RESUMO
Single-phase formation of active metal oxides on supports has been vigorously pursued in many catalytic applications to suppress undesired reactions and to determine direct structure-property relationships. However, this is difficult to achieve in nanoscale range because the effect of non-uniform metal-support interfaces becomes dominant in the overall catalyst growth, leading to the nucleation of various metastable oxides. Herein, we develop a supported single-phase corundum-Rh2 O3 (I) nanocatalyst by utilizing controlled interaction between metal oxide and h-BN support. Atomic-resolution electron microscopy and first-principle calculation reveal that single-phase formation occurs via uniform and preferential attachment of Rh2 O3 (I) (110) seed planes on well-defined h-BN surface after decomposition of rhodium precursor. By utilizing the Rh/h-BN catalyst in methane partial oxidation, syngas is successfully produced solely following the direct route with keeping a H2 /CO ratio of 2, which makes it ideal for most downstream chemical processes.
RESUMO
Direct methane conversion into value-added products has become increasingly important. Because of inertness of methane, cleaving the first C-H bond has been very difficult, requiring high reaction temperature on the heterogeneous catalysts. Once the first C-H bond becomes activated, the remaining C-H bonds are successively dissociated on the metal surface, hindering the direct methane conversion into chemicals. Here, a single-atom Rh catalyst dispersed on ZrO2 surface has been synthesized and used for selective activation of methane. The Rh single atomic nature was confirmed by extended X-ray fine structure analysis, electron microscopy images, and diffuse reflectance infrared Fourier transform spectroscopy. A model of the single-atom Rh/ZrO2 catalyst was constructed by density functional theory calculations, and it was shown that CH3 intermediates can be energetically stabilized on the single-atom catalyst. The direct conversion of methane was performed using H2O2 in the aqueous solution or using O2 in gas phase as oxidants. Whereas Rh nanoparticles produced CO2 only, the single-atom Rh catalyst produced methanol in aqueous phase or ethane in gas phase.
RESUMO
Correction for 'Observation of crystalline changes of titanium dioxide during lithium insertion by visible spectrum analysis' by Inho Nam et al., Phys. Chem. Chem. Phys., 2017, 19, 13140-13146.
RESUMO
Real-time analysis of changes in the atomic environment of materials is a cutting edge technology that is being used to explain reaction dynamics in many fields of science. Previously, this kind of analysis was only possible using heavy nucleonic equipment such as XANES and EXAFS, or Raman spectroscopy on a moderate scale. Here, a new methodology is described that can be used to track changes in crystalline developments during complex Li insertion reactions via the observation of structural color. To be specific, the changes in atomic crystalline and nanostructure are shown during Li insertion in a complex TiO2 polymorph. Structural color corresponds to the refractive indices of materials originating from their atomic bonding nature and precise wave interferences in accordance with their nanostructure. Therefore, this new analysis simultaneously reveals changes in the nanostructure as well as changes in the atomic bonding nature of materials.
RESUMO
A sponge-like Li(4)Ti(5)O(12)/graphene composite was prepared via sequential hydrothermal process and solid-state heat treatment process for the application to high-power lithium ion batteries. The as-prepared electrode showed outstanding Li electroactivities with a rapid and reversible Li insertion/ extraction of up to 10 C-rate (1.75 A/g). It delivered a discharge capacity of 174 mAh/g at 0.5 C, near the theoretical capacity of Li(4)Ti(5)O(12), with good rate capability and cyclic stability. First-principles calculations revealed the intimate interaction of the Li(4)Ti(5)O(12) and graphene, which implies that graphene functions as an 'electron tunnel.' Electrochemical impedance spectroscopy also proved that the graphene-hybridization and the unique structure of the Li(4)Ti(5)O(12) material significantly reduce the resistive behavior of electrodes. The 3D structured Li(4)Ti(5)O(12)/graphene hybrid reported herein could be a promising candidate for a safe, low-cost, high-power anode for lithium ion batteries, and our seeding-growth-sintering method for decorating graphene with active material will offer an effective upgrade on highly insulating Li(4)Ti(5)O(12) materials.
RESUMO
We report on a one-step method for preparing nitrogen doped (N-doped) meso-/microporous hybrid carbon material (NCF) via the heat treatment of used cigarette filters under a nitrogen-containing atmosphere. The used cigarette filter, which is mostly composed of cellulose acetate fibers, can be transformed into a porous carbon material that contains both the mesopores and micropores spontaneously. The unique self-developed pore structure allowed a favorable pathway for electrolyte permeation and contact probability, resulting in the extended rate capability for the supercapacitor. The NCF exhibited a better rate capability and higher specific capacitance (153.8 F g(-1)) compared to that of conventional activated carbon (125.0 F g(-1)) at 1 A g(-1). These findings indicate that the synergistic combination of well-developed meso-/micropores, an enlarged surface area and pseudocapacitive behavior leads to the desired supercapacitive performance. The prepared carbon material is capable of reproducing its electrochemical performance during the 6000 cycles required for charge and discharge measurements.
Assuntos
Celulose/análogos & derivados , Capacitância Elétrica , Eletrodos , Produtos do Tabaco , Celulose/química , Eletroquímica , Nitrogênio/química , PorosidadeRESUMO
Copper-containing mesoporous carbons (XCu-MC) with different copper content (X = 8.0, 12.7, 15.9, 23.3, and 26.8 wt%) were prepared by a single-step surfactant-templating method. Rhenium nano-catalysts supported on copper-containing mesoporous carbons (Re/XCu-MC) were then prepared by an incipient wetness method. Re/XCu-MC (X = 8.0, 12.7, 15.9, 23.3, and 26.8 wt%) catalysts were characterized by nitrogen adsorption-desorption isotherm, HR-TEM, FT-IR, and H2- TPR analyses. Liquid-phase hydrogenation of succinic acid to 1,4-butanediol (BDO) via dimethyl succinate (DMS) was carried out over Re/XCu-MC catalysts in a batch reactor. The effect of copper content on the physicochemical properties and catalytic activities of Re/XCu-MC catalysts in the hydrogenation of succinic acid to BDO was investigated. Re/XCu-MC catalysts retained different physicochemical properties depending on copper content. In the hydrogenation of succinic acid to BDO, yield for BDO showed a volcano-shaped trend with respect to copper content. Thus, an optimal copper content was required to achieve maximum catalytic performance of Re/XCu-MC. It was also observed that yield for BDO increased with increasing the amount of hydrogen consumption by copper in the Re/XCu-MC catalysts.
Assuntos
Butileno Glicóis/química , Cobre/química , Nanopartículas Metálicas/química , Rênio/química , Ácido Succínico/química , Butileno Glicóis/análise , Carbono/química , Hidrogenação , Succinatos/química , Ácido Succínico/análiseRESUMO
Increase in the use of manufactured nanomaterials (NMs) has led to concerns about the environmental impacts. Especially, hazard of metal-based NMs is more severe due to ions released from surface by water quality parameters and physicochemical properties after entering into the water environment. However, little is known about the effects of ionization on the toxicity of metal-based NMs in the water environment. To address this question, we prepared the suspensions of silver nanoparticles (AgNP) at 25 µg L(-1) containing different concentrations of Ag(+) (5, 10, 20, 45, and 75% Ag(+) to total Ag), and evaluated their toxicity to Japanese medaka (Oryzias latipes) embryos. Higher Ag(+) ratios in the AgNP suspension, suggesting the lower number of particles, led to the higher adverse effects on embryos and sac-fries. In addition, histopathology analysis revealed that AgNPs penetrated through chorion of eggs and skin membrane, and were distributed into the tissues. The results imply that the ionization could decrease the toxicity of metal-based NMs in the water environment.
Assuntos
Embrião não Mamífero/efeitos dos fármacos , Nanopartículas/toxicidade , Oryzias/embriologia , Prata/toxicidade , Poluentes Químicos da Água/toxicidade , Animais , Relação Dose-Resposta a Droga , Embrião não Mamífero/patologia , Íons/toxicidade , Mortalidade , Prata/química , Prata/farmacocinética , Testes de Toxicidade/métodos , Poluentes Químicos da Água/química , Poluentes Químicos da Água/farmacocinéticaRESUMO
Great strides have been made in enhancing solar energy conversion by utilizing plasmonic nanostructures in semiconductors. However, current generation with plasmonic nanostructures is still somewhat inefficient owing to the ultrafast decay of plasmon-induced hot electrons. It is now shown that the ultrafast decay of hot electrons across Au nanoparticles can be significantly reduced by strong coupling with CdS quantum dots and by a Schottky junction with perovskite SrTiO3 nanoparticles. The designed plasmonic nanostructure with three distinct components enables a hot-electron-assisted energy cascade for electron transfer, CdSâAuâSrTiO3, as demonstrated by steady-state and time-resolved photoluminescence spectroscopy. Consequently, hot-electron transfer enabled the efficient production of H2 from water as well as significant electron harvesting under irradiation with visible light of various wavelengths. These findings provide a new approach for overcoming the low efficiency that is typically associated with plasmonic nanostructures.
RESUMO
We report on an on-chip colorimetric method for the detection and analysis of Cu(2+) ions via the targeted assembly of plasmonic silver nanoparticles (2.6 nm satellites) on density-controlled plasmonic gold nanoparticles (50 nm cores) on a glass substrate. Without any ligand modification of the nanoparticles, by directly using an intrinsic moiety (carboxylate ion, COO(-)) surrounded with nanoparticles, the method showed a high selectivity for Cu(2+), resulting in a nearly 2 times greater optical response compared to those of other metal ions via the targeted core-satellites assembly. By modulating the surface chemistry, it was possible to control the density of core gold nanoparticles on the surface, thus permitting easy tuning of the optical responses induced by plasmon coupling generated between each core-satellites nanostructure. Using chips with a controlled optimal core density, we observed the remarkable scattering color changes of the chips from green to yellow and finally to orange with the increase of Cu(2+) concentration. The detection limits of the fabricated chips with controlled core densities (ca. 1821 and 3636 particles/100 µm(2)) are 10 nM and 10 pM, respectively, which are quite tunable and below the level of 20 µM (or 1.3 ppm) defined by the United States Environmental Protection Agency. The findings suggest that the method is a potentially promising protocol for detecting small molecules with target selectivity and the tunability of the detection limits by replacing with ligands and adjusting core densities.
Assuntos
Colorimetria/métodos , Cobre/análise , Cátions Bivalentes , Dispositivos Lab-On-A-Chip , Nanopartículas MetálicasRESUMO
We report on a simple strategy for the direct synthesis of a thin film comprising interconnected NiO nanoparticles deposited on both sides of a graphene sheet via cathodic deposition. For the co-electrodeposition, graphene oxide (GO) is treated with water-soluble cationic poly(ethyleneimine) (PEI) which acts as a stabilizer and trapping agent to form complexes of GO and Ni2+. The positively charged complexes migrate toward the stainless steel substrate, resulting in the electrochemical deposition of PEI-modified GO/Ni(OH)2 at the electrode surface under an applied electric field. The as-synthesized film is then converted to graphene/NiO after annealing at 350 ° C. The interconnected NiO nanoparticles are uniformly deposited on both sides of the graphene surface, as evidenced by field emission scanning electron microscopy, transmission electron microscopy and energy dispersive spectrometry. This graphene/NiO structure shows enhanced electrochemical performance with a large reversible capacity, good cyclic performance and improved electronic conductivity as an anode material for lithium ion batteries. A reversible capacity is retained above 586 mA h g−1 after 50 cycles. The findings reported herein suggest that this strategy can be effectively used to overcome a bottleneck problem associated with the electrochemical production of graphene/metal oxide films for lithium ion battery anodes.
RESUMO
Silicon nanoparticles trapped in an ordered mesoporous carbon composite were prepared by a one-step self-assembly with solvent evaporation using the triblock copolymer Pluronic F127 and a resorcinol-formaldehyde polymer as the templating agent and carbon precursor respectively. Such a one-pot synthesis of Si/ordered mesoporous carbon nanocomposite is suitable for large-scale synthesis. Characterization confirmed that the Si nanoparticles were trapped in the ordered mesoporous carbon, as evidenced by transmission electron microscopy, x-ray diffraction analysis and nitrogen sorption isotherms. The composite showed a high reversible capacity above 700 mA h g(-1) during 50 cycles at 2 A g(-1). The improved electrochemical performance of the composite can be ascribed to the buffering effect of spaces formed in the ordered pore channels during the volume expansion of silicon and the rapid movement of lithium ions through the uniform cylindrical pore structure of the mesopores.
Assuntos
Fontes de Energia Elétrica , Eletrodos , Lítio/química , Nanoestruturas/química , Nanoestruturas/ultraestrutura , Nanotubos de Carbono/química , Silício/química , Cristalização/métodos , Desenho de Equipamento , Análise de Falha de Equipamento , Íons , Lítio/isolamento & purificação , Nanotubos de Carbono/ultraestrutura , Tamanho da PartículaRESUMO
Copper-containing mesoporous carbon (Cu-MC) was prepared by a single-step surfactant-templating method. For comparison, copper-impregnated mesoporous carbon (Cu/MC) was also prepared by a surfactant-templating method and a subsequent impregnation method. Rhenium catalysts supported on copper-containing mesoporous carbon and copper-impregnated mesoporous carbon (Re/Cu-MC and Re/Cu/MC, respectively) were then prepared by an incipient wetness method, and they were applied to the liquid-phase hydrogenation of succinic acid to 1,4-butanediol (BDO). It was observed that copper in the Re/Cu-MC catalyst was well incorporated into carbon framework, resulting in higher surface area and larger pore volume than those of Re/Cu/MC catalyst. Therefore, Re/Cu-MC catalyst showed higher copper dispersion than Re/Cu/MC catalyst, although both catalysts retained the same amounts of copper and rhenium. In the liquid-phase hydrogenation of succinic acid to BDO, Re/Cu-MC catalyst showed a better catalytic activity than Re/Cu/MC catalyst. Fine dispersion of copper in the Re/Cu-MC catalyst was responsible for its enhanced catalytic activity.
Assuntos
Butileno Glicóis/química , Carbono/química , Hidrogênio/química , Nanoestruturas/química , Nanoestruturas/ultraestrutura , Rênio/química , Ácido Succínico/química , Catálise , Cristalização/métodos , Hidrogenação , Substâncias Macromoleculares/química , Teste de Materiais , Conformação Molecular , Tamanho da Partícula , Porosidade , Propriedades de SuperfícieRESUMO
Although little is known about the behavior of engineered nanomaterials after exposure to terrestrial areas, recent studies indicate that silver nanoparticles (AgNPs) can perturb the soil environment due to their biocidal and catalytic properties. The fundamental evaluation of the environmental fate of AgNPs would be a significant step toward a comprehensive understanding of the harmful effects of such particles on ecosystems. Therefore, from an eco-toxicological perspective, the estimation of AgNP behavior in soil should be investigated. Among the various environmental characteristics, the deposition of nanoparticles in the soil constitute is a critical step in their migration into surface or groundwater and interaction with organisms, which is determined by the stability of aqueous dispersions in a soil micro-environment. In the present study, we observed the aggregation and deposition of AgNPs to natural soil surfaces by comparing the partitioning of AgNPs in a soil/water interface with that of Ag+ ion. Both AgNPs and Ag+ ion were selectively quantified by means of inductively coupled plasma (ICP) spectrometry and an ion-selective electrode (ISE). We interpreted the partitioning of AgNPs and Ag+ ion using the Freundlich isotherm and the findings indicate that AgNPs with reduced dispersion stability in a soil micro-environment were aggregated and deposited on the surface of natural soil. This study provides a fundamental basis for understanding the deposition of AgNPs, which will enable their accumulation and mobility in a soil environment to be predicted.
RESUMO
Engineered nanoparticles (NPs), increasingly used in industry, enter and migrate through biological ecosystems. NPs may create some acute toxicity, but their overall effects on living organisms remain largely unknown. In particular, the behavior of NPs in natural conditions and their consequent ecological effects are still poorly understood. In this study, we developed methods to test the phytotoxicity of two distinctly different NPs, one aerosol (nano-TiO2), and the other colloidal silver (AgNP), by specifically considering their tendencies to agglomerate and form precipitates. First we examined effects of these NPs on germination and root elongation. While exposure to neither of these NPs resulted in acute toxicity on germination, silver NPs caused significantly decreased root elongation at every concentration we tested. We found that the hydrodynamic diameters of AgNPs were much smaller than those of nano-TiO2, which induced higher uptake and phytotoxicity. Based on the agglomeration behavior of the NPs, greenhouse trials were run using commercial soil, for nano-TiO2, and Hoagland's solution, for AgNP. Phytotoxicity of silver NPs in the mature plants was demonstrated by lower chlorophyll contents, higher superoxide dismutase activity and less fruit productivity, while nano-TiO2 resulted in higher superoxide dismutase activity at the highest concentration (5000mg/kg). Both nano-TiO2 and AgNPs were taken up into plant stems, leaves and fruits. Our results suggest that further studies of the ecological effects of nanoparticles and steps to mitigate appropriate management strategies are required.
Assuntos
Poluentes Ambientais/toxicidade , Nanopartículas/toxicidade , Prata/toxicidade , Solanum lycopersicum/efeitos dos fármacos , Titânio/toxicidade , Germinação/efeitos dos fármacos , Raízes de Plantas/efeitos dos fármacos , Solo/químicaRESUMO
Cu/Zn-superoxide dismutase (SOD1) is present in the cytosol, nucleus, peroxisomes and mitochondrial intermembrane space of human cells. More than 114 variants of human SOD1 have been linked to familial amyotrophic lateral sclerosis (ALS), which is also known as Lou Gehrig's disease. Although the ultimate mechanisms underlying SOD1-mediated cytotoxicity are largely unknown, SOD1 aggregates have been strongly implicated as a common feature in ALS. This study examined the mechanism for the formation of SOD1 aggregates in vitro as well as the nature of its cytotoxicity. The aggregation propensity of SOD1 species was investigated using techniques ranging from circular dichroism spectroscopy to fluorescence dye binding methods, as well as electron microscopic imaging. The aggregation of SOD1 appears to be related to its structural instability. The demetallated (apo)-SOD1 and aggregated SOD1 species, with structurally disordered regions, readily undergo aggregation in the presence of lipid molecules, whereas metallated (holo)-SOD1 does not. The majority of aggregated SOD1s that are induced by lipid molecules have an amorphous morphology and exhibit significant cytotoxicity. The lipid binding propensity of SOD1 was found to be closely related to the changes in surface hydrophobicity of the proteins, even at very low levels, which induced further binding and assembly with lipid molecules. These findings suggest that lipid molecules induce SOD1 aggregation under physiological conditions and exert cytotoxicity, and might provide a possible mechanism for the pathogenesis of ALS.
Assuntos
Lipídeos/química , Conformação Proteica , Superóxido Dismutase/química , Esclerose Lateral Amiotrófica/enzimologia , Animais , Sobrevivência Celular/efeitos dos fármacos , Dicroísmo Circular , Humanos , Interações Hidrofóbicas e Hidrofílicas/efeitos dos fármacos , Lipídeos/farmacologia , Microscopia Eletrônica de Transmissão , Células PC12 , Ratos , Espectrometria de Fluorescência , Superóxido Dismutase/farmacologia , Superóxido Dismutase/ultraestruturaRESUMO
We report core-satellites (Au-Ag) coupled plasmonic nanoassemblies based on bottom-up, high-density assembly of molecular-scale silver nanoparticles on a single gold nanoparticle surface, and demonstrate direct observation and quantification of enhanced plasmon coupling (i.e., intensity amplification and apparent spectra shift) in a single particle level. We also explore metal ion sensing capability based on our coupled plasmonic core-satellites, which enabled at least 1000 times better detection limit as compared to that of a single plasmonic nanoparticle. Our results demonstrate and suggest substantial promise for the development of coupled plasmonic nanostructures for ultrasensitive detection of various biological and chemical analytes.
Assuntos
Ouro/química , Nanopartículas Metálicas/química , Metais/análise , Prata/química , Ressonância de Plasmônio de Superfície/métodos , Nanopartículas Metálicas/ultraestrutura , Sensibilidade e Especificidade , Propriedades de SuperfícieRESUMO
A supercapacitor has the advantages of both the conventional capacitors and the rechargeable batteries. Mn oxide is generally recognized one of the potential materials that can be used for a supercapacitor, but its low conductivity is a limiting factor for electrode materials. In this study, a hybrid of amorphous Mn oxide (AMO) and ordered mesoporous carbon (OMC) was prepared and characterized using X-ray diffraction, transmission electron microscopy, N2/77 K sorption techniques, and electrochemical analyses. The findings indicate that the electrochemical activities of Mn oxide were facilitated when it was in the hybrid state because OMC acted as a pathway for both the electrolyte ions and the electrons due to the characteristics of the ordered mesoporous structure. The ordered mesoporous structure of OMC was well maintained even after hybridization with amorphous Mn oxide. The electrochemical-activity tests revealed that the AMO/OMC hybrid had a higher specific capacitance and conductivity than pure Mn oxide. In the case where the Mn/C weight ratio was 0.75, the composite showed a high capacitance of 153 F/g, which was much higher than that for pure Mn oxide, due to the structural effects of OMC.
RESUMO
The chronic toxicity test has been conducted for twenty-eight days to characterize the hepatic expression levels of eight stress-related genes after exposing Medaka to two doses of silver nitrate or a silver nanoparticle (Ag-NP) using real time RT-PCR analysis. This extends our previously published work to include three additional biomarkers and three later time points. In comparing with the control, the significant induction of MT and GST genes in livers of the fish exposed to 1 µg/l Ag-NPs was observed at various time points during the test period. The Orla C3-1 (Medaka) gene was slightly induced only with 1 µg/l Ag-NPs at 7-day exposure while the suppression of p53 and HSP70 was recorded in all exposures at the end of the test. The gene encoding transferrin was repressed at day 21 by both silver types and at every exposure dosage. These results revealed that the Ag-NPs increase metal detoxification, oxidative and inflammatory stress, and finally stimulate immune responses in Medaka. The conspicuous induction of choriogenin L and vitellogenin 1 in male fish exposed to Ag-NPs, especially at 7- and 21-day, compared with the exposures of AgNO(3) or control was the first attempt to examine estrogenic effects of Ag-NPs.
Assuntos
Expressão Gênica/efeitos dos fármacos , Nanopartículas Metálicas/toxicidade , Prata/toxicidade , Poluentes Químicos da Água/toxicidade , Animais , Biomarcadores/metabolismo , Estrogênios/toxicidade , Fígado/metabolismo , Masculino , Oryzias/fisiologia , Reação em Cadeia da Polimerase Via Transcriptase Reversa , Vitelogeninas/genética , Vitelogeninas/metabolismoRESUMO
Nanoporous carbon materials with a controlled pore size and surface area were prepared using grafting method. The use of 3-mercaptopropyltrimethoxysilane (MPTMS) as a grafting material played an important role in producing a porous structure by linking the silica to the polymer, with the subsequent formation of a silica-polymer composite. Importantly, the use of an organic solvent, compared to an aqueous solvent, has a positive effect in forming uniform and well-developed carbon structures, due to the high degree of dispersion with well-mixing of the carbon and silica precursors. The amounts of MPTMS and carbon precursor used determined the pore size and surface area of resulting carbon materials. The optimum ratio of MPTMS and carbon precursor for achieving a high surface area in excess of 2000 m2/g was determined. The use of a large amount of carbon precursor resulted in carbons with a relatively small surface area and an increase in MPTMS content led to an increase in the microporous structures. The capacitance value of the porous carbon prepared using the optimum ratio was determined to be 150 F/g.