Ion Resource Recovery via Electrodialysis Fabricated with Poly(Arylene Ether Sulfone)-Based Anion Exchange Membrane in Organic Solvent System.

Ion resource recovery from organic wastewater is beneficial for achieving emission peaks and carbon neutrality targets. Advanced organic solvent-resistant anion exchange membranes (AEMs) for treating organic wastewater via electrodialysis (ED) are of significant interest. Herein, a kind of 3D network AEM based on poly(arylene ether sulfone) cross-linked with a flexible cross-linker (DBH) for ion resource recovery via ED in organic solvent system is reported. Investigations demonstrate that the as-prepared AEMs show excellent dimensional stability in 60% DMSO (aq.), 60% ethanol (aq.), and 60% acetone (aq.), respectively. For example, the optimized AEM shows very low swelling ratios of 1.04-1.10% in the organic solvents. ED desalination ratio can reach 99.1% after exposure of the AEM to organic solvents for 30 days, and remain > 99% in a mixture solution containing organic solvents and 0.5 m NaCl. Additionally, at a current density of 2.5 mA cm-2, the optimized AEM soaked in organic solvents for 30 days shows a high perm-selectivity (Cl-/SO4 2-) of 133.09 (vs 13.11, Neosepta ACS). The superior ED performance is attributed to the stable continuous sub-nanochannels within AEM confirmed by SAXS, rotational energy barriers, etc. This work shows the potential application of cross-linked AEMs for resource recovery in organic wastewater.

In Situ Electrochemical Rapid Induction of Highly Active γ-NiOOH Species for Industrial Anion Exchange Membrane Water Electrolyzer.

Limited by the strong oxidation environment and sluggish reconstruction process in oxygen evolution reaction (OER), designing rapid self-reconstruction with high activity and stability electrocatalysts is crucial to promoting anion exchange membrane (AEM) water electrolyzer. Herein, trace Fe/S-modified Ni oxyhydroxide (Fe/S-NiOOH/NF) nanowires are constructed via a simple in situ electrochemical oxidation strategy based on precipitation-dissolution equilibrium. In situ characterization techniques reveal that the successful introduction of Fe and S leads to lattice disorder and boosts favorable hydroxyl capture, accelerating the formation of highly active γ-NiOOH. The Density Functional Theory (DFT) calculations have also verified that the incorporation of Fe and S optimizes the electrons redistribution and the d-band center, decreasing the energy barrier of the rate-determining step (*O→*OOH). Benefited from the unique electronic structure and intermediate adsorption, the Fe/S-NiOOH/NF catalyst only requires the overpotential of 345 mV to reach the industrial current density of 1000 mA cm-2 for 120 h. Meanwhile, assembled AEM water electrolyzer (Fe/S-NiOOH//Pt/C-60 °C) can deliver 1000 mA cm-2 at a cell voltage of 2.24 V, operating at the average energy efficiency of 71% for 100 h. In summary, this work presents a rapid self-reconstruction strategy for high-performance AEM electrocatalysts for future hydrogen economy.

Polymer Backbone Chemistry Shapes the Alkaline Stability of Metallopolymer Anion-Exchange Membranes.

Anion-exchange membrane fuel cells and water electrolyzers have garnered significant attention in past years due to their potential role in sustainable and affordable energy conversion and storage. However, the chemical stability of the polymeric anion-exchange membranes (AEMs), the key component in these devices, currently limits their lifespan. Recently, metallopolymers have been proposed as chemically stable alternatives to organic cations, using metal centers as ion transporters. In metallopolymer AEMs, various properties such as alkaline stability, water uptake, flexibility, and performance, are determined by both the metal complex and polymer backbone. Herein we present a systematic study investigating the influence of the polymer backbone chemistry on some of these properties, focusing on the alkaline stability of low-oxophilicity gold metallopolymers. Despite the use of a common N-heterocyclic carbene ligand, upon gold metalation using the same reaction conditions, different polymer backbones end up forming different gold complexes. These findings suggest that polymer chemistry affects the metalation reaction in addition to the other properties relevant to AEM performance.

Semi-Interpenetrating Polymer Network Anion Exchange Membranes Based on Quaternized Polybenzoxazine and Poly(Vinyl Alcohol-Co-Ethylene) for Acid Recovery by Diffusion Dialysis.

Acid recovery from acidic waste is a pressing issue in current times. Chemical methods for recovery are not economically feasible and require significant energy input to save the environment. This study reported a semi-interpenetrating polymer network (semi-IPN) anion exchange membranes (AEMs) for acid recovery by diffusion dialysis with excellent dimensional stability, high oxidation stability, good acid dialysis coefficient (UH +) and high separation factor (S). Semi-IPN AEMs are prepared by ring-open cross-linked quaternized polybenzoxazine (AQBZ) with poly(vinyl alcohol-co-ethylene), where AQBZ is obtained by Mannich reaction and Menshutkin reaction. All four proportions of semi-IPNs exhibit clear micro-phase separation, which is conducive to ion transport. The water uptake (WU) of the four semi-IPNs ranges from 14.2 % to 19.2 %, while the swelling ratio (SR) remains between 8.7 % and 11.3 %. These results indicate that the cross-linked structure in the designed semi-IPNs effectively control swelling and ensure dimensional stability. The thermal degradation temperature (Td5) of semi-IPN4:6 to semi-IPN7:3 varies from 309 °C to 289 °C, with an oxidation stability weight loss rate (WOX) ranging from 91.5 % to 93.5 %, demonstrating excellent thermal stability and oxidation stability. The semi-IPNs also show good UH + values ranging from 11.9-16.3*10-3 m/h and high S values between 38.6 and 45.9, indicating the promising potential of the semi-IPNs.

Novel Fluorinated Anion Exchange Membranes Based on Poly(Pentafluorophenyl-Carbazole) with High Ionic Conductivity and Alkaline Stability for Fuel Cell Applications.

Constructing good microphase separation structures by designing different polymer backbones and ion-conducting groups is an effective strategy for improving the ionic conductivity and chemical stability of anion exchange membranes (AEMs). In this study, a series of AEMs based on the poly(pentafluorophenylcarbazole) backbone grafted with different cationic groups are designed and prepared to construct well-defined microphase separation morphology and improve the trade-off between the properties of AEMs. Highly hydrophobic fluorinated backbone and alkyl spaces enhance phase separation and construct interconnected hydrophilic channels for anion transport. The ionic conductivity of the PC-PF-QA membrane is 123 mS cm-1 at 80 °C, and the ionic conductivity of the PC-PF-QA membrane decreased by only 6% after 960 h of immersion at 60 °C in 1 M NaOH aqueous solution. The maximum peak power density of the single cell based on PC-PF-QA is 214 mW cm-2 at 60 °C.

Effects of Structurally Different Tertiary Amines on the Properties of Quaternized Anionic Exchange Membranes Potentially Applicable for Water Electrolysis.

In this work, two structurally different monoamines (trimethylamine [TMA] and N-methylpiperidine [N-MPip]) are used for the amination of a g-VBC-15 graft copolymer, obtained by the functionalization of a mechanically robust, commercially available styrene-butadiene block copolymer (SB) with vinylbenzyl chloride (VBC) via solution free-radical polymerization. Results demonstrate that g-VBC-15-based membranes quaternized with TMA have superior electrochemical performance than N-MPip counterparts; while, the mechanical properties are good and only slightly inferior to those of N-MPip. Therefore, TMA is the selected monoamine to be alternatively mixed with two polyamines (tetramethyl-1,3-propanediamine [TMPDA] and N,N,N',N'',N''-pentamethyldiethylenetriamine [PMDETA]) into different proportions, in order to modulate the average functionality of the amination mixture in terms of number of amine functional groups available for the quaternization reaction of the membranes. g-VBC-15-based membranes derived therefrom are extensively characterized to assess their thermal, mechanical, and ex situ electrochemical properties. Results indicate that membranes quaternized with a TMA/PMDETA mixture (90:10 in mole) display the highest conductivity among all the investigated membranes aminated with polyamine-based mixtures. Moreover, they have comparable mechanical and electrochemical properties to those quaternized with TMA, while exhibiting a reduced water uptake.

Rational Understanding Hydroxide Diffusion Mechanism in Anion Exchange Membranes during Electrochemical Processes with RDAnalyzer.

Enhancing the understanding of hydroxide transport mechanisms in anion exchange membranes (AEMs) is beneficial for the rational design of high-performance AEMs in the renewable energy system. However, the high complexity and lack of adequate analytic tools make it challenging to clarify different mechanisms unambiguously. Herein, we developed an in-house toolkit, the Reactive Diffusion Analyzer (RDAnalyzer), to conduct an effective analysis of hydroxide diffusion mechanisms from ReaxFF molecular dynamic simulations. Using the experimentally well-synthesized T20NC6NC5N as a model system, we successfully decoupled the hydroxide diffusion mechanisms into free Vehicular and free Grotthuss, as well as associated Vehicular and associated Grotthuss, which was not yet achieved previously. Meanwhile, RDAnalyzer managed to specifically identify the drift length of hydroxide species for each mechanism under the electric field, which worked as a useful variable for calculating the conductivity of AEMs. Our theoretically predicted conductivity for T20NC6NC5N agrees reasonably with experimental results, indicating the reliability of RDAnalyzer. This work not only provides a rational understanding of the complex hydroxide diffusion mechanisms in AEMs but also holds the potential to guide the rational design of high-performance AEMs with computations.

Ultrathin Free-Standing Porous Aromatic Framework Membranes for Efficient Anion Transport.

Porous aromatic frameworks (PAFs) show promising potential in anionic conduction due to their high stability and customizable functionality. However, the insolubility of most PAFs presents a significant challenge in their processing into membranes and subsequent applications. In this study, continuous PAF membranes with adjustable thickness were successfully created using liquid-solid interfacial polymerization. The rigid backbone and the stable C-C coupling endow PAF membrane with superior chemical and dimensional stabilities over most conventional polymer membranes. Different quaternary ammonium functionalities were anchored to the backbone through flexible alkyl chains with tunable length. The optimal PAF membrane exhibited an OH- conductivity of 356.6 mS ⋅ cm-1 at 80 °C and 98 % relative humidity. Additionally, the PAF membrane exhibited outstanding alkaline stability, retaining 95 % of its OH- conductivity after 1000 hours in 1 M NaOH. To the best of our knowledge, this is the first application of PAF materials in anion exchange membranes, achieving the highest OH- conductivity and exceptional chemical/dimensional stability. This work provides the possibility for the potential of PAF materials in anionic conductive membranes.

Optimizing the Electronic Structure of Atomically Dispersed Ru Sites with CoP for Highly Efficient Hydrogen Evolution in both Alkaline and Acidic Media.

Developing efficient and stable electrocatalysts for hydrogen evolution reaction (HER) over a wide pH range and industrial large-scale hydrogen production is critical and challenging. Here, a tailoring strategy is developed to fabricate an outstanding HER catalyst in both acidic and alkaline electrolytes containing high-density atomically dispersed Ru sites anchored in the CoP nanoparticles supported on carbon spheres (NC@RuSA -CoP). The obtained NC@RuSA -CoP catalyst exhibits excellent HER performance with overpotentials of only 15 and 13 mV at 10 mA cm-2 in 1 m KOH and 0.5 m H2 SO4 , respectively. The experimental results and theoretical calculations indicate that the strong interaction between the Ru site and the CoP can effectively optimize the electronic structure of Ru sites to reduce the hydrogen binding energy and the water dissociation energy barrier. The constructed alkaline anion exchange membrane water electrolyze (AAEMWE) demonstrates remarkable durability and an industrial-level current density of 1560 mA cm-2 at 1.8 V. This strategy provides a new perspective on the design of Ru-based electrocatalysts with suitable intermediate adsorption strengths and paves the way for the development of highly active electrocatalysts for industrial-scale hydrogen production.

Pyrrolidinium-Based Hyperbranched Anion Exchange Membranes with Controllable Microphase Separated Morphology for Alkaline Fuel Cells.

It is well acknowledged that the microphase-separated morphology of anion exchange membranes (AEMs) is of vital importance for membrane properties utilized in alkaline fuel cells. Herein, a rigid macromolecule poly(methyldiallylamine) (PMDA) is incorporated to regulate the microphase morphology of hyperbranched AEMs. As expected, the hyperbranched poly(vinylbenzyl chloride) (HB-PVBC) is guided to distribute along PMDA chains, and longer PMDA cha leads to a more distinct microphase morphology with interconnected ionic channels. Consequently, high chloride conductivity of 10.49 mS cm-1 at 30 °C and suppressed water swelling ratio lower than 30% at 80 °C are obtained. Furthermore, the ß-H of pyrrolidinium cations in the non-antiperiplanar position increases the energy barrier of ß-H elimination, leading to conformationally disfavored Hofmann elimination and increased alkaline stability. This strategy is anticipated to provide a feasible way for preparing hyperbranched AEMs with clear microphase morphology and good overall properties for alkaline fuel cells.

Semi-Interpenetrating Network Anion Exchange Membranes by Thiol-Ene Coupling Reaction for Alkaline Fuel Cells and Water Electrolyzers.

In this work, a thiol-ene coupling reaction was employed to prepare the semi-interpenetrating polymer network AEMs. The obtained QP-1/2 membrane exhibits high hydroxide conductivity (162.5 mS cm-1 at 80 °C) with a relatively lower swelling ratio, demonstrating its mechanical strength of 42 MPa. This membrane is noteworthy for its improved alkaline stability, as the semi-interpenetrating network effectively limits the attack of hydroxide. Even after being treated in 2 M NaOH at 80 °C for 600 h, 82.5% of the hydroxide conductivity is maintained. The H2/O2 fuel cell with QP-1/2 membrane displays a peak power density of 521 mW cm-2. Alkaline water electrolyzers based on QP-1/2 membrane demonstrated a current density of 1460 mA cm-2 at a cell voltage of 2.00 V using NiCoFe catalysts in the anode. All the results demonstrate that a semi-interpenetrating structure is a promising way to enhance the mechanical property, ionic conductivity, and alkaline stability of AEMs for the application of alkaline fuel cells and water electrolyzers.

Anion Exchange Membranes for Hydrogen Technologies: Challenges and Progress.

Anion exchange membrane fuel cells (AEMFCs) are considered one of the most promising and efficient hydrogen conversion technologies due to their ability to use cost-effective materials. However, AEMFCs are still in the early stage of development and the lack of suitable anion exchange membranes (AEMs) is one major obstacle. In this review, we highlight three major challenges in AEMs development and discuss recent scientific advancements that address these challenges. We identify current trends and provide a perspective on future development of AEMs.

Unsupervised Learning-Guided Accelerated Discovery of Alkaline Anion Exchange Membranes for Fuel Cells.

Without insight into the correlation between the structure and properties, anion exchange membranes (AEMs) for fuel cells are developed usually using the empirical trial and error method or simulation methods. Here, a virtual module compound enumeration screening (V-MCES) approach, which does not require the establishment of expensive training databases and can search the chemical space containing more than 4.2×105 candidates was proposed. The accuracy of the V-MCES model was considerably improved when the model was combined with supervised learning for the feature selection of molecular descriptors. Techniques from V-MCES, correlating the molecular structures of the AEMs with the predicted chemical stability, generated a ranking list of potential high stability AEMs. Under the guidance of V-MCES, highly stable AEMs were synthesized. With understanding of AEM structure and performance by machine learning, AEM science may enter a new era of unprecedented levels of architectural design.

Alkaline-Stable Anion-Exchange Membranes with Barium [2.2.2]Cryptate Cations: The Importance of High Binding Constants.

The stability of cationic functional groups is one of the key factors determining lifetime of alkaline anion-exchange membranes (AAEMs) and the AAEM-based electrochemical devices. Main-group metal and crown ether complexes are stable cations due to the absence of degradation pathways including nucleophilic substitution, Hofmann elimination, and cation redox. However, the binding strength, a key feature for AAEM applications, is overlooked in previous work. We herein propose the use of barium [2.2.2]cryptate ([Cryp-Ba]2+ ) as a new cationic functional group for AAEMs due to its extremely strong binding (109.5  M-1 in water at 25 °C). The [Cryp-Ba]2+ -AAEMs with polyolefin backbones remain stable after treatment in 15 M KOH at 60 °C for over 1500 hours. More importantly, these AAEMs are successfully applied in water electrolyzers, and an anolyte-feeding switch method is designed to further reveal the influence of binding constants.

A π-Conjugated Anion-Exchange Membrane with an Ordered Ion-Conducting Channel via the McMurray Coupling Reaction.

The McMurry coupling is a facile, gentle and low-cost chemical reaction for synthesizing. Here, for the first time, we employed the McMurry coupling reaction to prepare π-conjugated anion exchange membranes (AEMs). The inter-chain π-π stacking between adjacent benzene rings induces directional self-assembly aggregation and enables highly ordered ion-conductive channels. The resulting structure was characterized through UV/VIS spectrum, X-ray diffraction (XRD) pattern, small-angle X-ray scattering (SAXS), transmission electron microscopy (TEM) and density functional theory (DFT) calculations, leading to high OH- conductivity of 135.5 mS cm-1 at 80 °C. Furthermore, the double bonds in the π-conjugated system also trigger in situ self-crosslinking of the AEMs to enhance dimensional and alkaline stability. Benefiting from this advantage, the as-obtained Cr-QPPV-2.51 AEM exhibits superior alkaline stability (95 % conductivity retention after 3000 hrs in 1 M KOH at 80 °C) and high mechanical strength of 34.8 MPa. Moreover, the fuel cell using Cr-QPPV-2.51 shows a maximum peak power density of 1.27 W cm-2 at 80 °C.

Construction of Integrated Electrodes with Transport Highways for Pure-Water-Fed Anion Exchange Membrane Water Electrolysis.

The design of high-performance and durable electrodes for the oxygen evolution reaction (OER) is crucial for pure-water-fed anion exchange membrane water electrolysis (AEMWE). In this study, an integrated electrode with vertically aligned ionomer-incorporated nickel-iron layered double hydroxide nanosheet arrays, used on one side of the liquid/gas diffusion layer, is fabricated for the OER. Transport highways in the fabricated integrated electrode, significantly improve the transport of liquid/gas, hydroxide ions, and electron in the anode, resulting in a high current density of 1900 mA cm-2 at 1.90 V in pure-water-fed AEMWE. Specifically, three-electrode and single-cell measurement results indicate that an anion-exchange ionomer can increase the local OH- concentration on the integrated electrodes surface and facilitate the OER for pure-water-fed AEMWE. This study highlights a new approach to fabricating and understanding electrode architecture with enhanced performance and durability for pure-water-fed AEMWE.

Ultrathin and Super Strong UHMWPE Supported Composite Anion Exchange Membranes with Outstanding Fuel Cells Performance.

For high-performance anion exchange membrane fuel cells (AEMFCs), the anion exchange membrane (AEMs) should be as thin as possible to reduce the ohmic resistance. However, the mechanical stability of ultrathin AEMs cannot be guaranteed, as well as a huge risk of gas (H2 &O2 ) permeation. In this work, composite AEMs based on ultrahigh molecular weight polyethylene (UHMWPE) are prepared by in situ bulk polymerization. The as-prepared composite membranes can be as thin as 4 µm, and possess super high strength beyond 150 MPa. It also shows extremely low hydrogen permeation, low water uptake, low dimensional swelling, high conductivity, and good alkaline stability. In addition, the fuel cell performance based on the ultrathin composite AEMs exhibits outstanding peak power density of 1014 and 534 mW cm-2 for H2 -O2 and H2 -Air (CO2 -free) at 65 °C, respectively, as well as good short-term durability.

Alkaline Stability of Low Oxophilicity Metallopolymer Anion-Exchange Membranes.

Anion-exchange membrane fuel cells (AEMFCs) are promising energy conversion devices due to their high efficiency. Nonetheless, AEMFC operation time is currently limited by the low chemical stability of their polymeric anion-exchange membranes. In recent years, metallopolymers, where the metal centers assume the ion transport function, have been proposed as a chemically stable alternative. Here we present a systematic study using a polymer backbone with side-chain N-heterocyclic carbene (NHC) ligands complexed to various metals with low oxophilicity, such as copper, zinc, nickel, and gold. The golden metallopolymer, using the metal with the lowest oxophilicity, demonstrates exceptional alkaline stability, far superior to state-of-the-art quaternary ammonium cations, as well as good in situ AEMFC results. These results demonstrate that judiciously designed metallopolymers may be superior to purely organic membranes and provides a scientific base for further developments in the field.

Alkaline Stability Evaluation of Polymerizable Hexyl-Tethered Ammonium Cations.

One of the important challenges in designing robust alkaline anion exchange membranes is the difficulty associated with the chemical stability of covalently bound cationic units. Here, a systematic study exploring alkaline stabilities of polymerizable hexyltrimethylammonium cations is presented, where the hexyl chain is linked to a phenyl ring through a direct carbon-carbon, phenyl ether, or benzyl ether functionality. For this work, small molecule model compounds, styrenic monomer analogs, and their homopolymers are synthesized. Alkaline stabilities of the small molecule cations and their homopolymers are compared to alkaline stability of benzyltrimethylammonium (BTMA) cation and its homopolymer poly(BTMA), respectively. All the hexyl-tethered cations and their homopolymers are significantly more stable under strongly alkaline conditions (2 m KOD at 80 °C). Moreover, ether-linked cations show comparable stability to the direct carbon-carbon linked cation. Via 1 H NMR analyses, possible degradation mechanisms are investigated for each small molecule cation. Findings of this study strongly suggest that the alkaline stability is dictated by the steric hindrance around the ß-hydrogen. This study expands beyond the limits of general knowledge on alkaline stability of alkyl-tethered ammonium cations via the Hofmann elimination route, highlights important design parameters for stable ammonium cations, and demonstrates accessible directly polymerizable alkaline stable ammonium cations.

Ligand Valency Effects on the Alkaline Stability of Metallopolymer Anion-Exchange Membranes.

Long-term stability is a key requirement for anion-exchange membranes (AEMs) for alkaline fuel cells and electrolyzers that is yet to be fulfilled. Different cationic chemistries are being exploited to reach such a goal, and metallopolymers present the unique advantage of chemical stability towards strong nucleophiles as compared to organic cations. Yet, the few metallopolymers tested in strongly alkaline conditions or even in fuel cells still degrade. Therefore, fundamental studies can be advantageous in directing future developments towards this goal. Here, a systematic study of the effect of ligand valency is presented, using nickel-based metallopolymers on polynorbornene backbones, functionalized with multidentate pyridine ligands. Metallopolymers using a single ligand type as well as all the possible mixtures are prepared and their relative stability towards aggressive alkaline conditions compared. Metallopolymer in which nickel ions are hexacoordinated with two tridentate ligands demonstrates superior stability. More importantly, by comparing all the metallopolymers' stability, the reason behind such relative stability provides design parameters for novel metallopolymer AEMs.