Jahn-Teller Distortions Induced by in situ Li Migration in λ-MnO2 for Boosting Electrocatalytic Nitrogen Fixation.

Lithium-mediated electrochemical nitrogen reduction reaction (Li-NRR) completely eschews the competitive hydrogen evolution reaction (HER) occurred in aqueous system, whereas the continuous deposition of lithium readily blocks the active sites and further reduces the reaction kinetics. Herein, we propose an innovative in situ Li migration strategy to realize that Li substitutes Mn sites in λ-MnO2 instead of evolving into the dead Li. Comprehensive characterizations corroborate that the intercalation of Li+ at high voltage breaks the structural integrity of MnO6 octahedron and further triggers unique Jahn-Teller distortions, which promotes the spin state regulation of Mn sites to generate the ameliorative eg orbital configuration and accelerates N≡N bond cleavage via eg -σ and eg -π* interaction. To this end, the resulted cationic disordered LiMnO4 delivers the recorded highest NH3 yield rate of 220 µg h-1 cm-2 and a Faradaic efficiency (FE) 83.80 % in organic electrolyte.

Unveiling Electrochemical Urea Synthesis by Co-Activation of CO2 and N2 with Mott-Schottky Heterostructure Catalysts.

Electrocatalytic C-N bond coupling to convert CO2 and N2 molecules into urea under ambient conditions is a promising alternative to harsh industrial processes. However, the adsorption and activation of inert gas molecules and then the driving of the C-N coupling reaction is energetically challenging. Herein, novel Mott-Schottky Bi-BiVO4 heterostructures are described that realize a remarkable urea yield rate of 5.91 mmol h-1 g-1 and a Faradaic efficiency of 12.55 % at -0.4 V vs. RHE. Comprehensive analysis confirms the emerging space-charge region in the heterostructure interface not only facilitates the targeted adsorption and activation of CO2 and N2 molecules on the generated local nucleophilic and electrophilic regions, but also effectively suppresses CO poisoning and the formation of endothermic *NNH intermediates. This guarantees the desired exothermic coupling of *N=N* intermediates and generated CO to form the urea precursor, *NCON*.

Advances in Catalysts for Urea Electrosynthesis Utilizing CO2 and Nitrogenous Materials: A Mechanistic Perspective.

Electrocatalytic urea synthesis from CO2 and nitrogenous substances represents an essential advance for the chemical industry, enabling the efficient utilization of resources and promoting sustainable development. However, the development of electrocatalytic urea synthesis has been severely limited by weak chemisorption, poor activation and difficulties in C-N coupling reactions. In this review, catalysts and corresponding reaction mechanisms in the emerging fields of bimetallic catalysts, MXenes, frustrated Lewis acid-base pairs and heterostructures are summarized in terms of the two central mechanisms of molecule-catalyst interactions as well as chemical bond cleavage and directional coupling, which provide new perspectives for improving the efficiency of electrocatalytic synthesis of urea. This review provides valuable insights to elucidate potential electrocatalytic mechanisms.

Insight into the Mechanism of Cobalt-Nickel Separation Using DFT Calculations on Ethylenediamine-Modified Silica Gel.

The separation of Co(II) and Ni(II) from leaching solution is gaining interest because Co(II) and Ni(II) are increasingly used in emerging strategic areas, such as power batteries. Herein, the surface of silica gel is functionalized with 1,2-ethylenediamine and used for the separation of Co(II) and Ni(II). The Co(II) removal efficiency of the modified silica is 80.2%, with a 4-fold improvement in the separation factor. The geometry, frequency, and electrostatic potential of the ethylenediamine modified silica gel (en/SG) are calculated. The corresponding properties of M2+ (M-Co, Ni) adsorbed on en/SG in an aqueous solution are simulated and analyzed. The results show that ethylenediamine tends to form [Men(H2O)4]2+ after binding to M2+, and the binding ability of Co(II) to ethylenediamine is stronger. Besides, the thermodynamic calculations show that en/SG has a more negative Gibbs free energy when absorbing Co(II) in aqueous solution, so en/SG is more inclined to bind with Co(II) preferentially. It is the difference in complexation ability between Ni, Co, and ethylenediamine that enlarges the difference in the original physical adsorption, thus strengthening the separation performance. This work will provide guidance for a rational design of high-performance nickel-cobalt adsorption materials.

Challenges and Solutions for Low-Temperature Lithium-Sulfur Batteries: A Review.

The lithium-sulfur (Li-S) battery is considered to be one of the attractive candidates for breaking the limit of specific energy of lithium-ion batteries and has the potential to conquer the related energy storage market due to its advantages of low-cost, high-energy density, high theoretical specific energy, and environmental friendliness issues. However, the substantial decrease in the performance of Li-S batteries at low temperatures has presented a major barrier to extensive application. To this end, we have introduced the underlying mechanism of Li-S batteries in detail, and further concentrated on the challenges and progress of Li-S batteries working at low temperatures in this review. Additionally, the strategies to improve the low-temperature performance of Li-S batteries have also been summarized from the four perspectives, such as electrolyte, cathode, anode, and diaphragm. This review will provide a critical insight into enhancing the feasibility of Li-S batteries in low-temperature environments and facilitating their commercialization.

Rational design of artificial Lewis pairs coupling with polyethylene glycol for efficient electrochemical ammonia synthesis.

Ammonia (NH3) synthesis at mild conditions by electrocatalytic nitrogen reduction (eNRR) has received more attention and has been regarded as a promising alternative to the traditional Haber-Bosch process. Lewis acid-base pairs (LPs) can chemisorb and react with nitrogen by electronic interaction, while the tuning of the microenvironment near electrode can hinder hydrogen evolution reaction (HER) thus improving the selectivity of the eNRR. Herein, the FeOOH nanorod coupled with LPs on the surface (i.e., Fe, Fe-O) was synthesized, which could effectively drive eNRR. Meanwhile, polyethylene glycol (PEG) was introduced to serve as a local non-aqueous electrolyte system to inhibit HER. The prepared FeOOH-150 catalyst achieved outstanding eNRR performance with an NH3 yield rate of 118.07 µg h-1mgcat-1 and a Faradaic efficiency of 51.4 % at -0.6 V vs. RHE in 0.1 M LiClO4 + 20 % PEG. Both the experiment and DFT calculations revealed that the interaction of PEG with Lewis base sites could optimize nitrogen adsorption configuration and activation.

Tailored nitrogen-defect induced by diels-alder reaction for enhanced electrochemical hydrogen evolution reaction.

Electrocatalytic water splitting in an alkaline medium is recognized as the promising technology to sustainably generate clean hydrogen energy via hydrogen evolution reaction (HER), while the sluggish water dissociation and subsequent *H adsorption steps greatly retarded the reaction kinetics and efficiency of the overall hydrogen evolution process. Whilst nitrogen (N)-doped carbon-based materials are attractive candidates for promoting HER activity, the facile fabrication and gaining a deeper insight into the electrocatalytic mechanism are still challenging. Herein, inspired by the Diels-Alder reaction, we precisely tailored six-membered pyridinic N and five-membered pyrrolic N sites at the edge of the carbon substrates. Comprehensive analysis validates that the participation of pyridinic N (electron-withdrawing) and pyrrolic N (electron-releasing) will induce the charge rearrangements, and further generate local electrophilic and nucleophilic domains in adjacent carbon rings, which guarantees the occurrence of water dissociation to generate protons and the subsequent adsorption of *H intermediates through electrostatic interactions, thereby facilitating the overall reaction kinetics. To this end, the optimal NC-ZnCl2-25 % electrocatalysts present excellent alkaline HER activity (η10 = 45 mV, Tafel slop of 37.7 mV dec-1) superior to commercial Pt/C.

InOOH as an efficient bidirectional catalyst for accelerated polysulfides conversion to enable high-performance lithium-sulfur batteries.

Lithium-sulfur (Li-S) batteries with the prominent advantages are greatly expected to be the attractive alternatives in the next-generation energy-storage systems. However, the practical success of Li-S batteries suffers from the shuttle effect and depressed redox kinetics of polysulfides. Herein, for the first time, InOOH nanoparticles are employed as a potent catalytic additive in sulfur electrode to overcome these issues. As demonstrated by the theoretical and experimental results, the strong interactions between the InOOH nanoparticles and sulfur species enable the effective adsorption of polysulfides. More significantly, InOOH nanoparticles not only effectively expedite the reduction of sulfur during the discharge process, but also dramatically accelerate the oxidation of Li2S during the charge process, presenting the marvelous bidirectional catalytic effects. Benefited from these distinctive superiorities, the cells with InOOH nanoparticles harvest an excellent capacity retention of 69.5% over 500 cycles at 2C and a commendable discharge capacity of 891 mAh g-1 under a high-sulfur loading of 5.0 mg cm-2. The detailed investigations in this work provide a novel insight to ameliorate the Li-S electrochemistry by the bidirectional catalyst for high-performance Li-S batteries.

Boosted polysulfides regulation by iron carbide nanoparticles-embedded porous biomass-derived carbon toward superior lithium-sulfur batteries.

Lithium-sulfur (Li-S) batteries are greatly expected to be the favored alternatives in the next-generation energy-storage technologies due to their exceptional advantages. However, the shuttle effect and sluggish reaction kinetics of polysulfides largely hamper the practical success of Li-S batteries. Herein, a unique iron carbide (Fe3C) nanoparticles-embedded porous biomass-derived carbon (Fe3C-PBC) is reported as the excellent immobilizer and promoter for polysulfides regulation. Such a distinctive composite strongly couples the vast active sites of Fe3C nanoparticles and the conductive network of porous biomass-derived carbon. Therefore, Fe3C-PBC is endowed with outstanding adsorptivity and catalytic effect toward inhibiting the shuttle effect and facilitating the redox kinetics of polysulfides, demonstrated by the detailed experimental demonstrations and theoretical calculation. With these synergistic effects, the Fe3C-PBC/S electrode embraces a superb capacity retention of 82.7% at 2C over 500 cycles and an excellent areal capacity of 4.81 mAh cm-2 under the high-sulfur loading of 5.2 mg cm-2. This work will inspire the design of advanced hosts based on biomass materials for polysulfides regulation in pursuing the superior Li-S batteries.

Cr-Doped Pd Metallene Endows a Practical Formaldehyde Sensor New Limit and High Selectivity.

Electrochemical sensors for detecting micromolecule organics are desirable for improving the perception of environmental quality and human health. However, currently, the electrochemical sensors for formaldehyde are substantially limited on the market due to the long-term unsolved problems of the low electrooxidation efficiency and CO poisoning issue of commercial Pd catalysts. Here, a 2D Cr-doped Pd metallene (Cr-Pdene) with few atomic layers is shown as an advanced catalyst for ultrasensitive and selective sensing of formaldehyde via a highly efficient formaldehyde electrooxidation. It is found that the doping of Cr into Pd metallene can efficiently optimize the electronic structure of Pd and weaken the interaction between Pd and CO, providing an anti-poisoning means to favor CO2 production and suppress CO adsorption. The Cr-Pdene-based electrochemical sensor exhibits one order of magnitude higher detection range and, especially, much higher anti-interference for formaldehyde than that of the conventional sensors. Most importantly, it is demonstrated that the Cr-Pdene can be integrated into commercializable wireless sensor networks or handheld instruments for promising applications relating to the environment, health, and food.

Trimetallic synergy in dendritic intermetallic PtSnBi nanoalloys for promoting electrocatalytic alcohol oxidation.

Developing effective and robust novel electrocatalysts for direct alcohol fuel cells has been gaining much attention. However, the widely used Pt catalyst suffers from limitations including the sluggish kinetics, severe CO poisoning, and catalyst lost caused by aggregation and Ostwald ripening during alcohol oxidation reaction. Herein, dendritic intermetallic PtSnBi nanoalloys were synthesized via a facile hydrothermal approach with high electrocatalytic performance and enhanced CO resistance for methanol oxidation reaction (MOR) and ethanol oxidation reaction (EOR) owing to the synergism of the chosen three elements and unique three-dimensional morphology. Specifically, the PtSnBi nanoalloys display 4.6 and 6.7 times higher of mass activity (7.02 A mg-1Pt) and specific activity (16.65 mA cm-2) toward MOR than those of commercial Pt/C, respectively. The mass activity of PtSnBi nanoalloys still retains 75.7% of the initial value after 800 cycles of stability test, superior to Pt/C (38.0%). The dual-functional effect of Sn, optimized electronic structure by the ligand effect, and unique atomic arrangement are responsible for the enhanced MOR activity and stability of PtSnBi nanoalloys. Furthermore, the PtSnBi nanoalloys with highlighted anti-CO poisoning capacity also improve the electrocatalytic performance toward EOR, indicating their great promise as broad energy electrocatalysts.

Donor-Acceptor Couples of Metal and Metal Oxides with Enriched Ni3+ Active Sites for Oxygen Evolution.

Exploiting precious-metal-free and high-activity oxygen evolution reaction (OER) electrocatalysts has been in great demands toward many energy storage and conversion processes, for example, carbon dioxide reduction, metal-air batteries, and water splitting. In this study, the simple solid-state method is employed for coupling Ni (electron donors) with lower-Fermi-level MoO2 or WOx (electron acceptors) into donor-acceptor ensembles with well-designed interfaces as robust electrocatalysts for OER. The resulting Ni/MoO2 and Ni/WOx electrocatalysts exhibit smaller overpotentials of 287 and 333 mV at 10 mA cm-2 as well as smaller Tafel slopes of 51 and 65 mV/dec, respectively, with respect to the single Ni, MoO2, WOx, and even the benchmark RuO2 in 1 M KOH. Specially, on account of a higher Fermi level of Ni in comparison with MoO2 and WOx, their strong electronic interaction results in directional interfacial electron transfer and increases the hole density over Ni, dramatically enriching the population of high-valence Ni3+ active sites and decreasing the Fermi level of Ni. The existence of Ni3+ can strengthen the chemisorption of OH-, and the downshift of the Ni Fermi level can significantly expedite migration of electrons toward the surface of catalysts during OER, thus synergistically boosting the OER catalytic performance. Furthermore, the inner Ni/MoO2 and Ni/WOx heterostructures and the electrochemically induced surface layers of oxides/hydroxides collectively boost the OER kinetics. This study highlights the importance of designing highly efficient OER electrocatalysts with high-valence active species (Ni3+) and better matched energy levels induced by the work function difference through interfacial engineering.

Electrochemical C-N coupling with perovskite hybrids toward efficient urea synthesis.

Electrocatalytic C-N coupling reaction by co-activation of both N2 and CO2 molecules under ambient conditions to synthesize valuable urea opens a new avenue for sustainable development, while the actual catalytic activity is limited by poor adsorption and coupling capability of gas molecules on the catalyst surface. Herein, theoretical calculation predicts that the well-developed built-in electric field in perovskite hetero-structured BiFeO3/BiVO4 hybrids can accelerate the local charge redistribution and thus promote the targeted adsorption and activation of inert N2 and CO2 molecules on the generated local electrophilic and nucleophilic regions. Thus, a BiFeO3/BiVO4 heterojunction is designed and synthesized, which delivers a urea yield rate of 4.94 mmol h-1 g-1 with a faradaic efficiency of 17.18% at -0.4 V vs. RHE in 0.1 M KHCO3, outperforming the highest values reported as far. The comprehensive analysis further confirms that the local charge redistribution in the heterojunction effectively suppresses CO poisoning and the formation of the endothermic *NNH intermediate, which thus guarantees the exothermic coupling of *N[double bond, length as m-dash]N* intermediates with the generated CO via C-N coupling reactions to form the urea precursor *NCON* intermediate. This work opens a new avenue for effective electrocatalytic C-N coupling under ambient conditions.

Investigation of MOF-derived humidity-proof hierarchical porous carbon frameworks as highly-selective toluene absorbents and sensing materials.

Carbon frameworks (CFs) derived from metal-organic frameworks (MOFs) have been produced as adsorbents of toluene. To further obtain optimum hierarchical porous carbon structure of CFs, different treatment temperatures were applied to a typical kind of MOFs (ZIF-8). The adsorption capacity of the toluene of hierarchical porous CFs obtained from ZIF-8 under 1100 °C (CF-1100, adsorption capacity of 208.5 mg/g) was higher than that of other carbonization temperature and MOFs. Impressively, the adsorbent CF-1100 also exhibited strong hydrophobicity, low desorption temperature, and good selectivity to toluene. The adsorption capacity decreased by only 10.4% under wet condition compared with the dry condition, standing on the top of the recently reported adsorbents. The impressive adsorption performance of CF-1100 is attributed to the larger specific surface area (1024 m2/g) and pore volume (0.497 cm3/g), newly generated micropores (pore width is 0.6-0.8 nm) and mesopores (pore width above 10 nm), and carbonaceous structure with higher degree of graphitization. Based on the adequate adsorption performance, CF-1100 coated quartz crystal microbalances as sensor also showed a high sensitivity of 0.4004 Hz/ppm and small relative standard deviations of 1.0745% for toluene sensing. This contribution provides a foundation for optimizing potential adsorbents and sensing materials for air pollution abatement.

Atomically Dispersed Indium Sites for Selective CO2 Electroreduction to Formic Acid.

An atomically dispersed structure is attractive for electrochemically converting carbon dioxide (CO2) to fuels and feedstock due to its unique properties and activity. Most single-atom electrocatalysts are reported to reduce CO2 to carbon monoxide (CO). Herein, we develop atomically dispersed indium (In) on a nitrogen-doped carbon skeleton (In-N-C) as an efficient catalyst to produce formic acid/formate in aqueous media, reaching a turnover frequency as high as 26771 h-1 at -0.99 V relative to a reversible hydrogen electrode (RHE). Electrochemical measurements show that trace amounts of In loaded on the carbon matrix significantly improve the electrocatalytic behavior for the CO2 reduction reaction, outperforming conventional metallic In catalysts. Further experiments and density functional theory (DFT) calculations reveal that the formation of intermediate *OCHO on isolated In sites plays a pivotal role in the efficiency of the CO2-to-formate process, which has a lower energy barrier than that on metallic In.

Efficient Tetra-Functional Electrocatalyst with Synergetic Effect of Different Active Sites for Multi-Model Energy Conversion and Storage.

Energy crisis and global warming due to excessive CO2 emissions are the two major challenges of the world. Conversion of CO2 into useful fuels along with rechargeable metal air batteries and water splitting is one way to combat the energy crisis, which is bottlenecked due to the lack of multifunctional electrocatalyst. Herein simple but multifunctional electrocatalyst, which combined CoNi nanoalloy, N-doped carbon nanotubes, and single atomic Ni sites together is reported. The prepared electrocatalyst has shown remarkable performance for CO2RR, ORR, OER, and HER. The practical utilization of the catalyst is mansifested by a dual model metal CO2/air battery and water electrolyzer. An excellent CO2RR with FE of 99% is achieved in 0.5 M KHCO3 medium. The catalyst exhibits more positive onset (0.98 V) and half wave potential (0.86 V) than Pt/C for ORR, extremely low overpotential (η10) of 250 mV for OER, and thus the lowest ORR/OER potential gap of 0.62 V. In alkaline medium, the catalyst also shows excellent HER performance with η10 of 49 mV, resulting in the smallest cell bias of 1.57 V for overall water splitting to date. This work provides a new pathway to design more stellar multifunctional electrocatalyst for sustainable and clean renewable energy technology.

Facile synthesis of a bismuth nanostructure with enhanced selectivity for electrochemical conversion of CO2 to formate.

Electrochemically converting carbon dioxide (CO2) to formate offers a promising approach for energy conversion and storage. Bismuth is believed to be one of the promising candidates for CO2 electroreduction, but the poor selectivity and complexity of synthesis limit its real application on a large scale. In this work, a facile one-step-reduction method was developed to prepare a bismuth nanostructure in aqueous solution. Owing to its enhanced reactive sites and exposed crystal plane, the prepared Bi nanostructure exhibits excellent performance for CO2 electroreduction, which reaches the maximum faradaic efficiency for formate as high as 92% at a potential of -0.9 V versus a reversible hydrogen electrode. Additionally, the large current density and remarkable durability also reveal its high intrinsic CO2 electroreduction activity. The density functional theory calculation confirms that the formation of intermediate *OCHO that finally converts to formate is thermodynamically favorable on Bi high-index planes. We anticipate that such a facile synthesis strategy and excellent electrocatalytic performance of the Bi nanostructure will be easy to scale up, realizing its industrialization applications in CO2 electrochemical conversion.

Tuning carbon nanotube-grafted core-shell-structured cobalt selenide@carbon hybrids for efficient oxygen evolution reaction.

The electrochemical oxygen evolution reaction (OER) is sparked extensive interest in efficient energy storage and conversion. Cobalt Selenide (CoSe2) is believed to be one of the promising candidates for OER based on Yang Shao-Horn's principle. However, owing to low exposure of active sites and/or low efficiency of electron transfer, the electrocatalytic activity of CoSe2 is far less than expected. In this work, a novel carbon nanotubes (CNT) grafted 3D core-shell structured CoSe2@C-CNT nanohybrid is developed by a general hydrothermal-calcination strategy. Zeolite imidazole frameworks (ZIF) was used as the precursor to synthesis of the materials. It is found that both the calcination temperature and the selenium content can significantly regulate the catalytic performance of the hybrids. The obtained best catalysts requires the overpotential of only 306 mV and 345 mV to reach a current density of 10 mA cm-2 and 50 mA cm-2 in 1.0 MKOH medium, respectively. It also exhibits a small Tafel slope of 46 mV dec-1 and excellent durability, which is superior to most of recently reported CoSe2-based and Co-based materials. These superior performances can be ascribed to synergistic effects of the highly active CoSe2 nanostructure, defect carbon species and the carbon nanotubes exist in the catalyst. Besides, the unique morphology leads to large electrochemical surface area of the catalyst, which is in favor of the exposure of active sites for OER. Due to high efficiency, low cost and excellent durability for OER, the prepared catalysts showed can be potentially used to substitute noble metals utilized in related energy storage and conversion devices.

Synthesis of polyoxometalates derived bifunctional catalyst towards efficient overall water splitting in neutral and alkaline medium.

The development of efficient hydrogen evolution and oxygen evolution reactions bifunctional electrocatalyst for overall water splitting is highly desired but still a great challenge, especially under neutral condition. With the unique properties of polyoxometalate and MOFs materials as well as rich transition metal contents, herein we successfully synthesize a novel bi-phase structure of cobalt and molybdenum carbide coated with nitrogen-doped graphite (Co-Mo2C@NC) which possesses excellent activity as water splitting electrocatalyst at neutral pH. This noble metal-free, bi-phase electrocatalyst exhibits Hydrogen Evolution Reaction (HER) and Oxygen Evolution Reaction (OER) overpotentials of 260 mV and 440 mV at 10 mA cm-2, respectively. The two-electrode system using Co-Mo2C@NC as both the anode and cathode drives 10 mA cm-2 at a cell voltage of 1.83 V with a remarkable long-term stability. Besides, the Co-Mo2C@NC also shows promising activity in alkaline condition that reaches 10 mA cm-2 at a cell voltage of 1.66 V. This work paves a new avenue to the design of the unique, economic and promising non-noble metal electrode materials for practical applications in the electrochemical energy storage and conversion devices.