RESUMO
The progressive decline of the coal industry necessitates the development of effective treatment solutions for acid mine drainage (AMD), which is characterized by high acidity and elevated concentrations of heavy metals. This study proposes an innovative approach leveraging sulfate-reducing bacteria (SRB) acclimated to contaminated anaerobic environments. The research focused on elucidating the physiological characteristics and optimal growth conditions of SRB, particularly in relation to the pH level and temperature. The experimental findings reveal that the SRB exhibited a sulfate removal rate of 88.86% at an optimal temperature of 30 °C. Additionally, SRB gel particles were formulated using sodium alginate (SA) and carboxymethyl cellulose (CMC), and their performance was assessed under specific conditions (pH = 6, C/S = 1.5, T = 30 °C, CMC = 4.5%, BSNa = 0.4 mol/L, and cross-linking time = 9 h). Under these conditions, the SRB gel particles demonstrated an enhanced sulfate removal efficiency of 91.6%. Thermal analysis via differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) provided further insights into the stability and properties of the SRB gel spheres. The findings underscore the potential of SRB-based bioremediation as a sustainable and efficient method for AMD treatment, offering a novel and environmentally friendly solution to mitigating the adverse effects of environmental contamination.
Assuntos
Biodegradação Ambiental , Mineração , Concentração de Íons de Hidrogênio , Alginatos/química , Sulfatos/química , Bactérias/metabolismo , Temperatura , Géis/química , Carboximetilcelulose Sódica/química , Metais Pesados/química , Metais Pesados/isolamento & purificação , Poluentes Químicos da Água/química , Poluentes Químicos da Água/isolamento & purificaçãoRESUMO
BACKGROUND: Better utilization of rape straw can provide alternative strategies for sustainable ruminant and food production. The research reported here investigated changes in the carbohydrate composition of rape straw as a result of mixed ensiling with whole-crop corn or inoculated with nitrate, and the consequent effects on ruminal fermentation through in vitro batch culture. The three treatments included: rape straw and corn silage (RSTC), and ensiling treatment of rape straw with whole-crop corn (RSIC) or with calcium nitrate inoculation (RSICN). RESULTS: Ensiling treatment of rape straw and whole-crop corn or plus nitrate enriched lactic acid bacteria and lactate. The treatments broke the fiber surface connections of rape straw, leading to higher neutral detergent soluble (NDS) content and lower fiber content. Ensiling treatments led to greater (P < 0.05) dry matter degradation (DMD), molar proportions of propionate and butyrate, relative abundance of the phylum Bacteroidetes and genus Prevotella, and lower (P < 0.05) methane production in terms of g kg-1 DMD, molar proportions of acetate, and lower acetate to propionate ratio than the RSTC treatment. The RSICN treatment led to the lowest (P < 0.05) hydrogen concentration and methane production among the three treatments. CONCLUSION: Ensiling treatments of rape straw and whole-crop corn destroy the micro-structure of rape straw, promote substrate degradation by enriching the phylum Bacteroidetes and the genus Prevotella, and decrease methane production by favoring propionate and butyrate production. Nitrate inoculation in the ensiling treatment of rape straw and whole-crop corn further decreases methane production without influencing substrate degradation by providing an additional hydrogen sink. © 2023 Society of Chemical Industry.
Assuntos
Nitratos , Propionatos , Animais , Propionatos/metabolismo , Fermentação , Nitratos/metabolismo , Rúmen/metabolismo , Carboidratos , Silagem/análise , Butiratos/metabolismo , Acetatos , Metano/metabolismo , Hidrogênio/metabolismo , Zea mays/química , Digestão , DietaRESUMO
Based on the characteristics of commodity polymers in large quantities and low costs, modification of existing commodity polymers emerges as the most effective approach for exploring novel materials. Nevertheless, conventional modification methods typically involve high-energy processes (e.g., high temperature, high-energy radiation), which may lead to irreversible detrimental effects on the polymers, contradicting the desired performance enhancement through modification. In this work, we propose a carbene-mediated postpolymerization modification (PPM) strategy utilizing diazo compounds. Under photochemical or thermal activation conditions, insertion of the C-H bond can be achieved without compromising the performance of polymers. These diazo compounds can be easily synthesized in just two steps and applied to all C-H-containing polymers. This practical and effective modification strategy offers new opportunities and possibilities for enhancing the value and expanding the applications of polymers.