Improvement in ORR Durability of Fe Single-Atom Carbon Catalysts Hybridized with CeO2 Nanozyme.

FeNC catalysts are considered one of the most promising alternatives to platinum group metals for the oxygen reduction reaction (ORR). Despite the extensive research on improving ORR activity, the undesirable durability of FeNC is still a critical issue for its practical application. Herein, inspired by the antioxidant mechanism of natural enzymes, CeO2 nanozymes featuring catalase-like and superoxide dismutase-like activities were coupled with FeNC to mitigate the attack of reactive oxygen species (ROS) for improving durability. Benefiting from the multienzyme-like activities of CeO2, ROS generated from FeNC is instantaneously eliminated to alleviate the corrosion of carbon and demetallization of metal sites. Consequently, FeNC/CeO2 exhibits better ORR durability with a decay of only 5 mV compared to FeNC (18 mV) in neutral electrolyte after 10k cycles. The FeNC/CeO2-based zinc-air battery also shows minimal voltage decay over 140 h in galvanostatic discharge-charge cycling tests, outperforming FeNC and commercial Pt/C.

Simultaneously Geometrical and Electronic Modulation of L10-PtZn by Trace Ge Boosts High-performance Oxygen Reduction Reaction.

Developing a highly active, durable, and low-platinum-based electrocatalyst for the cathodic oxygen reduction reaction (ORR) is for breaking the bottleneck of large-scale applications of proton exchange membrane fuel cells (PEMFCs). Herein, ultrafine PtZn intermetallic nanoparticles with low Pt-loading and trace germanium (Ge) involvement confined in the nitrogen-doped porous carbon (Ge-L10-PtZn@N-C) are reported. The Ge-L10-PtZn@N-C exhibit superior ORR activity with a mass activity of 3.04 A mg-1 Pt and specific activity of 4.69 mA cm-2, ≈12.2- and 10.2-times improvement compared to the commercial Pt/C (20%) at 0.90 V in 0.1 m KOH. The cathodic catalyst Ge-L10-PtZn@N-C assembled in the PEMFC shows encouraging peak power densities of 316.5 (at 0.86 V) and 417.2 mW cm-2 (at 0.91 V) in alkaline and acidic fuel-cell, respectively. The combination of experiment and density functional theory calculations (DFT) results robustly reveal that the participation of trace Ge can not only trigger a "growth site locking effect" to effectively inhibit nanoparticle growth, bring miniature nanoparticles, enhance dispersion uniformity, and achieve the exposure of the more electrochemical active site, but also effectively modulates the electronic structure, hence optimizing the adsorption/desorption of the oxygen intermediates.

Bioproduction of cerium-bearing magnetite and application to improve carbon-black supported platinum catalysts.

BACKGROUND: Biogeochemical processing of metals including the fabrication of novel nanomaterials from metal contaminated waste streams by microbial cells is an area of intense interest in the environmental sciences. RESULTS: Here we focus on the fate of Ce during the microbial reduction of a suite of Ce-bearing ferrihydrites with between 0.2 and 4.2 mol% Ce. Cerium K-edge X-ray absorption near edge structure (XANES) analyses showed that trivalent and tetravalent cerium co-existed, with a higher proportion of tetravalent cerium observed with increasing Ce-bearing of the ferrihydrite. The subsurface metal-reducing bacterium Geobacter sulfurreducens was used to bioreduce Ce-bearing ferrihydrite, and with 0.2 mol% and 0.5 mol% Ce, an Fe(II)-bearing mineral, magnetite (Fe(II)(III)2O4), formed alongside a small amount of goethite (FeOOH). At higher Ce-doping (1.4 mol% and 4.2 mol%) Fe(III) bioreduction was inhibited and goethite dominated the final products. During microbial Fe(III) reduction Ce was not released to solution, suggesting Ce remained associated with the Fe minerals during redox cycling, even at high Ce loadings. In addition, Fe L2,3 X-ray magnetic circular dichroism (XMCD) analyses suggested that Ce partially incorporated into the Fe(III) crystallographic sites in the magnetite. The use of Ce-bearing biomagnetite prepared in this study was tested for hydrogen fuel cell catalyst applications. Platinum/carbon black electrodes were fabricated, containing 10% biomagnetite with 0.2 mol% Ce in the catalyst. The addition of bioreduced Ce-magnetite improved the electrode durability when compared to a normal Pt/CB catalyst. CONCLUSION: Different concentrations of Ce can inhibit the bioreduction of Fe(III) minerals, resulting in the formation of different bioreduction products. Bioprocessing of Fe-minerals to form Ce-containing magnetite (potentially from waste sources) offers a sustainable route to the production of fuel cell catalysts with improved performance.

Unveiling the Dynamic Evolution of Catalytic Sites in N-Doped Leaf-like Carbon Frames Embedded with Co Particles for Rechargeable Zn-Air Batteries.

The advancement of cost-effective, high-performance catalysts for both electrochemical oxygen reduction reactions (ORRs) and oxygen evolution reactions (OERs) is crucial for the widespread implementation of metal-air batteries. In this research, we fabricated leaf-like N-doped carbon frames embedded with Co nanoparticles by pyrolyzing a ZIF-L/carbon nanofiber (ZIF-L/CNF) composite. Consequently, the optimized ZIF-L/CNF-700 catalyst exhibit exceptional catalytic activities in both ORRs and OERs, comparable to the benchmark 20 wt% Pt/C and RuO2. Addressing the issue of diminished cycle performance in the Zn-air battery cycle process, further detailed investigations into the post-electrolytic composition reveal that both the carbon framework and Co nanoparticles undergo partial oxidation during both OERs and ORRs. Owing to the varying local pH on the catalyst surface due to the consumption and generation of OH- by OERs and ORRs, after OERs, the product is reduced-size Co particles, while after ORRs, the product is outer-layer Co(OH)2-enveloping Co particles.

Highly Efficient Acidic Electrosynthesis of Hydrogen Peroxide at Industrial-Level Current Densities Promoted by Alkali Metal Cations.

Acidic H2O2 synthesis through electrocatalytic 2e- oxygen reduction presents a sustainable alternative to the energy-intensive anthraquinone oxidation technology. Nevertheless, acidic H2O2 electrosynthesis suffers from low H2O2 Faradaic efficiencies primarily due to the competing reactions of 4e- oxygen reduction to H2O and hydrogen evolution in environments with high H+ concentrations. Here, we demonstrate the significant effect of alkali metal cations, acting as competing ions with H+, in promoting acidic H2O2 electrosynthesis at industrial-level currents, resulting in an effective current densities of 50-421 mA cm-2 with 84-100 % Faradaic efficiency and a production rate of 856-7842 µmol cm-2 h-1 that far exceeds the performance observed in pure acidic electrolytes or low-current electrolysis. Finite-element simulations indicate that high interfacial pH near the electrode surface formed at high currents is crucial for activating the promotional effect of K+. In situ attenuated total reflection Fourier transform infrared spectroscopy and ab initio molecular dynamics simulations reveal the central role of alkali metal cations in stabilizing the key *OOH intermediate to suppress 4e- oxygen reduction through interacting with coordinated H2O.

Linking Enhanced Kinetics of Electrocatalytic Oxygen Reduction Reaction with Increased Utilization of Active Sites in a Hierarchical Single-Atom Catalyst.

Single-atom catalysts (SACs) are of tremendous current research due to maximized use of metal atoms and enhanced activity and selectivity for a great variety of chemical reactions. Hierarchically structured SACs have been explored to further increase the number and accessibility of active sites to realize the full potentials of SACs. However, though plausible-sounding, these supposed advantages of hierarchically structured SACs are largely untested. The assumed enhancing effects on the formation of intermediates on and the overall reaction kinetics remain largely unknown. Herein is reported a Fe-SAC with a hierarchical hollow structure (Fe/HH) that showed excellent activity in oxygen reduction reaction and proton exchange membrane fuel cell. Comparative experimental and computational studies with respect to Fe/SS-the counterpart of Fe/HH with a compact primary structure-reveal a significantly increased number of active sites and their utilization in Fe/HH as reflected by the facilitated formation of the rate-determining-step intermediate Fe-OOH*. This work thus establishes unambiguously the connection between the increased utilization of active sites and the enhanced kinetics of the electrocatalytic reduction of oxygen.

Advances in Spin Catalysts for Oxygen Evolution and Reduction Reactions.

Searching for high effective catalysts has been an endless effort to improve the efficiency of green energy harvesting and degradation of pollutants. In the past decades, tremendous strategies are explored to achieve high effective catalysts, and various theoretical understandings are proposed for the improved activity. As the catalytic reaction occurs at the surface or edge, the unsaturated ions may lead to the fluctuation of spin. Meanwhile, transition metals in catalysts have diverse spin states and may yield the spin effects. Therefore, the role of spin or magnetic moment should be carefully examined. In this review, the recent development of spin catalysts is discussed to give an insightful view on the origins for the improved catalytic activity. First, a brief introduction on the applications and advances in spin-related catalytic phenomena, is given, and then the fundamental principles of spin catalysts and magnetic fields-radical reactions are introduced in the second part. The spin-related catalytic performance reported in oxygen evolution/reduction reaction (OER/ORR) is systematically discussed in the third part, and general rules are summarized accordingly. Finally, the challenges and perspectives are given. This review may provide an insightful understanding of the microscopic mechanisms of catalytic phenomena and guide the design of spin-related catalysts.

Activating Single-Atom Ni Site via First-Shell Si Modulation Boosts Oxygen Reduction Reaction.

Atomically dispersed nitrogen-coordinated 3d transition-metal site on carbon support (M-NC) are promising alternatives to Pt group metal-based catalysts toward oxygen reduction reaction (ORR). However, despite the excellent activities of most of M-NC catalysts, such as Fe-NC, Co-NC et al., their durability is far from satisfactory due to Fenton reaction. Herein, this work reports a novel Si-doped Ni-NC catalyst (Ni-SiNC) that possesses high activity and excellent stability. X-ray absorption fine structure and aberration-corrected transmission electron microscopy uncover that the single-atom Ni site is coordinated with one Si atom and three N atoms, constructing Ni-Si1 N3  moiety. The Ni-SiNC catalyst exhibits a half-wave potential (E1/2 ) of 0.866 V versus RHE, with a distinguished long-term durability in alkaline media of only 10 mV negative shift in E1/2  after 35 000 cycles, which is also validated in Zn-air battery. Density functional theory calculations reveal that the Ni-Si1 N3  moiety facilitates ORR kinetics through optimizing the adsorption of intermediates.

P-Orbital Bismuth Single-Atom Catalyst for Highly Effective Oxygen Electroreduction in Quasi-Solid Zinc-Air Batteries.

P-block metals have gradually been utilized to synthesize non-noble-metal catalysts for oxygen reduction reaction (ORR) due to the easily tunable localized p-orbitals and resulted versatile electronic structures. The high-density single-atom bismuth sites (Bi-NC) anchored onto nitrogen-doped three-dimensional porous carbon are proved to possess significant electrocatalytic ORR performance. Theoretical calculations unveil positively charged bismuth centers prominently improved the adsorption capacity of N-doped carbon to O2 . The p orbitals of Bi sites within Bi-NC easily generate hybrid states with p orbitals of O2 , thus promoting charge transfer and ultimately reducing the energy barrier of ORR. Benefiting from p-orbital electrons regulation of bismuth atoms, Bi-NC exhibit ORR half-wave potential of 0.86 V (vs RHE). Additionally, both liquid and quasi-solid zinc-air batteries with Bi-NC as air-cathodes achieve higher power density and specific capacity than 20 wt% Pt/C, and comparable stability and round-trip efficiency with 20 wt% Pt/C. The discovery sheds light on the theoretical and practical guidance for p-block metallic single-atom catalysts.

Tuning the Coordination Microenvironment of Central Fe Active Site to Boost Water Electrolysis and Oxygen Reduction Activity.

In heterogeneous catalysis, single-atom catalysts are the frontier and important prototypes for many reactions, and revealing the intrinsic structure-activity relationship is presently a critical task, but remains challenging. In this work, water electrolysis and oxygen reduction performances of FeXYi N3 -i (X, Y = B, C, O, P and S; i = 0, 1) moiety in Fe-porphyrin are studied by the first-principles calculations, aiming at unraveling how and why tuning the coordination microenvironment of the active metal atom can improve the activity. It can be concluded that breaking the coordination shell symmetry breaks the well-accepted standard scaling relationship, adjusts *O adsorption behavior and thus optimizes the oxygen evolution reaction (OER) activity, for example, to an extremely low overpotential of 0.17 V. In combination with the Fe atom spin configuration and ligand field theory, the dramatically improved OER activity can be well explained. In the present work, the significance of the coordination microenvironment of central metal atom in studies of electrocatalysis is highlighted.

Heteroatom Coordination Regulates Iron Single-Atom-Catalyst with Superior Oxygen Reduction Reaction Performance for Aqueous Zn-Air Battery.

Platinum group metal (PGM)-free M-N-C catalysts have exhibited dramatic electrocatalytic performance and are considered the most promising candidate of the Pt catalysts in oxygen reduction reaction (ORR). However, the electrocatalytic performance of the M-N-C catalysts is still limited by their inferior intrinsic activity and finite active site density. Regulating the coordination environment and increasing the pore structure of the catalyst is an effective strategy to enhance the electrocatalytic performance of the M-N-C catalysts. In this work, the coordination environment and pore structure exquisitely regulated Fe-N-C catalyst exhibit excellent ORR activity and durability. With the enhanced intrinsic activity and increased active site density, the optimized Fe-N/S-C catalyst shows impressive ORR activity (E1/2  = 0.904 V vs reversible hydrogen electrode (RHE)) and superior long-term durability in an alkaline medium. As the advanced physical characterization and theoretical chemistry methods illustrate, the S-modified Fe-Nx (Fe-N3 /S-C) moiety is confirmed as the improved active center for ORR, and the increased active site density further improved ORR efficiency. Based on the Fe-N/S-C cathode, a Zn-air battery is fabricated and shows superior power density (315.4 mW cm-2 ) and long-term discharge stability at 20 mA cm-2 . This work would open a new perspective to design atomically dispersed iron-metal site catalysts for advanced electro-catalysis.

Lattice Distortion and H-passivation in Pure Carbon Electrocatalysts for Efficient and Stable Two-electron Oxygen Reduction to H2 O2.

The exploration of inexpensive and efficient catalysts for oxygen reduction reaction (ORR) is crucial for chemical and energy industries. Carbon materials have been proved promising with different catalysts enabling 2 and 4e- ORR. Nevertheless, their ORR activity and selectivity is still complex and under debate in many cases. Many structures of these active carbon materials are also chemically unstable for practical implementations. Unlike the well-discussed structures, this work presents a strategy to promote efficient and stable 2e- ORR of carbon materials through the synergistic effect of lattice distortion and H-passivation (on the distorted structure). We show how these structures can be formed on carbon cloth, and how the reproducible chemical adsorption can be realized on these structures for efficient and stable H2 O2 production. The work here gives not only new understandings on the 2e- ORR catalysis, but also the robust catalyst which can be directly used in industry.

Bioinspired Single-Atom Sites Enable Efficient Oxygen Activation for Switching Anodic/Cathodic Electrochemiluminescence.

Exploring advanced co-reaction accelerators with superior oxygen reduction activity that generate rich reactive oxygen species (ROS) has attracted great attention in boosting luminol-O2 electrochemiluminescence (ECL). However, tuning accelerators for efficient and selective catalytic O2 activation to switch anodic/cathodic ECL is very challenging. Herein, we report that enzyme-inspired Fe-based single-atom catalysts with axial N/C coordination structures (FeN5 , FeN4 © SACs) can generate specific ROS for cathodic/anodic ECL conversion. Mechanistic studies reveal that FeN5 sites prefer to produce highly active hydroxyl radicals and afford direct cathodic luminescence by promoting the cleavage of O-O bonds through N-induced electron redistribution. In contrast, FeN4 © sites tend to produce superoxide radicals, resulting in inefficient anodic ECL. Benefiting from the enhanced cathodic ECL, FeN5 SAC-based immunosensor was constructed for the sensitive detection of cancer biomarkers.

Boosting Electrocatalytic Activity of Single Atom Catalysts Supported on Nitrogen-Doped Carbon through N Coordination Environment Engineering.

Nonprecious group metal (NPGM)-based single atom catalysts (SACs) hold a great potential in electrocatalysis and dopant engineering has been extensively exploited to boost their catalytic activity, while the coordination environment of dopant, which also significantly affects the electronic structure of SACs, and consequently their electrocatalytic performance, have been largely ignored. Here, by adopting a precursor modulation strategy, the authors successfully synthesize single cobalt atom catalysts embedded in nitrogen-doped carbon, Co-N/C, with similar overall Co and N concentrations but different N types, that is, pyridinic N (NP ), graphitic N (NG ), and pyrrolic N (NPY ). Co-N/C with the Co-N4 moieties coordinated with NG displays far superior activity for oxygen reduction (ORR) and evolution reactions, and superior activity and stability in both zinc-air batteries and proton exchange membrane fuel cells. Density functional theory calculation indicates that coordinated N species in particular NG functions as electron donors to the Co core of Co-N4 active sites, leading to the downshift of d-band center of Co-N4 and weakening the binding energies of the intermediates on Co-N4 sites, thus, significantly promoting catalytic kinetics and thermodynamics for ORR in a full pH range condition.

Applications of Nanomaterials in Microbial Fuel Cells: A Review.

Microbial fuel cells (MFCs) are an environmentally friendly technology and a source of renewable energy. It is used to generate electrical energy from organic waste using bacteria, which is an effective technology in wastewater treatment. The anode and the cathode electrodes and proton exchange membranes (PEM) are important components affecting the performance and operation of MFC. Conventional materials used in the manufacture of electrodes and membranes are insufficient to improve the efficiency of MFC. The use of nanomaterials in the manufacture of the anode had a prominent effect in improving the performance in terms of increasing the surface area, increasing the transfer of electrons from the anode to the cathode, biocompatibility, and biofilm formation and improving the oxidation reactions of organic waste using bacteria. The use of nanomaterials in the manufacture of the cathode also showed the improvement of cathode reactions or oxygen reduction reactions (ORR). The PEM has a prominent role in separating the anode and the cathode in the MFC, transferring protons from the anode chamber to the cathode chamber while preventing the transfer of oxygen. Nanomaterials have been used in the manufacture of membrane components, which led to improving the chemical and physical properties of the membranes and increasing the transfer rates of protons, thus improving the performance and efficiency of MFC in generating electrical energy and improving wastewater treatment.

Hydrogen Evolution and Oxygen Reduction Reactions in Acidic Media Catalyzed by Pd4 S Decorated N/S Doped Carbon Derived from Pd Coordination Polymer.

The template-free synthesis and the characterization of an active electrocatalyst are performed for both the hydrogen evolution and oxygen reduction reactions in acidic media. In this work, the unique chelation mode of benzene-1,4-dithiocarboxamide (BDCA) is first used to synthesize a novel palladium-BDCA coordination polymer (PdBDCA) as a precursor of palladium sulfide nanoparticles-decorated nitrogen and sulfur doped carbon (Pd4 S-SNC). The newly synthesized PdBDCA and Pd4 S-SNC nanoparticles are characterized using chemical, electrochemical, and surface analysis methods. Notably, the nanoparticles obtained at 700 °C exhibit the remarkable catalytic property for the hydrogen evolution reaction in 0.5 m H2 SO4 , showing the overpotential of 32 mV (vs reversible hydrogen electrode (RHE)) and Tafel slope of 52 mV dec-1 , which are comparable to that of Pt/C. The catalyst also shows a high oxygen reduction activity, offering the half-wave and onset potentials of 0.92 and 0.77 V (vs RHE) in 0.5 m H2 SO4 , with improved methanol tolerance and long-term stability compared with Pt/C. The present study gives a way for the design of excellent electrocatalyst for the energy conversion devices in the corrosive acidic environment.

Structural Modulation on NiCo2 S4 Nanoarray by N Doping to Enhance 2e-ORR Selectivity for Photothermal AOPs and Zn-O2 Batteries*.

As a H2 O2 generator, a 2e- oxygen reduction reaction active electrocatalyst plays an important role in the advanced oxidation process to degrade organic pollutants in sewage. To enhance the tendency of NiCo2 S4 towards the 2e- reduction reaction, N atoms are doped in its structure and replace S2- . The result implies that this weakens the interaction between NiCo2 S4 and OOH*, suppresses O-O bond breaking and enhances H2 O2 selectivity. This electrocatalyst also shows photothermal effect. Under photothermal heating, H2 O2 produced by the oxidation reduction reaction can decompose and releaseOH, which degrades organic pollutants through the advanced oxidation process. Photothermal effect induced by the advance oxidation process shows obvious advantages over the traditional Fenton reaction, such as wide pH adaptation scope and low secondary pollutant due to its Fe2+ free character. With Zn as anode and the electrocatalyst as cathode material, a Zn-O2 battery is assembled. It achieves electricity generation and photothermal effect induced by the advance oxidation process simultaneously.

Bimetallic Covalent Organic Frameworks for Constructing Multifunctional Electrocatalyst.

Covalent organic frameworks (COFs) are a new class of crystalline porous polymers comprised mainly of carbon atoms, and are versatile for the integration of heteroatoms such as B, O, and N into the skeletons. The designable structure and abundant composition render COFs useful as precursors for heteroatom-doped porous carbons for energy storage and conversion. Herein, we describe a multifunctional electrochemical catalyst obtained through pyrolysis of a bimetallic COF. The catalyst possesses hierarchical pores and abundant iron and cobalt nanoparticles embedded with standing carbon layers. By integrating these features, the catalyst exhibits excellent electrochemical catalytic activity in the oxygen reduction reaction (ORR), with a 50 mV positive half-wave potential, a higher limited diffusion current density, and a much smaller Tafel slope than a Pt-C catalyst. Moreover, the catalyst displays superior electrochemical performance toward the hydrogen evolution reaction (HER), with overpotentials of -0.26 V and -0.33 V in acidic and alkaline aqueous solution, respectively, at a current density of 10 mA cm-2 . The overpotential in the catalysis of the oxygen evolution reaction (OER) was 1.59 V at the same current density.

Remarkable differences in the voltammetric response towards hydrogen peroxide, oxygen and Ru(NH3)63+ of electrode interfaces modified with HF or LiF-HCl etched Ti3C2Tx MXene.

An electrochemical study was performed on the behavior of Ti3C2Tx MXenes prepared by using either HF (MXene1) or LiF/HCl as etchants (MXene2). The use of two redox probes indicates the presence of a higher negative charge density on MXene2 in comparison to MXene1. The characterization of two nanomaterials shows that titanium and fluoride are present higher by one order of magnitude at the interface of MXene2, compared to MXene1. The high Ti and F content is accompanied by a 82-fold larger (249 µA·cm-2 vs. 5.64 µA·cm-2) anodic peak at the peak potential near 0.4 V (vs. Ag/AgCl). Similarly, the peak current on MXene2 is 317-fold higher for the oxygen reduction at pH 7.0 (at a voltage of -0.84 V) and 215-fold higher for the reduction of H2O2 at -0.89 V, when compared to MXene1. Graphical abstractDifference in electrochemical behavior of MXene prepared by HF (MXene1) and LiF/HCl (MXene2) as etchants.

Ni-Fe Nitride Nanoplates on Nitrogen-Doped Graphene as a Synergistic Catalyst for Reversible Oxygen Evolution Reaction and Rechargeable Zn-Air Battery.

Obtaining bifunctional electrocatalysts with high activity for the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is a main hurdle in the application of rechargeable metal-air batteries. Earth-abundant 3d transition metal-based catalysts have been developed for the OER and ORR; however, most of these are based on oxides, whose insulating nature strongly restricts their catalytic performance. This study describes a metallic Ni-Fe nitride/nitrogen-doped graphene hybrid in which 2D Ni-Fe nitride nanoplates are strongly coupled with the graphene support. Electronic structure of the Ni-Fe nitride is changed by hybridizing with the nitrogen-doped graphene. The unique heterostructure of this hybrid catalyst results in very high OER activity with the lowest onset overpotential (150 mV) reported, and good ORR activity comparable to that for commercial Pt/C. The high activity and durability of this bifunctional catalyst are also confirmed in rechargeable zinc-air batteries that are stable for 180 cycles with an overall overpotential of only 0.77 V at 10 mA-2 .