Nitrate Reduction by NiFe-LDH/CeO2: Understanding the Synergistic Effect between Dual-Metal Sites and Dual Adsorption.

Electrocatalytic nitrate reduction reaction (EC-NITRR) shows a significant advantage for green reuse of the nitrate (NO3-) pollutant. However, the slow diffusion reaction limits the reaction rate in practical EC-NITRR, causing an unsatisfactory ammonia (NH3) yield. In this work, a multifunctional NiFe-LDH/CeO2 with the dual adsorption effect (physisorption and chemisorption) and dual-metal sites (Ce3+ and Fe2+) was fabricated by the electrodeposition method. NiFe-LDH/CeO2 performed an expected ability of enrichment for NO3- through the pseudo-first-order and pseudo-second-order kinetic models, and the polymetallic structure provided abundant sites for effective reaction of NO3-. At-0.6 V vs RHE, the ammonia (NH3) yield of NiFe-LDH/CeO2 reached 335.3 µg h-1 cm-2 and the selectivity of NH3 was 24.2 times that of NO2-. The nitrogen source of NH3 was confirmed by 15NO3- isotopic labeling. Therefore, this work achieved the recycling of the NO3- pollutant by synergy of enrichment and catalysis, providing an alternative approach for the recovery of NO3- from wastewater.

Surface Reconstruction for Selective Oxidation of Tetrahydroisoquinoline.

Integration of hydrogen evolution with the oxidation of organic substances in one electrochemical system is highly desirable. However, achieving selective oxidation of organic substances in the integrated system is still highly challenging. In this study, a phosphorylated NiMoO4 nanoneedle-like array was designed as the catalytic active electrode for the integration of highly selective electrochemical dehydrogenation of tetrahydroisoquinolines (THIQs) with hydrogen production. The leaching of anions, including MoO42- and PO43-, facilitates the reconstruction of the catalyst. As a result, nickel oxyhydroxides with the doping of PO43- and richness of defects are in situ formed. In situ Raman and density functional theory calculations have shown that the high catalytic activity is attributed to the in situ formed PO43- involved NiOOH substance. In the dehydrogenation process, the involved C-H bond but not the N-H bond is first destroyed. A two-electrode system was then fabricated with the optimized electrode that shows a benchmark current density of 10 mA cm-2 at 1.783 V, providing a yield of 70% for dihydroisoquinolines. A robust stability was also shown for this integrated electrochemical system. The understanding of the reconstruction behavior and the achievement of selective dehydrogenation will provide some hints for electrochemical synthesis.

Breeding of high-tolerance yeast by adaptive evolution and high-gravity brewing of mutant.

BACKGROUND: Ethanol and osmotic stresses are the major limiting factors for brewing strong beer with high-gravity wort. Breeding of yeast strains with high osmotic and ethanol tolerance and studying very-high-gravity (VHG) brewing technology is of great significance for brewing strong beer. RESULTS: This study used an optimized microbial microdroplet culture (MMC) system for adaptive laboratory evolution (ALE) of Saccharomyces cerevisiae YN81 to improve its tolerance to osmotic and ethanol stress. Meanwhile, we investigated the VHG and VHG with added ethanol (VHGAE) brewing processes for the evolved mutants in brewing strong beer. The results showed that three evolved mutants were obtained; among them, the growth performance of YN81mc-8.3 under 300, 340, 380, 420 and 460 g L-1 sucrose stresses was greater than that of the other strains. The ethanol tolerance of YN81mc-8.3 was 12%, which was 20% higher than that of YN81. During strong-beer brewing in a 100 L cylindrical cone-bottom tank, the sugar utilization and ethanol yield of YN81mc-8.3 outperformed those of YN81 in both the VHG and VHGAE brewing processes. Measurement of the diacetyl concentration showed that YN81mc-8.3 had a stronger diacetyl reduction ability; in particular, the real degree of fermentation of beers brewed by YN81mc-8.3 in VHG and VHGAE brewing processes was 75.35% and 66.71%, respectively - higher than those of the two samples brewed by YN81. Meanwhile, the visual, olfactive and gustative properties of the strong beer produced by YN81mc-8.3 were better than those of the other beers. CONCLUSION: In this study, the mutant YN81mc-8.3 and the VHGAE brewing process were optimal and represented a better alternative strong-beer brewing process. © 2023 Society of Chemical Industry.

Branched Porous Ni3N as a Catalytic Electrode for Selective Semidehydrogenation of Tetrahydroisoquinoline.

Oxygen evolution in electrochemical water splitting needs a high overpotential that significantly reduces the energy efficiency. To explore an alternative anodic reaction to promote the production of hydrogen at the other end of water splitting and at the same time to get high-value-added chemicals is highly desirable. Herein, we demonstrate a novel branched porous Ni3N catalyst that is prepared for dehydrogenation of tetrahydroisoquinoline, which acts as an anodic oxidation reaction to promote H2 formation on the other end. Interestingly, the Ni3N catalytic electrode can induce effective semidehydrogenation with the selective formation of dihydroisoquinoline, which is difficult to be obtained by the usual direct synthesis route. The catalytic electrode exhibits a low potential of 1.55 V (vs RHE) for a catalytic current density of 61 mA cm-2 with dehydrogenation of tetrahydroisoquinoline and hydrogen production. In situ Raman spectra studies suggest that NiOOH is formed on the electrode surface, which mediates the oxidation semidehydrogenation process. This work also provides a strategy to fabricate nitride materials for applications beyond selective semidehydrogenation of tetrahydroisoquinoline.

Production of surfactant-stable keratinase from Bacillus cereus YQ15 and its application as detergent additive.

BACKGROUND: With the growing concern for the environment, there are trends that bio-utilization of keratinous waste by keratinases could ease the heavy burden of keratinous waste from the poultry processing and leather industry. Especially surfactant-stable keratinases are beneficial for the detergent industry. Therefore, the production of keratinase by Bacillus cereus YQ15 was improved; the characterization and use of keratinase in detergent were also studied. RESULTS: A novel alkaline keratinase-producing bacterium YQ15 was isolated from feather keratin-rich soil and was identified as Bacillus cereus. Based on the improvement of medium components and culture conditions, the maximum keratinase activity (925 U/mL) was obtained after 36 h of cultivation under conditions of 35 °C and 160 rpm. Moreover, it was observed that the optimal reacting temperature and pH of the keratinase are 60 °C and 10.0, respectively; the activity was severely inhibited by PMSF and EDTA. On the contrary, the keratinase showed remarkable stability in the existence of the various surfactants, including SDS, Tween 20, Tween 60, Tween 80, and Triton X-100. Especially, 5% of Tween 20 and Tween 60 increased the activity by 100% and 60%, respectively. Furtherly, the keratinase revealed high efficiency in removing blood stains. CONCLUSION: The excellent compatibility with commercial detergents and the high washing efficiency of removing blood stains suggested its suitability for potential application as a bio-detergent additive.

Gene cloning and molecular characterization of a thermostable chitosanase from Bacillus cereus TY24.

BACKGROUND: An important conceptual advance in health and the environment has been recognized that enzymes play a key role in the green processing industries. Of particular interest, chitosanase is beneficial for recycling the chitosan resource and producing chitosan oligosaccharides. Also, chitosan gene expression and molecular characterization will promote understanding of the biological function of bacterial chitosanase as well as explore chitosanase for utilizing chitosan resources. RESULTS: A chitosanase-producing bacterium TY24 was isolated and identified as Bacillus cereus. Moreover, the chitosanase gene was cloned and expressed in Escherichia coli. Sequence analysis reveals that the recombinant chitosanase (CHOE) belongs to the glycoside hydrolases 8 family. The purified CHOE has a molecular weight of about 48 kDa and the specific activity of 1150 U/mg. The optimal pH and temperature of CHOE were 5.5 and 65 °C, respectively. The enzyme was observed stable at the pH range of 4.5-7.5 and the temperature range of 30-65 °C. Especially, the half-life of CHOE at 65 °C was 161 min. Additionally, the activity of CHOE was remarkably enhanced in the presence of Mn2+, Cu2+, Mg2+ and K+, beside Ca2+ at 5 mM. Especially, the activity of CHOE was enhanced to more than 120% in the presence of 1% of various surfactants. CHOE exhibited the highest substrate specificity toward colloid chitosan. CONCLUSION: A bacterial chitosanase was cloned from B. cereus and successfully expressed in E. coli (BL21) DE3. The recombinant enzyme displayed good stability under acid pH and high-temperature conditions.

Upregulation of circFOXP1 attenuates inflammation and apoptosis induced by ox-LDL in human umbilical vein endothelial cells by regulating the miR-185-5p/BCL-2 axis.

The pathogenesis of coronary artery disease (CAD) is closely related to an abnormal function of the coronary arteries due to myocardial ischemia, hypoxia, or necrosis, which poses a threat to human health. Therefore, this study was conducted to evaluate the role of circFOXP1 in controlling endothelial cell function during atherosclerosis (AS), and further investigate its potential molecular mechanism of regulation. Through Starbase database analysis, we predicted that circFOXP1 can sponge miR-185-5p that targets BCL-2. We found that interleukin (IL)-6, tumor necrois factor (TNF)-α, and IL-1ß were significantly upregulated in high-fat diet (HFD)-induced apolipoprotein E-deficient (ApoE-/-) mice compared with those in the control mice. CircFOXP1 was also significantly upregulated in the AS-mice model and AS-cell model. Moreover, miR-185-5p overexpression was found to inhibit BCL-2 protein expression, which consequently reduced the proliferation, and increased the oxidized low-density lipoprotein (ox-LDL)-induced human umbilical vein endothelial cells (HUVECs) apoptotic rate. Taken together, our data show that circFOXP1 can further aggravate endothelial cell injury by regulating the miR-185-5p/BCL-2 signal axis.

Molecular Precursor Route to CuCo2S4 Nanosheets: A High-Performance Pre-Catalyst for Oxygen Evolution and Its Application in Zn-Air Batteries.

Development of high-efficiency non-precious metal-based electrocatalysts to drive the complex four-electron process of the oxygen evolution reaction (OER) is crucial for production of hydrogen and energy storage components. Herein, bimetallic CuCo2S4 nanosheets were created by a new molecular precursor route. The optimal CuCo2S4 catalyst demonstrates superior performance to catalyze the OER with excellent stability, which was confirmed by the low overpotential of 290 mV at 10 mA cm-2 in 1 M KOH. The catalytic activity can be maintained for at least 40 h. The catalyst after the OER was then detected. The results indicate that S-doped CoOOH/CuO nanosheets formed on the catalyst surface during the OER may act as the catalytic active substance. Furthermore, when employed as an air cathode in a Zn-air battery, it reveals a high open-cycle potential of 1.38 V and a peak power density of 123.9 mW cm-2. The performance of the rechargeable Zn-air battery is close to that fabricated with commercial precious metal-based electrocatalysts. These findings would furnish some guidelines for the design, development, and applications of bimetallic sulfide electrocatalysts for the OER.

A metallo-keratinase from a newly isolated Acinetobacter sp. R-1 with low collagenase activity and its biotechnological application potential in leather industry.

Microbial keratinase is a well-recognized enzyme that can specifically degrade insoluble keratins. A keratinase-producing bacterium was isolated from a duck ranch soil and identified as Acinetobacter sp. R-1 based on the biochemical characteristics and 16S rDNA gene sequencing. It showed high keratinase activity and low collagenase activity. The keratinase was purified to electrophoretic homogeneity with 6.69% recovery, 2.68-fold purification and an estimated molecular weight of 25 kDa. Additionally, the keratinase showed optimal activity at 50 °C and pH11. Keratinase activity of Acinetobacter sp. significantly increased in the presence of Li(+), Na(+), and Ca(2+), while it was completely inhibited by EDTA, indicating it was a metallo-keratinase. Moreover, the crude keratinase from Acinetobacter sp. R-1 could thoroughly depilate goat skin and simultaneously modify the wool surface, which indicated its applicable potential in leather and textile industries.

Biochemical Characterization of An Arginine-Specific Alkaline Trypsin from Bacillus licheniformis.

In the present study, we isolated a trypsin-producing strain DMN6 from the leather waste and identified it as Bacillus licheniformis through a two-step screening strategy. The trypsin activity was increased up to 140 from 20 U/mL through culture optimization. The enzyme was purified to electrophoretic homogeneity with a molecular mass of 44 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and the specific activity of purified enzyme is 350 U/mg with Nα-Benzoyl-L-arginine ethylester as the substrate. The optimum temperature and pH for the trypsin are 65 °C and pH 9.0, respectively. Also, the enzyme can be significantly activated by Ba(2+). This enzyme is relatively stable in alkaline environment and displays excellent activity at low temperatures. It could retain over 95% of enzyme activity after 180 min of incubation at 45 °C. The distinguished activity under low temperature and prominent stability enhance its catalytic potential. In the current work, the open reading frame was obtained with a length of 1371 nucleotides that encoded a protein of 456 amino acids. These data would warrant the B. licheniformis trypsin as a promising candidate for catalytic application in collagen preparation and leather bating through further protein engineering.

Effects of moxibustion with wheat-grain size cone at "Zusanli" (ST 36) on vascular injury and oxidative stress in high-fat diet rats through mTOR/HIF-1α/VEGF signaling pathway. / 基于mTOR/HIF-1α/VEGF信号通路探讨麦粒灸"足三里"å¯¹é«˜è„‚é¥®é£Ÿå¤§é¼ è¡€ç®¡æŸä¼¤å’Œæ°§åŒ–åº”æ¿€çš„å½±å“.

OBJECTIVES: To explore the effect mechanism of moxibustion with wheat-grain size cone at "Zusanli" (ST 36) on vascular injury and oxidative stress in hyperlipidemia through mammalian target of rapamycin (mTOR)/hypoxia inducible factor-1α (HIF-1α)/vascular endothelial growth factor (VEGF) signaling pathway. METHODS: Forty healthy male SD rats with SPF grade were randomly divided into a normal group, a model group, a moxibustion group, and an inhibitor group, with 10 rats in each one. The hyperlipidemia model was established by feeding a high-fat diet for 8 weeks in rats of the model group, the moxibustion group and the inhibitor group. The moxibustion with wheat-grain size cone was delivered at bilateral "Zusanli" (ST 36) of each rat in the moxibustion group and the inhibitor group, with 3 cones on each acupoint in each intervention, once daily for 4 weeks. In the inhibitor group, before each intervention with moxibustion, rapamycin solution was injected intraperitoneally, 2.0 mg/kg. After modeling and intervention, using ELISA, the levels of total cholesterol (TC), triglyceride (TG), high-density lipoprotein cholesterol (HDL-C), and low-density lipoprotein cholesterol (LDL-C) in the serum of rats were determined. After intervention, with HE staining and oil red O staining adopted, the abdominal aortic morphology and peripheral lipid deposition were observed. Separately, using WST-1, TBA and micro-plate method, the superoxide dismutase (SOD) activity and the levels of malondialdehyde (MDA) and nitric oxide (NO) in the serum were detected. The protein expression of mTOR, HIF-1α and VEGF in abdominal aorta were measured by Western blot method. RESULTS: Compared with those in the normal group, the levels of TC, TG and LDL-C increased (P<0.01) and HDL-C decreased (P<0.01) in the serum of the rats in the model group, the moxibustion group and the inhibitor group after model establishment. When compared with the normal group after intervention, in the model group, the serum levels of TC, TG, LDL-C and MDA increased (P<0.01), HDL-C level, SOD activity and NO level were reduced (P<0.01); the cell structure of the abdominal arota was abnormal, the peripheral lipids deposited seriously; and the protein expression of mTOR, HIF-1α and VEGF of abdominal aorta was elevated (P<0.01, P<0.05). In comparison with the model group, the levels of TC, TG, LDL-C and MDA were reduced (P<0.01), HDL-C levels, SOD activities and NO levels elevated (P<0.01, P<0.05), as well as the protein expression of mTOR, HIF-1α and VEGF of abdominal aorta (P<0.01, P<0.05) in the moxibustion group and the inhibitor group; besides, the vascular structure was ameliorated and the lipid deposition reduced in the moxibustion group, while, the vascular structure was still abnormal and the lipid deposition declined in the inhibitor group. When compared with the inhibitor group, the serum SOD activity and NO level increased (P<0.05) and MDA decreased (P<0.05); and the protein expression of mTOR, HIF-1α and VEGF of abdominal aorta was elevated (P<0.01, P<0.05) in the moxibustion group. CONCLUSIONS: The vascular injury due to hyperlipidemia is repaired by moxibustion with wheat-grain size cone at "Zusanli" (ST 36) through ameliorating oxidative stress, which is associated potentially with the modulation of mTOR/HIF-1α/VEGF signaling pathway.

Characteristics of exopolysaccharides from Paecilomyces hepiali and their simulated digestion and fermentation in vitro by human intestinal microbiota.

The metabolic process of polysaccharides in gastrointestinal digestions and the effects of the resulting carbohydrates on the composition of gut microbes are important to explore their prebiotic properties. Therefore, the purpose of this study was to investigate the simulated digestion and fecal fermentation in vitro of three fractions (PHEPSs-1, PHEPSs-2 and PHEPSs-3) purified from the crude exopolysaccharides of Paecilomyces hepiali HN1 (PHEPSs) and to explore the potential prebiotic mechanisms. The three purified fractions were characterized by HPLC, UV, FT-IR, SEM and AFM, and they were all of galactoglucomannan family with molecular weight of 178, 232 and 119 kDa, respectively. They could resist the simulated gastrointestinal digestions, but they were metabolized in fecal fermentation in vitro. Furthermore, the mannose in PHEPSs showed a higher utilization rate than that of glucose or galactose. The proliferation effects of PHEPSs on Bifidobacterium and Lactobacillus were weaker significantly than those of fructooligosaccharides before 12 h of fecal fermentation, but stronger after 24 h of fecal fermentation. Meanwhile, higher levels of short-chain fatty acids were found in PHEPSs groups when the fecal fermentation extended to 36 h. Therefore, PHEPSs are expected to have a potent gut healthy activity and can be explored as functional food ingredients.

A novel immobilized horseradish peroxidase platform driven by visible light for the complete mineralization of sulfadiazine in water.

A novel immobilized enzyme driven by visible light was prepared and used for complete mineralization of antibiotics in water bodies. The immobilized enzyme was composed of carbon nitride modified by biochar (C/CN) and horseradish peroxidase (HRP), establishing the photo-enzyme coupling system with synergistic effect. Among them, the introduction of biochar not only improves the stability and loading capacity of the enzyme, but also improves the light absorption capacity and carrier separation efficiency of the photocatalyst. After the optimization of immobilization process, the solid load of HRP could reach 251.03 mg/g, and 85.03 % enzyme activity was retained after 18 days of storage at 4 °C. In the sulfadiazine (SDZ) degradation experiment, the degradation rate of HRP/C3/CN reached 71.21 % within 60 min, which was much higher than that of HRP (2.33 %), CN (49.78 %) and C3/CN (58.85 %). In addition, under the degradation of HRP/C/CN, the total organic carbon (TOC) removal rate of SDZ reached 53.14 %, which was 6.47 and 1.74 times that of CN and C3/CN, respectively. This study shows that the introduction of biochar is of great significance to the photo-enzyme cascade coupling system and provides a new strategy for the application of HRP&g-C3N4 system in wastewater treatment.

Removal of cefalexin using yeast surface-imprinted polymer prepared by atom transfer radical polymerization.

The first use of yeast as a support in the molecular imprinting field combined with atom transfer radical polymerization was described. Then, the as-prepared molecularly imprinted polymers were characterized by Fourier transmission infrared spectrometry, scanning electron microscope, thermogravimetric analysis, and elemental analysis. The obtained imprinted polymers demonstrated elliptical-shaped particles with the thickness of imprinting layer of 0.63 µm. The batch mode experiments were adopted to investigate the adsorption equilibrium, kinetics, and selectivity. The kinetic properties of imprinted polymers were well described by the pseudo-second-order kinetic equation, indicating the chemical process was the rate-limiting step for the adsorption of cefalexin (CFX). The equilibrium data were well fitted by the Freundlich isotherm, and the multimolecular layers adsorption capacity of imprinted polymers was 34.07 mg g(-1) at 298 K. The selectivity analysis suggested that the imprinted polymers exhibited excellent selective recognition for CFX in the presence of other compounds with related structure. Finally, the analytical method based on the imprinted polymers extraction coupled with high-performance liquid chromatograph was successfully used for CFX analysis in spiked pork and water samples.

A dimeric zinc(II) complex: bis-[µ-1,2-bis-(1,2,4-triazol-4-yl)ethane-κN:N]bis-[dinitritozinc(II)].

The coordination geometry of the Zn(II) atom in the title complex, [Zn(2)(NO(2))(4)(C(6)H(8)N(6))(2)], is distorted octa-hedral, in which the Zn(II) atom is coordinated by two N atoms from the triazole rings of two symmetry-related 1,2-bis-(1,2,4-triazol-4-yl)ethane ligands and four O atoms from two nitrite ligands. Two Zn(II) atoms are bridged by two organic ligands, forming a centrosymmetric dimer. Weak C-H⋯N and C-H⋯O hydrogen bonds play an important role in the inter-molecular packing.

Bis(µ-4-amino-3,5-dimethyl-4H-1,2,4-triazole)bis-[diiodidozinc(II)].

In the title compound, [Zn(2)I(4)(C(4)H(8)N(4))(2)], the Zn(II) atom is coordinated in a distorted tetra-hedral geometry by two N atoms from the triazole rings of two 4-amino-3,5-dimethyl-4H-1,2,4-triazole (admt) ligands and two iodide ligands. Doubly bridging admt ligands connect two Zn(II) atoms, forming a centrosymmetric dimer. Weak N-H⋯I and C-H⋯I hydrogen bonds play an important role in the inter-molecular packing.

Corrigendum: Acidic Versus Alkaline Bacterial Degradation of Lignin Through Engineered Strain E. coli BL21(Lacc): Exploring the Differences in Chemical Structure, Morphology, and Degradation Products.

[This corrects the article DOI: 10.3389/fbioe.2020.00671.].

Acidic Versus Alkaline Bacterial Degradation of Lignin Through Engineered Strain E. coli BL21(Lacc): Exploring the Differences in Chemical Structure, Morphology, and Degradation Products.

There is increasing interest in research on lignin biodegradation compounds as potential building blocks in applications related to renewable products. More attention is necessary to evaluate the effects of the initial pH conditions during the bacterial degradation of lignin. In this study we performed experiments on lignin biodegradation under acidic and mild alkaline conditions. For acidic biodegradation, lignin was chemically pretreated with hydrogen peroxide. Alkaline biodegradation was achieved by developing the bacterial growth on Luria and Bertani medium with alkali lignin as the sole carbon source. The mutant strain Escherichia coli BL21(Lacc) was used to carry out lignin biodegradation over 10 days of incubation. Results demonstrated that under acidic conditions there was a predominance of aliphatic compounds of the C3-C4 type. Alkaline biodegradation was produced in the context of oxidative stress, with a greater abundance of aryl compounds. The final pH values of acidic and alkaline biodegradation of lignin were 2.53 and 7.90, respectively. The results of the gas chromatography mass spectrometry analysis detected compounds such as crotonic acid, lactic acid and 3-hydroxybutanoic acid for acidic conditions, with potential applications for adhesives and polymer precursors. Under alkaline conditions, detected compounds included 2-phenylethanol and dehydroabietic acid, with potential applications for perfumery and anti tumor/anti-inflammatory medications. Size-exclusion chromatography analysis showed that the weight-average molecular weight of the alkaline biodegraded lignin increased by 6.75-fold compared to the acidic method, resulting in a repolymerization of its molecular structure. Lignin repolymerization coincided with an increase in the relative abundance of dehydroabietic acid and isovanillyl alcohol, from 2.70 and 3.96% on day zero to 13.43 and 10.26% on 10th day. The results of the Fourier-transformed Infrared spectroscopy detected the presence of C = O bond and OH functional group associated with carboxylic acids in the acidic method. In the alkaline method there was a greater preponderance of signals related to skeletal aromatic structures, the amine functional group and the C - O - bond. Lignin biodegradation products from E. coli BL21(Laccase), under different initial pH conditions, demonstrated a promising potential to enlarge the spectrum of renewable products for biorefinery activities.

Recombinant expression and molecular engineering of the keratinase from Brevibacillus parabrevis for dehairing performance.

Keratinase is capable of distinctive degradation of keratin, which provides an eco-friendly approach for keratin waste management towards sustainable development. In this study, the recombinant keratinase (KERBP) from Brevibacillus parabrevis was successfully expressed in Escherichia coli. The purified KERBP had the specific activity of 6005.3 U/mg. It showed remarkable tolerance to various surfactants and also no collagenolytic activity. However, the moderate thermal stability limited its further application. Thus, protein engineering was further adopted to improve its stability. The variants of T218S, S236C and N181D were constructed by site-directed mutagenesis and combinatorial mutagenesis. Compared with the wild type, the t1/2 at 60 °C for the variants T218S, S236C and N181D were 3.05-, 1.18- and 1-fold increase, respectively. Moreover, the double variants N181D-T218S and N181D-S236C significantly improved thermostability with 5.1 and 2.9 °C increase of T50, and prolonging t1/2 at 60 °C with 4.09 and 1.54-fold, respectively. And the catalytic efficiency of the T218S and N181D-T218S variants was also significantly improved. Furthermore, the keratinase displayed favorable ability to dehair wool from skin within 7 h, which showed potential in leather dehairing. Our work contributes to a further insight into the thermostability of keratinase and offers a promising alternative for industrial leather application.

Anticancer activity and quantitative analysis of flavone of Cirsium japonicum DC.

Cirsium japonicum DC, a traditional Chinese medicine, has been widely used as an antihemorrhagic and diuretic agent. The objective of this study was to perform quantitative analysis of flavone by reversed-phase HPLC and examine the anticancer activity of C. japonicum DC in the S180 and H22 mice. Cirsium japonicum DC was separated and purified with several chromatography techniques and two flavone compounds, pectolinarin and 5,7-dihydroxy-6,4'-dimethoxyflavone, were isolated. The content of these two compounds in the methanol, ethanol, and aqueous extractions respectively was determined by HPLC as follows: pectolinarin 1.87%, 1.65%, 1.27%; 5,7-dihydroxy-6,4'-dimethoxyflavone: 0.515%, 0.42%, 0.221%. Furthermore, the effect of the two flavones on the anticancer activity in S180 and H22 mice was studied. Our research shows that these two flavones greatly inhibit cancer cell growth. The rate of inhibiting S180 mice was 55.77% at 50 mg kg( - 1), and the rate of life lengthening was 99.13% at 50 mg kg( - 1) in H22 mice.