Compact Model and Detailed Balance Limit for a Dual n-Type Direct Z-Scheme Heterojunction.

This paper presents a comprehensive study on a compact model and the detailed balance limit for a dual n-type direct Z-scheme heterojunction. The compact model developed in this work describes the current-voltage (IV) characteristics of the staggered heterojunction under one-sided illumination. The model incorporates charge neutrality, surface recombination, thermionic emission over the barrier, and surface potentials. By considering these factors, the IV curve of the staggered heterojunction is captured, shedding light on the charge transfer and separation processes within the device. The heterojunction device consists of two photosystems: photosystem one (PSI) with a wide band gap and photosystem two (PSII) with a narrow band gap. Furthermore, the paper establishes the detailed balance limit for the efficiency of the dual n-type direct Z-scheme heterojunction. The maximum achievable efficiency, estimated to be 11.4%, is determined by the interplay between the band gap of PSII and the empirical relation for the maximum barrier for electrons leaving PSII. This detailed balance limit represents the highest efficiency that can be attained, accounting for carrier generation, recombination, and charge transfer mechanisms. The compact model and the derived detailed balance limit provide insights for designing and improving the performance of direct Z-scheme heterojunctions.

P-N Heterojunction Embedded CuS/TiO2 Bifunctional Photocatalyst for Synchronous Hydrogen Production and Benzylamine Conversion.

The coupling of photocatalytic hydrogen production and selective oxidation of benzylamine is a topic of significant research interest. However, enhancing the bifunctional photocatalytic activity in this context is still a major challenge. The construction of Z-scheme heterojunctions is an effective strategy to enhance the activity of bifunctional photocatalysts. Herein, a p-n type direct Z-scheme heterojunction CuS/TiO2 is constructed using metal-organic framework (MOF)-derived TiO2 as a substrate. The carrier density is measured by Mott-Schottky under photoexcitation, which confirms that the Z-scheme electron transfer mode of CuS/TiO2 is driven by the diffusion effect caused by the carrier concentration difference. Benefiting from efficient charge separation and transfer, photogenerated electrons, and holes are directedly transferred to active oxidation and reduction sites. CuS/TiO2 also exhibits excellent bifunctional photocatalytic activity without noble metal cocatalysts. Among them, the H2 evolution activity of the CuS/TiO2 is found to be 17.1 and 29.5 times higher than that of TiO2 and CuS, respectively. Additionally, the yields of N-Benzylidenebenzylamine (NBB) are 14.3 and 47.4 times higher than those of TiO2 and CuS, respectively.

Tunable Band Engineering Management on Perovskite MAPbBr3 /COFs Nano-Heterostructures for Efficient S-S Coupling Reactions.

Efficient artificial photosynthesis of disulfide bonds holds promises to facilitate reverse decoding of genetic codes and deciphering the secrets of protein multilevel folding, as well as the development of life science and advanced functional materials. However, the incumbent synthesis strategies encounter separation challenges arising from leaving groups in the ─S─S─ coupling reaction. In this study, according to the reaction mechanism of free-radical-triggered ─S─S─ coupling, light-driven heterojunction functional photocatalysts are tailored and constructed, enabling them to efficiently generate free radicals and trigger the coupling reaction. Specifically, perovskites and covalent organic frameworks (COFs) are screened out as target materials due to their superior light-harvesting and photoelectronic properties, as well as flexible and tunable band structure. The in situ assembled Z-scheme heterojunction MAPB-M-COF (MAPbBr3 = MAPB, MA+ = CH3 NH2 + ) demonstrates a perfect trade-off between quantum efficiency and redox chemical potential via band engineering management. The MAPB-M-COF achieves a 100% ─S─S─ coupling yield with a record photoquantum efficiency of 11.50% and outstanding cycling stability, rivaling all the incumbent similar reaction systems. It highlights the effectiveness and superiority of application-oriented band engineering management in designing efficient multifunctional photocatalysts. This study demonstrates a concept-to-proof research methodology for the development of various integrated heterojunction semiconductors for light-driven chemical reaction and energy conversion.

Direct Z-Scheme Heterostructure of Vertically Oriented SnS2 Nanosheet on BiVO4 Nanoflower for Self-Powered Photodetectors and Water Splitting.

The construction of nanostructured Z-scheme heterostructure is a powerful strategy for realizing high-performance photoelectrochemical (PEC) devices such as self-powered photodetectors and water splitting. Considering the band structure and internal electric field direction, BiVO4 is a promising candidate to construct SnS2 -based heterostructure. Herein, the direct Z-scheme heterostructure of vertically oriented SnS2 nanosheet on BiVO4 nanoflower is rationally fabricated for efficient self-powered PEC photodetectors. The Z-scheme heterostructure is identified by ultraviolet photoelectron spectroscopy, photoluminescence spectroscopy, PEC measurement, and water splitting. The SnS2 /BiVO4 heterostructure shows a superior photodetection performance such as excellent photoresponsivity (10.43 mA W-1 ), fast response time (6 ms), and long-term stability. Additionally, by virtue of efficient Z-scheme charge transfer and unique light-trapping nanostructure, the SnS2 /BiVO4 heterostructure also displays a remarkable photocatalytic hydrogen production rate of 54.3 µmol cm-2 h-1 in Na2 SO3 electrolyte. Furthermore, the synergistic effect between photo-activation and bias voltage further improves the PEC hydrogen production rate of 360 µmol cm-2 h-1 at 0.8 V, which is an order of magnitude above the BiVO4 . The results provide useful inspiration for designing direct Z-scheme heterostructures with special nanostructured morphology to signally promote the performance of PEC devices.

Exploring a Ni-N4 Active Site-Based Conjugated Microporous Polymer Z-Scheme Heterojunction Through Covalent Bonding for Visible Light-Driven Photocatalytic CO2 Conversion in Pure Water.

Designing photocatalysts with efficient charge transport and abundant active sites for photocatalytic CO2 reduction in pure water is considered a potential approach. Herein, a nickel-phthalocyanine containing Ni-N4 active sites-based conjugated microporous polymer (NiPc-CMP), offering highly dispersed metal active sites, satisfactory CO2 adsorption capability, and excellent light harvesting properties, is engineered as a photocatalyst. By virtue of the covalently bonded bridge, an atomic-scale interface between the NiPc-CMP/Bi2 WO6 Z-scheme heterojunction with strong chemical interactions is obtained. The interface creates directional charge transport highways and retains a high redox potential, thereby enhancing the photoexcited charge carrier separation and photocatalytic efficiency. Consequently, the optimal NiPc-CMP/Bi2 WO6 (NCB-3) achieves efficient photocatalytic CO2 reduction performance in pure water under visible-light irradiation without any sacrificial agent or photosensitizer, affording a CO generation rate of 325.9 µmol g-1 with CO selectivity of 93% in 8 h, outperforming those of Bi2 WO6 and NiPc-CMP, individually. Experimental and theoretical calculations reveal the promotion of interfacial photoinduced electron separation and the role of Ni-N4 active sites in photocatalytic reactions. This study presents a high-performance CMP-based Z-scheme heterojunction with an effective interfacial charge-transfer route and rich metal active sites for photocatalytic CO2 conversion.

Heterogeneous CuS QDs/BiVO4@Y2O2S Nanoreactor for Monitorable Photocatalysis.

Exploration of multifunctional integrated catalysts is of great significance for photocatalysis toward practical application. Herein, a 1D confined nanoreactor with a heterogeneous core-shell structure is designed for synergies of efficient catalysis and temperature monitoring by custom encapsulation of Z-scheme heterojunction CuS quantum dots/BiVO4 (CuS QDs/BiVO4) and Y2O2S-Er, Yb. The dispersed active sites created by the QDs with high surface energy improve the mass transfer efficiency, and the efficient electron transport channels at the heterogeneous interface extend the carrier lifetime, which endows the nanoreactor with excellent catalytic performance. Meanwhile, real-time temperature monitoring is realized based on the thermally coupled levels 2H11/2/4S3/2→4I15/2 of Er3+ using fluorescence intensity ratio, which enables the monitorable photocatalysis. Furthermore, the nanoreactor with a multidimensional structure increases effective intermolecular collisions to facilitate the catalytic process by restricting the reaction within distinct enclosed spaces and circumvents potential unknown interaction effects. The design of multi-space nanoconfined reactors opens up a new avenue to modulate catalyst function, providing a unique perspective for photocatalytic applications in the mineralization of organic pollutants, hydrogen production, and nitrogen fixation.

The Z-Scheme MIL-88B(Fe)/BiOBr Heterojunction Promotes Fe(III)/Fe(II) Cycling and Photocatalytic-Fenton-Like Synergistically Enhances the Degradation of Ciprofloxacin.

The Z-scheme MIL-88B/BiOBr (referred to as MxBy, whereas x and y are the mass of MIL-88B(Fe) and BiOBr) heterojunction photocatalysts are successfully prepared by a facile ball milling method. By adding low concentration H2O2 under visible light irradiation, the Z-scheme heterojunction and photocatalytic-Fenton-like reaction synergistically enhance the degradation and mineralization of ciprofloxacin (CIP). Among them, M50B150 showed efficient photodegradation efficiency and excellent cycling stability, with 94.6% removal of CIP (10 mg L-1) by M50B150 (0.2 g L-1) under 90 min of visible light. In the MxBy heterojunctions, the rapid transfer of photo-generated electrons not only directly decomposed H2O2 to generate ·OH, but also improved the cycle of Fe3+/Fe2+ pairs, which facilitated the reaction with H2O2 to generate ·OH and ·O2 - radicals. In addition, the effects of photocatalyst dosages, pH of CIP solution, and coexisting substances on CIP removal are systematically investigated. It is found that the photocatalytic- Fenton-like reaction can be carried out at a pH close to neutral conditions. Finally, the charge transfer mechanism of the Z-scheme is verified by electron spin resonance (ESR) signals. The ecotoxicity of CIP degradation products is estimated by the T.E.S.T tool, indicating that the constructed photocatalysis-Fenton-like system is a green wastewater treatment technology.

Nanoarchitectonics toward Full Coverage of CdZnS Nanospheres by Layered Double Hydroxides for Enhanced Visible-Light-Driven H2 Evolution.

Nanoarchitectonics of semiconductors shed light on efficient photocatalytic hydrogen evolution by precisely controlling the surface microenvironment of cocatalysts. Taking cadmium zinc sulfide (CZS) nanoparticles as a target, the spontaneous modifications are conducted by interactions between surface Cd2+/Zn2+ atoms and thiol groups in thioglycolic acid. The capping ligand impacts the semiconductor surface with a negative electronic environment, contributing to the full coverage of CZS by nickel-cobalt hydroxides (NiCo-LDHs) cocatalysts. The obtained core-shell CZS@NiCo-LDHs, possessing a shell thickness of ≈20 nm, exhibits a distinguished topology (SBET = 87.65m2 g-1), long surface carrier lifetime, and efficient charge-hole separation. Further photocatalytic hydrogen evaluation demonstrates an enhanced H2 evolution rate of 18.75 mmol g-1 h-1 with an apparent quantum efficiency of 16.3% at 420 nm. The recorded catalytic performance of the core-shell sample is 44.6 times higher than that of pure CZS nanospheres under visible light irradiation. Further density functional theory simulations indicate that sulfur atoms play the role of charge acceptor and surface Ni/Co atoms are electron donors, as well as a built-in electric field effect can be established. Altogether, this work takes advantage of strong S affinity from surface metal atoms, revealing the interfacial engineering toward improved visible-light-driven photocatalytic hydrogen evolution (PHE) activity.

Direct Observation of Z-Scheme Route in Cu31S16/ZnxCd1-xS Heteronanoplates for Highly Efficient Photocatalytic Hydrogen Evolution.

Although photocatalytic hydrogen production from water holds great potential as a renewable and sustainable energy alternative, the practical application of the technology demands cost-effective, simple photocatalytic systems with high efficiency in hydrogen evolution reaction (HER). Herein, the synthesis and characterization of Cu31S16/ZnxCd1-xS heterostructured nanoplates (Cu31S16/ZnCdS HNPs) as a high photocatalytic system are reported. The cost-effective, hierarchical structures are easily prepared using the Cu31S16 NPs as the seed by the epitaxial growth of the ZnCdS nanocrystals (NCs). The Cu31S16/ZnCdS without the noble metal cocatalyst exhibits a high HER rate of 61.7 mmol g-1 h-1, which is 8,014 and 17 times higher than that of Cu31S16 and ZnCdS, respectively, under visible light irradiation. The apparent quantum yield (AQY) of Cu31S16/ZnCdS reaches 67.9% at 400 nm with the highest value so far in the reported ZnCdS-based photocatalysts. The excellent activity and stability of the Cu31S16/ZnCdS are attributed to the formation of a strong internal electric field (IEF) and the Z-scheme pathway. The comprehensive experiments and theoretical calculations provide the direct evidences of the Z-scheme route. This work may offer a way for the design and development of efficient photocatalysts to achieve solar-to-chemical energy conversion at a practically useful level.

Sub-Band Assisted Z-Scheme for Effective Non-Sacrificial H2O2 Photosynthesis.

Photosynthesis of H2O2 from earth-abundant O2 and H2O molecules offers an eco-friendly route for solar-to-chemical conversion. The persistent challenge is to tune the photo-/thermo- dynamics of a photocatalyst toward efficient electron-hole separation while maintaining an effective driving force for charge transfer. Such a case is achieved here by way of a synergetic strategy of sub-band-assisted Z-Scheme for effective H2O2 photosynthesis via direct O2 reduction and H2O oxidation without a sacrificial agent. The optimized SnS2/g-C3N4 heterojunction shows a high reactivity of 623.0 µmol g-1 h-1 for H2O2 production under visible-light irradiation (λ > 400 nm) in pure water, ≈6 times higher than pristine g-C3N4 (100.5 µmol g-1 h-1). Photodynamic characterizations and theoretical calculations reveal that the enhanced photoactivity is due to a markedly promoted lifetime of trapped active electrons (204.9 ps in the sub-band and >2.0 ns in a shallow band) and highly improved O2 activation, as a result of the formation of a suitable sub-band and catalytic sites along with a low Gibbs-free energy for charge transfer. Moreover, the Z-Scheme heterojunction creates and sustains a large driving force for O2 and H2O conversion to high value-added H2O2.

Incorporating ReS2 Nanosheet into ZnIn2S4 Nanoflower as Synergistic Z-Scheme Photocatalyst for Highly Effective and Stable Visible-Light-Driven Photocatalytic Hydrogen Evolution and Degradation.

Inspired by natural photosynthesis, the visible-light-driven Z-scheme system is very effective and promising for boosting photocatalytic hydrogen production and pollutant degradation. Here, a synergistic Z-scheme photocatalyst is constructed by coupling ReS2 nanosheet and ZnIn2S4 nanoflower and the experimental evidence for this direct Z-scheme heterostructure is provided by X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, and electron paramagnetic resonance. Consequently, such a unique nanostructure makes this Z-scheme heterostructure exhibit 23.7 times higher photocatalytic hydrogen production than that of ZnIn2S4 nanoflower. Moreover, the ZnIn2S4/ReS2 photocatalyst is also very stable for photocatalytic hydrogen evolution, almost without activity decay even storing for two weeks. Besides, this Z-scheme heterostructure also exhibits superior photocatalytic degradation rates of methylene blue (1.7 × 10-2 min-1) and mitoxantrone (4.2 × 10-3 min-1) than that of ZnIn2S4 photocatalyst. The ultraviolet-visible absorption spectra, transient photocurrent spectra, open-circuit potential measurement, and electrochemical impedance spectroscopy reveal that the superior photocatalytic performance of ZnIn2S4/ReS2 heterostructure is mostly attributed to its broad and strong visible-light absorption, effective separation of charge carrier, and improved redox ability. This work provides a promising nanostructure design of a visible-light-driven Z-scheme heterostructure to simultaneously promote photocatalytic reduction and oxidation activity.

Z-Scheme Heterojunction of Hierarchical Cu2S/CdIn2S4 Hollow Cubes to Boost Photoelectrochemical Performance.

The exaltation of light-harvesting efficiency and the inhibition of fast charge recombination are pivotal to the improvement of photoelectrochemical (PEC) performance. Herein, a direct Z-scheme heterojunction is designed of Cu2S/CdIn2S4 by in situ growth of CdIn2S4 nanosheets on the surface of hollow CuS cubes and then annealing at 400 °C. The constructed Z-scheme heterojunction is demonstrated with electron paramagnetic resonance and redox couple (p-nitrophenol/p-aminophenol) measurements. Under illumination, it shows the photocurrent 6 times larger than that of hollow Cu2S cubes, and affords outstanding PEC performance over the known Cu2S and CdIn2S4-based photocatalysts. X-ray photoelectron spectroscopy and density functional theory results demonstrate a strong internal electric field formed in Cu2S/CdIn2S4 Z-scheme heterojunction, which accelerates the Z-scheme charge migration, thereby promoting electron-hole separation and enhancing their utilization efficiency. Moreover, the hollow structure of Cu2S is conducive to shortening the charge transport distance and improving light-harvesting capability. In proof-of-concept PEC application, a PEC detection method for miRNA-141 based on the sensitivity of benzo-4-chloro-hexadienone to light absorption on Cu2S/CdIn2S4 modified electrode is developed with good selectivity and a limit of detection of 32 aM. This work provides a simple approach for designing photoactive materials with highly efficient PEC performance.

Remembering Jan Amesz (1934-2001): a great gentleman, a major discoverer, and an internationally renowned biophysicist of both oxygenic and anoxygenic photosynthesisa.

We present here the research contributions of Jan Amesz (1934-2001) on deciphering the details of the early physico-chemical steps in oxygenic photosynthesis in plants, algae and cyanobacteria, as well as in anoxygenic photosynthesis in purple, green, and heliobacteria. His research included light absorption and the mechanism of excitation energy transfer, primary photochemistry, and electron transfer steps until the reduction of pyridine nucleotides. Among his many discoveries, we emphasize his 1961 proof, with L. N. M. Duysens, of the "series scheme" of oxygenic photosynthesis, through antagonistic effects of Light I and II on the redox state of cytochrome f. Further, we highlight the following research on oxygenic photosynthesis: the experimental direct proof that plastoquinone and plastocyanin function at their respective places in the Z-scheme. In addition, Amesz's major contributions were in unraveling the mechanism of excitation energy transfer and electron transport steps in anoxygenic photosynthetic bacteria (purple, green and heliobacteria). Before we present his research, focusing on his key discoveries, we provide a glimpse of his personal life. We end this Tribute with reminiscences from three of his former doctoral students (Sigi Neerken; Hjalmar Pernentier, and Frank Kleinherenbrink) and from several scientists (Suleyman Allakhverdiev; Robert Blankenship; Richard Cogdell) including two of the authors (G. Garab and A. Stirbet) of this Tribute.

Surface termination modulation for superior S-Scheme Bi2WO6/BiOI heterojunction photocatalyst: a hybrid density functional study.

The prevailing theoretical frameworks indicate that depending on the growth conditions, the Bi2WO6(001) surface can manifest in three distinct terminations-DL-O-Bi (DL: double layers), O-Bi, and O-W. In this study, we conduct a comprehensive examination of the interplay between these terminations on Bi2WO6(001) and the 1I-terminated BiOI(001) facet, especially focusing on their impact on the photocatalytic activity of Bi2WO6/BiOI heterostructure, applying hybrid functional calculations. The models formulated for this research are designated as Bi2WO6(O-Bi)/BiOI(1I), Bi2WO6(DL-O-Bi)/BiOI(1I), and Bi2WO6(O-W)/BiOI(1I). Our findings reveal that Bi2WO6(O-Bi)/BiOI(1I) shows a type II band alignment, which facilitates the spatial separation of photo-generated electrons and holes. Notably, the Bi2WO6(DL-O-Bi)/BiOI(1I) configuration has the lowest binding energy and results in an S-scheme (or Step-scheme) heterostructure. In contrast to the type II heterostructure, this particular configuration demonstrates enhanced photocatalytic efficiency due to improved photo-generated carrier separation, augmented oxidation capability, and better visible-light absorption. Conversely, Bi2WO6(O-W)/BiOI(1I) presents a type I projected band structure, which is less conducive for the separation of photo-generated electron-hole pairs. In summation, this investigation points out that one could significantly refine the photocatalytic efficacy of not only Bi2WO6/BiOI but also other heterostructure photocatalysts by modulating the coupling of different terminations via precise crystal synthesis or growth conditions.

Optoelectronic and photocatalytic behaviour of a type-II GaAlS2/HfS2heterostructure:ab initiostudy.

Theoretical examination based on first principle computation has been conducted for van der Waals heterostructure (vdwHS) GaAlS2/HfS2including structural, optoelectronic and photocatalytic characteristics. From the adhesion energy calculation, the AB configuration of GaAlS2/HfS2vdwHS is the most stable. A type-II GaAlS2/HfS2vdwHS is a dynamically and thermally stable structure. The band edge position, projected band, and projected charge densities verify the type-II alignment of GaAlS2/HfS2vdwHS. For GaAlS2/HfS2, GaAlS2is acting as a donor and HfS2is acting as an acceptor ensured by the charge density difference plot. The electron localized function validates the weak van der Waals interaction between GaAlS2and HfS2. The GaAlS2/HfS2vdwHS possess an indirect bandgap of 1.54 eV with notable absorption in the visible range. The findings assure that the GaAlS2/HfS2vdwHS is an efficient photocatalyst for pH 4-8. The band alignment of GaAlS2/HfS2is suitable for Z-scheme charge transfer. The strain influenced band edge suggests that the GaAlS2/HfS2vdwHS remains photocatalytic for strain-4%to+6%in both cases of uniaxial and biaxial strains.

Z-scheme heterojunction composed of Fe-doped g-C3N4 and Bi2MoO6 for photo-fenton degradation of antibiotics over a wide pH range: Activity and toxicity assessment.

In photo-Fenton technology, the narrower pH range limits its practical application for antibiotic wastewater remediation. Therefore, in this study, a Z-scheme heterojunction photo-Fenton catalyst was constructed by Fe-doped graphite-phase carbon nitride in combination with bismuth molybdate for the degradation of typical antibiotics. Fe doping can shorten the band gap and increase visible-light absorption. Simultaneously, the constructed Z-scheme heterojunction provides a better charge transfer pathway for the photo-Fenton reaction. Within 30 min, Fe3CN/BMO-3 removed 95.54% of tetracycline hydrochloride (TC), and its remarkable performance was the higher Fe3+/Fe2+ conversion efficiency through the decomposition of H2O2. The Fe3CN/BMO-3 catalyst showed remarkable photo-Fenton degradation performance in a wide pH range (3.0-11.0), and it also had good stability in the treatment of TC wastewater. Furthermore, the order of action of the active species was h+ > ·O2- > 1O2 > ·OH, and the toxicity assessment suggested that Fe3CN/BMO-3 was effective in reducing the biotoxicity of TC. The catalyst proved to be an economically feasible and applicable material for antibiotic photo-Fenton degradation, and this study provides another perspective on the application of elemental doping and constructed heterojunction photo-Fenton technology for antibiotic water environmental remediation.

Rational design and construction of direct Z-scheme ternary heterojunction photocatalyst AgBr/CoWO4/Ag for efficient environmental remediation.

The indiscriminate discharge of micropollutants (e.g., dyes, antibiotics, industrial additives, etc.) represents a significant risk to human health, and the removal of these substances from water bodies has become a prominent area of research within the field of environmental remediation. A simple hydrothermal-precipitation-photoreduction method was employed to synthesize novel Z-scheme heterojunction photocatalysts of AgBr/CoWO4/Ag. The catalysts demonstrated remarkable degradation capabilities with regard to a range of micropollutants present in wastewater. Of the catalysts tested, 5AgBr/CoWO4/Ag exhibited the highest degradation rates, reaching 98.58% for Rhodamine B, 86.82% for tetracycline hydrochloride, and 95.60% for 2-mercaptobenzothiazole within 60 min. In particular, the reaction kinetic rate of 5AgBr/CoWO4/Ag towards Rhodamine B degradation (k2 = 0.26278 L mg-1·min-1) is 9 times that of AgBr (k2 = 0.02953 L mg-1·min-1) and 113 times that of CoWO4 (k2 = 0.00233 L mg-1·min-1), which serves to highlight the exceptional photocatalytic activity of the material. The experimental data and subsequent analysis indicated that the enhanced photocatalytic performance can be attributed to two factors: firstly, the electron mediation by Ag nanoparticles leading to improved charge separation efficiency, and secondly, the formation of Z-scheme heterojunctions between AgBr and CoWO4. The cyclic tests provided confirmation of the excellent stability and recyclability of the AgBr/CoWO4/Ag photocatalysts. It is anticipated that this study will facilitate the development of novel methods for the degradation of refractory micropollutants and provide insights into environmental remediation, thereby contributing to the sustainable development of society.

All-solid-state Z-scheme ZnFe-LDH/rGO/g-C3N5 heterojunction for enhanced sonophotocatalytic degradation of ciprofloxacin: Performance and mechanistic insights.

The fabrication of all-solid-state Z-scheme sonophotocatalysts is vital for improving the transfer rate of photogenerated electrons to remove antibiotics present in wastewater. Herein, a novel indirect Z-scheme ZnFe-layered double hydroxide (LDH)/reduced graphene oxide (rGO)/graphitic carbon nitride (g-C3N5) heterojunction was synthesized using a simple strategy. The ZnFe-LDH/rGO/g-C3N5 (ZF@rGCN) ternary composites were systematically characterized using different techniques. Results revealed that the 15%ZF@rGCN catalyst achieved a ciprofloxacin (CIP) degradation efficiency of 95% via the synergistic effect of sonocatalysis and photocatalysis. The improved sonophotocatalytic performance of the ZF@rGCN heterojunction was attributed to an increase in the number of active sites, a Z-scheme charge-transfer channel in ZF@rGCN, and an extended visible light response range. The introduction of rGO further enhanced the charge-transfer rate and preserved the reductive and oxidative sites of the ZF@rGCN system, thereby affording additional reactive species to participate in CIP removal. In addition, owing to its unique properties, rGO possibly increased the absorption of incident light and served as an electronic bridge in the as-formed ZF@rGCN catalyst. Finally, the possible CIP degradation pathways and the sonophotocatalytic Z-scheme charge-migration route of ZF@rGCN were proposed. This study presents a new approach for fabricating highly efficient Z-scheme sonophotocatalysts for environmental remediation.

Boosted charge separation via Ce2S3 over dual Z-scheme ZnO-Ce2S3-MnO2 core double-shell nanocomposite for the degradation of diverse dye pollutants.

Herein, core double-shell direct dual Z-scheme ZnO-Ce2S3-MnO2 nanocomposite was synthesized via a hydrothermal route along with pure ZnO, Ce2S3, MnO2, and characterized by numerous characterization tools for application in synthetic dyes degradation. The XRD, Raman, and FTIR analyses have confirmed the nanocomposite formation. TEM images exhibited the core double-shell morphology with an average particle diameter of 81 nm and stacking of ZnO, Ce2S3, and MnO2. EDX confirmed the existence of desired elements in the grown composition. The varied oxidation states, presence of defects, and fast charge transfer were also revealed from XPS, PL, and EIS. The ZnO-Ce2S3-MnO2 nanocomposite has an optical energy bandgap of 2.84 eV, capable of decomposing harmful dyes with excellent efficiency, 99.81% MB, 97.62% MO, 88.5% MR, and 58.9% EY in 40 min sunlight exposure. The effect of several operating parameters is also observed and obtained results showed the optimal catalyst dose was 20 mg, pH of 8, and dye concentration of 10 ppm. The scavenger's experiment suggests that •O2- and •OH are the main active radicals in the photodegradation reaction which is also evident in the dual Z-scheme formation. The MnO2 and ZnO layers covered the Ce2S3 (core) and dual Z-scheme formation allows rapid kinetics of redox reaction and provides plenteous channels for transfer of photo-generated charge carriers during photocatalysis. Thus, core double-shell direct dual Z-scheme photocatalysts having inorganic components could be an excellent choice for photocatalysis at the industrial level, particularly for water purification.

Developing In2S3 upon modified MgTiO3 anchored on nitrogen-doped CNT for sustainable sensing and removal of toxic insecticide clothianidin.

Herein, the study introduces a novel bifunctional In2S3/MgTiO3/TiO2@N-CNT (IMTNC) nanocomposite, which is poised to revolutionize the detection and removal of clothianidin (CLD) from aquatic environments by synergistic adsorption and photodegradation. Confirmation of the material's synthesis was done using structural, optical, morphological, and chemical characterizations. An outstanding sensitivity of 2.168 µA/nM.cm2 with a linear range of 4-100 nM and a LOD of 0.04 nM, along with an exceptional elimination efficiency of 98.06 ± 0.84% for about 10 ppm CLD within 18 min was demonstrated by the IMTNC nanocomposite. Extensive studies were carried out to appraise the material's effectiveness in the presence of various interfering species, such as cations, anions, organic compounds, and different water matrices, and a comprehensive assessment of its stability throughout several cycles was made. Response Surface Methodology (RSM) study was used to determine the ideal removal conditions for improved performance. In addition, the catalytic performance in removing various other pollutants was also analyzed. Adding In2S3 and developing N-doped Carbon Nanotubes (N-CNT) increased conductivity and higher electrochemical sensing skills, improving charge transfer and increasing photocatalytic activity. This research underscores the potential of the IMTNC nanocomposite as a promising candidate for advanced environmental sensing and remediation applications.