Intrinsic ankle stiffness is associated with paradoxical calf muscle movement but not postural sway or age.

Due to Achilles tendon compliance, passive ankle stiffness is insufficient to stabilise the body when standing. This results in 'paradoxical' muscle movement, whereby calf muscles tend to shorten during forward body sway. Natural variation in stiffness may affect this movement. This may have consequences for postural control, with compliant ankles placing greater reliance upon active neural control rather than stretch reflexes. Previous research also suggests ageing reduces ankle stiffness, possibly contributing to reduced postural stability. Here we determine the relationship between ankle stiffness and calf muscle movement during standing, and whether this is associated with postural stability or age. Passive ankle stiffness was measured during quiet stance in 40 healthy volunteers ranging from 18 to 88 years of age. Medial gastrocnemius muscle length was also recorded using ultrasound. We found a significant inverse relationship between ankle stiffness and paradoxical muscle movement, that is, more compliant ankles were associated with greater muscle shortening during forward sway (r ≥ 0.33). This was seen during both quiet stance as well as voluntary sway. However, we found no significant effects of age upon stiffness, paradoxical motion or postural sway. Furthermore, neither paradoxical muscle motion nor ankle stiffness was associated with postural sway. These results show that natural variation in ankle stiffness alters the extent of paradoxical calf muscle movement during stance. However, the absence of a clear relationship to postural sway suggests that neural control mechanisms are more than capable of compensating for a lack of inherent joint stiffness.

The topographical attenuation of cutaneous input is modulated at the ankle joint during gait.

The attenuation of sensory inputs via various methods has been demonstrated to impair balance control and alter locomotor behavior during human walking; however, the effects of attenuating foot sole sensation under distinct areas of the foot sole on lower extremity motor output remains poorly understood. Thus, the purpose of this study was to attenuate cutaneous feedback via regional hypothermia under five different areas of the foot sole and investigate the resultant modulation of kinematic and muscle activity during level walking. Electromyography from eight lower leg muscles, kinematics, and location of center of pressure was recorded from 48 healthy young adults completing walking trials with normal and reduced cutaneous sensation from bilateral foot soles. The results of this study highlight the modulatory response of the tibialis anterior in terminal stance (propulsion and toe-off) and medial gastrocnemius muscle throughout the entire stance phase of gait. The topographical organization of foot sole skin in response to the attenuation of cutaneous feedback from different areas of the foot sole significantly modified locomotor activity. Furthermore, the locomotor response to cutaneous attenuation under the same regions that we previously facilitated with tactile feedback do not oppose each other, suggesting different physiological changes to foot sole skin generate unique gait behaviors.

Controlling flat-foot limit cycle walkers with compliant joints based on local stability variation.

This study investigates local stability of a four-link limit cycle walking biped with flat feet and compliant ankle joints. Local stability represents the behavior along the solution trajectory between Poincare sections, which can provide detailed information about the evolution of disturbances. The effects of ankle stiffness and foot structure on local stability are studied. In addition, we apply a control strategy based on local stability analysis to the limit cycle walker. Control is applied only in the phases with poor local stability. Simulation results show that the energy consumption is reduced without sacrificing disturbance rejection ability. This study may be helpful in motion control of limit cycle bipedal walking robots with flat feet and ankle stiffness and understanding of human walking principles.

Anticipation of landing leg masks ankle inversion orientation deficits and peroneal insufficiency during jump landing in people with chronic ankle instability.

Ankle inversion orientation and peroneal activation insufficiency may contribute to lateral ankle sprains during landing in chronic ankle instability (CAI); however, how anticipation alters these factors is neglected. This study aimed to assess the impact of anticipation on joint orientation and muscle activity during landing in individuals with CAI. Fifteen participants with CAI and 15 healthy participants (control) were recruited to perform single-leg landings after bilateral countermovement jumps when the landing limb was specified before (planned) or after (unplanned) take-off. Joint angle (hip, knee, and ankle) and electromyography (gluteus medius, rectus femoris, biceps femoris, gastrocnemius lateral head, tibialis anterior, and peroneal longus) were collected and analyzed with 2 (groups) × 2 (conditions) statistical parametric mapping ANOVA. In the unplanned condition, the CAI group demonstrated a less plantarflexed (maximum difference [MD] = 9.5°, p = 0.047) and more inverted ankle joint (MD = 4.1°, p < 0.001) before ground contact, along with lower peroneal activity at ground contact compared to the control group (MD = 28.9% of peak activation, p < 0.001). No significant differences between groups were observed in the planned condition. In conclusion, anticipation may mask jump landing deficits in people with CAI, including inverted ankle orientation and reduced peroneus longus activity pre- and post-landing, which were observed exclusively in unplanned landings. Clinicians and researchers need to recognize the impact of anticipation on apparent landing deficits and consider the implications for injury prevention and rehabilitation strategies.

Acute effect of static stretching on non-muscular tissue stiffness and joint flexibility: a comparative study between older and young men.

PURPOSE: Non-muscular tissue stiffness is assumed to have a negative impact on joint flexibility, and a reduction in non-muscular tissue stiffness may be important, especially in older adults. The present study aimed to compare the acute effects of static stretching on non-muscular tissue stiffness between older and young adults and to investigate whether a decrease in tissue stiffness improves joint flexibility. METHODS: Twenty older (62-83 years) and 20 young (21-24 years) males participated. Ankle dorsiflexion static stretching (five sets of 90 s each) was performed, and before and after stretching, the ankle dorsiflexion range of motion (RoM), passive ankle joint stiffness, and shear wave speed (SWS) (an index of stiffness) of the sciatic nerve, tibial nerve, and posterior thigh fascia were measured. RESULTS: Stretching led to an increase in RoM and a decrease in passive joint stiffness in both groups (P < 0.001) with no significant between-group differences (P ≥ 0.055). The between-group difference in the effect of stretching on SWS was evident only for the sciatic nerve, and a decline in sciatic nerve SWS was only observed in the older adult group (pre-stretching: 2.5 ± 0.3 m/s; post-stretching: 2.3 ± 0.4 m/s; P = 0.027). A significant positive repeated-measures correlation was observed between the sciatic nerve SWS and passive joint stiffness (P = 0.014, rrm = 0.540). CONCLUSION: The reduction in sciatic nerve stiffness by stretching was noticeable in older men and led to improved joint flexibility. These findings may provide insight into tissue adaptation by stretching and may be used to explore effective exercises for improving joint flexibility in older adults.

Changes in Dynamic Mean Ankle Moment Arm in Unimpaired Walking Across Speeds, Ramps, and Stairs.

Understanding the natural biomechanics of walking at different speeds and activities is crucial to develop effective assistive devices for persons with lower-limb impairments. While continuous measures such as joint angle and moment are well-suited for biomimetic control of robotic systems, whole-stride summary metrics are useful for describing changes across behaviors and for designing and controlling passive and semi-active devices. Dynamic mean ankle moment arm (DMAMA) is a whole-stride measure representing the moment arm of the ground reaction impulse about the ankle joint-effectively, how "forefoot-dominated" or "hindfoot-dominated" a movement is. DMAMA was developed as a target and performance metric for semi-active devices that adjust once per stride. However, for implementation in this application, DMAMA must be characterized across various activities in unimpaired individuals. In our study, unimpaired participants walked at "slow," "normal," and "fast" self-selected speeds on level ground and at a normal self-selected speed while ascending and descending stairs and a 5-degree incline ramp. DMAMA measured from these activities displayed a borderline-significant negative sensitivity to walking speed, a significant positive sensitivity to ground incline, and a significant decrease when ascending stairs compared to descending. The data suggested a nonlinear relationship between DMAMA and walking speed; half of the participants had the highest average DMAMA at their "normal" speed. Our findings suggest that DMAMA varies substantially across activities, and thus, matching DMAMA could be a valuable metric to consider when designing biomimetic assistive lower-limb devices.

EMG Analysis During Static Balance in Chronic Ankle Instability, Coper and Controls.

Patients with chronic ankle instability (CAI) consistently display postural control alterations, which may result from sensorimotor dysfunction. This study aimed to compare muscle activity in the lower extremity and postural control among individuals with CAI, copers and uninjured controls during a static balance test. A total of 57 physically active participants were categorized into three groups (CAI, copers and controls) and performed a single-leg balance test with two visual conditions: eyes open and eyes closed. Muscle activity in six lower extremity muscles and center of pressure (CoP) variables were recorded and analyzed. Patients with CAI exhibited greater muscle activity in the medial gastrocnemius and gluteus maximus compared to controls or copers, regardless of the visual condition. Copers displayed increased gluteus medius activity compared to controls. Additionally, all groups demonstrated increased muscle activity and CoP variables when visual feedback was disrupted. These findings suggest that patients with CAI may have less effective recruitment of motor units during static balance. On the other hand, greater muscle activity in the gluteus medius in copers may represent a coping mechanism to avoid further ankle injuries. Further research on muscle activity during dynamic postural control is warranted to explore sensorimotor alterations in patients with CAI.

Electromyographic Activity of Lower Limb Muscles during Ankle Destabilizing Tests.

Ankle destabilizing devices were developed to improve the recruitment of the evertor muscles. Nevertheless, the activity of lower-leg muscles has never been compared to each other during functional tests performed with destabilization. The objectives were i) to compare the electromyographic activity between the lower-leg muscles during four functional tests performed with ankle destabilization, and ii) to determine sex-related differences in neuromuscular activation. Twenty-six healthy volunteers (13 males, 13 females) performed the modified Star Excursion Balance Test (mSEBT), unipedal balance and weight-bearing inversion and eversion tests with a destabilizing device, while recording electromyographic activity of the peroneus longus and brevis, tibialis anterior, gastrocnemius lateralis and gluteus medius. The activity of peroneal muscles was significantly greater than other muscles during all functional tests. Furthermore, the anterior direction of the mSEBT was the one implying the greatest activity of the peroneus longus muscle compared to the posteromedial (p=0.003) or posterolateral (p<0.001) directions. Finally, no significant sex-related differences in neuromuscular activity were reported. This study highlights the effectiveness of the destabilizing device to involve specifically the peroneal muscles when performing various functional tests. This device should be used by clinicians to be more specific to the stabilizers of the ankle joint during functional exercises.

Assistance force-line of exosuit affects ankle multidimensional motion: a theoretical and experimental study.

BACKGROUND: The talocrural joint and the subtalar joint are the two major joints of the ankle-joint complex. The position and direction of the exosuit force line relative to these two joint axes can influence ankle motion. We aimed to understand the effects of different force-lines on ankle multidimensional motion. METHODS: In this article, three assistance force line schemes for ankle exosuits were proposed: perpendicular to the talocrural joint axis (PT), intersecting with the subtalar joint axis (IS), and parallel to the triceps surae (PTS). A theoretical model was proposed to calculate the exosuit's assistance moment. Seven participants completed four experimental tests of ankle plantarflexion, including three passive motions assisted by the PT, PTS and IS schemes, and one active motion without exosuit assistance (Active). RESULTS: The simulation results demonstrated that all three exosuits were able to produce significant moments of ankle plantarflexion. Among these, the PT scheme exhibited the highest moments in all dimensions, followed by the PTS and IS schemes. The experimental findings confirmed the effectiveness of all three exosuit schemes in assisting ankle plantarflexion. Additionally, as the assistive force lines approached the subtalar joint, there was a decrease in ankle motion assisted by the exosuits in non-plantarflexion directions, along with a reduction in the average distance of ankle angle curves relative to active ankle motion. Furthermore, the linear correlation coefficients between inversion and plantarflexion, adduction and plantarflexion, and adduction and inversion gradually converged toward active ankle plantarflexion motion. CONCLUSIONS: Our research indicates that the position of the exosuit force line to the subtalar joint has a significant impact on ankle inversion and adduction. Among all three schemes, the IS, which has the closest distance to the subtalar joint axes, has the greatest kinematic similarity to active ankle plantarflexion and might be a better choice for ankle assistance and rehabilitation.

The ankle dorsiflexion kinetics demand to increase swing phase foot-ground clearance: implications for assistive device design and energy demands.

BACKGROUND: The ankle is usually highly effective in modulating the swing foot's trajectory to ensure safe ground clearance but there are few reports of ankle kinetics and mechanical energy exchange during the gait cycle swing phase. Previous work has investigated ankle swing mechanics during normal walking but with developments in devices providing dorsiflexion assistance, it is now essential to understand the minimal kinetic requirements for increasing ankle dorsiflexion, particularly for devices employing energy harvesting or utilizing lighter and lower power energy sources or actuators. METHODS: Using a real-time treadmill-walking biofeedback technique, swing phase ankle dorsiflexion was experimentally controlled to increase foot-ground clearance by 4 cm achieved via increased ankle dorsiflexion. Swing phase ankle moments and dorsiflexor muscle forces were estimated using AnyBody modeling system. It was hypothesized that increasing foot-ground clearance by 4 cm, employing only the ankle joint, would require significantly higher dorsiflexion moments and muscle forces than a normal walking control condition. RESULTS: Results did not confirm significantly increased ankle moments with augmented dorsiflexion, with 0.02 N.m/kg at toe-off reducing to zero by the end of swing. Tibialis Anterior muscle force incremented significantly from 2 to 4 N/kg after toe-off, due to coactivation with the Soleus. To ensure an additional 4 cm mid swing foot-ground clearance, an estimated additional 0.003 Joules/kg is required to be released immediately after toe-off. CONCLUSION: This study highlights the interplay between ankle moments, muscle forces, and energy demands during swing phase ankle dorsiflexion, offering insights for the design of ankle assistive technologies. External devices do not need to deliver significantly greater ankle moments to increase ankle dorsiflexion but, they should offer higher mechanical power to provide rapid bursts of energy to facilitate quick dorsiflexion transitions before reaching Minimum Foot Clearance event. Additionally, for ankle-related bio-inspired devices incorporating artificial muscles or humanoid robots that aim to replicate natural ankle biomechanics, the inclusion of supplementary Tibialis Anterior forces is crucial due to Tibialis Anterior and Soleus co-activation. These design strategies ensures that ankle assistive technologies are both effective and aligned with the biomechanical realities of human movement.

Biomechanical Investigation of Lower Limbs during Slope Transformation Running with Different Longitudinal Bending Stiffness Shoes.

BACKGROUND: During city running or marathon races, shifts in level ground and up-and-down slopes are regularly encountered, resulting in changes in lower limb biomechanics. The longitudinal bending stiffness of the running shoe affects the running performance. PURPOSE: This research aimed to investigate the biomechanical changes in the lower limbs when transitioning from level ground to an uphill slope under different longitudinal bending stiffness (LBS) levels in running shoes. METHODS: Fifteen male amateur runners were recruited and tested while wearing three different LBS running shoes. The participants were asked to pass the force platform with their right foot at a speed of 3.3 m/s ± 0.2. Kinematics data and GRFs were collected synchronously. Each participant completed and recorded ten successful experiments per pair of shoes. RESULTS: The range of motion in the sagittal of the knee joint was reduced with the increase in the longitudinal bending stiffness. Positive work was increased in the sagittal plane of the ankle joint and reduced in the keen joint. The negative work of the knee joint increased in the sagittal plane. The positive work of the metatarsophalangeal joint in the sagittal plane increased. CONCLUSION: Transitioning from running on a level surface to running uphill, while wearing running shoes with high LBS, could lead to improved efficiency in lower limb function. However, the higher LBS of running shoes increases the energy absorption of the knee joint, potentially increasing the risk of knee injuries. Thus, amateurs should choose running shoes with optimal stiffness when running.

Research on a Calculation Model of Ankle-Joint-Torque-Based sEMG.

The purpose of this article is to establish a prediction model of joint movements and realize the prediction of joint movemenst, and the research results are of reference value for the development of the rehabilitation equipment. This will be carried out by analyzing the impact of surface electromyography (sEMG) on ankle movements and using the Hill model as a framework for calculating ankle joint torque. The table and scheme used in the experiments were based on physiological parameters obtained through the model. Data analysis was performed on ankle joint angle signal, movement signal, and sEMG data from nine subjects during dorsiflexion/flexion, varus, and internal/external rotation. The Hill model was employed to determine 16 physiological parameters which were optimized using a genetic algorithm. Three experiments were carried out to identify the optimal model to calculate torque and root mean square error. The optimized model precisely calculated torque and had a root mean square error of under 1.4 in comparison to the measured torque. Ankle movement models predict torque patterns with accuracy, thereby providing a solid theoretical basis for ankle rehabilitation control. The optimized model provides a theoretical foundation for precise ankle torque forecasts, thereby improving the efficacy of rehabilitation robots for the ankle.

The Effect of Sensor Feature Inputs on Joint Angle Prediction across Simple Movements.

The use of wearable sensors, such as inertial measurement units (IMUs), and machine learning for human intent recognition in health-related areas has grown considerably. However, there is limited research exploring how IMU quantity and placement affect human movement intent prediction (HMIP) at the joint level. The objective of this study was to analyze various combinations of IMU input signals to maximize the machine learning prediction accuracy for multiple simple movements. We trained a Random Forest algorithm to predict future joint angles across these movements using various sensor features. We hypothesized that joint angle prediction accuracy would increase with the addition of IMUs attached to adjacent body segments and that non-adjacent IMUs would not increase the prediction accuracy. The results indicated that the addition of adjacent IMUs to current joint angle inputs did not significantly increase the prediction accuracy (RMSE of 1.92° vs. 3.32° at the ankle, 8.78° vs. 12.54° at the knee, and 5.48° vs. 9.67° at the hip). Additionally, including non-adjacent IMUs did not increase the prediction accuracy (RMSE of 5.35° vs. 5.55° at the ankle, 20.29° vs. 20.71° at the knee, and 14.86° vs. 13.55° at the hip). These results demonstrated how future joint angle prediction during simple movements did not improve with the addition of IMUs alongside current joint angle inputs.

A Biomechanical Comparison Between the Safety-Squat Bar and Traditional Barbell Back Squat.

ABSTRACT: Johansson, DG, Marchetti, PH, Stecyk, SD, and Flanagan, SP. A biomechanical comparison between the safety-squat bar and traditional barbell back squat. J Strength Cond Res 38(5): 825-834, 2024-The primary objectives for this investigation were to compare the kinematic and kinetic differences between performing a parallel back squat using a traditional barbell (TB) or a safety-squat bar (SSB). Fifteen healthy, recreationally trained male subjects (23 + 4 years of age) performed the back squat with a TB and an SSB at 85% of their respective 1 repetition maximum with each barbell while instrumented for biomechanical analysis. Standard inverse dynamics techniques were used to determine joint kinematic and kinetic measures. A 2 × 3 (exercise × joint) factorial analysis of variance with repeated measures was used to determine the kinetic and kinematic differences between the squats while using the different barbells. Fisher's least significant difference post hoc comparisons showed that the TB resulted in significantly greater maximum hip flexion angle (129.33 ± 11.8° vs. 122.11 ± 12.1°; p < 0.001; d = 1.80), peak hip net joint extensor torque (2.54 ± 0.4 Nm·kg -1 vs. 2.40 ± 0.4 Nm·kg -1 ; p = 0.001; d = 1.10), hip net extensor torque mechanical energy expenditure (MEE; 2.81 ± 0.5 Nm·kg -1 vs. 2.58 ± 0.6 Nm·kg -1 ; p = 0.002; d = 0.97), and ankle net joint plantar flexor torque MEE (0.32 ± 0.09 J·kg -1 vs. 0.28 ± 0.06 J·kg -1 ; p = 0.029; d = 0.63), while also lifting significantly (123.17 ± 20.8 kg vs. 117.17 ± 20.8 kg; p = 0.005; d = 0.858) more weight than the SSB. The SSB resulted in significantly higher maximum knee flexion angles (116.82 ± 5.8° vs. 115.65 ± 5.6°; p = 0.011; d = 0.75) than the TB, with no significant difference in kinetics at the knee. The TB may be preferred to the SSB for developing the hip extensors and lifting higher maximum loads. The SSB may be advantageous in situations where a more upright posture or a lower load is preferred while creating a similar demand for the knee joint.

A Biomechanical Comparison Between a High and Low Barbell Placement on Net Joint Moments, Kinematics, Muscle Forces, and Muscle-Specific Moments in 3 Repetition Maximum Back Squats.

ABSTRACT: Larsen, S, de Zee, M, Kristiansen, EL, and van den Tillaar, R. A biomechanical comparison between a high and low barbell placement on net joint moments, kinematics, muscle forces, and muscle-specific moments in 3 repetition maximum back squats. J Strength Cond Res 38(7): 1221-1230, 2024-This study aimed to investigate the impact of a high barbell vs. low barbell placement on net joint moments, muscle forces, and muscle-specific moments in the lower extremity joints and muscles during maximum back squats. Twelve recreationally trained men (age = 25.3 ± 2.9 years, height = 1.79 ± 7.7 m, and body mass = 82.8 ± 6.9 kg) volunteered for the study. A marker-based motion capture system and force plate data were used to calculate the net joint moments, and individual muscle forces were estimated using static optimization. Muscle forces were multiplied by their corresponding internal moment arms to determine muscle-specific moments. Statistical parametric mapping was used to analyze the effect of barbell placement as time-series data during the concentric phase. The 3 repetition maximum barbell load lifted by the subjects was 129.1 ± 13.4 kg and 130.2 ± 12.7 kg in the high bar and low bar, which were not significantly different from each other. Moreover, no significant differences were observed in net joint moments, muscle forces, or muscle-specific moments for the hip, knee, or ankle joint between the low- and high bar placements. The findings of this study suggest that barbell placement plays a minor role in lower extremity muscle forces and moment-specific moments when stance width is standardized, and barbell load lifted does not differ between barbell placements among recreationally resistance-trained men during maximal back squats. Therefore, the choice of barbell placement should be based on individual preference and comfort.

Lower-Extremity Energetic Distribution During Rate-Controlled Ballet Jumps (Sautés) in Healthy Dancers.

Dancers frequently perform jumps in the context of a prolonged, continuous dance piece. The purpose of this study is to explore the lower-extremity energetics in healthy dancers performing repetitive dance jumps (sautés) before and after typical dance-specific choreography. Lower-extremity kinetic data were collected from 14 healthy female dancers during a series of sautés performed before and after 3 minutes of dance. Percent contributions of the lower-extremity joints to the whole-limb mechanical energy expenditure during ground contact were calculated. The jumps performed at the beginning were compared with the jumps at the end of the dance choreography. Dancers maintained the jump rate and consistent whole-limb mechanical energy expenditure between the jump series. As expected, for both jump series, the sautés had greater relative energetic contribution from the ankle and knee as compared with lesser contribution from the hip and toe. However, we observed lesser contribution from the knee and greater contribution from the hip after a 3-minute dance. After performing typical dance choreography, the dancers demonstrated a distal to proximal redistribution of individual joints' contribution to whole-limb mechanical energy expenditure.

The Midfoot Joint Complex (Foot Arch) Contributes to the Upper Body Position in Bipedal Walking and Coordinates With the Lower Limb Joints.

This study estimated the contribution of the midfoot joint complex (MJC) kinematics to the pelvis anterior-posterior positions during the stance phase of walking and investigated whether the MJC is functionally coordinated with the lower limb joints to maintain similar pelvic positions across steps. Hip, knee, ankle, and MJC sagittal angles were measured in 11 nondisabled participants during walking. The joints' contributions to pelvic positions were computed through equations derived from a link-segment model. Functional coordination across steps was identified when the MJC contribution to pelvic position varied and the summed contributions of other joints varied in the opposite direction (strong negative covariations [r ≤ -.7] in stance phase instants). We observed that the MJC plantarflexion (arch raising) during the midstance and late stance leads the pelvis backward, avoiding excessive forward displacement. The MJC was the second joint that contributed most to the pelvis positions (around 18% of all joints' contributions), after the ankle joint. The MJC and ankle were the joints that were most frequently coordinated with the other joints (≅70% of the stance phase duration). The findings suggest that the MJC is part of the kinematic chain that determines pelvis positions during walking and is functionally coordinated with the lower limb joints.

Does the Position of the Ankle Matter During the Single Gluteal Bridge in Futsal Players? An Electromyographic Analysis.

CONTEXT: The aim of this study was to analyze the muscle activity of the hamstring muscles and the lateral gastrocnemius during different variants of the single-leg bridge (SLB) in futsal players. DESIGN: Cross-sectional study. METHODS: Twenty-two futsal players (age = 24.8 [3.9] y) volunteered to participate in this study. The participants performed 3 variations of the SLB with the knee flexed at 45°. The first position was performed with the ankle in plantar position with flat support, the second with the ankle in dorsiflexion (DF) with heel support, and the third with the ankle in DF and external rotation (ER) with heel support. The Wilcoxon rank-sum test assessed the difference between variables for samples with the rank-biserial correlation effect size. Spearman correlation coefficients were used to examine the associations of the percentage maximal voluntary isometric contraction for each muscle with peak force and rate of force development with 3 different variances of the SLB. RESULTS: The variation of ankle DF and ER with heel support generated higher muscle activity in BF in concentric (P < .01, effect size [ES] = -0.613); isometric (P < .042, ES = -0.494); and eccentric (P < .005, ES = -0.668) contraction than ankle DF with heel support. In contrast, the variation of ankle DF and ER with heel support generated fewer muscle activity in lateral gastrocnemius in concentric (P < .001, ES = 0.779); isometric (P < .003, ES = 0.708); and eccentric (P < .014, ES = 0.589) contraction than ankle DF with heel support. CONCLUSIONS: The position of DF and ER was the best position in SLB to train the BF. It could be convenient to start rehabilitation of the BF with flat foot postition or ankle in DF with heel support and progress with the position of the ankle in DF and ER with heel support.

Acute Effects of Local High-Frequency Percussive Massage on Deep Fascial and Muscular Stiffness and Joint Range of Motion in Young Adult Men.

BACKGROUND: Local high-frequency percussive (HFP) massage has recently found widespread application in physical therapy. Although HFP massage reportedly improves range of motion (ROM), the mechanism underlying its action has not yet been proven. This study aimed to clarify whether a 5-minute percussive massage regimen affects muscular or connective tissues, such as the deep fascia and deep intermuscular fascia and the change in joint ROM. METHOD: The study sample was calculated using G*Power analysis program, and this study enrolled 15 healthy men who underwent 5-minute HFP massage to the medial gastrocnemius muscle. Shear-wave elastography was used to measure tissue stiffness in the deep fascia, muscle, and deep intermuscular fascia through shear-wave velocity as well as the ROM of the volunteers' ankle joint dorsiflexion before and after the HFP massage. A value of P < .05 was used to declare statistical significance, and post hoc was used to calculate the effect size using G*Power. RESULTS: Shear-wave velocity revealed a significant change in the deep fascia (P = .003; shear-wave velocity: -0.7 m/s) and significant increase in ROM of ankle dorsiflexion (P = .002; increase in ROM: 3.0°) after 5 minutes of HFP massage. However, the muscle and deep intermuscular fascia did not exhibit any significant changes. CONCLUSIONS: HFP massage for 5 minutes modified the stiffness of the deep fascia and concurrently improved the ankle joint-dorsiflexion ROM. This method can be used as an intervention to decrease stiffness of the deep fascia and increase the ROM efficiently.

Two motor neuron synergies, invariant across ankle joint angles, activate the triceps surae during plantarflexion.

Recent studies have suggested that the nervous system generates movements by controlling groups of motor neurons (synergies) that do not always align with muscle anatomy. In this study, we determined whether these synergies are robust across tasks with different mechanical constraints. We identified motor neuron synergies using principal component analysis (PCA) and cross-correlations between smoothed discharge rates of motor neurons. In part 1, we used simulations to validate these methods. The results suggested that PCA can accurately identify the number of common inputs and their distribution across active motor neurons. Moreover, the results confirmed that cross-correlation can separate pairs of motor neurons that receive common inputs from those that do not receive common inputs. In part 2, 16 individuals performed plantarflexion at three ankle angles while we recorded EMG signals from the gastrocnemius lateralis (GL) and medialis (GM) and the soleus (SOL) with grids of surface electrodes. The PCA revealed two motor neuron synergies. These motor neuron synergies were relatively stable, with no significant differences in the distribution of motor neuron weights across ankle angles (P = 0.62). When the cross-correlation was calculated for pairs of motor units tracked across ankle angles, we observed that only 13.0% of pairs of motor units from GL and GM exhibited significant correlations of their smoothed discharge rates across angles, confirming the low level of common inputs between these muscles. Overall, these results highlight the modularity of movement control at the motor neuron level, suggesting a sensible reduction of computational resources for movement control. KEY POINTS: The CNS might generate movements by activating groups of motor neurons (synergies) with common inputs. We show here that two main sources of common inputs drive the motor neurons innervating the triceps surae muscles during isometric ankle plantarflexions. We report that the distribution of these common inputs is globally invariant despite changing the mechanical constraints of the tasks, i.e. the ankle angle. These results suggest the functional relevance of the modular organization of the CNS to control movements.