Vital root resection with radicular retrograde partial pulpotomy in furcation-involved maxillary molars in patients with periodontitis: Technique description and case series considering clinical and economic aspects.

AIM: Conventional root resection in periodontally compromised furcation-involved maxillary molars requires preceding endodontic treatment and is therefore associated with loss of tooth vitality, higher invasiveness, treatment time and costs, and the risk of endodontic complications. Vital root resection (VRR) could overcome these disadvantages while establishing stable periodontal and endodontic conditions. This case series aimed to introduce the concept of one-stage VRR with radicular retrograde partial pulpotomy (VRRretro). SUMMARY: Seven vital maxillary molars with residual probing pocket depths (PPD) ≥ 6 mm and furcation ≥ class 2 of five patients with stage III/IV periodontitis were treated with VRRretro using mineral trioxide aggregate. Teeth with residual through-and-through furcations were additionally tunnelled. Follow-up up to 2.5 years postoperatively during supportive periodontal care included full periodontal status, percussion and thermal sensitivity testing. Periapical radiographs were obtained to rule out possible periradicular radiolucencies. All seven treated molars were in-situ at an average of 26.84 ± 5.37 months postoperatively and were clinically and radiographically inconspicuous independent of tooth position, the resected root, the need for tunnelling and the restorative status. The mean PPD on the seven treated molars was 4.02 ± 0.85 mm (6-10 mm) preoperatively and 2.62 ± 0.42 mm (3-4 mm) at the last follow-up. Clinical attachment level and bleeding on probing could also be decreased. The teeth showed no mobility over time and furcations class 2 were reduced to class 1 while the tunnelled furcations were accessible with interdental brushes. All molars reacted negatively to percussion and positively to thermal sensitivity testing. KEY LEARNING POINTS: In carefully selected cases considering patient- and tooth-related factors, VRRretro could be a promising treatment option to establish stable periodontal and endodontic conditions in furcation-involved maxillary molars while preserving tooth vitality.

Biological evaluation of novel phosphorylated pullulan-based calcium hydroxide formulations as direct pulp capping materials: An in vivo study on a rat model.

AIM: Calcium hydroxide (CH) has been considered as a direct pulp capping materials (DPC) for the last decades despite having some limitations. Phosphorylate pullulan (PPL) incorporated with CH (CHPPL) is a novel biomaterial that was introduced as a promising DPC material. Thus, the aim of the study was to evaluate the inflammatory response and mineralized tissue formation (MTF) ability of PPL-based CH formulations on rat molars after DPC. METHODOLOGY: This study consisted of six groups: CH with 1% PPL (CHPPL-1); 3% PPL (CHPPL-3); 5% PPL (CHPPL-5); Dycal and NEX MTA Cement (N-MTA) as the positive control, and no capping materials (NC). One hundred twenty maxillary first molar cavities were prepared on Wistar rats. After capping, all the cavities were restored with 4-META/MMA-TBB resin and pulpal responses were evaluated at days 1, 7, and 28. Kruskal-Wallis followed by Mann-Whitney U-test was performed with a significance level of 0.05. Immunohistochemical expression of IL-6, Nestin, and DMP-1 was observed. RESULTS: At day 1, CHPPL-1, N-MTA, and Dycal exhibited no to mild inflammation, whilst CHPPL-3, CHPPL-5, and NC showed mild to moderate inflammation, and the results were significantly different (p < .05). At day 7, mild to moderate inflammation was observed in CHPPL-1, N-MTA, and Dycal, whereas CHPPL-3, CHPPL-5, and NC exhibited moderate to severe inflammation. Significant differences were observed between CHPPL-1 and N-MTA with NC (p < .05), CHPPL-1 and CHPPL-3 with CHPPL-5 and Dycal (p < .05), and CHPPL-3 with N-MTA (p < .05). A thin layer of mineralized tissue formation (MTF) was observed in all groups. At day 28, CHPPL-1, Dycal, and N-MTA showed no to mild inflammation, whilst CHPPL-3, CHPPL-5, and NC exhibited mild to severe inflammation, and statistically significant difference was detected (p < .05). CHPPL-1, Dycal, and N-MTA exhibited continuous MTF, whilst CHPPL-3, CHPPL-5, and NC had thicker and interrupted MTF. Significant differences were observed between CHPPL-1, CHPPL-3, and N-MTA with NC group (p < .05). Variable expressions of IL-6, Nestin, and DMP-1 indicated differences in the materials' impact on odontoblast-like cell formation and tissue mineralization. CONCLUSIONS: These findings suggest that CHPPL-1 has the potential to minimize pulpal inflammation and promote MTF and had similar efficacy as MTA cement.

Assessing the efficacy of Laser pulpotomy versus conventional pulpotomy in primary teeth: A systematic review and meta-analysis of clinical trials.

PURPOSE: This study systematically reviewed the clinical and radiographic outcomes of laser versus conventional pulpotomy in primary teeth. It also compared the success and effectiveness of different lasers to enhance the understanding and use of laser pulpotomy as an alternative treatment. METHODOLOGY: An electronic search was carried out in PubMed and Cochrane from 1st January 1999 to 31st December 2023. The published articles in the English language were searched using MeSH terms and text words. Only randomized controlled trials with a sample size of more than 10 and follow-ups over 6 months were included. Meta-analysis and forest plots were evaluated by utilizing Review Manager 5.4 software. Two reviewers assessed the risk of bias using the RoB 2 tool and discrepancies were resolved by the third reviewer. The success rates were combined using a random effects model to determine clinical and radiographic outcomes. We used risk ratios with 95% confidence intervals (CI) as the primary effect measures and set the significance level at 0.05. RESULTS: Only 18 studies met the inclusion criteria after an electronic search. Among them, 13 studies evaluated the clinical and radiographic outcomes of laser with formocresol pulpotomy, 2 studies compared with ferric sulfate pulpotomy, and the remaining studies with Mineral trioxide aggregate (MTA) pulpotomy. The various studies showed different levels of bias. There was no significant difference in the clinical success rate (p = 0.47; RR: 1.01; 95% CI 0.98-1.04; I2 = 0%; p = 0.70) and radiographic success rate (p = 0.94; RR: 1.00; 95% CI 0.91-1.09; I2 = 64%; p = 0.001) between laser pulpotomy and formocresol. Similarly, there was no significant difference between laser pulpotomy and ferric sulfate or MTA pulpotomy. CONCLUSION: Diode laser and LLLT can be considered as alternative pulpotomy agents to formocresol in primary teeth. However, high-quality trials are needed to confirm the accuracy and reliability of these findings.

Effects of mineral trioxide aggregate and methyl sulfonyl methane on pulp exposure via RUNX2 and RANKL pathways.

The aim of this study was to determine the therapeutic effects of mineral trioxide aggregate (MTA) and methyl sulfonyl methane (MSM) on pulp damage due to pulp exposure through the RUNX2 and RANKL pathways. Seventy-two male Sprague-Dawley rats aged 4-6 months and weighing 250-300 g were divided into healthy, control, MTA, and MSM groups. After experimental applications, all rats at 2, 4, and 8 weeks were killed anesthetically with xylazine hydrochloride (Rompun, Bayer) 30 mg/kg and ketamine hydrochloride (Ketalar, Pfizer) 50 mg/kg injections (i.p.). We observed that necrotic odontoblasts, edema, inflammation, and vascular congestion findings were reduced from week 2 to week 8 in the MSM treatment group after pulp capping compared to the control group and MTA group. Similarly, we found a decrease in RUNX2 and RANKL levels in the MSM application group compared to the control and MTA groups (p < 0.05). MSM material has shown therapeutic effects on pulp capping treatment-induced pulp injury via increased RUNX2 ve RANKL expression.

Finite element evaluation of dentin stress changes following different endodontic surgical approaches.

The aim was to compare the effect of different endodontic surgical treatments on the stress distributions in dentin of a simulated first mandibular molar tooth using the finite element analysis method. Three surgical endodontic procedures (apical resection, root amputation, and hemisection) were simulated in a first mandibular molar. Biodentine or mineral-trioxide-aggregate was used to repair the surgery site in apical resection and root amputation models; the remaining root canal spaces were filled with gutta-percha. Access cavities were restored using resin composite. In hemisection model, root canal was filled with gutta-percha, and coronal restoration was finished with a monolithic zirconia crown. A sound tooth model was created as a control model. An oblique force of 300 N angled at 45° to the occlusal plane was simulated. Maximum von Mises stresses were evaluated in dentin near the surgery regions and the entire tooth. Apical resection/Biodentine and apical resection/mineral-trioxide-aggregate models generated maximum von Mises stresses of 39.001 MPa and 39.106 MPa, respectively. The recorded maximum von Mises stresses in root amputation models were 66.491 MPa for root amputation/Biodentine and 73.063 MPa for root amputation/mineral-trioxide-aggregate models. The highest maximum von Mises stress value among all models was observed in the hemisection model, measuring 138.87 MPa. Hemisection induced the highest von Mises stresses in dentin, followed by root amputation and apical resection. In apical resection, Biodentine and mineral-trioxide-aggregate did not show a significant difference in stress distribution. Biodentine in root amputation may lead to lower stresses compared to mineral-trioxide-aggregate.

Partial pulpotomy success in primary molars followed up for 24 months: A randomized controlled clinical trial using mineral trioxide aggregate, biodentine, and acemannan.

BACKGROUND: Finding the best treatment approach and suitable capping materials in primary molars with deep carious lesions remains unresolved. AIM: To compare the success rates of partial pulpotomy in deep caries lesions in primary molars treated with mineral trioxide aggregate (MTA), biodentine, or acemannan for 6-24 months. DESIGN: A parallel-design, non-inferiority randomized controlled clinical trial was performed. Ninety mandibular primary molars from 65 children meeting the criteria, aged 3-8 years, were included. After inflamed pulp tissue removal and hemostasis, each tooth was randomly allocated into the MTA control group, or the biodentine or acemannan experimental group (N = 30 per group). All teeth were restored with a stainless steel crown. The outcomes were evaluated for 6-24 months. A generalized estimating equation model was used to compare the overall success rate in each group. RESULTS: After 24 months, 58 children (83 teeth) were available for evaluation. The results indicated that the success rate in the MTA, biodentine, and acemannan groups was 83.3%, 76.9%, and 74.1%, respectively. No significant difference in success rates among groups, however, was observed at the 6- to 24-month follow-ups (at 24th month, p = .30). CONCLUSION: There was no statistically significant difference between MTA, biodentine, or acemannan in the partial pulpotomy success after 24 months.

Evaluation of various obturation techniques with bioceramic sealers in 3D-printed C-shaped canals.

This in vitro study compared various obturation techniques with bioceramic sealers for filling C-shaped 3D-printed replicas. A mandibular molar with a C-shaped root canal with a C1 configuration was obtained. After instrumenting with M3 Pro Gold files (United Dental, Shanghai, China) up to size #30/0.04, a CBCT scan of the tooth was taken. Sixty 3D-printed replicas of the tooth were created. The samples were obturated with EndoSeal TCS sealer (E. TCS; Maruchi, Wonju, Korea) or EndoSeal MTA (E. MTA; Maruchi, Wonju, Korea) (n = 30). The samples in each group were obturated with the following techniques (n = 10): (1) single-cone technique (SC), (2) SC with ultrasonic activation (UA), and (3) cold hydraulic compaction (CHC). Following incubation, the replicas' apical, middle, and coronal thirds were inspected under a digital microscope, and the proportion of filling material and void were calculated. Also, the obturation time and sealer extrusion were recorded. Data were analyzed using ANOVA, LSD post-hoc, and the chi-square tests (α = 0.05). The results indicated that in the apical third, E. TCS-SC, E. TCS-UA, and E. MTA-UA had the lowest void percentage among groups (p < 0.05). In the middle thirds, samples obturated with E. TCS-UA showed a significantly lower void percentage among all groups (p < 0.05). However, in the coronal third, E. TCS-CHC showed the least void percentage (p < 0.05), followed by E. TCS-UA and E. MTA-CHC. The E. TCS-SC and E. TCS-UA were the least time-consuming methods (p < 0.05). Sealer extrusion significantly differed among the groups, with E. MTA-UA and E. TCS-UA showing higher incidence (p = 0.019). It was concluded that E. TCS-UA was the most convenient obturation technique. However, care must be taken when obturating the canals with high flow and ultrasonic activation near the vital anatomical landmarks.

The effect of three additives on properties of mineral trioxide aggregate cements: a systematic review and meta-analysis of in vitro studies.

BACKGROUND: Several efforts have been made to improve mechanical and biological properties of calcium silicate-based cements through changes in chemical composition of the materials. This study aimed to investigate the physical (including setting time and compressive strength) and chemical (including calcium ion release, pH level) properties as well as changes in cytotoxicity of mineral trioxide aggregate (MTA) after the addition of 3 substances including CaCl2, Na2HPO4, and propylene glycol (PG). METHODS: The systematic review was conducted in accordance with Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA). Electronic searches were performed on PubMed, Embase, and Scopus databases, spanning from 1993 to October 2023 in addition to manual searches. Relevant laboratory studies were included. The quality of the included studies was assessed using modified ARRIVE criteria. Meta-analyses were performed by RevMan statistical software. RESULTS: From the total of 267 studies, 24 articles were included in this review. The results of the meta-analysis indicated that addition of PG increased final setting time and Ca2+ ion release. Addition of Na2HPO4 did not change pH and cytotoxicity but reduced the final setting time. Incorporation of 5% CaCl2 reduced the setting time but did not alter the cytotoxicity of the cement. However, addition of 10% CaCl2 reduced cell viability, setting time, and compressive strength. CONCLUSION: Inclusion of 2.5% wt. Na2HPO4 and 5% CaCl2 in MTA can be advisable for enhancing the physical, chemical, and cytotoxic characteristics of the admixture. Conversely, caution is advised against incorporating elevated concentrations of PG due to its retarding effect. TRIAL REGISTRATION: PROSPERO registration number: CRD42021253707.

Comparative analysis of shear bond strength of MTA and Theracal PT with different restorative materials.

BACKGROUND: This study aimed to compare the in vitro shear bond strength (SBS) of mineral trioxide aggregate (MTA) and dual-cured, resin-modified calcium silicate material (Theracal PT) to composite resin, compomer, and bulk-fill composite, and to evaluate the bond failure mode under a stereomicroscope. METHODS: Ninety acrylic specimens, each with a 4 mm diameter and 2 mm height central hole, were prepared. These specimens were randomly divided into two groups based on the capping materials: MTA and Theracal PT. Each group was further subdivided into three subgroups (n = 15) according to the restorative materials: composite resin, compomer, and bulk-fill composite. The specimens were then subjected to shear testing using a universal testing machine at a crosshead speed of 1 mm/min. Post-test, the fracture locations were examined using a stereomicroscope. Data were analyzed using a two-way analysis of variance (ANOVA) and the Tukey test. RESULTS: The SBS values for the Theracal PT group were significantly higher than those for the MTA group (p < 0.001). Within the MTA groups, no significant differences were observed in SBS values across the different restorative materials. However, a significant difference was found between the mean SBS values of the Theracal PT + composite resin group and the Theracal PT + compomer group (p < 0.001). CONCLUSIONS: Theracal PT shows promise in dentistry due to its superior bond strength. Given its bond values, Theracal PT appears capable of forming durable and long-lasting restorations by establishing reliable bonds with various restorative materials commonly used in dentistry.

The effects of mineral trioxide aggregate and second-generation autologous growth factor on pulpotomy via TNF-α and NF-kß/p65 pathways.

This study aims to investigate the effect of Mineral Trioxide Aggregate (MTA), a bioactive endodontic cement, and Concentrated Growth Factor (CGF), a second-generation autologous growth factor, on pulpotomy-induced pulp inflammation. The study utilized the maxillary anterior central teeth of thirty-six young male Sprague Dawley rats. Forty-eight teeth were randomly assigned to two groups (12 rats/group; 24 teeth/group) based on the capping material (MTA or CGF). Subsequently, two subgroups (MTAG and CGFG) were formed per group (12 teeth/group) based on the time following pulpotomy (2-weeks and 4-weeks). The central teeth of the 12 animals assigned to the control group (CG) were not manipulated in any way, both in the 2-week group and in the 4-week group. Tissue samples extracted from rats at the end of the experiment were stained with H&E for histopathological analysis. For immunohistochemical analysis, primary antibodies for TNF-α and NF-kß/65 were incubated. Data obtained from semi-quantitative analysis were assessed for normal distribution using Skewness-Kurtosis values, Q-Q plot, Levene's test, and the Shapiro-Wilk test on statistical software. A P value < 0.05 was considered significant. When compared with the control group, both MTAG and CGFG showed increased edematous and inflammatory areas. In MTAG, edematous and inflammatory areas decreased significantly from the 2nd week (2(2-2), 2(1-2)) to the 4th week (1(1-1), 1(0-1)), while in CGFG, edematous areas decreased (2(2-3), 1.5(1-2)), and inflammatory areas increased significantly (2(2-3), 3(2-2.5)). When compared with the control group, TNF-α and NF-kß/p65 positivity were higher in both MTAG and CGFG. In MTAG, TNF-α [2(1.5-2)] and NF-kß/p65 [1.5(1-2)] positivity decreased significantly from the 2nd week to the 4th week [TNF-α: 1(1-1), NF-kß/p65: 1(1-2)], while no significant change was observed in CGFG. In conclusion, this study revealed a reduction in cells showing TNF-α and NF-kß/p65 positivity in the MTA treatment group compared to the CGF group. Although MTA demonstrated more favorable results than CGF in mitigating pulpal inflammation within the scope of this study, further experimental and clinical investigations are warranted to obtain comprehensive data regarding CGF.

Hard tissue formation in pulpotomized primary teeth in dogs with nanomaterials MCM-48 and MCM-48/hydroxyapatite: an in vivo animal study.

BACKGROUND: This animal study sought to evaluate two novel nanomaterials for pulpotomy of primary teeth and assess the short-term pulpal response and hard tissue formation in dogs. The results were compared with mineral trioxide aggregate (MTA). METHODS: This in vivo animal study on dogs evaluated 48 primary premolar teeth of 4 mongrel female dogs the age of 6-8 weeks, randomly divided into four groups (n = 12). The teeth underwent complete pulpotomy under general anesthesia. The pulp tissue was capped with MCM-48, MCM-48/Hydroxyapatite (HA), MTA (positive control), and gutta-percha (negative control), and the teeth were restored with intermediate restorative material (IRM) paste and amalgam. After 4-6 weeks, the teeth were extracted and histologically analyzed to assess the pulpal response to the pulpotomy agent. RESULTS: The data were analyzed using the Kruskal‒Wallis, Fisher's exact, Spearman's, and Mann‒Whitney tests. The four groups were not significantly different regarding the severity of inflammation (P = 0.53), extent of inflammation (P = 0.72), necrosis (P = 0.361), severity of edema (P = 0.52), extent of edema (P = 0.06), or connective tissue formation (P = 0.064). A significant correlation was noted between the severity and extent of inflammation (r = 0.954, P < 0.001). The four groups were significantly different regarding the frequency of bone formation (P = 0.012), extent of connective tissue formation (P = 0.047), severity of congestion (P = 0.02), and extent of congestion (P = 0.01). No bone formation was noted in the gutta-percha group. The type of newly formed bone was not significantly different among the three experimental groups (P = 0.320). CONCLUSION: MCM-48 and MCM-48/HA are bioactive nanomaterials that may serve as alternatives for pulpotomy of primary teeth due to their ability to induce hard tissue formation. The MCM-48 and MCM-48/HA mesoporous silica nanomaterials have the potential to induce osteogenesis and tertiary (reparative) dentin formation.

Nonsurgical management of large periapical lesions: case reports and review of the literature.

The objectives of this article are to report 2 cases of nonsurgical endodontic treatment for the management of periapical lesions associated with large cortical bone perforations and review the literature on the clinical efficacy of nonsurgical endodontic treatment to draw insights from published case reports. Large, cyst-like periapical lesions in 2 patients were successfully treated with combined modalities of root canal treatment, antimicrobial therapy (calcium hydroxide and triple antibiotic paste [TAP]), and mineral trioxide aggregate (MTA) obturation of the canal space. In both cases, instrumentation was extended 1 mm beyond the apical foramen to facilitate drainage through the root canal, because it was assumed that the periapical lesion could be cystic. After instrumentation, TAP was placed within the canal space to aid in disinfection and healing of the dental, pulpal, and periapical conditions. In both patients, the teeth were asymptomatic and functional at follow-up examinations (case 1, 3 years; case 2, 30 months). Supporting the positive outcomes in the 2 clinical cases, the published literature suggests that the use of biocompatible materials such as MTA, which can promote the deposition of hydroxyapatite, has the potential to contribute to tissue regeneration and the healing of large periapical lesions.

Comparative Evaluation of Push-out Bond Strength of Conventional Mineral Trioxide Aggregate, Biodentine, and Two Novel Antibacterial-enhanced Mineral Trioxide Aggregates.

AIM: To evaluate the push-out bond strength of two newly modified mineral trioxide aggregates (MTAs) with conventional MTA and biodentine. MATERIALS AND METHODS: Material preparation: Two commercially available bioactive bioceramics: Group I: Mineral trioxide aggregate; Group II: Biodentine; and two newly formulated modified MTAs: Group III: Doxycycline incorporated MTA formulation; Group IV: Metronidazole incorporated MTA formulation was used in the present study. All the test materials were then carried using a plastic instrument to the desired experimental design. Teeth sample preparation: A total of 120 teeth samples were collected and divided into four groups of test materials with 30 teeth samples per group. Single-rooted permanent teeth, that is, incisors were collected and stored in saline until the study was performed. Sectioning of the teeth into 2.0 ± 0.05-mm thick slices was performed perpendicular to the long axis of the tooth. The canal space was instrumented using Gates Glidden burs to achieve a diameter of 1.5 mm. All four prepared materials were mixed and placed in the lumen of the slices and placed in an incubator at 37°C for 72 hours. Push-out test and bond failure pattern evaluation: The push-out test was performed using a universal testing machine. The slices were examined under a scanning electron microscope (SEM) at 40× magnification to determine the nature of bond failure. All the collected data were recorded and statistically analyzed. RESULTS: The mean push-out bond strength was found to be the highest for group II (37.38 ± 1.94 MPa) followed by group III (28.04 ± 2.22 MPa) and group IV (27.83 ± 1.34 MPa). The lowest mean push-out bond strength was noticed with group I (22.89 ± 2.49 MPa). This difference was found to be statistically significant (p = 0.000). Group I samples had the predominantly adhesive type of failure (86.4%), while group II samples showed the cohesive type of failure (94.2%). Both the modified MTAs (groups III and IV) primarily showed mixed types of failures. CONCLUSION: Both the antibacterial-enhanced MTAs had better pushout bond strength compared to conventional MTA but did not outperform biodentine. Hence, it could serve as a substitute for conventional MTA due to its augmented physical properties. CLINICAL SIGNIFICANCE: Carious pulp exposure and nonvital open apices pose a critical challenge to pediatric dental practitioners. In such circumstances, maintaining the vitality of pulp and faster healing would help in a better prognosis. Novel MTAs without any cytotoxic components, and enhanced antibacterial contents with augmented physical properties can help in treating such clinical conditions. How to cite this article: Merlin ARS, Ravindran V, Jeevanandan G, et al. Comparative Evaluation of Push-out Bond Strength of Conventional Mineral Trioxide Aggregate, Biodentine, and Two Novel Antibacterial-enhanced Mineral Trioxide Aggregates. J Contemp Dent Pract 2024;25(2):168-173.

Comparative Evaluation of Effectiveness of Calcium Hydroxide, MTA, and TheraCal LC in Indirect Pulp Capping in Primary Molars: In Vivo Study.

AIM: This investigation aimed to observe the effects of Dycal, mineral trioxide aggregate (MTA), and TheraCal LC, as indirect pulp-capping materials in primary molars. MATERIALS AND METHODS: About 75 children with lower primary molars aged between 4 and 7 years suggested for IPC were selected and randomly allocated into: Group I - Dycal, group II - MTA, and group III - TheraCal LC. An immediate postoperative radiograph was taken after the procedure. Recall examination was done after 3 and 6 months for clinical and radiographic assessment. The radiographs were digitized, and the amount of thickness of dentin was assessed using Corel Draw software. The values were tabulated and subjected to paired t-tests and independent t-tests for intra and intergroup analysis, respectively. The p-value < 0.05 was considered statistically significant. RESULTS: There was a statistically significant increase in dentin thickness in the first 3 months compared to the 6-month follow-up. At the end of the research phase, TheraCal LC had more tertiary dentin deposited than MTA, followed by Dycal. CONCLUSION: TheraCal LC can be a reliable indirect pulp-capping agent in primary teeth. CLINICAL SIGNIFICANCE: Indirect pulp capping (IPC) is a very extensively employed treatment regimen to manage extensive caries. For many decades, calcium hydroxide has been regarded as the benchmark of pulp capping materials. With several advancements in materials for restoration, TheraCal LC a resin-modified, light-cured calcium silicate-filled liner serves as a pulp-capping agent and dentin protector, promoting pulp healing and preserving vitality as an obstacle cum protector of the dental pulp complex. How to cite this article: Thomas NA, Jobe J, Thimmaiah C, et al. Comparative Evaluation of Effectiveness of Calcium Hydroxide, MTA, and TheraCal LC in Indirect Pulp Capping in Primary Molars: In Vivo Study. J Contemp Dent Pract 2024;25(4):365-371.

Biodentine as a pulpotomy medicament for primary molars: a retrospective chart review.

This retrospective chart review study investigates the long-term clinical outcome of Biodentine® (Tricalcium silicate) as a medicament for pulpotomy in primary molars. Data in this retrospective study was collected from the dental records of all patients that had at least one primary molar receive pulpotomy treatment (CDT code: D3221) between 01 July 2012 and 01 July 2015. This data includes child's age, medical history, dental history, dental radiographs, pulpotomy procedure details and follow-up clinical notes. Kaplan-Meier Estimate was used to measure the fraction of successful pulpotomy procedures for up to 24 months. A total of 1758 pulpotomy procedures were performed on 1032 patients in our institute in the three-year period and 21.4% of them (N = 376) had follow-up dental records that qualified for the study. Eleven teeth out of 376 teeth were excluded from the statistical analysis due to loss of/broken stainless steel crowns (3.1%). Seventeen pulpotomy failures were identified out of the remaining 365 procedures. The survival probablity of using Biodentine® as a pulpotomy medicament is 96.3% for 18-month follow-up and 95.4% for 24-month follow-up. Biodentine®, a tricalcium silicate formulation, used as a pulpotomy medicament demonstrates a high clinical success rate (95.4%) over a 24-month peroid in primary molars.

Postoperative pain of single-visit endodontic treatment with gutta-percha versus MTA filling: a randomized superiority trial.

BACKGROUND: Postoperative pain has remained a challenge for clinicians. This randomized superiority trial compared the levels of postoperative pain following the use of gutta-percha (GP) and sealer or mineral trioxide aggregate (MTA) as root canal filling materials in teeth with asymptomatic apical periodontitis. METHODS: A total of 119 patients were initially evaluated in this two-arm, parallel-group, single-blind, superiority randomized trial. The inclusion criteria were participants aged 18-65 years with single-canal premolars diagnosed with asymptomatic apical periodontitis. The participants were finally divided into two groups using the permuted block randomization method. In the GP group (N = 46), the cleaned and shaped root canals were filled with gutta-percha and AH Plus sealer, while in the MTA group (N = 48), the cleaned and shaped root canals were filled with an MTA apical filling and a coronal gutta-percha and sealer. Patient pain level was measured 6, 12, 24, 48, and 72 h postoperatively using a 10-point visual analog scale (VAS). The data were analyzed by the chi-square, independent t, Friedman, and Mann-Whitney U tests. RESULTS: The mean of VAS scores decreased significantly over time in both groups (P < 0.001). The mean VAS scores were significantly lower in the MTA filling group than in the other group (P < 0.05). Female patients reported higher VAS scores at 6- and 12-hour periods in both groups (P < 0.05). CONCLUSION: MTA as a root canal filling material might be a valuable option for clinicians due to its low postoperative pain. TRIAL REGISTRATION: The trial protocol was registered at the Registry of Clinical Trials (IRCT20191104045331N1).

Evaluation of Cytotoxicity of Calcium Silicate-based Mineral Trioxide Aggregate Sealers: A Systematic Review of In Vitro Studies.

AIM: This review aimed to evaluate the in vitro studies done with regard to the cytotoxicity associated with mineral trioxide aggregate (MTA)-based root canal sealers. BACKGROUND: Root canal sealers are used during endodontic treatment as fillers to seal the gaps between the canal gutta-percha cone and canal walls. It is necessary to understand the cytotoxicity of these materials on human-derived cells as these materials interact with human cells periapically. REVIEW RESULTS: Six in vitro studies were chosen for review. In these selected studies, along with MTA-based root canal sealers, other sealers were tested for cytotoxicity on human periodontal ligament (PDL) stem cells, human PDL fibroblasts, and human osteoblast cells. Regarding cytotoxicity, the studies were diverse, and most were based on 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyl-2H-tetrazolium bromide) (MTT) assay. In general, the studies suggested that root canal sealers cause mild to severe cytotoxic effects and that several factors influence this effect, such as material setting time, concentration, and duration of exposure. CONCLUSION: All studies in the review indicated that MTA. Fillapex must be used cautiously as it exhibited the highest cytotoxic effect compared to other MTA-based and non-MTA-based sealers. CLINICAL SIGNIFICANCE: Endodontic sealers do serve the purpose of bridging the gaps between the gutta-percha cone and the canal wall but knowing its biocompatibility becomes important as the material is extruded beyond the apical foramen where it comes in contact with the surrounding tissues. The effect of sealers on the surrounding tissues affects the healing and prognosis of the treatment.

Apexogenesis of an Immature Permanent Molar with Irreversible Pulpitis Using Mineral Trioxide Aggregate Pulpotomy: A Case Report.

Carious exposure of an irreversibly inflamed vital pulp in a young permanent tooth presents a significant clinical challenge to clinicians to maintain the vitality. Direct pulp capping, partial pulpotomy, and complete pulpotomy are the available procedures to treat young permanent tooth. Mineral trioxide aggregate and biodentine are currently the material of choice for these procedures. The present case report describes the successful apexogenesis of mandibular left first permanent molar using mineral trioxide aggregate. The 18-month follow-up of the case demonstrated clinical and radiographic success with absence of any signs and symptoms and continued root formation.

Cell Biological and Antibacterial Evaluation of a New Approach to Zirconia Implant Surfaces Modified with MTA.

Peri-implantitis continues to be one of the major reasons for implant failure. We propose a new approach to the incorporation of MTA into zirconia implant surfaces with Nd:YAG laser and investigate the biological and the microbiological responses of peri-implant cells. Discs of zirconia stabilized with yttria and titanium were produced according to the following four study groups: Nd:YAG laser-textured zirconia coated with MTA (Zr MTA), Nd:YAG laser-textured zirconia (Zr textured), polished zirconia discs, and polished titanium discs (Zr and Ti). Surface roughness was evaluated by contact profilometry. Human osteoblasts (hFOB), gingival fibroblasts (HGF hTERT) and S. oralis were cultured on discs. Cell adhesion and morphology, cell differentiation markers and bacterial growth were evaluated. Zr textured roughness was significantly higher than all other groups. SEM images reveal cellular adhesion at 1 day in all samples in both cell lines. Osteoblasts viability was lower in the Zr MTA group, unlike fibroblasts viability, which was shown to be higher in the Zr MTA group compared with the Zr textured group at 3 and 7 days. Osteocalcin and IL-8 secretion by osteoblasts were higher in Zr MTA. The Zr textured group showed higher IL-8 values released by fibroblasts. No differences in S. oralis CFUs were observed between groups. The present study suggests that zirconia implant surfaces coated with MTA induced fibroblast proliferation and osteoblast differentiation; however, they did not present antibacterial properties.

The Successful Interdisciplinary Outcome of Blunderbuss Canal with an Open Apex Using MTA under Magnification: A Case Report.

Aim and objective: The present case report aims to describe the nonsurgical management of an anterior tooth with a blunderbuss canal and an open apex using mineral trioxide aggregate (MTA) under magnification. Background: When pulp is traumatized before root formation, it results in pulpal necrosis, due to which dentin and root formation are interrupted. As a result, the canal remains broad due to thin and fragile dentin walls leading to the open apex. Therefore, root canal treatment is a big challenge currently. In such cases, we prefer MTA apexification to form the hard tissue apical barrier, which is a foreseeable treatment and has been used as another advanced method than calcium hydroxide (CaOH2) apexification due to its superior properties. Case description: A novel apexification technique was used by the Departments of Pediatric Dentistry and Conservative Dentistry and Endodontics for MTA placement in the central incisor with respect to 11 of a 9-year-old female patient. MTA was used to form an apical barrier using the micro-apical placement (MAP) system under a dental operating microscope (DOM). Following MTA hard set confirmation, obturation with bioceramic sealer and gutta percha with warm vertical condensation was done, followed by post-endodontic composite restoration. Conclusion: This case describes the nonsurgical management of an open apex using MTA, MAP system, magnification, and bioceramics, which aided in the management of this endodontic enigma. How to cite this article: Bhasin P, Saraf BG, Chauhan S, et al. The Successful Interdisciplinary Outcome of Blunderbuss Canal with an Open Apex Using MTA under Magnification: A Case Report. Int J Clin Pediatr Dent 2024;17(1):97-101.