Integrating Activity-Guided Strategy and Fingerprint Analysis to Target Potent Cytotoxic Brefeldin A from a Fungal Library of the Medicinal Mangrove Acanthus ilicifolius.

Mangrove-associated fungi are rich sources of novel and bioactive compounds. A total of 102 fungal strains were isolated from the medicinal mangrove Acanthus ilicifolius collected from the South China Sea. Eighty-four independent culturable isolates were identified using a combination of morphological characteristics and internal transcribed spacer (ITS) sequence analyses, of which thirty-seven strains were selected for phylogenetic analysis. The identified fungi belonged to 22 genera within seven taxonomic orders of one phyla, of which four genera Verticillium, Neocosmospora, Valsa, and Pyrenochaeta were first isolated from mangroves. The cytotoxic activity of organic extracts from 55 identified fungi was evaluated against human lung cancer cell lines (A-549), human cervical carcinoma cell lines (HeLa), human hepatoma cells (HepG2), and human acute lymphoblastic leukemia cell lines (Jurkat). The crude extracts of 31 fungi (56.4%) displayed strong cytotoxicity at the concentration of 50 µg/mL. Furthermore, the fungus Penicillium sp. (HS-N-27) still showed strong cytotoxic activity at the concentration of 25 µg/mL. Integrating cytotoxic activity-guided strategy and fingerprint analysis, a well-known natural Golgi-disruptor and Arf-GEFs inhibitor, brefeldin A, was isolated from the target active strain HS-N-27. It displayed potential activity against A549, HeLa and HepG2 cell lines with the IC50 values of 101.2, 171.9 and 239.1 nM, respectively. Therefore, combining activity-guided strategy with fingerprint analysis as a discovery tool will be implemented as a systematic strategy for quick discovery of active compounds.

Design, Semisynthesis, Insecticidal and Antibacterial Activities of a Series of Marine-Derived Geodin Derivatives and Their Preliminary Structure-Activity Relationships.

To enhance the biological activity of the natural product geodin (1), isolated from the marine-derived fungus Aspergillus sp., a series of new ether derivatives (2-37) was designed and semisynthesized using a high-yielding one-step reaction. In addition, the insecticidal and antibacterial activities of all geodin congeners were evaluated systematically. Most of these derivatives showed better insecticidal activities against Helicoverpa armigera Hübner than 1. In particular, 15 showed potent insecticidal activity with an IC50 value of 89 µM, comparable to the positive control azadirachtin (IC50 = 70 µM). Additionally, 5, 12, 13, 16, 30 and 33 showed strong antibacterial activity against Staphylococcus aureus and Aeromonas salmonicida with MIC values in the range of 1.15-4.93 µM. The preliminary structure-activity relationships indicated that the introduction of halogenated benzyl especially fluorobenzyl, into 1 and substitution of 4-OH could be key factors in increasing the insecticidal and antibacterial activities of geodin.

Oil degradation and variation of microbial communities in contaminated soils induced by different bacterivorous nematodes species.

Oil pollution poses a great threat to environments and makes the remediation of oil-contaminated soils an urgent task. Microorganisms are the main biological factor for oil removal in the environment but microbial remediation is greatly affected by environmental factors. For our research, we inoculated three species of bacterivorous nematodes into oil-contaminated soil to explore how bacterivorous nematodes affect soil microbial activities and community structure in contaminated soil, as well as how efficiently different nematodes remove oil pollution from the soil. Six treatments were set in this experiment: sterilized oil-contaminated soil (SOC); nematode-free soil (S); oil-contaminated soil (OC); oil-contaminated soil + Caenorhabditis elegans (OCN1); oil-contaminated soil + Cephalobus persegnis (OCN2); oil-contaminated soil + Rhabditis marina (OCN3) for a 168-day incubation experiment. After the experiment was done, the oil contents in SOC, OC, OCN1, OCN2, and OCN3 were reduced by 6.5%, 32.3%, 38.2%, 42.8%, and 40.2%, respectively, compared with the beginning of the experiment. The amount of phospholipid fatty acids (PLFAs) of Gram-negative bacteria in OC, OCN1, OCN2, and OCN3 was increased by 50.9%, 43.4%, 37.7%, and 47.9%, respectively, compared with that of S. During the 168-day incubation period, the maximum growth of the number of nematodes in OCN1, OCN2, and OCN3 compared with the initial number of the nematodes were 2.25-, 1.52-, and 1.65-fold, respectively. The amount of oil residue in the contaminated soil negatively correlated with the populations of nematodes, total microorganisms, Gram-negative bacteria, actinomycetes, and eukaryotes. Thus, oil pollution increased the number of Gram-negative bacteria, decreased the ratio of Gram-positive bacteria/Gram-negative bacteria and Fungi/Bacteria significantly, and altered the community structure of soil microorganisms. Each species of bacterivorous nematodes has got its unique effect on the microbial activity and community structure in oil contaminated soils, but those tested can promote oil degradation and thus improve the environment of oil contaminated soils.

Variation of microbial activities and communities in petroleum-contaminated soils induced by the addition of organic materials and bacterivorous nematodes.

Bacterivorous nematodes are abundant in petroleum-contaminated soils. However, the ecological functions of bacterivorous nematodes and their impacts together with the addition of organic materials on the activity and diversity of microorganisms in petroleum-contaminated soils remain unknown. To assess such effects, six treatments were established in this study, including uncontaminated nematodes-free soil (Control), petroleum-contaminated soil (PC), petroleum-contaminated soil + 5 nematodes per gram dry soil (PCN), and petroleum-contaminated soil + 5 nematodes per gram dry soil + 1% wheat straw (PCNW), or + 1% rapeseed cake (PCNR), or + 1% biochar (PCNB). Results showed that the enzyme activities in the six treatments generally increased firstly and then decreased during the incubation period. Compared with Control, the invertase activity in PCNW, PCNR, and PCNB increased by 80.6%, 313.5%, and 12.4%, respectively, whereas the urease activity in PC, PCN, PCNW, PCNR, and PCNW increased by 1.2%, 25.5%, 124.3%, 105.3%, and 25.5%, respectively. Petroleum pollution, inoculation of bacterivorous nematodes, and the addition of organic materials all significantly boosted the concentrations of phospholipid fatty acids (PLFAs) of soil bacteria, actinobacteria, and total microorganisms, and increased the concentrations of both G+ and G- bacteria PLFAs and the ratio of G-/G+. The concentration of fungi PLFAs and the ratio of fungi to bacteria were significantly higher in PCNW and PCNR than those in other treatments. Overall, adding bacterivorous nematodes and organic materials to the petroleum-contaminated soil significantly improved soil microbial activity and community structure, suggesting that bacterivorous nematodes could be used for the bioremediation in petroleum contaminated soils.

Molecular Dynamics Study on Properties of Hydration Layers above Polymer Antifouling Membranes.

Zwitterionic polymers as crucial antifouling materials exhibit excellent antifouling performance due to their strong hydration ability. The structure−property relationship at the molecular level still remains to be elucidated. In this work, the surface hydration ability of three antifouling polymer membranes grafting on polysiloxane membranes Poly(sulfobetaine methacrylate) (T4-SB), poly(3-(methacryloyloxy)propane-1-sulfonate) (T4-SP), and poly(2-(dimethylamino)ethyl methacrylate) (T4-DM) was investigated. An orderly packed, and tightly bound surface hydration layer above T4-SP and T4-SB antifouling membranes was found by means of analyzing the dipole orientation distribution, diffusion coefficient, and average residence time. To further understand the surface hydration ability of three antifouling membranes, the surface structure, density profile, roughness, and area percentage of hydrophilic surface combining electrostatic potential, RDFs, SDFs, and noncovalent interactions of three polymers' monomers were studied. It was concluded that the broadest distribution of electrostatic potential on the surface and the nature of anionic SO3- groups led to the following antifouling order of T4-SB > T4-SP > T4-DM. We hope that this work will gain some insight for the rational design and optimization of ecofriendly antifouling materials.

Aspersymmetide A, a New Centrosymmetric Cyclohexapeptide from the Marine-Derived Fungus Aspergillus versicolor.

A new centrosymmetric cyclohexapeptide, aspersymmetide A (1), together with a known peptide, asperphenamate (2), was isolated from the fungus Aspergillus versicolor isolated from a gorgonian coral Carijoa sp., collected from the South China Sea. The chemical structure of 1 was elucidated by analyzing its NMR spectroscopy and MS spectrometry data, and the absolute configurations of the amino acids of 1 were determined by Marfey's method and UPLC-MS analysis of the hydrolysate. Aspersymmetide A (1) represents the first example of marine-derived centrosymmetric cyclohexapeptide. Moreover, 1 exhibited weak cytotoxicity against NCI-H292 and A431 cell lines at the concentration of 10 µM.

Seabuckthorn (Hippophae rhamnoides L.) plantation degradation aggravates microbial metabolic C and P limitations on the Northern Loess Plateau in China.

Vegetation degradation in arid and semi-arid regions reduces plant C inputs to the soil, which can impede soil nutrient cycling because of the limited C source for microbial metabolism. However, whether vegetation degradation aggravates microbial nutrient limitation in degraded ecosystems in arid and semi-arid regions is not fully understood. Here, we investigated changes in soil enzyme activity and microbial nutrient limitation along a well-documented gradient of degraded seabuckthorn (Hippophae rhamnoides L.) (slightly degraded, canopy dieback <25 %, moderately degraded, canopy dieback 25 %-75 %, and severely degraded, canopy dieback >75 %) in Liang (long ridge) and gully channel locations in the Pisha Sandstone region of the Loess Plateau, China. We found that as the magnitude of seabuckthorn degradation increased, activities of C-acquiring enzymes and ratios of C:N and C:P enzymes (0.54-0.80 and 0.52-0.77, respectively) increased whereas the N:P enzyme ratio (0.93-0.99) decreased. Stoichiometric modelling further indicated that microorganisms were limited by soil C and P (vector angle >45°) in the seabuckthorn plantation region, and the degradation of seabuckthorn plantation aggravated microbial C and P limitations. Partial least squares path modelling revealed that seabuckthorn degradation (canopy dieback) was the main factor explaining microbial C limitation variations, while soil physicochemical properties (pH and soil moisture content) and understory plant parameters (litter biomass) were the major factors underlying microbial P limitation of long ridge and gully channel formations, respectively. Our findings highlight synergistic changes between aboveground and belowground processes, suggesting an unexpected negative effect of vegetation degradation on soil microbial community and nutrient cycling. These insights offer a direction for the development of plantation nutrients management strategies in semi-arid and arid areas.

Construction of activated biochar/Bi2WO6 and /Bi2MoO6 composites to enhance adsorption and photocatalysis performance for efficient application in the removal of pollutants and disinfection.

To synergistically enhance the adsorption and photocatalytic performance of Bi2WO6 and Bi2MoO6, using activated biochar (ACB) as substrate, ACB-Bi2WO6 and ACB-Bi2MoO6 composites were facilely prepared by hydrothermal synthesis. Their adsorption-photocatalytic degradation effects on rhodamine B (RhB), tetracycline (TC), and norfloxacin (NOR) were comparatively investigated. Additionally, the effects of environmental factors, wastewater treatment tests, and disinfection were systematically studied, and the enhancement mechanisms and reasons for the degradation differences were highlighted. The results showed that ACB-Bi2WO6 and ACB-Bi2MoO6 were confirmed to form intimately contacted heterojunctions by various advanced characterization techniques. The introduction of ACB narrowed the band-gap energy of Bi2WO6 and Bi2MoO6, and improved the visible light absorption range and specific surface area. The optimal loading ratios of ACB-Bi2WO6 and ACB-Bi2MoO6 were 1:1.06 and 1:0.58, respectively. The removal rate of ACB-Bi2WO6 for high concentrations of RhB (200 mg·L-1), TC and NOR (50 mg·L-1) were 89.15%, 87.27%, and 72.17%, respectively, which were higher than those of ACB-Bi2MoO6 and significantly stronger than those of Bi2WO6 and Bi2MoO6. This was attributed to the more effective inhibition of photogenerated carrier recombination, higher absorbance, and uniform morphology via ACB-Bi2WO6. ·OH and holes were dominant active species in photocatalysis, and the possible photogenerated carrier transfer path is type II heterojunction. Furthermore, ACB-Bi2WO6 possessed good reusability, and the removal of RhB and TC from the actual wastewater exceeded 80.63% and 58.54%, respectively. The sterilization rates of ACB-Bi2WO6 reached 99% and 95% for E. coli and S. aureus within 24 h, respectively. Therefore, ACB-Bi2WO6 was more recommended for environmental applications.

Biochar and nitrogen fertilizer alters soil nitrogen dynamics and greenhouse gas fluxes from two temperate soils.

Biochar (BC) application to agricultural soils could potentially sequester recalcitrant C, increase N retention, increase water holding capacity, and decrease greenhouse gas (GHG) emissions. Biochar addition to soils can alter soil N cycling and in some cases decrease extractable mineral N (NO and NH) and NO emissions. These benefits are not uniformly observed across varying soil types, N fertilization, and BC properties. To determine the effects of BC addition on N retention and GHG flux, we added two sizes (>250 and <250 µm) of oak-derived BC (10% w/w) to two soils (aridic Argiustoll and aquic Haplustoll) with and without N fertilizer and measured extractable NO and NH and GHG efflux (NO, CO, and CH) in a 123-d laboratory incubation. Biochar had no effect on NO, NH, or NO in the unfertilized treatments of either soil. Biochar decreased cumulative extractable NO in N fertilized treatments by 8% but had mixed effects on NH. Greenhouse gas efflux differed substantially between the two soils, but generally with N fertilizer BC addition decreased NO 3 to 60%, increased CO 10 to 21%, and increased CH emissions 5 to 72%. Soil pH and total treatment N (soil + fertilizer + BC) predicted soil NO flux well across these two different soils. Expressed as CO equivalents, BC significantly reduced GHG emissions only in the N-fertilized silt loam by decreasing NO flux. In unfertilized soils, CO was the dominant GHG component, and the direction of the flux was mediated by positive or negative BC effects on soil CO flux. On the basis of our data, the use of BC appears to be an effective management strategy to reduce N leaching and GHG emissions, particularly in neutral to acidic soils with high N content.

Visible-light-driven photocatalytic degradation of dye and antibiotics by activated biochar composited with K+ doped g-C3N4: Effects, mechanisms, actual wastewater treatment and disinfection.

To improve the performance of graphitic carbon nitride (g-C3N4), a hotly researched metal-free photocatalyst, for better application in the efficient removal of organic pollutants, adsorption synergistically enhanced photocatalysis mechanism was thoroughly explored. Based on KOH pore-forming activated biochar (ACB) and K+ doped g-C3N4 (K-gC3N4), the novel activated biochar-based K-gC3N4 composite (ACB-K-gC3N4) was synthesized via the innovative ultrasonic-milling method. Rhodamine B (RhB), tetracycline (TC), norfloxacin (NOR), and chloramphenicol (CAP) were selected as target pollutants, and the effects of environmental factors, recycling and actual wastewater tests, disinfection effects, and various enhancement strategies were investigated. The results showed that K-gC3N4 was successfully composited with ACB by various characterizations, where the loading mass ratio of 1:2 exhibited the best performance. ACB-K-gC3N4 possessed a larger specific surface area, richer functional groups, suitable band gap (2.29 eV), and broader visible light absorption (~716 nm) than K-gC3N4. ACB-K-gC3N4 presented effective removal efficiency over K-gC3N4 for four pollutants, in which the removal efficiency of RhB reached 93.26%, and the degradation rate constant of 0.0119 min-1 was four times higher than K-gC3N4 (0.0029 min-1). Moreover, ACB-K-gC3N4 was superior to K-gC3N4 in disinfecting S. aureus and E. coli, with a sterilization rate of exceeding 90% for 12 h. The photodegradation activity was dominated by ·O2-, h+, and ·OH, and the mechanisms involved in the three stages. This was attributed to the unique structure and surface properties (defects and persistent free radicals) of ACB, as evidenced by improved adsorption stage and transfer of degradation intermediates, facilitated the generation of active species, accelerated migration of photogenerated electrons, and inhibited photogenerated carriers recombination by the heterojunction. The good reusability and stability, enhancement strategies (blowing air and heating), and satisfactory feasibility for actual wastewater allow ACB-K-gC3N4 possible to promote high-concentration wastewater treatment and disinfection.

Design and synthesis of a new bioactive compound for marine antifouling inspired by natural products.

A marine antifouling compound, N-octyl-2-hydroxybenzamide (OHBA), inspired by ceramide and paeonol molecules, was created. First, methyl salicylate was synthesized with salicylic acid and methanol, followed by n-octylamine through an ester-amine condensation reaction. Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy, and mass spectrometry confirmed the characteristic structure of the OHBA compound. Bioassays showed that OHBA inhibits the growth of typical marine fouling organisms, such as Vibrio azureus, Navicula subminuscula, Ulva pertusa, Mytilus edulis, and Amphibalanus amphitrite, indicating its broad-spectrum antifouling ability. A one-year marine real-sea test further demonstrated the excellent antifouling properties of OHBA. OHBA is also extremely biodegradable, with a half-life of 6.3 days, making it a less environmentally harmful replacement for widely-used heavy metal-containing antifoulants.

Structure modification, antialgal, antiplasmodial, and toxic evaluations of a series of new marine-derived 14-membered resorcylic acid lactone derivatives.

Marine natural products play critical roles in the chemical defense of many marine organisms and are essential, reputable sources of successful drug leads. Sixty-seven 14-membered resorcylic acid lactone derivatives 3-27 and 30-71 of the natural product zeaenol (1) isolated from the marine-derived fungus Cochliobolus lunatus were semisynthesized by chlorination, acylation, esterification, and acetalization in one to three steps. The structures of these new derivatives were established by HRESIMS and NMR techniques. All the compounds (1-71) were evaluated for their antialgal and antiplasmodial activities. Among them, 14 compounds displayed antifouling activities against adhesion of the fouling diatoms. In particular, 9 and 34 exhibited strong and selective inhibitory effects against the diatoms Navicula laevissima and Navicula exigua (EC50 = 6.67 and 8.55 µmol/L), respectively, which were similar in efficacy to those of the positive control SeaNine 211 (EC50 = 2.90 and 9.74 µmol/L). More importantly, 38, 39, and 69-71 showed potent antiplasmodial activities against Plasmodium falciparum with IC50 values ranging from 3.54 to 9.72 µmol/L. Very interestingly, the five antiplasmodial derivatives displayed non-toxicity in the cytotoxicity assays and the zebrafish embryos model, thus, representing potential promising antiplasmodial drug agents. The preliminary structure-activity relationships indicated that biphenyl substituent at C-2, acetonide at positions C-5' and C-6', and tri- or tetra-substituted of acyl groups increased the antiplasmodial activity. Therefore, combining evaluation of chemical ecology with pharmacological models will be implemented as a systematic strategy, not only for environmentally friendly antifoulants but also for structurally novel drugs. Supplementary Information: The online version contains supplementary material available at 10.1007/s42995-021-00103-0.

Enhanced ammonium removal on biochar from a new forestry waste by ultrasonic activation: Characteristics, mechanisms and evaluation.

The adsorption treatment of ammonium-containing wastewater has attracted significant global attention. Most enhanced adsorption methods employ chemical modification, and there are few reports on physical activation. We present a physical activation to explore whether physical ultrasound may enhance the adsorption performance and comprehensive utilisation of a new forestry waste, Caragana korshinskii was used as a feedstock to prepare activated biochar (ACB) by controlling the pyrolysis temperatures and ultrasound parameters. The optimal parameters were determined via batch adsorption of NH4+, and the adsorption characteristics were assessed by 8 kinds of models and influence experiments. Moreover, the physicochemical properties of ACB during the pyrolysis process were investigated, and the ultrasonic activation and adsorption mechanisms were discussed using multiple characterisation techniques. Additionally, the cost analysis, the safety of the ultrasonic process and disposal method also were evaluated. The results showed that the ultrasonic activation significantly enhanced the NH4+ adsorption efficiency of biochar by approximately 5 times. ACB exhibited the best performance at 500 °C with an ultrasonic activation time of 480 min, frequency of 45 kHz, and power of 700 W. The ultrasonic activation reduced the biochar ash and induced pore formation, which increased the specific surface area through cavitation corrosion and micro-acoustic flow mechanism. The NH4+ adsorption mechanisms comprised physicochemical processes, of which physical adsorption was dominant. The preparation cost of 1 kg ACB was about 0.42 US dollar, and no secondary pollution occurred in the activation process. The findings prove that ultrasonic technology is efficient and convenient for enhancing biochar adsorption performance, and thus is suitable for industrial applications and promotion.

Adsorption characteristics and mechanisms of Pb2+ and Cd2+ by a new agricultural waste-Caragana korshinskii biomass derived biochar.

In order to explore the comprehensive utilisation and recycling technology of Caragana korshinskii resources, a new agricultural biomass waste, 15 kinds of Caragana korshinskii biochar (CB) were prepared by controlling the pyrolysis temperature and time at the anaerobic environment. Moreover, we pay more attention to deriving the adsorption mechanisms and exploring the difference in adsorption characteristics of Pb2+ and Cd2+. The optimal preparation conditions and the batch adsorption experiments were evaluated, and the adsorption characteristics and mechanisms were discussed using 8 theoretical adsorption models and multiple characterisation methods. The results showed that the CB prepared at 650 °C for 3 h presented the best performance. The Langmuir and Freundlich models can well simulate the isotherm adsorption process of CB for Pb2+ and Cd2+, respectively. The adsorption kinetics of CB for Pb2+ and Cd2+ were best fitted by the pseudo-second-order model. The adsorption equilibrium for Pb2+ and Cd2+ was reached within 3 h, and their maximum adsorption capacity reached 220.94 mg g-1 and 42.43 mg g-1, respectively. In addition, the best addition amount was 3 g L-1 and 2.2 g L-1 for Pb2+ and Cd2+, respectively. The optimum pH range was 3-6 for Pb2+ and 6-7.5 for Cd2+. The adsorption mechanisms of CB for Pb2+ and Cd2+ were physicochemical composite adsorption processes, mainly including physical sorption on surface sites, intraparticle diffusion, electrostatic adsorption, ion/ligand exchange, cationic-π interactions, surface complexation and precipitation. Furthermore, the ash of CB also presented a positive effect on the adsorption of Pb2+. Compared with other cellulose- and lignin-based biomass materials, CB showed low cost and efficient performance without complicated modification conditions. Therefore, this study demonstrates that CB is a promising raw material in water pollution control to immobilise heavy metals.

The Eco-Friendly Biochar and Valuable Bio-Oil from Caragana korshinskii: Pyrolysis Preparation, Characterization, and Adsorption Applications.

Carbonization of biomass can prepare carbon materials with excellent properties. In order to explore the comprehensive utilization and recycling of Caragana korshinskii biomass, 15 kinds of Caragana korshinskii biochar (CB) were prepared by controlling the oxygen-limited pyrolysis process. Moreover, we pay attention to the dynamic changes of microstructure of CB and the by-products. The physicochemical properties of CB were characterized by Scanning Electron Microscope (SEM), BET-specific surface area (BET-SSA), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Fourier Transform Infrared (FTIR), and Gas chromatography-mass spectrometry (GC-MS). The optimal preparation technology was evaluated by batch adsorption application experiment of NO3-, and the pyrolysis mechanism was explored. The results showed that the pyrolysis temperature is the most important factor in the properties of CB. With the increase of temperature, the content of C, pH, mesoporous structure, BET-SSA of CB increased, the cation exchange capacity (CEC) decreased and then increased, but the yield and the content of O and N decreased. The CEC, pH, and BET-SSA of CB under each pyrolysis process were 16.64-81.4 cmol·kg-1, 6.65-8.99, and 13.52-133.49 m2·g-1, respectively. CB contains abundant functional groups and mesoporous structure. As the pyrolysis temperature and time increases, the bond valence structure of C 1s, Ca 2p, and O 1s is more stable, and the phase structure of CaCO3 is more obvious, where the aromaticity increases, and the polarity decreases. The CB prepared at 650 °C for 3 h presented the best adsorption performance, and the maximum theoretical adsorption capacity for NO3- reached 120.65 mg·g-1. The Langmuir model and pseudo-second-order model can well describe the isothermal and kinetics adsorption process of NO3-, respectively. Compared with other cellulose and lignin-based biomass materials, CB showed efficient adsorption performance of NO3- without complicated modification condition. The by-products contain bio-soil and tail gas, which are potential source of liquid fuel and chemical raw materials. Especially, the bio-oil of CB contains α-d-glucopyranose, which can be used in medical tests and medicines.

Combining infiltration holes and level ditches to enhance the soil water and nutrient pools for semi-arid slope shrubland revegetation.

Active vegetation restoration has been proposed as an effective approach for restoring degraded ecosystems. Soil water and nutrient deficits hinder slope revegetation in arid and semi-arid areas. However, few studies have discussed rainfall runoff utilization and soil nutrient conservation within the context of slope vegetation restoration. In this study, the effects of combining infiltration holes and level ditches on the soil water storage, organic matter, and total nitrogen were analyzed on the slopes of shrubland and bare land. The results showed that the combined measures significantly increased the average soil water content above the 100 cm soil layer and mitigated soil desiccation below 220 cm in the shrubland. Meanwhile, the combined measures obviously increased the soil organic matter and total nitrogen above the 60 and 40 cm soil layers in bare land and shrubland, respectively. Overall, combining infiltration holes and landscape engineering measures is an effective approach for enhancing the soil water and nutrient pools of slopes. Our findings provide an effective engineering measure to combat soil water and nutrient deficits for slope vegetation restoration in arid and semi-arid areas.

Fatigue-Resistant, Notch-Insensitive Zwitterionic Polymer Hydrogels with High Self-Healing Ability.

Introducing self-healing properties into hydrogels can prolong their application lifetime. However, achieving mechanical strength without sacrificing self-healing properties is still a major challenge. We prepared a series of zwitterionic polymer hydrogels by random copolymerization of zwitterionic ionic monomer (SBMA), cationic monomer (DAC) and hydrophilic monomer (HEMA). The ionic bonds and hydrogen bonds formed in the hydrogels can efficiently dissipate energy and rebuild the network. The resulting hydrogels show high mechanical strength (289-396 KPa of fracture stress, 433-864 % of fracture stress) and have great fatigue resistance. The hydrogel with a 1 : 1 molar ratio of SBMA:DAC possesses the best self-healing properties (self-healing efficiency up to 96.5 % at room temperature for 10 h). The self-healing process is completely spontaneous and does not require external factors to assist. In addition, the hydrogel also possesses notch insensitivity with a fracture energy of 12000 J m-2 . After combining the conductivity of RGO aerogel, the hydrogel/RGO composites show good strain sensitivity with high reliability and self-healing ability, which has certain significance in broadening the application of these zwitterionic hydrogels.

Phosphorus recovery by core-shell γ-Al2O3/Fe3O4 biochar composite from aqueous phosphate solutions.

Biochar can act as an adsorbent for phosphate removal from water sources, which can be highly beneficial in limiting eutrophication and recycling elemental phosphorus (P). However, it is difficult to use a single biochar material to overcome problems such as low adsorption efficiency, difficulty in reuse, and secondary pollution. This study addresses these challenges using a novel core-shell structure γ-Al2O3/Fe3O4 biochar adsorbent (AFBC) with significant P uptake capabilities in terms of its high adsorption capacity (205.7 mg g-1), magnetic properties (saturation magnetization 24.70 emu g-1), and high reuse stability (91.0% removal efficiency after five adsorption-desorption cycles). The highest partition coefficient 1.04 mg g-1 µM-1, was obtained at a concentration of 322.89 µM. Furthermore, AFBC exhibited strong regeneration ability in multiple cycle trials, making it extremely viable for sustainable resource management. P removal mechanisms, i.e., electrostatic attraction and inner-sphere complexation, were explained using Fourier transform infrared (FT-IR) spectra and X-ray photoelectron spectroscopy (XPS) measurements. A surface complexation model was established by considering the formation of monodentate mononuclear and bidentate binuclear surface complexes of P to illustrate the adsorption process. Owing to its high adsorption efficiency, easy separation from water, and environmental friendliness, AFBC is a potential adsorbent for P recovery from polluted waters.

Improved Simultaneous Decolorization and Power Generation in a Microbial Fuel Cell with the Sponge Anode Modified by Polyaniline and Chitosan.

In recent years, microbial fuel cell (MFC) has been regarded as a promising technology for dye wastewater treatment. Compared with traditional anaerobic reactors, MFC has better decolorization effect while producing electricity simultaneously. In this paper, a double-chamber MFC with the sponge anode modified by polyaniline and chitosan-NCNTs was employed for simultaneous azo dye decolorization and bioelectricity generation. The influence of dye concentration, co-substrate concentration, and operating temperature on the performance of MFC with the modified anodes were studied. The results showed that a high decolorization efficiency (98.41%) and maximum power density (2816.67 mW m-3) of MFC equipped with modified bioanodes were achieved due to the biocompatibility and bioelectrocatalysis of modified material. And the biomass on the modified anode's surface was increased by 1.47 times. Additionally, microbial community analysis revealed that the modification of polyaniline and chitosan-NCNTs improved the selective enrichment of specific communities and the main microorganism was the electroactive and decolorizing bacteria Enterobacter (62.84%). Therefore, the composite anode is capable of fully utilizing the synergistic role of various materials, leading to superior performance of dye decolorization in MFCs. This work provided a strategy for the research on the recovery of biomass energy and decolorization in wastewater treatment. Graphical Abstract.

Effect of three artificial aging techniques on physicochemical properties and Pb adsorption capacities of different biochars.

Biochar is beneficial for soil amendment, but further research is still required on changes in its physicochemical properties during aging, especially in oxygen-containing functional groups and associated adsorption behaviors. Here, we used two different biochars, apple tree branch biochar and maize stalk biochar, and simulated the aging process by using freeze-thaw cycles, dry-wet cycles, and chemical oxidation methods. We investigated the changes in the physicochemical properties and Pb adsorption behavior of the biochars before and after aging treatments. The characterization results showed that the biochar surface structure changed after aging treatments. In general, the specific surface areas (SSAs) of the two biochars increased after chemical oxidation treatment but decreased after the other two treatments. The elemental content analyses indicated a decrease in the C content and increase in O content after artificial aging. In addition, the content of oxygen-containing functional groups in most biochars is increasing after treatment. The increase or decrease in SSA resulted in an increase or decrease in adsorption sites, respectively, thereby enhancing or reducing the adsorption capacity of the biochar. Furthermore, oxygen-containing functional groups enhanced the Pb adsorption capacity of biochar by complexation of free carboxyl and hydroxyl functional groups with Pb. Our research indicated that aging can lead to changes in the Pb adsorption capacity of biochar and that these changes vary depending on the type of aging and biochar. Our results will help to provide a better understanding of the changes in physicochemical properties and Pb adsorption capacity of biochar during the aging process in soil toward making full use of biochar for soil amendment.