Ellagitannin Content in Extracts of the Chestnut Wood Aesculus.

The chestnut tree (Castanea sativa Mill.) is a widespread plant in Europe, rich in high-value compounds, which can be divided mainly into monomeric polyphenols and tannins. These compounds exhibit various biological activities, such as antioxidant, as well as anticarcinogenic and antimicrobial properties. Chestnut wood (CW) extracts were prepared using different extraction techniques, process conditions, solvents, and their mixtures. This work aimed to test various extraction techniques and determine the optimal solvent for isolating enriched fractions of vescalagin, castalagin, vescalin, and castalin from CW residues. Supercritical CO2 extraction with a more polar cosolvent was applied at different pressures, which influenced solvent density. According to the results, the proportions of the components strongly depended on the solvent system used for the extraction. In addition, HPLC-DAD was used for semiqualitative purposes to detect vescalagin, castalagin, vescalin, and castalin. The developed valorization protocol allows efficient fractionation and recovery of the polyphenolic components of CW through a sustainable approach that also evaluates pre-industrial scaling-up.

Recent advances in extraction technologies for recovery of bioactive compounds derived from fruit and vegetable waste peels: A review.

Fruits and vegetables are the most important commodities of trade value among horticultural produce. They are utilized as raw or processed, owing to the presence of health-promoting components. Significant quantities of waste are produced during fruits and vegetables processing that are majorly accounted by waste peels (∼90-92%). These wastes, however, are usually exceptionally abundant in bioactive molecules. Retrieving these valuable compounds is a core objective for the valorization of waste peel, besides making them a prevailing source of beneficial additives in food and pharmaceutical industry. The current review is focused on extraction of bioactive compounds derived from fruit and vegetable waste peels and highlights the supreme attractive conventional and non-conventional extraction techniques, such as microwave-assisted, ultrasound assisted, pulsed electric fields, pulsed ohmic heating, pressurized liquid extraction, supercritical fluid extraction, pressurized hot water, high hydrostatic pressure, dielectric barrier discharge plasma extraction, enzyme-assisted extraction and the application of "green" solvents say as well as their synergistic effects that have been applied to recover bioactive from waste peels. Superior yields achieved with non-conventional technologies were identified to be of chief interest, considering direct positive economic consequences. This review also emphasizes leveraging efficient, modern extraction technologies for valorizing abundantly available low-cost waste peel, to achieve economical substitutes, whilst safeguarding the environment and building a circular economy. It is supposed that the findings discussed though this review might be a valuable tool for fruit and vegetable processing industry to imply an economical and effectual sustainable extraction methods, converting waste peel by-product to a high added value functional product.

Green approach for polyphenol extraction from waste tea biomass: Single and hybrid application of conventional and ultrasound-assisted extraction.

Based on a green approach, the potential use of waste tea biomass (fiber and second sieving) with rich polyphenol content was investigated as an alternative source of polyphenol to achieve an economic added value. In addition, this study demonstrated a comparative approach to explore the most sustainable green extraction method by the assessment of single ultrasound-assisted extraction (UAE) at various frequencies (20, 35, and 200 kHz) and the hybrid operations of ultrasound (US) and thermal extraction (50 °C and 80 °C). As a result, it has been determined that waste tea biomass, with a polyphenol extraction rate of more than 80%, provides a higher recovery capacity than tea leaf (the highest polyphenol recovery rate of 72.5%) in almost all single operations. Among the single UAE, 20 kHz was expressed as the method succeeding with high recovery rates (84%) within 30 min for fiber waste. In contrast, the hybrid operation consisting of 20 kHz US (20 min) with heating at 80 °C (10 min) yielded the highest extraction efficiency with 92% in the same time interval more economically for second sieving waste tea biomass. Therefore, this study has shown that it is possible to utilize UAE alone or in combination with heat extraction from tea waste for environmentally friendly, rapid, and effective polyphenol extraction.

A Critical Comparison of the Advanced Extraction Techniques Applied to Obtain Health-Promoting Compounds from Seaweeds.

Marine macroalgae are rich in bioactive compounds that can be applied in several fields, mainly food, cosmetics, and medicine. The health-promoting effects of bioactive compounds, such as polyphenols, polysaccharides, carotenoids, proteins, and fatty acids, have been increasingly explored, especially regarding their antioxidant activity and improvement in human health. To extract these valuable compounds, advanced technologies that include Supercritical-Fluid Extraction (SFE), Pressurised-Liquid Extraction (PLE), Ultrasound-Assisted Extraction (UAE), Microwave-Assisted Extraction (MAE), Enzyme-Assisted Extraction (EAE), Ultrasound-Microwave-Assisted Extraction (UMAE) and Liquefied Gas Extraction (LGE) have been assessed due to their notable advantages over the conventional methods (Solid-Liquid and Soxhlet extraction). These advanced techniques are considerably influenced by different extraction parameters such as temperature, pressure, type of solvent, extraction time, solvent:solid material ratio, power (MAE, UAE, and UMAE), enzymes used (EAE), and factors related to the macroalgae matrix itself. Optimizing these process parameters for each method is critical to obtain better efficiency results for the targeted bioactive compounds. Macroalgae are natural sources with undeniable beneficial effects on human health. In this context, optimising the extraction techniques discussed in this review should prioritise exploiting these valuable resources' wide range of bioactive properties.

A Comparative Study between Conventional and Advanced Extraction Techniques: Pharmaceutical and Cosmetic Properties of Plant Extracts.

This study aimed to compare the influence of extraction methods on the pharmaceutical and cosmetic properties of medicinal and aromatic plants (MAPs). For this purpose, the dried plant materials were extracted using advanced (microwave (MAE), ultrasonic (UAE), and homogenizer (HAE) assisted extractions) and conventional techniques (maceration, percolation, decoction, infusion, and Soxhlet). The tyrosinase, elastase, α-amylase, butyryl, and acetylcholinesterase inhibition were tested by using L-3,4 dihydroxy-phenylalanine, N-Succinyl-Ala-Ala-p-nitroanilide, butyryl, and acetylcholine as respective substrates. Antioxidant activities were studied by ABTS, DPPH, and FRAP. In terms of extraction yield, advanced extraction techniques showed the highest values (MAE > UAE > HAE). Chemical profiles were dependent on the phenolic compounds tested, whereas the antioxidant activities were always higher, mainly in infusion and decoction as a conventional technique. In relation to the pharmaceutical and cosmetic properties, the highest inhibitory activities against α-amylase and acetylcholinesterase were observed for Soxhlet and macerated extracts, whereas the highest activity against tyrosinase was obtained with MAE > maceration > Soxhlet. Elastase and butyrylcholinesterase inhibitory activities were in the order of Soxhlet > maceration > percolation, with no activities recorded for the other tested methods. In conclusion, advanced methods afford an extract with high yield, while conventional methods might be an adequate approach for minimal changes in the biological properties of the extract.

Development of ANN models based on combined UV-vis-NIR spectra for rapid quantification of physical and chemical properties of industrial hemp extracts.

OBJECTIVES: The aim of this study was to develop artificial neural network (ANNs) models for prediction of physical (total dissolved solids, extraction yield) and chemical (total polyphenolic content, antioxidant activity) properties of industrial hemp extracts, prepared by two different extraction methods (solid-liquid extraction and microwave-assisted extraction) based on combined UV-VIS-NIR spectra. Spectral data were gathered for 46 samples per extraction method. RESULTS: The PCA analysis ensured efficient separation of the samples based on the amount of ethanol in extraction solvent using NIR spectra for both conventional and microwave-assisted extraction. CONCLUSIONS: Results showed that reliable ANN models (R2 >0.7000) for describing physical, chemical, and simultaneously physical and chemical characteristics can be developed based on combined UV-VIS-NIR spectra of industrial hemp extracts without spectra pre-processing.

Optimisation of Ultrasound Frequency, Extraction Time and Solvent for the Recovery of Polyphenols, Phlorotannins and Associated Antioxidant Activity from Brown Seaweeds.

This study investigates ultrasound assisted extraction (UAE) process parameters (time, frequency and solvent) to obtain high yields of phlorotannins, flavonoids, total phenolics and associated antioxidant activities from 11 brown seaweed species. Optimised UAE conditions (35 kHz, 30 min and 50% ethanol) significantly improved the extraction yield from 1.5-fold to 2.2-fold in all seaweeds investigated compared to solvent extraction. Using ultrasound, the highest recovery of total phenolics (TPC: 572.3 ± 3.2 mg gallic acid equivalent/g), total phlorotannins (TPhC: 476.3 ± 2.2 mg phloroglucinol equivalent/g) and total flavonoids (TFC: 281.0 ± 1.7 mg quercetin equivalent/g) was obtained from Fucus vesiculosus seaweed. While the lowest recovery of TPC (72.6 ± 2.9 mg GAE/g), TPhC (50.3 ± 2.0 mg PGE/g) and TFC (15.2 ± 3.3 mg QE/g) was obtained from Laminaria digitata seaweed. However, extracts from Fucus serratus obtained by UAE exhibited the strongest 1,1-diphenyl-2-picryl-hydrazyl (DPPH) scavenging activity (29.1 ± 0.25 mg trolox equivalent/g) and ferric reducing antioxidant power (FRAP) value (63.9 ± 0.74 mg trolox equivalent/g). UAE under optimised conditions was an effective, low-cost and eco-friendly technique to recover biologically active polyphenols from 11 brown seaweed species.

Effect of Different Green Extraction Methods and Solvents on Bioactive Components of Chamomile (Matricaria chamomilla L.) Flowers.

Chamomile (Matricaria chamomilla L.) dried flowers contain a group of interesting biologically active compounds such as sesquiterpenes, flavonoids, coumarins, vitamins, phenolic acids and glucosides. Therefore, the aim of the present study was to characterize the composition in bioactive compounds (specialized metabolites) present in water and ethanol extracts of chamomile flowers, together with monitoring the impact of different extraction techniques (conventional vs. ultrasound-assisted extraction (UAE)) on the parameters under investigation. UAE treatment significantly decreased the extraction time of bioactive compounds from herbal material. Polyphenolic compounds content and antioxidant capacity were significantly higher in UAE extracts. Moreover, solvent type had a significant impact on the specialized metabolites content, while the highest vitamin C and polyphenols content were recorded in 50% ethanol (v/v) extracts. Optimization of basic extraction factors: solvent type, temperature and technique is crucial for obtaining the extracts with the highest content of specialized metabolites and antioxidant capacity.

Obtaining Bioactive Compounds from the Coffee Husk (Coffea arabica L.) Using Different Extraction Methods.

Coffee husks (Coffea arabica L.) are characterized by exhibiting secondary metabolites such as phenolic compounds, which can be used as raw material for obtaining bioactive compounds of interest in food. The objective of this study is to evaluate different methods for obtaining the raw material and extracting solutions of bioactive compounds from coffee husks. Water bath and ultrasound-assisted extraction methods were used, using water (100%) or ethanol (100%) or a mixture of both (1:1) as extracting solutions and the form of the raw material was in natura and dehydrated. The extracts were evaluated by their antioxidant potential using DPPH radicals, ABTS, and iron reduction (ferric reducing antioxidant power (FRAP)), and later total phenolic compounds, total flavonoids, and condensed tannins were quantified the phenolic majority compounds were identified. It was verified that the mixture of water and ethanol (1:1) showed better extraction capacity of the compounds with antioxidant activity and that both conventional (water bath) or unconventional (ultrasound) methods showed satisfactory results. Finally, a satisfactory amount of bioactive compounds was observed in evaluating the chemical composition (total phenolic compounds, total flavonoids, condensed tannins, as well as the analysis of the phenolic profile) of these extracts. Corroborating with the results of the antioxidant activities, the best extracting solution was generally the water and ethanol mixture (1:1) using a dehydrated husk and water bath as the best method, presenting higher levels of the bioactive compounds in question, with an emphasis on chlorogenic acid. Thus, it can be concluded that the use of coffee husk as raw material to obtain extracts of bioactive compounds is promising. Last, the conventional method (water bath) and the water and ethanol mixture (1:1) stood out among the methods and extracting solutions used for the dehydrated coffee husk.

Ultrasound-Assisted Extraction for the Recovery of Carotenoids from Guava's Pulp and Waste Powders.

In this work, lycopene- and ß-carotene-rich extracts were obtained from guava's pulp and waste powders using maceration (ME), ultrasonic bath (BUAE, 25 °C for 30 min), and ultrasonic probe (PUAE, 25 °C for 5 min). Extracts were evaluated for total carotenoid content, antioxidant capacity, color, and lycopene and ß-carotene content by HPLC-DAD. Bath-type ultrasound-assisted extraction (BUAE) was the best technique to obtain lycopene from guava pulp (135.0 mg 100 g-1) and waste (76.64 mg 100 g-1), followed by ME (pulp = 107.6, waste = 43.57 mg 100 g-1), and PUAE (pulp = 44.19, waste = 33.83 mg 100 g-1). The total carotenoid content positively affected the extracts' antioxidant capacity. Dehydration of guava fractions showed to be an efficient method to increase carotenoid availability. This is the first work to report the recovery of carotenoids from guava by ultrasonic extraction. Furthermore, this method has shown to be a suitable approach to reduce extraction time and solvent use. These extracts could be further applied to lipid-rich foods as a natural antioxidant and/or as an ingredient in the development of functional foods.

Recent advances and comparisons of conventional and alternative extraction techniques of phenolic compounds.

Phenolic compounds are a group of secondary metabolites produced by plants under stressful conditions. Phenolic compounds play an important role in the prevention and treatment of certain illnesses and are exploited by the food and pharmaceutical industries. Conventional methods are commonly used as models to compare the efficiencies of alternative extraction methods. Among alternative extraction processes, microwave-assisted extraction (MAE), pressurized liquid extraction (PLE), supercritical fluid extraction (SFE) and ultrasonic-assisted extraction (UAE) are the most studied. These methods produce extracts rich in phenolic compounds using moderate temperatures, short extraction times, and solvents generally recognized as safe. The combination of extraction time and temperature plays a critical role in the stability of the compounds. Solvents of higher polarity enhance the extraction of phenolic compounds. The use of the ethanol-water mixture for MAE, PLE, and UAE is recommended. MAE and UAE involve shorter extraction times than do PLE and SFE. SFE requires a low average temperature (40 °C). MAE produces the highest total phenolic content [227.63 mg GAE/g dry basis (d.b.)], followed by PLE (173.65 mg GAE/g d.b.), UAE (92.99 mg GAE/g d.b.) and SFE (37 mg GAE/g d.b.). Extraction yields and recovery rates of the phenolic compounds can be enhanced by combining and integrating extraction methods.

Optimization and comparison of non-conventional extraction technologies for Citrus paradisi L. peels: a valorization approach.

The phenolics from grapefruit peel were obtained by ultrasound assisted extraction (UAE) and enzyme-assisted extraction (EAE). Extraction parameters were optimized using response surface methodology to maximize the yield of total phenolic content (TPC) and total flavonoid content (TFC). The optimized extracts from UAE and EAE were then compared with conventional solvent extraction for their TPC, TFC, antioxidant activity and phenolic composition. The best optimized conditions for UAE was obtained at 33.12 min extraction time, 71.11% amplitude and a solvent-solid (SS) ratio of 39.63 mL/g. The optimized parameters for EAE were 4.81 h extraction time, 0.9% enzyme concentration and 40 mL/g SS ratio. Similar values of experimental and predicted TPC and TFC at optimized conditions indicates the suitability of the quadratic model in optimizing the extraction parameters. Further characterization of extracts suggested EAE as most efficient process in extracting bioactive compounds.

Natural colorants: Pigment stability and extraction yield enhancement via utilization of appropriate pretreatment and extraction methods.

Natural colorants from plant-based materials have gained increasing popularity due to health consciousness of consumers. Among the many steps involved in the production of natural colorants, pigment extraction is one of the most important. Soxhlet extraction, maceration, and hydrodistillation are conventional methods that have been widely used in industry and laboratory for such a purpose. Recently, various non-conventional methods, such as supercritical fluid extraction, pressurized liquid extraction, microwave-assisted extraction, ultrasound-assisted extraction, pulsed-electric field extraction, and enzyme-assisted extraction have emerged as alternatives to conventional methods due to the advantages of the former in terms of smaller solvent consumption, shorter extraction time, and more environment-friendliness. Prior to the extraction step, pretreatment of plant materials to enhance the stability of natural pigments is another important step that must be carefully taken care of. In this paper, a comprehensive review of appropriate pretreatment and extraction methods for chlorophylls, carotenoids, betalains, and anthocyanins, which are major classes of plant pigments, is provided by using pigment stability and extraction yield as assessment criteria.

Optimization of Extraction Conditions of Bioactive Compounds From Kurdistan Species Urtica dioica.

INTRODUCTION: Phytotherapeutics derived from medicinal plants treat various illnesses, including viral infections such as SARS, MERS, and SARSCoV-2, as well as bacterial and fungal diseases. It highlights ongoing research into the chemical compositions of plant components for developing new drugs, with a particular emphasis on anti-cytotoxic agents for anticancer drugs. Traditional extraction methods have limitations, leading to the exploration of environmentally friendly technologies such as ultrasound-assisted, supercritical fluid, microwave-assisted, and accelerated solvent extraction. The paragraph concludes by stating the aim of a specific study to optimize extraction conditions of bioactive compounds from Urtica dioica in Kurdistan, comparing conventional and non-conventional extraction methods, solvents, and extraction times. MATERIALS AND METHODS: The study was conducted between June 2022 and August 2022, fresh leaves and stems of U. dioica plant were collected and sequentially underwent four extraction methods (maceration, Soxhlet, ultrasound-assisted extraction (UAE), and microwave-assisted extraction (MAE) by using petroleum ether, chloroform, ethanol, and distilled-water as solvents. RESULTS: The results highlighted significant variations in the yields of bioactive compounds based on the extraction method, solvent type, and duration. Among conventional methods, Soxhlet was the most powerful method and had the most extraction yields, while maceration had the lowest yields. The modern techniques surpassed the conventional methods by producing high extraction yields within a shorter time (a few minutes) and using a lesser amount of solvent. Consequently, UAE and MAE emerge as the most efficient techniques. Hence, MAE effectively produced the highest extraction yields and is considered the preferred technique. The choice of solvents significantly influenced the extraction yields, with ethanol consistently emerging as an effective solvent across various extraction methods. In contrast, petroleum ether demonstrated the lowest efficacy as a solvent. Furthermore, the results unveiled the impact of extraction time on yields, indicating a correlation between increased time and extraction yield in certain cases. CONCLUSION: Extraction is a very critical step in the study of medicinal plants. The amount of extracted compounds is significantly affected by the extraction method, solvent, and time. Ethanol stands out as the most effective solvent, producing the highest yields of bioactive compounds, while petroleum ether yields the least. Additionally, extraction yield shows a direct relation with extraction time. Soxhlet being the most powerful among conventional methods and maceration yields the least. Modern techniques, particularly UAE and MAE, surpass conventional methods by achieving high yields in shorter times with less solvent. MAE, in particular, offers advantages such as shortened extraction time, increased efficiency, reduced labor, and enhanced selectivity, making it the preferred method for extracting bioactive compounds from aerial parts U. dioica.

Extraction and Concentration of Spirulina Water-Soluble Metabolites by Ultrafiltration.

Spirulina (Arthospira platensis) is known for its rich content of natural compounds like phycocyanin, chlorophylls, carotenoids, and high protein levels, making it a nutrient-dense food. Over the past decade, research has aimed to optimize the extraction, separation, and purification of these valuable metabolites, focusing on technologies such as high-pressure processing, ultrasound-assisted extraction, and microwave-assisted extraction as well as enzymatic treatments, chromatographic precipitation, and membrane separation. In this study, various extraction methods (conventional vs. ultrasound-assisted), solvents (water vs. phosphate buffer), solvent-to-biomass ratios (1:5 vs. 1:10), and ultrafiltration (PES membrane of MWCO 3 kDa, 2 bar) were evaluated. The quantities of total protein, phycocyanin (PC), chlorophyll a (Cla), and total carotenoids (TCC) were measured. The results showed that ultrasound-assisted extraction (UAE) with phosphate buffer at a 1:10 ratio yielded a metabolite-rich retentate (MRR) with 37.0 ± 1.9 mg/g of PC, 617 ± 15 mg/g of protein, 0.4 ± 0.2 mg/g of Cla, and 0.15 ± 0.14 mg/g of TCC. Water extraction in the concentration process achieved the highest concentrations in MRR, with approximately 76% PC, 92% total protein, 62% Cla, and 41% TCC. These findings highlight the effective extraction and concentration processes to obtain a metabolite-rich retentate from Spirulina biomass, reducing the volume tenfold and showing potential as a functional ingredient for the food, cosmetic, and pharmaceutical industries.

Effect of ultrasonic and conventional extraction on bioactive components, glucosinolate content and antidiabetic activity of Crambe tataria.

This study was conducted to determine and compare the phenolic compounds, glucosinolate contents and antidiabetic effects of the extracts obtained by ultrasonic and conventional extraction method of the leaves and flowers of the Crambe tataria. The highest antioxidant activity (12.95 mg/mL IC50 value) and total phenolic content (1313.57 mg GAE/100 g fw) were detected in the ultrasonic flower extract. In total flavonoid results, extracts obtained from the flower part of C. tataria had higher values than that of extracts obtained from the leaf part. The most abundant phenolic component in the flower extract was catechin. The highest catechin content in all samples was detected in the ultrasonic flower extract with a value of 374.37 mg/kg. Rutin was the dominant phenolic component in the leaf extract. Rutin values were 654.38 mg/kg and 757.30 mg/kg for conventional and ultrasonic extraction, respectively. In glucosinolate analysis, the highest glucoraphanin content was obtained in flower samples and by conventional extraction method (3466.84 mg/kg). The highest contents of sinigrin (689.97 mg/kg), glucotropaeolin (420.89 mg/kg), glucoerucin (357.27 mg/kg), glucoraphasatin (181.11 mg/kg) and gluconasturtin (66.07 mg/kg) were detected in ultrasonic flower extracts. The highest α-amylase and α-glucosidase enzyme inhibition effects belonged to the ultrasonic flower extract with values of 3.70 mg/mL and 4.89 mg/mL, respectively. As a result, this study determined for the first time that ultrasonic extraction of C. tataria flowers has much higher bioactive components and antidiabetic effects, revealing the potential use of this plant in the fields of medicine, pharmacology and chemistry.

Characterization of the Chemical Composition and Biological Activities of Bog Bilberry (Vaccinium uliginosum L.) Leaf Extracts Obtained via Various Extraction Techniques.

This investigation aimed to assess the chemical composition and biological activities of bog bilberry (Vaccinium uliginosum L.) leaves. Hydroethanolic extracts were obtained using four extraction techniques: one conventional (CE) and three alternative methods; ultrasound (UAE), microwave (MAE) and high-pressure (HPE) extractions. Spectrophotometric analysis was conducted to determine their chemical content, including the total phenolic content (TPC) and total flavonoid content (TFC). Furthermore, their antioxidative and antimicrobial properties were evaluated. HPLC (high performance liquid chromatography) analysis identified and quantified 17 phenolic compounds, with chlorogenic acid being the predominant compound, with the lowest level (37.36 ± 0.06 mg/g) for the bog bilberry leaf extract obtained by CE and the highest levels (e.g., HPE = 44.47 ± 0.08 mg/g) for the bog bilberry leaf extracts obtained by the alternative methods. Extracts obtained by HPE, UAE and MAE presented TPC values (135.75 ± 2.86 mg GAE/g; 130.52 ± 1.99 mg GAE/g; 119.23 ± 1.79 mg GAE/g) higher than those obtained by the CE method (113.07 ± 0.98 mg GAE/g). Regarding the TFC values, similar to TPC, the highest levels were registered in the extracts obtained by alternative methods (HPE = 43.16 ± 0.12 mg QE/g; MAE = 39.79 ± 0.41 mg QE/g and UAE = 33.89 ± 0.35 mg QE/g), while the CE extract registered the lowest level, 31.47 ± 0.28 mg QE/g. In the case of DPPH (1,1-diphenyl-2-picrylhydrazyl) antioxidant activity, the extracts from HPE, UAE and MAE exhibited the strongest radical scavenging capacities of 71.14%, 63.13% and 60.84%, respectively, whereas the CE extract registered only 55.37%. According to Microbiology Reader LogPhase 600 (BioTek), a common MIC value of 8.88 mg/mL was registered for all types of extracts against Staphylococcus aureus (Gram-positive bacteria) and Salmonella enterica (Gram-negative bacteria). Moreover, the alternative extraction methods (UAE, HPE) effectively inhibited the growth of Candida parapsilosis, in comparison to the lack of inhibition from the CE method. This study provides valuable insights into bog bilberry leaf extracts, reporting a comprehensive evaluation of their chemical composition and associated biological activities, with alternative extraction methods presenting greater potential for the recovery of phenolic compounds with increased biological activities than the conventional method.

Valorization of Grape Pomace as a Renewable Source of Techno-Functional and Antioxidant Pectins.

The food industry's increasing demand for new functional ingredients that meet both organoleptic and healthy requirements has driven the exploration of new sources of functional ingredients in agro-industrial by-products. The aim of this work was to valorize grape pomace (Vitis vinifera L. garnacha) as a source of pectins using food-grade extracting agents. Obtained pectins were evaluated for monomeric composition, methyl esterification, molecular weight, water retention, oil-holding capacity, and antioxidant properties. The relatively soft extraction conditions used permitted obtaining low methoxyl pectin (10-42%) enriched in homogalacturonan (38-45%) or rhamnogalacturonan (33-41%) with different branching degrees, molecular weight, and fewer impurities than those found in the scarce previous literature. The relationship between structure and functionality was studied. Among the different pectins obtained, the sample derived from the extraction with sodium citrate could resume the best characteristics, such as pectin purity and higher water retention and oil holding capacity. These results underscore the relevance of grape pomace as a viable alternative source of pectin.

Phytochemical Profiles and In Vitro Immunomodulatory Activities of Extracts Obtained from Limonium gmelinii Using Different Extraction Methods.

Limonium (L.) gmelinii is a valuable pharmacopoeial Kazakhstani plant. Several studies have reported on the various biological activities of the plant. The purpose of our research was to study and compare the extraction yields, immunomodulatory activities, and chemical compositions of extracts from the above-ground parts of L. gmelinii obtained via conventional extraction (CE; Extract 1) and ultrasound-assisted extraction (UAE; Extract 2). The extracts were characterized by a considerable number of polyphenols and flavonoids: 378.1 ± 4.5 and 382.2 ± 3.3 GAE mg/g, and 90.22 ± 2.8 and 94.61 ± 1.9 QE mg/g in Extract 1 and Extract 2, respectively. Extract 2 had a slightly higher extraction yield (33.5 ± 2.4%) than Extract 1 (30.2 ± 1.6%). Liquid Chromatography-Diode-Array Detection-Electrospray Ionization-Quadrupole Time-of-Flight Mass Spectrometry (LC-QToF-MS) revealed the presence of 54 biologically active compounds in both extracts. It was shown that the studied extracts stimulate the secretion of TNF-α and IL-6 by intact mouse peritoneal macrophages and splenic lymphocytes, whilst they have an inhibitory effect on the secretion of these cytokines by activated immune cells. Both extracts demonstrated similar patterns of stimulation and inhibition in a splenocyte proliferation assay. Altogether, the L. gmelinii extracts obtained via CE and UAE might be suggested as effective immunomodulatory agents. The application of UAE for this purpose seems to be more efficient with a view of obtaining of a highly potent extract in a much shorter time.

Study of the antioxidant and anti-pancreatic cancer activities of Anchusa strigosa aqueous extracts obtained by maceration and ultrasonic extraction techniques.

Pancreatic cancer is a highly aggressive malignancy and a leading cause of cancer-related deaths worldwide. Moreover, the incidence and mortality rates for pancreatic cancer are projected to keep increasing. A major challenge in the treatment of pancreatic cancer is the lack of effective screening approaches, which contributes to its poor prognosis, indicating the need for new treatment regimens and alternative therapies, such as herbal medicine. The medicinal plant A. strigosa, which is widely distributed in the Eastern Mediterranean region, is a short prickly plant from the Boraginaceae family that has been widely used in traditional medicine for treating various diseases. Nevertheless, its effect on human pancreatic cancer remains poorly investigated. In the present study, we screened the phytochemical content of Anchusa strigosa aqueous extracts obtained by maceration and ultrasound-assisted methods (ASM and ASU, respectively) and evaluated their antioxidant effects. We also investigated their anticancer effects and possible underlying mechanisms. The results show that both extracts were rich in bioactive molecules, with slight differences in their composition. Both extracts exhibited remarkable antioxidant potential and potent radical-scavenging activity in vitro. Additionally, non-cytotoxic concentrations of both extracts attenuated cell proliferation in a time- and concentration-dependent manner, which was associated with a decrease in the proliferation marker Ki67 and an induction of the intrinsic apoptotic pathway. Furthermore, the extracts increased the aggregation of pancreatic cancer cells and reduced their migratory potential, with a concomitant downregulation of integrin ß1. Finally, we showed that the ASM extract caused a significant decrease in the levels of COX-2, an enzyme that has been linked to inflammation, carcinogenesis, tumor progression, and metastasis. Taken together, our findings provide evidence that A. strigosa extracts, particularly the extract obtained using the maceration method, have a potential anticancer effect and may represent a new resource for the design of novel drugs against pancreatic cancer.