Oxidative Quality of Acid Oils and Fatty Acid Distillates Used in Animal Feeding.

Acid oils (AO) and fatty acid distillates (FAD) are byproducts from chemical and physical refining of edible oils and fats, respectively. Their high energy value makes their upcycling interesting as alternatives to conventional fats in animal feeding. The objective of this study is to characterize their oxidative quality and to provide recommendations about their evaluation for animal feeding purposes. The oxidation status (peroxide value (PV), p-Anisidine value (p-AnV), % polymeric compounds (POL)), the oxidative stability (induction time by the Rancimat at 120 °C (IT)), the fatty acid composition (FA), and tocopherol and tocotrienol content of 92 AO and FAD samples from the Spanish market were analyzed. Both AO and FAD showed low PV (0.8 and 1 meq O2/kg); however, p-AnV was higher in FAD (36.4 vs. 16.4 in AO) and POL was higher in AO (2.5% vs. not detected in FAD) as a consequence of the type of refining process. The botanical origin of AO and FAD influenced FA and tocol composition, and they influenced IT. A high variability was observed for most analyzed parameters, reinforcing the need for standardizing AO and FAD to obtain reliable feed ingredients and to include primary and secondary oxidative parameters within their quality control.

Composition and Nutritional Value of Acid Oils and Fatty Acid Distillates Used in Animal Feeding.

Acid oils (AO) and fatty acid distillates (FAD) are oil refining by-products rich in free fatty acids. The objective of this study is their characterization and the identification of their sources of variability so that they can be standardized to improve their use as feed ingredients. Samples (n=92) were collected from the Spanish market and the MIU value (sum of moisture, insoluble impurities, and unsaponifiable matter), lipid classes, fatty acid composition, and tocol content were analyzed. Their composition was highly variable even between batches from the same producer. As FAD originated from a distillation step, they showed higher free fatty acid amounts (82.5 vs 57.0 g/100 g, median values), whereas AO maintained higher proportions of moisture, polymers, tri-, di-, and monoacylglycerols. Overall, the MIU value was higher in AO (2.60-18.50 g/100 g in AO vs 0.63-10.44 g/100 g in FAD), with most of the contents of insoluble impurities being higher than those in the guidelines. Tocol and fatty acid composition were influenced by the crude oil's botanical origin. The calculated dietary energy values were, in general, higher for AO and decreased when a MIU correction factor was applied. The analytical control and standardization of these by-products is of the outmost importance to revalorize them as feed ingredients.

Methods to determine the quality of acid oils and fatty acid distillates used in animal feeding.

Acid oils and fatty acid distillates are by-products from the refining of edible oils and fats. They are used as feed ingredients, but their highly variable composition sometimes affects the productive parameters of the animals. Thus, their quality control and standardization are necessary. The official methods recommended for crude and refined fats and oils must be modified to give reliable results when applied to acid oils and fatty acid distillates. This article summarizes the drawbacks that were encountered during the setup of the analytical methods and how were they overcome by adapting the methods to these type of fat samples. Some methods such as the determinations of fatty acid composition, tocopherol and tocotrienol content, unsaponifiable matter, acidity and peroxide value had to be minimally adapted. However, others such as the determinations of moisture and volatile matter, insoluble impurities, lipid classes and p-anisidine value showed important drawbacks that required a more significant adaptation.•All the analytical methods have been successfully applied to acid oils and fatty acid distillates.•A detailed description of the sample preparation for analysis and applied analytical methods is provided as a compendium of methods in the supplementary material.•These methods will be extremely useful to improve the quality control of these heterogeneous feed ingredients.

Data on combustion chamber measurements of a diesel engine fuelled with biodiesel of jatropha curcas and fatty acid distillates.

Data in this paper covers in-cylinder pressure and volume, crank angle degrees as time magnitude, first derivate of in-cylinder pressure, admission pressure and injection pressure in a diesel engine fuelled with biodiesel. This data brings additional information such as ignition delay and rate of heat released. As condensed information, some graphs were obtained and are into the database such as in-cylinder vs. CAD, first derivate of in-cylinder pressure vs. CAD and ROHR vs. CAD. The data shows the measurements of the cylinder pressure behaviour of biodiesel from two different sources, which are both of interest of bioenergy industry at local scenarios (Jatropha curcas and Fatty Acid Distillates). Data in the paper are shown in Tables and Graphs. Through this data, a more accurate approach to engines performance and combustion can be reach, enhancing combustion efficiency and understanding of differences with standard diesel fuel.