensitive organic photodetectors (OPDs) operating in the SWIR region is hindered by their poor external quantum efficiencies (EQEs) and high dark currents. Herein, the development of high-sensitivity SWIR-OPDs with an efficient photoelectric response extending up to 1.3 µm is reported. These OPDs utilize a new ultralow-bandgap molecular semiconductor featuring a quinoidal tricyclic electron-deficient central unit and multiple non-covalent conformation locks. The SWIR-OPD achieves an unprecedented EQE of 26% under zero bias and an even more impressive EQE of up to 41% under a -4 V bias at 1.10 µm, effectively pushing the detection limit of silicon photodetectors. Additionally, the low energetic disorder and trap density in the active layer lead to significant suppression of thermal-generation carriers and dark current, resulting in excellent detectivity (Dsh *) exceeding 1013 Jones from 0.50 to 1.21 µm and surpassing 1012 Jones even at 1.30 µm under zero bias, marking the highest achievements for OPDs beyond the silicon limit to date. Validation with photoplethysmography measurements, a spectrometer prototype in the 0.35-1.25 µm range, and image capture under 1.20 µm irradiation demonstrate the extensive applications of this SWIR-OPD.