Life Cycle Analysis of Fischer-Tropsch Diesel Produced by Tri-Reforming and Fischer-Tropsch Synthesis (TriFTS) of Landfill Gas.

Renewable liquid fuels production from landfill waste provides a promising alternative to conventional carbon-intensive waste management methods and has the potential to contribute to the transition toward low-carbon fuel pathways. In this work, we investigated the life cycle greenhouse gas (GHG) emissions of producing Fischer-Tropsch diesel from landfill gas (LFG) using the TriFTS catalytic conversion process and compared it to fossil-based petroleum diesel. A life cycle-based comparison was made between TriFTS diesel and other LFG waste management pathways, LFG-to-Electricity and LFG-to-Compressed renewable natural gas (RNG), on a per kilogram of feedstock basis as well as on a per MJ of energy basis, which also included the LFG-to-Direct Combustion pathway. The study considered flaring of LFG as the common underlying counterfactual scenario for all of the waste-to-energy product pathways. We estimated the life cycle GHG emissions for TriFTS diesel to be -36.4 carbon dioxide equivalent (grams CO2e)/MJ which is significantly lower than its fossil fuel counterpart which was estimated to be 90.5 g CO2e/MJ on a cradle-to-grave basis. The life cycle emission results from both perspectives (per kg feedstock and per MJ energy output) show that TriFTS diesel is a viable alternative energy pathway from LFG when compared to other pathways, primarily due to the main product being a renewable fuel that can serve as a drop-in fuel for diesel-based uses, within both the waste industry as well as the larger market. Further sensitivity analysis was performed based on the production of TriFTS diesel with the counterfactual waste management scenario of LFG-to-Flaring as well as the alternative LFG-to-Electricity waste management pathway. The sensitivity of the carbon intensity for TriFTS diesel to flaring efficiency and the carbon intensity of the electricity grid were also investigated. The study highlights the potential for the TriFTS conversion process technology to contribute to the waste industry's closed loop and decarbonization initiatives and to provide low carbon fuel for transportation.

Comparing Life-Cycle Emissions of Biofuels for Marine Applications: Hydrothermal Liquefaction of Wet Wastes, Pyrolysis of Wood, Fischer-Tropsch Synthesis of Landfill Gas, and Solvolysis of Wood.

Recent restrictions on marine fuel sulfur content and a heightened regulatory focus on maritime decarbonization are driving the deployment of low-carbon and low-sulfur alternative fuels for maritime transport. In this study, we quantified the life-cycle greenhouse gas and sulfur oxide emissions of several novel marine biofuel candidates and benchmarked the results against the emissions reduction targets set by the International Maritime Organization. A total of 11 biofuel pathways via four conversion processes are considered, including (1) biocrudes derived from hydrothermal liquefaction of wastewater sludge and manure, (2) bio-oils from catalytic fast pyrolysis of woody biomass, (3) diesel via Fischer-Tropsch synthesis of landfill gas, and (4) lignin ethanol oil from reductive catalytic fractionation of poplar. Our analysis reveals that marine biofuels' life-cycle greenhouse gas emissions range from -60 to 56 gCO2e MJ-1, representing a 41-163% reduction compared with conventional low-sulfur fuel oil, thus demonstrating a considerable potential for decarbonizing the maritime sector. Due to the net-negative carbon emissions from their life cycles, all waste-based pathways showed over 100% greenhouse gas reduction potential with respect to low-sulfur fuel oil. However, while most biofuel feedstocks have a naturally occurring low-sulfur content, the waste feedstocks considered here have higher sulfur content, requiring hydrotreating prior to use as a marine fuel. Combining the break-even price estimates from a published techno-economic analysis, which was performed concurrently with this study, the marginal greenhouse gas abatement cost was estimated to range from -$120 to $370 tCO2e-1 across the pathways considered. Lower marginal greenhouse gas abatement costs were associated with waste-based pathways, while higher marginal greenhouse gas abatement costs were associated with the other biomass-based pathways. Except for lignin ethanol oil, all candidates show the potential to be competitive with a carbon credit of $200 tCO2e-1 in 2016 dollars, which is within the range of prices recently received in connection with California's low-carbon fuel standard.

Techno-economic Analysis of Sustainable Biofuels for Marine Transportation.

Renewable, low-carbon biofuels offer the potential opportunity to decarbonize marine transportation. This paper presents a comparative techno-economic analysis and process sustainability assessment of four conversion pathways: (1) hydrothermal liquefaction (HTL) of wet wastes such as sewage sludge and manure; (2) fast pyrolysis of woody biomass; (3) landfill gas Fischer-Tropsch synthesis; and (4) lignin-ethanol oil from the lignocellulosic ethanol biorefinery utilizing reductive catalytic fractionation. These alternative marine biofuels have a modeled minimum fuel selling price between $1.68 and $3.98 per heavy fuel oil gallon equivalent in 2016 U.S. dollars based on a mature plant assessment. The selected pathways also exhibit good process sustainability performance in terms of water intensity compared to the petroleum refineries. Further, the O and S contents of the biofuels vary widely. While the non-HTL biofuels exhibit negligible S content, the raw biocrudes via HTL pathways from sludge and manure show relatively high S contents (>0.5 wt %). Partial or full hydrotreatment can effectively lower the biocrude S content. Additionally, co-feeding with other low-sulfur wet wastes such as food waste can provide another option to produce raw biocrude with lower S content to meet the target with further hydrotreatment. This study indicates that biofuels could be a cost-effective fuel option for the marine sector. Marine biofuels derived from various feedstocks and conversion technologies could mitigate marine biofuel adoption risk in terms of feedstock availability and biorefinery economics.

Characterizing Regional Methane Emissions from Natural Gas Liquid Unloading.

A "bottom-up" probabilistic model was developed using engineering first-principles to quantify annualized throughput normalized methane emissions (TNME) from natural gas liquid unloading activities for 18 basins in the United States in 2016. For each basin, six discrete liquid-unloading scenarios are considered, consisting of combinations of well types (conventional and unconventional) and liquid-unloading systems (nonplunger, manual plunger lift, and automatic plunger lift). Analysis reveals that methane emissions from liquids unloading are highly variable, with mean TNMEs ranging from 0.0093% to 0.38% across basins. Automatic plunger-lift systems are found to have significantly higher per-well methane emissions rates relative to manual plunger-lift or non-plunger systems and on average constitute 28% of annual methane emissions from liquids unloading over all basins despite representing only ∼0.43% of total natural gas well count. While previous work has advocated that operational malfunctions and abnormal process conditions explain the existence of super-emitters in the natural gas supply chain, this work finds that super-emitters can arise naturally due to variability in underlying component processes. Additionally, average cumulative methane emissions from liquids unloading, attributed to the natural gas supply chain, across all basins are ∼4.8 times higher than those inferred from the 2016 Greenhouse Gas Reporting Program (GHGRP). Our new model highlights the importance of technological disaggregation, uncertainty quantification, and regionalization in estimating episodic methane emissions from liquids unloading. These insights can help reconcile discrepancies between "top-down" (regional or atmospheric studies) and "bottom-up" (component or facility-level) studies.

Biofuels via Fast Pyrolysis of Perennial Grasses: A Life Cycle Evaluation of Energy Consumption and Greenhouse Gas Emissions.

A well-to-wheel (WTW) life cycle assessment (LCA) model is developed to evaluate the environmental profile of producing liquid transportation fuels via fast pyrolysis of perennial grasses: switchgrass and miscanthus. The framework established in this study consists of (1) an agricultural model used to determine biomass growth rates, agrochemical application rates, and other key parameters in the production of miscanthus and switchgrass biofeedstock; (2) an ASPEN model utilized to simulate thermochemical conversion via fast pyrolysis and catalytic upgrading of bio-oil to renewable transportation fuel. Monte Carlo analysis is performed to determine statistical bounds for key sustainability and performance measures including life cycle greenhouse gas (GHG) emissions and Energy Return on Investment (EROI). The results of this work reveal that the EROI and GHG emissions (gCO2e/MJ-fuel) for fast pyrolysis derived fuels range from 1.52 to 2.56 and 22.5 to 61.0 respectively, over the host of scenarios evaluated. Further analysis reveals that the energetic performance and GHG reduction potential of fast pyrolysis-derived fuels are highly sensitive to the choice of coproduct scenario and LCA allocation scheme, and in select cases can change the life cycle carbon balance from meeting to exceeding the renewable fuel standard emissions reduction threshold for cellulosic biofuels.

Microalgal biomass production pathways: evaluation of life cycle environmental impacts.

BACKGROUND: Microalgae are touted as an attractive alternative to traditional forms of biomass for biofuel production, due to high productivity, ability to be cultivated on marginal lands, and potential to utilize carbon dioxide (CO2) from industrial flue gas. This work examines the fossil energy return on investment (EROIfossil), greenhouse gas (GHG) emissions, and direct Water Demands (WD) of producing dried algal biomass through the cultivation of microalgae in Open Raceway Ponds (ORP) for 21 geographic locations in the contiguous United States (U.S.). For each location, comprehensive life cycle assessment (LCA) is performed for multiple microalgal biomass production pathways, consisting of a combination of cultivation and harvesting options. RESULTS: Results indicate that the EROIfossil for microalgae biomass vary from 0.38 to 1.08 with life cycle GHG emissions of -46.2 to 48.9 (g CO2 eq/MJ-biomass) and direct WDs of 20.8 to 38.8 (Liters/MJ-biomass) over the range of scenarios analyzed. Further anaylsis reveals that the EROIfossil for production pathways is relatively location invariant, and that algae's life cycle energy balance and GHG impacts are highly dependent on cultivation and harvesting parameters. Contrarily, algae's direct water demands were found to be highly sensitive to geographic location, and thus may be a constraining factor in sustainable algal-derived biofuel production. Additionally, scenarios with promising EROIfossil and GHG emissions profiles are plagued with high technological uncertainty. CONCLUSIONS: Given the high variability in microalgae's energy and environmental performance, careful evaluation of the algae-to-fuel supply chain is necessary to ensure the long-term sustainability of emerging algal biofuel systems. Alternative production scenarios and technologies may have the potential to reduce the critical demands of biomass production, and should be considered to make algae a viable and more efficient biofuel alternative.