Efficient Atmospheric Water Harvesting of Superhydrophilic Photothermic Nanocapsule.

Drought and water scarcity are two of the world's major problems. Solar-powered sorption-based atmospheric water harvesting technology is a promising solution in this category. The main challenge is to design materials with high water harvesting performance while achieving fast water vapor adsorption/desorption rates. Here, a superhydrophilic photothermic hollow nanocapsule (SPHN) is represented that achieves efficient atmospheric water harvesting in outdoor climates. In SPHN, the hollow mesoporous silica (HMS) is grafted with polypyrrole (PPy) and also loaded with lithium chloride (LiCl). The hollow structure is used to store water while preventing leakage. The hydrophilic spherical nanocapsule and the trapped water produce more free and weakly adsorbed water. Significantly lower the heat of desorption compared to pure LiCl solution. Such SPHN significantly improves the adsorption/desorption kinetics, e.g., absorbs 0.78-2.01 g of water per gram of SPHN at 25 °C, relative humidity (RH) 30-80% within 3 h. In particular, SPHN has excellent photothermal properties to achieve rapid water release under natural sunlight conditions, i.e., 80-90% of water is released in 1 h at 0.7-1.0 kW m-2 solar irradiation, and 50% of water is released even at solar irradiation as low as 0.4 kW m-2 . The water collection capacity can reach 1.2 g g-1 per cycle by using the self-made atmospheric water harvesting (AWH) device. This finding provides a way to design novel materials for efficient water harvesting tasks, e.g., water engineering, freshwater generator, etc.

Water Harvesting of Bioinspired Microfibers with Rough Spindle-Knots from Microfluidics.

Heterostructure rough spindle-knot microfibers (HRSFs) are fabricated via a flexible parallel-nozzle microfluidic method. In this method, the bioinspired HRSF with a roughness gradient between spindle-knots and joints, can be manufactured in large-scale, and with which the size of the spindle-knots and joints can be precisely adjusted by regulating flow rates. The HRSFs, fabricated with chitosan and calcium alginate, have strong mechanical properties and corrosion resistance in acid environment (pH = 5) and alkaline environment (pH = 9), respectively. More attractively, under controlled treatment conditions, the morphology of the spindle-knots on the HRSFs can be effectively managed by changing the composite content of calcium chloride in the fluid. During the water collection process, tiny droplets of moisture can be captured on the surface of the HRSFs, subsequently, the droplets can coalesce and be transported from joint to spindle-knot sections. It is demonstrated that the surface morphology of spindle-knots directly influences the water collection efficiency, where a higher roughness gradient generates higher water collection efficiency. This parallel-nozzle microfluidic technology provides a low-cost and flexible method to manufacture high biocompatibility bioinspired rough spindle-knot microfibers, which has many potential applications in large-scale water collection, sustained drug release, and directional water collection.

Excellent Fog-Droplets Collector via Integrative Janus Membrane and Conical Spine with Micro/Nanostructures.

Inspired by a cactus spine and trichomes integrated fog collection system, a strategy is presented to design a micro/nanostructured conical spine and Janus membrane integrative system (MNCS+JM). In this strategy, the surface of conical spine can be covered with rough micro and nanostructure (MNCS), so that the tiny fog-droplets can be captured, coalesced, and transported. Janus membrane (JM) with inside hydrophobic surface and outside hydrophilic surface is further used to control the water collection in process of droplet transport when the Janus membrane is vertically placed with different positions on the MNCS, thus MNCS+JM propel the droplet continuously for transport-coalescence-transport in a circle of droplet transport and collection. It is demonstrated that a higher fog collection rate can be achieved effectively, which is attributed to a cooperation effect between the Laplace pressure in difference and the released surface energy in droplet coalescence, in addition to wettability force of superhydrophobic-hydrophilic difference in the Janus membrane. This strategy of MNCS+JM offers an insight into the surface of materials to control the droplet transport for water collection in efficiency, which is significant to be extended into the realms of applications such as high-efficiency water collection systems, microfluidics devices, and others.

Directional water collection on wetted spider silk.

Many biological surfaces in both the plant and animal kingdom possess unusual structural features at the micro- and nanometre-scale that control their interaction with water and hence wettability. An intriguing example is provided by desert beetles, which use micrometre-sized patterns of hydrophobic and hydrophilic regions on their backs to capture water from humid air. As anyone who has admired spider webs adorned with dew drops will appreciate, spider silk is also capable of efficiently collecting water from air. Here we show that the water-collecting ability of the capture silk of the cribellate spider Uloborus walckenaerius is the result of a unique fibre structure that forms after wetting, with the 'wet-rebuilt' fibres characterized by periodic spindle-knots made of random nanofibrils and separated by joints made of aligned nanofibrils. These structural features result in a surface energy gradient between the spindle-knots and the joints and also in a difference in Laplace pressure, with both factors acting together to achieve continuous condensation and directional collection of water drops around spindle-knots. Submillimetre-sized liquid drops have been driven by surface energy gradients or a difference in Laplace pressure, but until now neither force on its own has been used to overcome the larger hysteresis effects that make the movement of micrometre-sized drops more difficult. By tapping into both driving forces, spider silk achieves this task. Inspired by this finding, we designed artificial fibres that mimic the structural features of silk and exhibit its directional water-collecting ability.

Bioinspired one-dimensional materials for directional liquid transport.

One-dimensional materials (1D) capable of transporting liquid droplets directionally, such as spider silks and cactus spines, have recently been gathering scientists' attention due to their potential applications in microfluidics, textile dyeing, filtration, and smog removal. This remarkable property comes from the arrangement of the micro- and nanostructures on these organisms' surfaces, which have inspired chemists to develop methods to prepare surfaces with similar directional liquid transport ability. In this Account, we report our recent progress in understanding how this directional transport works, as well our advances in the design and fabrication of bioinspired 1D materials capable of transporting liquid droplets directionally. To begin, we first discuss some basic theories on droplet directional movement. Then, we discuss the mechanism of directional transport of water droplets on natural spider silks. Upon contact with water droplets, the spider silk undergoes what is known as a wet-rebuilt, which forms periodic spindle-knots and joints. We found that the resulting gradient of Laplace pressure and surface free energy between the spindle-knots and joints account for the cooperative driving forces to transport water droplets directionally. Next, we discuss the directional transport of water droplets on desert cactus. The integration of multilevel structures of the cactus and the resulting integration of multiple functions together allow the cactus spine to transport water droplets continuously from tip to base. Based on our studies of natural spider silks and cactus spines, we have prepared a series of artificial spider silks (A-SSs) and artificial cactus spines (A-CSs) with various methods. By changing the surface roughness and chemical compositions of the artificial spider silks' spindle-knots, or by introducing stimulus-responsive molecules, such as thermal-responsive and photoresponsive molecules, onto the spindle-knots, we can reversibly manipulate the direction of water droplet's movement on the prepared A-SSs. In addition, the A-SSs with nonuniform spindle-knots, such as multilevel sized spindle-knots and gradient spindle-knots, further demonstrate integrated directional transport ability for water droplets. Through mimicking the main principle of cactus spines in transporting water droplets, we were able to fabricate both single and array A-CSs, which are able to transport liquid droplets directionally both in air and under water. Lastly, we demonstrated some applications of this directional liquid transport, from aspects of efficient fog collection to oil/water separation. In addition, we showed some potential applications in smart catalysis, tracer substance enrichment, smog removal, and drug delivery.

Controlling of water collection ability by an elasticity-regulated bioinspired fiber.

A special artificial spider silk is presented which is fabricated by using both an elastic polymer and a fiber, and the water collection behavior is investigated. Through exerting tension in varying degree, the length of the three-phase contact line (TCL) and the area of spindle knot can be regulated readily, which makes a great contribution to the improvement of collecting efficiency and water-hanging ability. The water-hanging ability can be predicted at a given stretching ratio according to the given expression of the TCL. As a result, liquid capture or release of distinct measure can be achieved via exerting tension. This research is helpful to design smart materials for developing applications in fogwater collection, dehumidification, high-efficiency humidity control, and controllable adhesion.

Controlled directional water-droplet spreading on a high-adhesion surface.

Controlled directional spreading of a droplet on a smart high-adhesion surface was made possible by simply controlling anodic oxidation. The wettability gradient of the surface was controlled from 0.14 to 3.38° mm(-1) by adjusting the anodic oxidation conditions. When a water droplet made contact with the substrate, the droplet immediately spread in the direction of the wettability gradient but did not move in other directions, such as those perpendicular to the gradient direction, even when the surface was turned upside down. The spreading behavior was mainly controlled by the wettability gradient. Surfaces with a V- or inverse-V-shaped wettability gradient were also formed by the same method, and two droplets on these surfaces spread either toward or away from one another as designed. This method could be used to oxidize many conductive substrates (e.g., copper, aluminum) to form surfaces with variously shaped wettability gradients. It has potential for application in microfluidic devices.

Robust Photothermal Icephobic Surface with Mechanical Durability of Multi-Bioinspired Structures.

Photothermal superhydrophobic surfaces are potential to become ideal anti-/deicing surfaces due to their rapid water removal, icing delay, and photothermal deicing performance. Here, a robust photothermal icephobic surface with mechanical durability is shown that is integrated with a microspine array inspired by honeycomb and cactus thorn (i.e., MAHC), which is developed by a laser-layered microfabrication strategy. The maximum stress on the microspine of the MAHC is reduced by ≈2/3, due to the protection of the bionic honeycomb structure. Even after 200 linear abrasions by a steel blade, the MAHC remains superior water repellency with a water contact angle of 150.7° and roll-off angles of 10.3°, stable icing delay time (578.2 s), and rapidly photothermal deicing capabilities (401 s). As the MAHC is fabricated on a curvature surface such as a copper alloy transmission line for an overhead high-speed rail, a stable photothermal anti-/deicing in a low-temperature environment still can be achieved effectively. The freezing rain covering the functional transmission line completely slides off within 758 s under one sun illumination. This studying offers insight into the design of novel materials with stable anti-icing/icephobic structures, which would be extended into some applied realms, for example, transportation fields or power systems in cold or low-temperature climates.

Gradient-Janus Wires for Simultaneous Fogwater Harvesting and Electricity Generation.

A Gradient-Janus wire (GJW) with a diameter of 0.3 mm has been fabricated on a large scale through liquid confined modification, enabling the opposite conical wetting phenomenon along the same orientation of the GJW, characterized by an increasing superhydrophilic region and a decreasing hydrophobic region. This property allows the GJW to exhibit controllable water hovering, transport, and pinning during fog harvesting, i.e., at a large tilting angle α of 60° (mass increased with decreased α), the GJW can hover 0.6 mg of harvested fogwater in 30 s, can transport 3 mg of fogwater along the gradient in 30 s at α = 4° (with maximal mass reaching up to 4.3 mg at α = -10°), and finally, pin the water droplet at the end of the GJW. Such ability generates an effective torque that serves as the driving force for rotation. We designed a GJWs-wheel by radially arranging 60 GJWs together, resulting in an extremely lightweight structure weighing only 1.9 g. The cumulative torque generated during fog harvesting activates the rotation of the GJWs-wheel. When loaded with a coil within a magnetic field, electricity is generated as output power peaks at around 0.25 µW while maintaining a high water harvesting efficiency averaging approximately 38 ± 2.12 mg/min. This finding is significant as it provides valuable insights into designing materials capable of efficiently harnessing both energy and water resources.

An Atmospheric Water-Harvester with Ultrahigh Uptake-Release Efficiency at Low Humidity.

Atmospheric water harvesting is a practical strategy that is achieved by removing materials from air moisture to relieve global water scarcity. Here we design a water-harvester (i.e., MOF-303/thiolated polymer composite (MTC)) by using a metal-organic framework (MOF-303) and thiolated chitosan (TC) skeleton. Intermolecular hydrogen bonding between TC and MOF-303 facilitates porous structures with enlarged air-polymer interfaces for long cycling life and high capacity at low relative humidity. Benefiting from synergetic effects on porosity and anchorage for accelerating the uptake-release of moisture, MTC exhibits a rapid water uptake capacity of 0.135 g/g in 60 min under 12.5 RH% and ultrafast water desorption kinetics of 0.003 g/g/min at 8.5 RH%, which is superior to the as-reported MOF-303 based adsorbents. At low heat (∼40 °C), the water desorption and collection rate, respectively, are 0.0195 and 0.0168 g/g/min within 210 min, showing ultrahigh harvesting efficiency. These results highlight the enormous potential as promising materials for solving the world's water scarcity crisis. This study offers an insight into the design of AWH materials, which can be extended into applications in some realms, e.g., freshwater development for industry in arid areas, water engineering-related devices and systems, etc.

Polyvinyl chloride and polybutylene adipate microplastics affect peanut and rhizobium symbiosis by interfering with multiple metabolic pathways.

Microplastics (MPs), widely presented in cultivated soil, have caused serious stresses on crop growth. However, the mechanism by which MPs affect legumes and rhizobia symbiosis is still unclear. Here, peanut seedlings were inoculated with Bradyrhizobium zhanjiangense CCBAU 51778 and were grown in vermiculite with 3 %/5 % (w/w) addition of PVC (polyvinyl chloride)-MPs/PBAT (polybutylene adipate)-MPs. PVC-MPs and PBAT-MPs separately decreased nodule number by 33-100 % and 2.62-80.91 %. Transcriptome analysis showed that PVC-MPs affected more DEGs (differentially expressed genes) than PBAT-MPs, indicating PVC-MPs were more devastating for the symbiosis than PBAT-MPs. Functional annotation revealed that PVC-MPs and PBAT-MPs enriched DEGs related to biosynthesis pathways such as flavonoid, isoflavonoid, and phenylpropanoid, in peanut. And when the dose increased from 3 % to 5 %, PVC-MPs mainly enriched the pathways of starch and sucrose metabolism, alanine, aspartate and glutamate metabolism, diterpenoid biosynthesis, etc.; PBAT-MPs enriched cysteine and methionine metabolism, photosynthesis, MAPK signaling, and other pathways. These significantly enriched pathways functioned in reducing nodule number and promoting peanut tolerance to MPs stresses. This study reveals the effect of PVC-MPs and PBAT-MPs on peanut and rhizobium symbiosis, and provides new perspectives for legume production and environmental safety.

Loratidine is associated with improved prognosis and exerts antineoplastic effects via apoptotic and pyroptotic crosstalk in lung cancer.

BACKGROUND: Tumor-associated inflammation suggests that anti-inflammatory medication could be beneficial in cancer therapy. Loratadine, an antihistamine, has demonstrated improved survival in certain cancers. However, the anticancer mechanisms of loratadine in lung cancer remain unclear. OBJECTIVE: This study investigates the anticancer mechanisms of loratadine in lung cancer. METHODS: A retrospective cohort of 4,522 lung cancer patients from 2006 to 2018 was analyzed to identify noncancer drug exposures associated with prognosis. Cellular experiments, animal models, and RNA-seq data analysis were employed to validate the findings and explore the antitumor effects of loratadine. RESULTS: This retrospective study revealed a positive association between loratadine administration and ameliorated survival outcomes in lung cancer patients, exhibiting dose dependency. Rigorous in vitro and in vivo assays demonstrated that apoptosis induction and epithelial-mesenchymal transition (EMT) reduction were stimulated by moderate loratadine concentrations, whereas pyroptosis was triggered by elevated dosages. Intriguingly, loratadine was found to augment PPARγ levels, which acted as a gasdermin D transcription promoter and caspase-8 activation enhancer. Consequently, loratadine might incite a sophisticated interplay between apoptosis and pyroptosis, facilitated by the pivotal role of caspase-8. CONCLUSION: Loratadine use is linked to enhanced survival in lung cancer patients, potentially due to its role in modulating the interplay between apoptosis and pyroptosis via caspase-8.

A UV-Resistant Heterogeneous Wettability-Patterned Surface.

Preparing UV-resistant heterogeneous wettability patterns is critical for the practical application of surfaces with heterogeneous wettability. However, combining UV-resistant superhydrophobic and superhydrophilic materials on heterogeneous surfaces is challenging. Inspired by the structure of cell membranes, a UV-resistant heterogeneous wettability-patterned surface (UPS) is designed via laser ablation of the coating of multilayer structures. UV-resistant superhydrophobic silica patterns can be created in situ on surfaces covered with superhydrophilic TiO2 nanoparticles. The UV resistance time of the UPS with a TiO2 -based surface is more than two orders of magnitude higher than that obtained with other surface molecular modification methods that require a mask. The cell-membrane-like structure of the UPS regulates the migration of internal siloxane chain segments in the hydrophilic and hydrophobic regions of the surface. The UPS enables efficient patterning of functional materials under UV irradiation, controlling the wetting behavior of liquids in open-air systems. Furthermore, its heterogeneous wettability remains stable even after 50 h of intense UV irradiation (365 nm, 500 mW cm-2 ). These UV-resistant heterogeneous wettability patterned surfaces will likely be applied in microfluidics, cell culture, energy conversion, and water collection in the future.

Nitrogen fertilization rates mediate rhizosphere soil carbon emissions of continuous peanut monoculture by altering cellulose-specific microbess.

Introduction: Crops influence both soil microbial communities and soil organic carbon (SOC) cycling through rhizosphere processes, yet their responses to nitrogen (N) fertilization have not been well investigated under continuous monoculture. Methods: In this study, rhizosphere soil microbial communities from a 5-year continuous mono-cropped peanut land were examined using Illumina HighSeq sequencing, with an N fertilization gradient that included 0 (N0), 60 (N60), 120 (N120) and 180 (N180) kg hm-2. Soil respiration rate (R s) and its temperature sensitivity (Q 10) were determined, with soil carbon-acquiring enzyme activities assayed. Results and discussion: The obtained results showed that with N fertilization, soil mineral N (Nmin) was highly increased and the soil C/N ratio was decreased; yields were unchanged, but root biomass was stimulated only at N120. The activities of ß-1,4-glucosidase and polyphenol oxidase were reduced across application rates, but that of ß-1,4-cellobiohydrolase was increased only at N120. Bacterial alpha diversity was unchanged, but fungal richness and diversity were increased at N60 and N120. For bacterial groups, the relative abundance of Acidobacteria was reduced, while those of Alphaproteobacteria and Gammaproteobacteria were increased at N60 and N120. For fungal members, the pathogenic Sordariomycetes was inhibited, but the saprotrophic Agaricomycetes was promoted, regardless of N fertilization rates. RDA identified different factors driving the variations in bacterial (root biomass) and fungal (Nmin) community composition. N fertilization increased R s slightly at N60 and significantly at N120, mainly through the promotion of cellulose-related microbes, and decreased R s slightly at N180, likely due to carbon limitation. N fertilization reduced microbial biomass carbon (MBC) at N60, N120 and N180, decreased SOC at N120 and N180, and suppressed dissolved organic carbon (DOC) at N180. In addition, the unchanged Q 10 may be a joint result of several mechanisms that counteracted each other. These results are of critical importance for assessing the sustainability of continuously monocultured ecosystems, especially when confronting global climate change.

Highly Efficient Photothermal Icephobic/de-Icing MOF-Based Micro and Nanostructured Surface.

Photothermal materials have gained considerable attention in the field of anti-/de-icing due to its environmental friendliness and energy saving. However, it is always significantly challenging to obtain solar thermal materials with hierarchical structure and simultaneously demonstrate both the ultra-long icing delay ability and the superior photothermal de-icing ability. Here, a photothermal icephobic MOF-based micro and nanostructure surface (MOF-MNS) is presented, which consists of micron groove structure and fluorinated MOF nanowhiskers. The optimal MOF-M250 NS can achieve solar absorption of over 98% and produce a high temperature increment of 65.5 °C under 1-sun illumination. Such superior photothermal-conversion mechanism of MOF-M250 NS is elucidated in depth. In addition, the MOF-M250 NS generates an ultra-long icing delay time of ≈3960 s at -18 °C without solar illumination, achieving the longest delay time, which isn't reported before. Due to its excellent solar-to-heat conversation ability, accumulated ice and frost on MOF-M250 NS can be rapidly melted within 720 s under 1-sun illumination and it also holds a high de-icing rate of 5.8 kg m-2 h-1 . MOF-M250 NS possesses the versatility of mechanical robustness, chemical stability, and low temperature self-cleaning, which can synergistically reinforce the usage of icephobic surfaces in harsh conditions.

"Major pathologic response" in lymph nodes: a modified nodal classification for non-small cell lung cancer patients treated with neoadjuvant immunochemotherapy.

We aim to examine the prognostic value of major pathologic response in metastatic lymph nodes (mLN-MPR) after immunochemotherapy in non-small cell lung cancer (NSCLC), and demonstrate the pathological characteristic of regression in mLN. Adult patients consecutively undergone neoadjuvant immunochemotherapy and radical-intent surgery for initial stage cIII NSCLC between 2020 and 2021 were included. Hematoxylin- and eosin-stained slides of paraffinembedded sections of the degree of pathologic response in the primary tumor (PT) and its paired involved LNs were reviewed. Imaging mass cytometry was conducted to quantify the immunological status. With 10% as residual viable tumor (RVT) cutoff, mLN-MPR (HR: 0.34, 95%CI: 0.14-0.78; P = 0.011, ref: mLN-MPR(-)) showed more significant correlation with DFS than ypN0 (HR: 0.40, 95%CI: 0.17-0.94; P = 0.036, ref: ypN1-N2). And mLN-MPR combined with PT-MPR, compared with ypN stage combined with PT-MPR (p-value: 0.030 vs. 0.117), can better distinguished the DFS curves of the 4 subgroups of patients. mLN-MPR(+)/PT-MPR(+) patients had the best prognosis compared with other subgroups. Pathologic responses of RVT in PT and paired regional LNs [MPR inconsistency rate: 21/53 (39.6%)], and across different LNs could be inconsistent, especially in squamous cell carcinoma. RVT% in mLNs after immunochemotherapy appeared to be polarized [16 (30.2%) cases with RVT ≥ 70%; 34 (64.2%) with RVT ≤ 10%]. Partial regression of LN metastasis could present with distinct immune subtypes: immune-inflamed or immune-evacuation subtype, and the former presented with higher CD3, CD8, and PD-1 expression in the invasive margin. mLN-MPR demonstrated a potential prognostic value in predicting DFS in patients treated with neoadjuvant immunochemotherapy, but further research is needed to validate its usefulness for other survival outcomes, including OS.

Comparative analysis of the effects of conventional and biodegradable plastic mulching films on soil-peanut ecology and soil pollution.

In agricultural production, biodegradable plastic mulching film (Bio-PMF) has the potential to replace conventional plastic mulching film (CPMF) due to its degradability, but their impacts on soil-crop ecology are controversial. In this study, from 2019 to 2021, effects of CPMF and Bio-PMF on the soil-crop ecology and soil pollution were evaluated on a peanut farm. Compared to the Bio-PMF, an overall improvement in the soil-peanut ecology under the CPMF was observed, including an increase of 10.77 ± 4.8% in peanut yield, an amelioration of four soil physicochemical properties (total P and available P in the flowering stage, total P and temperature in the mature stage), an increase of rhizobacterial relative abundances in class level (Bacteroidia, Blastocatellia, Thermoleophilia and Vicinamibacteria in the flowering stage, Nitrospira and Bacilli in the mature stage) and genus level (RB41 and Bacillus in the flowering stage, Bacillus and Dongia in the mature stage), and an enhancement of soil nitrogen metabolism abilities (ureolysis, nitrification and aerobic ammonia in the flowering stage, nitrate reduction and nitrite ammonification in the mature stage). These preserved soil nutrients and temperature, reshaped rhizobacterial communities, and enhanced soil nitrogen metabolism abilities in the mature stage were obviously correlated with peanut yield under CPMF. However, such remarkable relations were not existed under Bio-PMF. In addition, compared with Bio-PMF, CPMF significantly increased the contents of dimethyl phthalate (DMP), diethyl phthalate (DEP), dibutyl phthalate (DBP) and microplastics (MPs) in soil by 79.93, 44.55, 138.72 and 14.1%, respectively. Thus, CPMF improved soil-peanut ecology and caused serious soil pollution, while Bio-PMF introduced little pollutants into the soil and had little impact on soil-peanut ecology. Based on these, the degradation ability of CPMF or the ecological improvement capacity of Bio-PMF should be improved to obtain the environmentally and soil-crop ecology friendly plastic film in the future.

Water collection behavior and hanging ability of bioinspired fiber.

Since the water-collecting ability of the wetted cribellate spider capture silk is the result of a unique fiber structure, bioinspired fibers have been researched significantly so as to expose a new water-acquiring route in fogging-collection projects. However, the design of the geometry of bioinspired fiber is related to the ability of hanging drops, which has not been investigated in depth so far. Here, we fabricate bioinspired fibers to investigate the water collection behavior and the influence of geometry (i.e., periodicity of spindle knot) on the hanging-drop ability. We especially discuss water collection related to the periodicity of geometry on the bioinspired fiber. We reveal the length of the three phase contact line (TCL) at threshold conditions in conjunction with the maximal volume of a hanging drop at different modes. The study demonstrates that the geometrical structure of bioinspired fiber induces much stronger water hanging ability than that of uniform fiber, attributed to such special geometry that offers effectively an increasing TCL length or limits the contact length to be shorted. In addition, the geometry also improves the fog-collection efficiency by controlling tiny water drops to be collected in the large water drops at a given location.

Large-scale fabrication of bioinspired fibers for directional water collection.

Spider-silk inspired functional fibers with periodic spindle-knots and the ability to collect water in a directional manner are fabricated on a large scale using a fluid coating method. The fabrication process is investigated in detail, considering factors like the fiber-drawing velocity, solution viscosity, and surface tension. These bioinspired fibers are inexpensive and durable, which makes it possible to collect water from fog in a similar manner to a spider's web.

Bioinspired super-antiwetting interfaces with special liquid-solid adhesion.

Super-antiwetting interfaces, such as superhydrophobic and superamphiphobic surfaces in air and superoleophobic interfaces in water, with special liquid-solid adhesion have recently attracted worldwide attention. Through tuning surface microstructures and compositions to achieve certain solid/liquid contact modes, we can effectively control the liquid-solid adhesion in a super-antiwetting state. In this Account, we review our recent progress in the design and fabrication of these bioinspired super-antiwetting interfaces with special liquid-solid adhesion. Low-adhesion superhydrophobic surfaces are biologically inspired, typically by the lotus leaf. Wettability investigated at micro- and nanoscale reveals that the low adhesion of the lotus surface originates from the composite contact mode, a microdroplet bridging several contacts, within the hierarchical structures. Recently high-adhesion superhydrophobic surfaces have also attracted research attention. These surfaces are inspired by the surfaces of gecko feet and rose petals. Accordingly, we propose two biomimetic approaches for the fabrication of high-adhesion superhydrophobic surfaces. First, to mimic a sticky gecko's foot, we designed structures with nanoscale pores that could trap air isolated from the atmosphere. In this case, the negative pressure induced by the volume change of sealed air as the droplet is pulled away from surface can produce a normal adhesive force. Second, we constructed microstructures with size and topography similar to that of a rose petal. The resulting materials hold air gaps in their nanoscale folds, controlling the superhydrophobicity in a Wenzel state on the microscale. Furthermore, we can tune the liquid-solid adhesion on the same superhydrophobic surface by dynamically controlling the orientations of microstructures without altering the surface composition. The superhydrophobic wings of the butterfly (Morpho aega) show directional adhesion: a droplet easily rolls off the surface of wings along one direction but is pinned tightly against rolling in the opposite direction. Through coordinating the stimuli-responsive materials and appropriate surface-geometry structures, we developed materials with reversible transitions between a low-adhesive rolling state and a high-adhesive pinning state for water droplets on the superhydrophobic surfaces, which were controlled by temperature and magnetic and electric fields. In addition to the experiments done in air, we also demonstrated bioinspired superoleophobic water/solid interfaces with special adhesion to underwater oil droplets and platelets. In these experiments, the high content of water trapped in the micro- and nanostructures played a key role in reducing the adhesion of the oil droplets and platelets. These findings will offer innovative insights into the design of novel antibioadhesion materials.