RESUMO
For improving the tribological behaviors of traditional Ti alloys, high-nickel Ti alloy with sinusoidal micropores was prepared by laser additive manufacturing (LAM). MgAl (MA), MA-graphite (MA-GRa), MA-graphenes (MA-GNs), and MA-carbon nanotubes (MA-CNTs) were respectively filled into the Ti-alloy micropores to prepare interface microchannels through high-temperature infiltration. In a ball-on-disk tribopair system, the tribological and regulating behaviors of the microchannels in Ti-base composites were elucidated. The results showed that the regulation functions of MA were noticeably improved at 420 °C, resulting in their superior tribological behaviors than those at other temperatures. It could be concluded that GRa, GNs, and CNTs combined with MA further enhanced the regulation behaviors compared to individual MA lubrication. The following regulation factors were responsible for the excellent tribological properties: the interlayer separation of graphite, which accelerated the plastic flow of MA, improved the interface crack self-healing of Ti-MA-GRa, and regulated the friction and wear resistance abilities. Compared with GRa, GNs were easier to slide, and helped to produce a greater deformation of MA, facilitating a good self-healing of cracks, and further enhancing the wear regulation of Ti-MA-GNs. CNTs showed good synergism with MA to allow the rolling friction, which effectively repaired the cracks to improve interface self-healing, resulting in a better tribological performance of Ti-MA-CNTs compared to Ti-MA-GRa and Ti-MA-GNs.
RESUMO
Over the past two decades, nanofillers have attracted significant interest due to their proven chemical, mechanical, and tribological performances. However, despite the significant progress realized in the application of nanofiller-reinforced coatings in various prominent fields, such as aerospace, automobiles and biomedicine, the fundamental effects of nanofillers on the tribological properties of coatings and their underlying mechanisms have rarely been explored by subdividing them into different sizes ranging from zero-dimensional (0D) to three-dimensional (3D) architectures. Herein, we present a systematic review of the latest advances on multi-dimensional nanofillers for enhancing the friction reduction and wear resistance of metal/ceramic/polymer matrix composite coatings. Finally, we conclude with an outlook for future investigations on multi-dimensional nanofillers in tribology, providing possible solutions for the key challenges in their commercial applications.
RESUMO
From our ordinary lives to various mechanical systems, friction and wear are often unavoidable phenomena that are heavily responsible for excessive expenditures of nonrenewable energy, the damages and failures of system movement components, as well as immense economic losses. Thus, achieving low friction and high anti-wear performance is critical for minimization of these adverse factors. Two-dimensional (2D) nanomaterials, including transition metal dichalcogenides, single elements, transition metal carbides, nitrides and carbonitrides, hexagonal boron nitride, and metal-organic frameworks have attracted remarkable interests in friction and wear reduction of various applications, owing to their atomic-thin planar morphologies and tribological potential. In this paper, we systematically review the current tribological progress on 2D nanomaterials when used as lubricant additives, reinforcement phases in the coatings and bulk materials, or a major component of superlubricity system. Additionally, the conclusions and prospects on 2D nanomaterials with the existing drawbacks, challenges and future direction in such tribological fields are briefly provided. Finally, we sincerely hope such a review will offer valuable lights for 2D nanomaterial-related researches dedicated on tribology in the future.