RESUMO
BACKGROUND: Glycyrrhiza inflata Bat. and Glycyrrhiza uralensis Fisch. are both original plants of 'Gan Cao' in the Chinese Pharmacopoeia, and G. uralensis is currently the mainstream variety of licorice and has a long history of use in traditional Chinese medicine. Both of these species have shown some degree of tolerance to salinity, G. inflata exhibits higher salt tolerance than G. uralensis and can grow on saline meadow soils and crusty saline soils. However, the regulatory mechanism responsible for the differences in salt tolerance between different licorice species is unclear. Due to land area-related limitations, the excavation and cultivation of licorice varieties in saline-alkaline areas that both exhibit tolerance to salt and contain highly efficient active substances are needed. The systematic identification of the key genes and pathways associated with the differences in salt tolerance between these two licorice species will be beneficial for cultivating high-quality salt-tolerant licorice G. uralensis plant varieties and for the long-term development of the licorice industry. In this research, the differences in growth response indicators, ion accumulation, and transcription expression between the two licorice species were analyzed. RESULTS: This research included a comprehensive comparison of growth response indicators, including biomass, malondialdehyde (MDA) levels, and total flavonoids content, between two distinct licorice species and an analysis of their ion content and transcriptome expression. In contrast to the result found for G. uralensis, the salt treatment of G. inflata ensured the stable accumulation of biomass and total flavonoids at 0.5 d, 15 d, and 30 d and the restriction of Na+ to the roots while allowing for more K+ and Ca2+ accumulation. Notably, despite the increase in the Na+ concentration in the roots, the MDA concentration remained low. Transcriptome analysis revealed that the regulatory effects of growth and ion transport on the two licorice species were strongly correlated with the following pathways and relevant DEGs: the TCA cycle, the pentose phosphate pathway, and the photosynthetic carbon fixation pathway involved in carbon metabolism; Casparian strip formation (lignin oxidation and translocation, suberin formation) in response to Na+; K+ and Ca2+ translocation, organic solute synthesis (arginine, polyamines, GABA) in response to osmotic stresses; and the biosynthesis of the nonenzymatic antioxidants carotenoids and flavonoids in response to antioxidant stress. Furthermore, the differential expression of the DEGs related to ABA signaling in hormone transduction and the regulation of transcription factors such as the HSF and GRAS families may be associated with the remarkable salt tolerance of G. inflata. CONCLUSION: Compared with G. uralensis, G. inflata exhibits greater salt tolerance, which is primarily attributable to factors related to carbon metabolism, endodermal barrier formation and development, K+ and Ca2+ transport, biosynthesis of carotenoids and flavonoids, and regulation of signal transduction pathways and salt-responsive transcription factors. The formation of the Casparian strip, especially the transport and oxidation of lignin precursors, is likely the primary reason for the markedly higher amount of Na+ in the roots of G. inflata than in those of G. uralensis. The tendency of G. inflata to maintain low MDA levels in its roots under such conditions is closely related to the biosynthesis of flavonoids and carotenoids and the maintenance of the osmotic balance in roots by the absorption of more K+ and Ca2+ to meet growth needs. These findings may provide new insights for developing and cultivating G. uralensis plant species selected for cultivation in saline environments or soils managed through agronomic practices that involve the use of water with a high salt content.
Assuntos
Glycyrrhiza uralensis , Glycyrrhiza , Glycyrrhiza/metabolismo , Tolerância ao Sal/genética , Transcriptoma , Lignina/metabolismo , Flavonoides/metabolismo , Antioxidantes/metabolismo , Carotenoides/metabolismo , Transporte de Íons , Carbono/metabolismo , Solo , Fatores de Transcrição/genéticaRESUMO
High-entropy compounds with extraordinary properties due to the synergistic effect of multiple components have exhibited great potential and attracted extensive attention in various fields, including physics, mechanical property analysis, and energy storage. Achieving universal stability and synthesis of high-entropy compounds with a wide range of components and structures continues to be difficult due to the high complexity of multicomponent mixing. Here, we propose a design strategy with high generality for realizing the stability and synthesis of high-entropy compounds that one metal site like the framework in the compound structures with bimetallic sites stabilizes another site to accommodate different elements. Several typical metal compounds with bimetallic sites, including perovskite hydroxides, layered double hydroxide, spinel sulfide, perovskite fluoride, and spinel oxides, have been synthesized into high-entropy compounds. High-entropy perovskite hydroxides (HEPHs) as representative compounds have been synthesized with a highly wide range of components even a septenary component and exhibit great oxygen evolution activity. Our work provides a design platform to develop more high-entropy compound systems with promising development potential for electrocatalysts.
RESUMO
Atomically dispersed nitrogen-coordinated 3d transition-metal site on carbon support (M-NC) are promising alternatives to Pt group metal-based catalysts toward oxygen reduction reaction (ORR). However, despite the excellent activities of most of M-NC catalysts, such as Fe-NC, Co-NC et al., their durability is far from satisfactory due to Fenton reaction. Herein, this work reports a novel Si-doped Ni-NC catalyst (Ni-SiNC) that possesses high activity and excellent stability. X-ray absorption fine structure and aberration-corrected transmission electron microscopy uncover that the single-atom Ni site is coordinated with one Si atom and three N atoms, constructing Ni-Si1 N3 moiety. The Ni-SiNC catalyst exhibits a half-wave potential (E1/2 ) of 0.866 V versus RHE, with a distinguished long-term durability in alkaline media of only 10 mV negative shift in E1/2 after 35 000 cycles, which is also validated in Zn-air battery. Density functional theory calculations reveal that the Ni-Si1 N3 moiety facilitates ORR kinetics through optimizing the adsorption of intermediates.
RESUMO
Bimetallic layered double hydroxides (LDHs) are promising catalysts for anodic oxygen evolution reaction (OER) in alkaline media. Despite good stability, NiCo LDH displays an unsatisfactory OER activity relative to the most robust NiFe LDH and CoFe LDH. Herein, a novel NiCo LDH electrocatalyst modified with single-atom silver grown on carbon cloth (AgSA -NiCo LDH/CC) that exhibits exceptional OER activity and stability in 1.0 m KOH is reported. The AgSA -NiCo LDH/CC catalyst only requires a low overpotential of 192 mV to reach a current density of 10 mA cm-2 , obviously boosting the OER activity of NiCo LDH/CC (410 mV@10 mA cm-2 ). Inspiringly, AgSA -NiCo LDH/CC can maintain its high activity for up to 500 h at a large current density of 100 mA cm-2 , exceeding most single-atom OER catalysts. In situ Raman spectroscopy studies uncover that the in situ formed NiCoOOH during OER is the real active species. Hard X-ray absorption spectrum (XAS) and density functional theory (DFT) calculations validate that single-atom Ag occupying Ni site increases the chemical valence of Ni elements, and then weakens the adsorption of oxygen-contained intermediates on Ni sites, fundamentally accounting for the enhanced OER performance.
RESUMO
The recent development of some special oxygen evolution reaction (OER) electrocatalysts shows that the lattice oxygen could participate in the catalysis process via the lattice oxygen oxidation mechanism (LOM), which the provides good possibility of exploring advanced electrocatalysts that could overcome the scaling relationship in conventional catalysis processes through a traditional adsorbate evolution mechanism. In this work, we theoretically predict that, benefiting from the unhybridized O-Li orbitals and the resulting metastable Li-O-Li ligands, the lattice oxygen could be easily activated and oxidized at relatively high oxidation voltages. Thus, lithium-excess disordered rocksalts (DRX) should possess the potential for acting as active OER electrocatalysts, which catalyze through the LOM pathway. The isotope labelling experimental results show that the lattice oxygen in the DRX was activated and participated in the OER process through the LOM pathway. The typical DRX of Li1.2Fe0.4Ti0.5O2 displays obviously pH-dependent OER activity under the LOM process and shows a low overpotential of 263 mV to reach 10 mA cm-2 with long-term stability for 100 hours. The turnover frequency of Li1.2Fe0.4Ti0.5O2 is nearly 9 times that of LiFePO4 at the overpotential of 300 mV. This work opens a new chemical space for exploring efficient electrocatalysts to enhance the OER performance through the LOM pathway.
RESUMO
High-entropy oxide (HEO) including multiple principal elements possesses great potential for various fields such as basic physics, mechanical properties, energy storage, and catalysis. However, the synthesis method of high-entropy compounds through the traditional heating approach is not conducive to the rapid properties screening, and the current elemental combinations of HEO are also highly limited. Herein, we report a rapid synthesis method for HEO through the Joule-heating of nickel foil with dozens of seconds. High-entropy rocksalt oxides (HERSO) with the new elemental combination, high-entropy spinel oxides (HESO), and high-entropy perovskite oxide (HEPO) have been synthesized through the Joule-heating. The synthesized HERSO with new elemental combinations proves to be a great promotion of OER activity due to the synergy of multiple components and the continuous electronic structure experimentally and theoretically. The demonstrated synthesis approach and the new component combination of HERSO provide a broad platform for the development of high-entropy materials and catalysts.
RESUMO
It is vitally important to develop highly active, robust and low-cost transition metal-based electrocatalysts for overall water splitting in neutral solution especially at large current density. In this work, amorphous Mo-doped NiS0.5 Se0.5 nanosheets@crystalline NiS0.5 Se0.5 nanorods (Am-Mo-NiS0.5 Se0.5 ) was synthesized using a facil one-step strategy. In phosphate buffer saline solution, the Am-Mo-NiS0.5 Se0.5 shows tiny overpotentials of 48 and 209â mV for hydrogen evolution reaction (HER), 238 and 514â mV for oxygen evolution reaction (OER) at 10 and 1000â mA cm-2 , respectively. Moreover, Am-Mo-NiS0.5 Se0.5 delivers excellent stability for at least 300â h without obvious degradation. Theoretical calculations revealed that the Ni sites in the defect-rich amorphous structure of Am-Mo-NiS0.5 Se0.5 owns higher electron state density and strengthened the binding energy of H2 O, which will optimize H adsorption/desorption energy barriers and reduce the adsorption energy of OER determining step.
RESUMO
The sluggish kinetics and mutual interference of oxygen evolution and reduction reactions in the air electrode resulted in large charge/discharge overpotential and low energy efficiency of Zn-air batteries. In this work, we designed a breathing air-electrode configuration in the battery using P-type Ca3 Co4 O9 and N-type CaMnO3 as charge and discharge thermoelectrocatalysts, respectively. The Seebeck voltages generated from thermoelectric effect of Ca3 Co4 O9 and CaMnO3 synergistically compensated the charge and discharge overpotentials. The carrier migration and accumulation on the cold surface of Ca3 Co4 O9 and CaMnO3 optimized the electronic structure of metallic sites and thus enhanced their intrinsic catalytic activity. The oxygen evolution and reduction overpotentials were enhanced by 101 and 90â mV, respectively, at temperature gradient of 200 °C. The breathing Zn-air battery displayed a remarkable energy efficiency of 68.1 %. This work provides an efficient avenue towards utilizing waste heat for improving the energy efficiency of Zn-air battery.
RESUMO
Development of efficient non-noble metal catalysts for water splitting is of great significance but challenging due to the sluggish kinetics of the hydrogen evolution reaction (HER) in alkaline medium. Herein, a bimetallic multi-level layered catalytic electrode composed of Ni3 S2 nanosheets with secondary Co-NiOOH layer of 3D porous and free-standing cathode in alkaline medium is reported. This integrated synergistic catalytic electrode exhibits excellent HER electrocatalytic performance. The resultant Ni0.67 Co0.33 /Ni3 S2 @NF electrode displays the highest HER activity with only overpotentials of 87 and 203 mV to afford current densities of 10 and 100 mA·cm-2 , respectively, and its Tafel slope is 80 mV·dec-1 . The chronopotentiometry operated at high current density of 50 mA·cm-2 shows negligible deterioration, indicating better stability of Ni0.67 Co0.33 /Ni3 S2 @NF electrode than Pt/C (20 wt.%). Such a desirable catalytic performance is attributed to the modification of physical and electronic structure that exposes abundant active sites and improves the intrinsic catalytic activity toward HER, which is also confirmed by electrochemically active surface area and X-ray photoelectron spectroscopy analysis. This work provides a strong support for the rational design of high-performance bimetallic electrodes for industrial water splitting.
RESUMO
Owing to their unique electronic structure and maximum atom utilization efficiency, single-atom catalysts have received widespread attention and exhibited efficient activity. Herein, we report the preparation of non-metal Se single atoms embedded in nitrogen-doped carbon (NC) via a high-temperature reduction strategy for electrocatalytic oxygen reduction reaction (ORR). Selenium dioxide is reduced to selenium by NC at high temperature and partially anchored to form C-Se-C bond. Impressively, the obtained single-atom catalyst exhibits outstanding ORR activity and stability that even surpasses state-of-the-art noble metal catalysts and many previously reported nanocatalysts. Experimental and theoretical calculations reveal that the Se single atoms can serve as the ORR active sites and contribute to lowering the reaction barrier. Our discoveries demonstrate the promising prospects for utilizing metal-free single-atom-based materials for efficient electrocatalysis.
RESUMO
This study assessed the protective effects of paeoniflorin against preeclampsia-related endothelial damage (ED). Human umbilical vein endothelial cells (HUVECs) isolated from healthy puerperae were identified by immunofluorescence assay. After paeoniflorin treatment, HUVECs were induced by soluble fms-like tyrosine kinase 1 (sFlt-1) and soluble endoglin (sEng) to establish ED. Cell viability, migration, invasion, tube formation, and apoptosis were assessed by (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) tetrazolium MTT assay, Scratch assay, Transwell assay, tube formation assay, and flow cytometry. VEGFA expression in HUVECs was analyzed by Western blot. HUVECs were successfully isolated and identified as Von Willebrand factor (vWF) positive. Individual treatment or cotreatment of sFlt-1 and sEng inhibited migration, invasion and tube formation, enhanced apoptosis, and decreased VEGFA expression in HUVECs. Paeoniflorin pretreatment partially reversed the effects delivered by cotreatment of sFlt-1 and sEng in HUVECs. Paeoniflorin alleviated preeclampsia-related ED caused by overexpression of sFlt-1 and sEng by upregulating VEGFA.
Assuntos
Endoglina/metabolismo , Endotélio Vascular/efeitos dos fármacos , Glucosídeos/farmacologia , Monoterpenos/farmacologia , Pré-Eclâmpsia/metabolismo , Fator A de Crescimento do Endotélio Vascular/metabolismo , Receptor 1 de Fatores de Crescimento do Endotélio Vascular/metabolismo , Endotélio Vascular/fisiopatologia , Feminino , Células Endoteliais da Veia Umbilical Humana , Humanos , GravidezRESUMO
Tuning the electronic states near the Fermi level can effectively facilitate the reaction kinetics. However, elucidating the role of a specific electronic state of metal oxide in simultaneously regulating the CO2 electroreduction reaction (CO2 RR) and competing hydrogen evolution reaction (HER) is still rare, making it difficult to accurately predict the practical CO2 RR performance. Herein, replacing the Zn site by heteroatoms with different outer electrons (Mo and Cu) is found to tune both occupied and unoccupied orbitals near the Fermi level of ZnO. Moreover, the different electronic states significantly modulate both CO2 RR and HER activity with a totally inverse trend, thus dramatically tuning the practical CO2 RR performance. In parallel, the correlation between electronic states, reaction free energies and practical activity is demonstrated. This work provides a possibility for engineering efficient CO2 RR eletrocatalysts through tunable composition and electronic structures.
RESUMO
Cervical cancer (CC) is one of the most prevalent malignances among women. However, the mechanism underlying CC development remains elusive. Recently, circular RNAs (circRNAs) have been known as important regulators in tumorigenesis. Whether circRNAs are involved in CC requires to be determined. In the present study, we found that circRNA hsa_circ_0023404 was significantly upregulated in CC tissues compared to adjacent normal tissues. And its overexpression was correlated with poor prognosis in CC patients. Functionally, we showed that knockdown of hsa_circ_0023404 significantly suppressed the proliferation, arrested the cell-cycle progression and inhibited cell migration and invasion in CC. In terms of mechanism, we found that hsa_circ_0023404 acted as a sponge of miR-136 and miR-136 targeted TFCP2, which is an activator of YAP signaling pathway. We showed that hsa_circ_0023404 activated YAP pathway in CC via promoting TFCP2 expression by sponging miR-136, leading to CC development and progression. Taken together, our study for the first time demonstrated the pivot role of hsa_circ_0023404 and revealed a novel regulatory loop of hsa_circ_0023404/miR-136/TFCP2/YAP axis in CC progression.
Assuntos
Regulação Neoplásica da Expressão Gênica , MicroRNAs/genética , Neoplasias do Colo do Útero/genética , Proteínas Adaptadoras de Transdução de Sinal/genética , Proteínas Adaptadoras de Transdução de Sinal/metabolismo , Movimento Celular/genética , Proliferação de Células/genética , Proteínas de Ligação a DNA/genética , Feminino , Técnicas de Silenciamento de Genes , Humanos , Estimativa de Kaplan-Meier , Pessoa de Meia-Idade , Fosfoproteínas/genética , Fosfoproteínas/metabolismo , Prognóstico , Transdução de Sinais/genética , Fatores de Transcrição/genética , Neoplasias do Colo do Útero/mortalidade , Neoplasias do Colo do Útero/patologia , Proteínas de Sinalização YAPRESUMO
Exploiting economical and high-performance bifunctional electrocatalysts toward hydrogen and oxygen evolution reactions (HER/OER) is at the heart of overall water splitting in large-scale application. Herein, an in situ and stepwise strategy for synthesizing core-shell Ni3 (S1-x Sex )2 @NiOOH (0 ≤ x ≤ 1) nanoarray heterostructures on nickel foam with tailored compositions for enhancing water-splitting performance is reported. A series of Ni3 (S1-x Sex )2 nanostructures is firstly grown on nickel foam via an in situ reaction in a heated polyol solution system. Ni3 (S1-x Sex )2 @NiOOH nanocomposites are subsequently prepared via electrochemical oxidation and the oxidation degree is systematically investigated by varying the oxidation time. Benefitting from the vertical standing architecture, abundant exposed active sites, and synergetically interfacial enhancement, Ni3 (S0.25 Se0.75 )2 @NiOOH heterojunctions with electrochemical polarization for 8 h exhibit superior HER and OER behaviors, achieving a water-splitting current density of 10 mA cm-2 at a small overpotential of 320 mV as well as boosted reaction kinetics and long-term stability. This work should shed light on the controllable synthesis of metal-based hybrid materials and provide a promising direction for developing the highest-performing electrocatalysts based on interfacial and heterostructural regulation for advanced electrochemical energy conversion technologies.
RESUMO
Constructing structure-function relationships is critical for the rational design and development of efficient catalysts for CO2 electroreduction reaction (CO2RR). In2O3 is well-known for its specific ability to produce formic acid. However, how the crystal phase and surface affect the CO2RR activity is still unclear, making it difficult to further improve the intrinsic activity and screen for the most active structure. In this work, cubic and hexagonal In2O3 with different stable surfaces ((111) and (110) for cubic, (120) and (104) for hexagonal) are investigated for CO2RR. Theoretical results demonstrate that the adsorption of reactants on cubic In2O3 is stronger than that on hexagonal In2O3, with the cubic (111) surface being the most active for CO2RR. In experiments, synthesized cubic In2O3 nanosheets with predominantly exposed (111) surfaces exhibited a high HCOO- Faradaic efficiency (87.5%) and HCOO- current density (-16.7 mA cm-2) at -0.9 V vs RHE. In addition, an aqueous Zn-CO2 battery based on a cubic In2O3 cathode was assembled. Our work correlates the phases and surfaces with the CO2RR activity, and provides a fundamental understanding of the structure-function relationship of In2O3, thereby contributing to further improvements in its CO2RR activity. Moreover, the results provide a principle for the directional preparation of materials with optimal phases and surfaces for efficient electrocatalysis.
RESUMO
Dual-atom catalytic sites on conductive substrates offer a promising opportunity for accelerating the kinetics of multistep hydrogen and oxygen evolution reactions (HER and OER, respectively). Using MXenes as substrates is a promising strategy for depositing those dual-atom electrocatalysts, if the efficient surface anchoring strategy ensuring metal-substrate interactions and sufficient mass loading is established. We introduce a surface-modification strategy of MXene substrates by preadsorbing L-tryptophan molecules, which enabled attachment of dual-atom Co/Ni electrocatalyst at the surface of Ti3C2Tx by forming N-Co/Ni-O bonds, with mass loading reaching as high as 5.6 wt %. The electron delocalization resulting from terminated O atoms on MXene substrates, N atoms in L-tryptophan anchoring moieties, and catalytic metal atoms Co and Ni provides an optimal adsorption strength of intermediates and boosts the HER and OER kinetics, thereby notably promoting the intrinsic activity of the electrocatalyst. CoNi-Ti3C2Tx electrocatalyst displayed HER and OER overpotentials of 31 and 241 mV at 10 mA cm-2, respectively. Importantly, the CoNi-Ti3C2Tx electrocatalyst also exhibited high operational stability for both OER and HER over 100 h at an industrially relevant current density of 500 mA cm-2. Our study provided guidance for constructing dual-atom active metal sites on MXene substrates to synergistically enhance the electrochemical efficiency and stability of the energy conversion and storage systems.
RESUMO
Electronic devices based on tin halide perovskites often exhibit a poor operational stability. Here, we report an additive engineering strategy to realize high-performance and stable field-effect transistors (FETs) based on 3D formamidinium tin iodide (FASnI3) films. By comparatively studying the modification effects of two additives, i.e., phenethylammonium iodide and 4-fluorophenylethylammonium iodide via combined experimental and theoretical investigations, we unambiguously point out the general effects of phenethylammonium (PEA) and its fluorinated derivative (FPEA) in enhancing crystallization of FASnI3 films and the unique role of fluorination in reducing structural defects, suppressing oxidation of Sn2+ and blocking oxygen and water involved defect reactions. The optimized FPEA-modified FASnI3 FETs reach a record high field-effect mobility of 15.1 cm2/(V·s) while showing negligible hysteresis. The devices exhibit less than 10% and 3% current variation during over 2 h continuous bias stressing and 4200-cycle switching test, respectively, representing the best stability achieved so far for all Sn-based FETs.
RESUMO
The state-of-the-art active hydrogen evolution reaction (HER) catalysts in acid electrolytes generally lose considerable catalytic performance in alkaline electrolytes mainly due to the additional water dissociation step. Designing composite materials is an effective strategy to accelerate alkaline water electrolysis by optimizing the electronic structure of materials. Here, different phases of Co(OH)2 -supported Ru clusters (α/ß-Co(OH)2 @Ru) are prepared for enabling a highly efficient electrocatalytic HER performance in alkaline solution. The prepared α-Co(OH)2 nanosheets facilitate the loading of uniform and high-density Ru clusters and the formed highly active RuOCo bonds at the interface. The synergistic interaction endows the hybrid catalyst with low overpotential of 33 mV at 10 mA cm-2 . Moreover, the homemade anion exchange membrane water electrolysis cell based on α-Co(OH)2 @Ru affords a cell voltage of 2 V to drive a current density of 270 mA cm-2 and performs stably during continuous operation for over 100 h. Density functional theory calculations demonstrate that active RuOCo bonds in α-Co(OH)2 @Ru optimize the energy barriers for H2 O dissociation and OH- desorption to facilitate the Volmer reaction step. This work offers a strategy for designing interfacial chemical bonds for high electrocatalytic activity.
RESUMO
The main obstacle to the development of large-scale electrochemical hydrogen production based on water splitting is the slow four-electron kinetics of OER (oxygen evolution reaction). The most efficient method is to create sophisticated and effective OER catalysts. Here, we proposed the controlled synthesis of high-entropy layered double hydroxides (HELDH) for wide component regulation and the component design of high OER activity to make up for the restricted component regulation in conventional catalysts. Through the use of coprecipitation and hydrothermal synthesis, the representative sample (MgCoNi)3(FeAl)-LDH is created and systematically characterized. Significantly, this technique of preparation may generically synthesize a variety of HELDH with various component combinations, demonstrating the remarkable adaptability of the HELDH components. Subsequently, (FeCoNi)3(FeCr)-LDH with high OER activity is designed and synthesized. (FeCoNi)3(FeCr)-LDH shows excellent OER activity (overpotential is only 230 mV at 10 mA cm-2). A new platform for the creation of high-performance catalysts and high-entropy materials was established by the synthesis and design of HELDH.
RESUMO
Facilitating the efficient activation of N2 molecules and inhibiting the competing hydrogen evolution reaction remain a challenge in the nitrogen reduction reaction (NRR). A heteroatom doping strategy is an effective way to optimize the energy barrier during the NRR process to improve the catalytic efficiency. Herein, we report Ni-doped Mo2C anchored on graphitized porous conductive carbon for regulating the electronic structure and catalytic properties of electrocatalysts toward NRR. Benefiting from the porous structure and graphitization features of the carbon matrix, more active sites and high electronic conductivity were achieved. Meanwhile, with the doping of Ni atoms, the electronic configuration near the Ni-Mo active sites was optimized and the adsorption of N2 on them was also promoted due to the increased electron transfer. Moreover, the lowered energy barrier of the NRR process and the suppressed hydrogen adsorption on the active site all resulted in the high catalytic activity and selectivity of the catalyst. Therefore, a high NH3 yield rate of 46.49 µg h-1 mg-1 and a faradic efficiency of 29.05% were achieved. This work not only validates the important role of heteroatom doping on the regulation of NRR catalytic activity but also provides a promising avenue for the green synthesis of NH3.