Effect of final irrigation protocols with chitosan nanoparticle and genipin on dentine against collagenase degradation: An ex-vivo study.

AIM: Endodontic irrigants may affect the mechanical and chemical properties of dentine. This study evaluated the effects of various final irrigation protocols including the use of chitosan nanoparticle (CSnp) and cross-linking with genipin on the (1) mechanical and (2) chemical properties of dentine against enzymatic degradation. METHODOLOGY: CSnp was synthesized and characterized considering physiochemical parameters and stability. The root canals of 90 single-rooted teeth were prepared and irrigated with NaOCl. Dentine discs were obtained and divided into groups according to the following irrigation protocols: Group NaOCl+EDTA, Group NaOCl+CSnp, Group NaOCl+EDTA+CSnp, Group NaOCl+CSnp+Genipin, Group NaOCl+EDTA+CSnp+Genipin and Group distilled water. (1) Mechanical changes were determined by microhardness analysis using Vickers-tester. (2) Chemical changes were determined by evaluating molecular and elemental compositions of dentine using Fourier transform infrared spectroscopy (FTIR) analysis and scanning electron microscope (SEM)/energy dispersive X-ray spectroscopy (EDS) analysis, respectively. All analyses were repeated after the discs were kept in collagenase for 24 h. Data were analysed with repeated measures analysis of variance and Bonferroni correction for microhardness analysis, and Kruskal-Wallis and Wilcoxon tests for FTIR and SEM/EDS analyses (p = .05). RESULTS: (1) Collagenase application did not have a negative effect on microhardness only in Group NaOCl+EDTA+CSnp+Genipin when compared with the post-irrigation values (p > .05). Post-collagenase microhardness of Group NaOCl+EDTA+CSnp and Group NaOCl+CSnp+Genipin was similar to the initial microhardness (p > .05). (2) After collagenase, Amide III/ PO 4 3 - ratio presented no change in Group NaOCl+EDTA+CSnp, Group NaOCl+CSnp+Genipin and Group NaOCl+EDTA+CSnp+Genipin (p > .05), while decreased in other groups (p < .05). Collagenase did not affect CO 3 2 - / PO 4 3 - ratio in the groups (p > .05). There were no changes in the groups in terms of elemental level before and after collagenase application (p > .05). CONCLUSIONS: CSnp and genipin positively affected the microhardness and molecular composition of dentine. This effect was more pronounced when CSnp was used after EDTA.

Influence of peanut hairy root cultivars on prenylated stilbenoid production and the response mechanism for combining the elicitors of chitosan, methyl jasmonate, and cyclodextrin.

MAIN CONCLUSION: Peanut cultivars are known to produce stilbene compounds. Transcriptional control plays a key role in the early stages of the stress response mechanism, involving both PR-proteins and stilbene compounds. In this study, the production of stilbenoid compounds, especially prenylated, was investigated in two cultivars of peanut hairy root lines, designated as K2-K599 and T9-K599 elicited with a combination of chitosan (CHT), methyl jasmonate (MeJA), and cyclodextrin (CD): CHT + MeJA + CD. The antioxidant activities and stilbenoid content of both K2-K599 and T9-K599 hairy root lines increased significantly during the elicitation period. The T9-K599 hairy root line expressed higher ABTS and FRAP antioxidant activities than the K2-K599 line while the latter exhibited greater total phenolic content than the former at all-time points. Additionally, the K2-K599 line exhibited more stilbene compounds, including trans-resveratrol, trans-arachidin-1, and trans-arachidin-3 than the T9-K599 line, which showed statistically significant differences at all-time points. Gene expression of the enzyme involved in the stilbene biosynthesis pathway (PAL, RS, RS3) was observed, responding early to elicitor treatment and the metabolic production of a high level of stilbenoid compounds at a later stage. The antioxidant enzyme (CuZn-SOD, APX, GPX) and pathogenesis-related protein (PR; PR4A, PR5, PR10, chitinase) genes were strongly expressed after elicitor treatment at 24 h and decreased with an increasing elicitation time. Investigation of the response mechanism illustrates that the elicitor treatment can affect various plant responses, including plant cell wall structure and integrity, antioxidant system, PR-proteins, and secondary plant metabolites at different time points after facing external environmental stimuli.

Basic Substances, a Sustainable Tool to Complement and Eventually Replace Synthetic Pesticides in the Management of Pre and Postharvest Diseases: Reviewed Instructions for Users.

Synthetic pesticides are widely used to protect crops from pathogens and pests, especially for fruits and vegetables, and this may lead to the presence of residues on fresh produce. Improving the sustainability of agriculture and, at the same time, reducing the adverse effects of synthetic pesticides on human health requires effective alternatives that improve the productivity while maintaining the food quality and safety. Moreover, retailers increasingly request fresh produce with the amounts of pesticides largely below the official maximum residue levels. Basic substances are relatively novel compounds that can be used in plant protection without neurotoxic or immune-toxic effects and are still poorly known by phytosanitary consultants (plant doctors), researchers, growers, consumers, and decision makers. The focus of this review is to provide updated information about 24 basic substances currently approved in the EU and to summarize in a single document their properties and instructions for users. Most of these substances have a fungicidal activity (calcium hydroxide, chitosan, chitosan hydrochloride, Equisetum arvense L., hydrogen peroxide, lecithins, cow milk, mustard seed powder, Salix spp., sunflower oil, sodium chloride, sodium hydrogen carbonate, Urtica spp., vinegar, and whey). Considering the increasing requests from consumers of fruits and vegetables for high quality with no or a reduced amount of pesticide residues, basic substances can complement and, at times, replace the application of synthetic pesticides with benefits for users and for consumers. Large-scale trials are important to design the best dosage and strategies for the application of basic substances against pathogens and pests in different growing environments and contexts.

Effect of Biodegradable Coatings on the Growth of Aspergillus flavus In Vitro, on Maize Grains, and on the Quality of Tortillas during Storage.

The fungus Aspergillus flavus causes serious damage to maize grains and its by-products, such as tortilla. Currently, animal and plant derivatives, such as chitosan and propolis, and plant extract residues, respectively, are employed as alternatives of synthetic fungicides. The objective of this research was to evaluate the efficacy of several formulations based on propolis-chitosan-pine resin extract on the in vitro growth of A. flavus, the growth of maize grain plantlets and the quality of stored tortillas at 4 and 28 °C. The most outstanding formulation was that based on 59.7% chitosan + 20% propolis nanoparticles + 20% pine resin extract nanoparticles; since the in vitro conidia germination of A. flavus did not occur, disease incidence on grains was 25-30% and in tortillas, 0% infection was recorded, along with low aflatoxin production (1.0 ppb). The grain germination and seedling growth were markedly reduced by the nanocoating application. The percentage weight loss and color of tortillas were more affected by this coating compared to the control, and the rollability fell within the scale of non-ruptured at 4 °C and partially ruptured at 28 °C. The next step is to evaluate the toxicity of this formulation.

Phenolic Compound Profile by UPLC-MS/MS and Encapsulation with Chitosan of Spondias mombin L. Fruit Peel Extract from Cerrado Hotspot-Brazil.

Taperebá (Spondias mombin L.) is a native species of the Brazilian Cerrado that has shown important characteristics such as a significant phenolic compound content and biological activities. The present study aimed to characterize the phenolic compound profile and antioxidant activity in taperebá peel extract, as well as microencapsulating the extract with chitosan and evaluating the stability of the microparticles. The evaluation of the profile of phenolic compounds was carried out by UPLC-MS/MS. The in vitro antioxidant activity was evaluated by DPPH and ABTS methods. The microparticles were obtained by spray drying and were submitted to a stability study under different temperatures. In general, the results showed a significant content of polyphenols and antioxidant activity. The results of UPLC-MS/MS demonstrated a significant content of polyphenols in taperebá peel, highlighting the high content of ellagic acid and quercetin compounds. There was significant retention of phenolic compounds when microencapsulated, demonstrating high retention at all evaluated temperatures. This study is the first to microencapsulate the extract of taperebá peel, in addition to identifying and quantifying some compounds in this fruit.

A resonance Rayleigh scattering and fluorescence quenching dual-channel sensor for sensitive detection of chitosan based on Eosin Y.

The sensitive chitosan (CTS) detection methods based on the resonance Rayleigh scattering (RRS) quenching method and fluorescence quenching of Eosin Y were put forward. In the HAC-NaAC buffer solution, Eosin Y interacted with Triton X-100 to generate the binary complex which served as the RRS spectral probe. When CTS was interacted with the binary complex, the RRS intensity decreased with the increase of CTS. At the same time, the fluorescence intensity of Eosin Y decreased in the presence of Triton X-100, and the fluorescence intensity of "Eosin Y+Triton X-100" system further decreased when CTS was added. So it was further proved that there was a forming complex in "Eosin Y+Triton X100+CTS" system. The interaction was characterized by zeta potential, RRS, fluorescence spectrum, and UV-Vis spectroscopy. Under optimal conditions, there was a good linear relationship between the RRS decreased intensity (ΔI) and the concentration of CTS in the range of 0.05-1.30 µg/mL, with a regression equation of ΔI = 1325c + 73.66 and correlation coefficient (R2) of 0.9907. The detection limit was 0.0777 µg/mL. Likewise, the linear range of the fluorescence quenching was 0.03-1.30 µg/mL; the regression equation was ΔF = 1926c + 294.0 with R2 = 0.9800 under fluorescence quenching. The detection limit was 0.0601 µg/mL. Therefore, the dual-channel sensor for the determination of CTS was applied to the health products, and the results were satisfactory. The t test result showed that there was no statistical difference between the two methods.

Effect of chitosan and gum Arabic with natamycin on the aroma profile and bacterial community of Australian grown black Périgord truffles (Tuber melansoporum) during storage.

This study aimed to assess the effect of chitosan or gum Arabic edible coatings, with natamycin (200, 300, 400 mg/L) on the aroma profiles of Western Australian grown truffles at five storage intervals: 0, 7, 14, 21, and 28 days using solid-phase microextraction (SPME)-followed by gas chromatography-mass spectrometry (GC-MS). The population structure of the bacterial community of both untreated and chitosan-natamycin (400 mg/L) coated truffles were assessed using metagenomic sequencing analysis alongside GC-MS. The results demonstrated that all the coating treatments were able to have a positive impact in halting or delaying the changes of truffle aroma throughout the storage period, with chitosan-natamycin (400 mg/L) coating having the best preservation results compared to the other coatings. Only 9 volatile organic compounds (VOCs) were found to have significant changes in chitosan-natamycin (400 mg/L) coated truffles throughout the storage period compared to 11 VOCs in untreated controls. The result also demonstrated the gradual change of fresh truffle's bacteria communities over the storage period. Over 4 weeks of storage, the dominant bacterial classes of the truffles (α-Proteobacteria, Bacteroidia or Actinobacteria classes) were replaced by Bacteroidia, Actinobacteria, Deltaprotobacteria and γ-Proteobacteria classes. The preliminary results from this study show that edible coatings can affect the VOC and bacterial communities of the truffles which may have implications for future research into truffle preservation techniques.

Effects of the pre-fermentative addition of chitosan on the nitrogenous fraction and the secondary fermentation products of SO2 -free red wines.

BACKGROUND: Different red winemaking were carried out to evaluate the effects of the prefermentative addition of chitosan, as an alternative to the use of SO2 , on the secondary products of alcoholic fermentation, yeast available nitrogen (YAN), biogenic amines and ethyl carbamate. RESULTS: The wines made with chitosan presented higher total acidity and higher content of tartaric and succinic acids than those made only with SO2 . The use of chitosan in winemaking resulted in wines with higher glycerol and diacetyl content without increasing the concentration of ethanol, acetic acid, acetaldehyde or butanediol. YAN was lower in wines made with chitosan, which may mean an advantage for the microbial stability of the wines. Furthermore, the use of chitosan at the beginning of alcoholic fermentation did not increase the concentration of biogenic amines or the formation of ethyl carbamate in SO2 -free red wines. CONCLUSION: The total or partial substitution of SO2 for chitosan at the beginning of the alcoholic fermentation gives rise to quality red wines without negatively affecting their nitrogen fraction or their very important secondary fermentation products such as acetic acid or acetaldehyde. © 2020 Society of Chemical Industry.

Study of the Acetylation Pattern of Chitosan by Pure Shift NMR.

Chitosan is a biodegradable, antibacterial, and nontoxic biopolymer used in a wide range of applications including biotechnology, pharmacy, and medicine. The physicochemical and biological properties of chitosan have been associated with parameters such as the degree of polymerization (DP) and the fraction of acetylation (FA). New methods are being developed to yield chitosans of specific acetylation patterns, and, recently, a correlation between biological activity and the distribution of the acetylated units (PA: pattern of acetylation) has been demonstrated. Although there are numerous well-established methods for the determination of DP and FA values, this is not the case for PA. The methods available are either not straightforward or not sensitive enough, limiting their use for routine analysis. In this study, we demonstrate that by applying HOmodecoupled Band-Selective (HOBS) decoupling NMR on signals assigned by multidimensional Pure Shift NMR methods, PA can be easily and accurately determined on various chitosan samples. This novel methodology-easily implemented for routine analysis-could become a standard for chitosan PA assessment. In addition, by applying Spectral Aliased Pure Shift HSQC, the analysis was enhanced with the determination of triads.

Flame-Retardant Systems Based on Chitosan and Its Derivatives: State of the Art and Perspectives.

During the last decade, the utilization of chitin, and in par0ticular its deacetylated form, i.e., chitosan, for flame retardant purposes, has represented quite a novel and interesting application, very far from the established uses of this bio-sourced material. In this context, chitosan is a carbon source that can be successfully exploited, often in combination with intumescent products, in order to provide different polymer systems (namely, bulky materials, fabrics and foams) with high flame retardant (FR) features. Besides, this specific use of chitosan in flame retardance is well suited to a green and sustainable approach. This review aims to summarize the recent advances concerning the utilization of chitosan as a key component in the design of efficient flame retardant systems for different polymeric materials.

Subacute feeding toxicity of low-sodium sausages manufactured with sodium substitutes and biopolymer-encapsulated saltwort (Salicornia herbacea) in a mouse model.

BACKGROUND: Low-sodium sausages were manufactured using sodium substitution and biopolymer encapsulation. A diet comprising 10% treatment sausages (six treatment groups: C (100% NaCl), T1 (55% sodium substitute + 45% saltwort salt), T2 (55% sodium substitute + 45% saltwort salt with chitosan), T3 (55% sodium substitute + 45% saltwort salt with cellulose), T4 (55% sodium substitute + 45% saltwort salt with dextrin), and T5 (55% sodium substitute + 45% saltwort salt with pectin)) was added to a 90% commercial mouse diet for 4 weeks. RESULTS: Subacute toxicity, hematology, liver function, and organ weight tests in low-sodium sausage groups showed results similar to those of the control group, and all toxicity test levels were within normal ranges. CONCLUSIONS: All low-sodium sausage types tested are suggested to be safe in terms of subacute toxicity. Moreover, low-sodium sausages can be manufactured by biopolymer encapsulation of saltwort using pectin, chitosan, cellulose, and dextrin without toxicity. © 2019 Society of Chemical Industry.

CD4+ T Cell Regulation of Antibodies Cross-Reactive with Fungal Cell Wall-Associated Carbohydrates after Pneumocystis murina Infection.

Pneumocystis pneumonia is a life-threatening opportunistic fungal infection observed in individuals with severe immunodeficiencies, such as AIDS. Molecules with the ability to bind ß-glucan and signal at Fcγ receptors enhance defense against Pneumocystis f. sp. murina, though it is unclear whether antibodies reactive with fungal cell wall carbohydrates are induced during Pneumocystis infection. We observed that systemic and lung mucosal immunoglobulins cross-reactive with ß-glucan and chitosan/chitin are generated after Pneumocystis infection, with increased quantities within the lung mucosal fluid after challenge. While IgG responses against Pneumocystis protein antigens are markedly CD4+ T cell dependent, CD4+ T cell depletion did not impact quantities of IgG cross-reactive with ß-glucan or chitosan/chitin in the serum or mucosa after challenge. Notably, lung mucosal quantities of IgA cross-reactive with ß-glucan or chitosan/chitin are decreased in the setting of CD4+ T cell deficiency, occurring in the setting of concurrent reduced quantities of active transforming growth factor ß, while mucosal IgM is significantly increased in the setting of CD4+ T cell deficiency. Interleukin-21 receptor deficiency does not lead to reduction in mucosal IgA reactive with fungal carbohydrate antigens after Pneumocystis challenge. These studies demonstrate differential CD4+ T cell-dependent regulation of mucosal antibody responses against ß-glucan and chitosan/chitin after Pneumocystis challenge, suggesting that different B cell subsets may be responsible for the generation of these antibody responses, and suggest a potential immune response against fungi that may be operative in the setting of CD4+ T cell-related immunodeficiency.

Schistocerca piceifrons piceifrons (Orthoptera: Acrididae) as a Source of Compounds of Biotechnological and Nutritional Interest.

The Central American locust, Schistocerca piceifrons piceifrons (Walker) is a major agricultural pest in Mexico and Central America. Control measures against this pest have generated much environmental damage and substantial financial costs because chemical insecticides are used. Yet various Orthoptera species also appear to be a potential source of nutrients and a source of bioactive metabolites. Here, we studied the presence of secondary metabolites in the adult stage of S. p. piceifrons by applying different colorimetric techniques. Adults were collected from the southern region of Tamaulipas, Mexico, during September-December 2017. These samples were subjected to sequential processes of eviscerating, drying, pulverizing, extracting, and detecting of metabolites. Extractions were carried out in water, 50% ethanol, and absolute ethanol. The presence of phenolic compounds, alkaloids, tannins, saponins, flavonoids, and quantity of antioxidants against the DPPH (2, 2-diphenyl-1-picrylhydrazyl) and ABTS (2, 2'-azino-bis, 3-ethylbenzothiazoline-6-sulfonic acid) radicals were determined and reported. Proximate analysis showed that S. p. piceifrons has a high protein content (80.26%), low fat content (6.21%), and fiber content (12.56%) similar to other Orthoptera species. Chitin and chitosan contents of S. p. piceifrons were 11.88 and 9.11%, respectively; the recovery percentage of chitosan from chitin was 76.71%. Among the Orthoptera, the protein content of this pest is among the highest while its contents of chitin and chitosan are similar to those of other insect species (e.g., Bombix mori Linnaeus [Lepidoptera: Bombycidae]). Our results suggest this pest species is a potential source of bioactive compounds of biotechnological interest for use by pharmaceutical and food industries.

Lectin-carbohydrate complex evaluation by chemiluminescence.

In order to characterize the affinity between specific carbohydrate-binding proteins such as lectins, a model is proposed to study these interactions using a polysaccharide membrane to simulate such adsorption. Here, lectin-carbohydrate interactions were chemiluminescently investigated using lectins conjugated to acridinium ester (AE) and polysaccharides composed of their respective specific carbohydrates. The lectin-AE conjugates were incubated with discs (0.0314-0.6358 cm2) of phytagel, chitosan and carrageenan. The complex formation chemiluminescently detected followed the Langmuir isotherm from which constants were estimated. The association constant (Ka) and maximum binding sites on the membranes were 2.4 × 10-7 M-1 ±â€¯0.8 × 10-7 M-1 and 1.3 × 10-3 mol. mg-1 ± 0.3 × 10-3 mol. mg-1 (Con A); 0.9 × 10-6 M-1 ±â€¯0.4 × 10-6 M-1 and 0.021 × 10-3 mol. mg-1 ± 0.003 × 10-3 mol. mg-1 (WGA) and 2.0 × 10-6 M-1 ±â€¯0.9 × 10-6 M-1 and 0.069 × 10-3 mol. mg-1 ± 0.010 × 10-3 mol. mg-1 (PNA). The proposed model might be useful to study binding affinity and estimate the amount of binding not limited by the sugar content in the membrane.

Controlled depolymerisation assessed by analytical ultracentrifugation of low molecular weight chitosan for use in archaeological conservation.

The heterogeneity and molecular weight of a chitosan of low molecular weight (molar mass) and low degree of acetylation (0.1) for potential use as a consolidant for decayed archaeological wood were examined by sedimentation velocity and sedimentation equilibrium in the analytical ultracentrifuge before and after depolymerisation. Sedimentation velocity before depolymerisation revealed a uniform distribution of sedimentation coefficient with little concentration dependence. SEDFIT-MSTAR analysis revealed a weight average molecular weight Mw of (14.2 ± 1.2) kDa, and polydispersity index of ~ 1.2. Further analysis using MULTISIG revealed a distribution of material between 2 and 20 kDa and consistent with the weight average Mw. Controlled depolymerisation using hydrogen peroxide and ultra-violet radiation in an acetic acid medium reduced this to (4.9 ± 0.7) kDa, with a similar polydispersity. The depolymerised material appears to be within the range that has been predicted to fully penetrate into archaeological wood. The consequences for this finding and the use of the analytical ultracentrifuge in wood conservation strategies are considered.

Chitosan Analysis by Enzymatic/Mass Spectrometric Fingerprinting and in Silico Predictive Modeling.

Chitosans, ß-1,4-linked partially N-acetylated linear polyglucosamines, are very versatile and promising functional biopolymers. Understanding their structure-function relationships requires sensitive and accurate structural analyses to determine parameters like degree of polymerization (DP), fraction of acetylation (FA), or pattern of acetylation (PA). NMR, the gold standard for FA analysis, requires large amounts of sample. Here, we describe an enzymatic/mass spectrometric fingerprinting method to analyze the FA of chitosan polymers. The method combines the use of chitinosanase, a sequence-specific hydrolase that cleaves chitosan polymers into oligomeric fingerprints, ultrahigh-performance liquid chromatography-electrospray ionization-mass spectrometry (UHPLC-ESI-MS), and partial least-squares regression (PLSR). We also developed a technique to simulate enzymatic fingerprints in silico that were used to build the PLS models for FA determination. Overall, we found our method to be as accurate as NMR while at the same time requiring only microgram amounts of sample. Thus, the method represents a powerful technique for chitosan analysis.

Synthesis and Characterization of PEGylated and Fluorinated Chitosans: Application to the Synthesis of Targeted Nanoparticles for Drug Delivery.

To synthesize chitosan nanoparticles (CS NPs), ionic gelation is a very attractive method. It relies on the spontaneous supramolecular assembly of cationic CS with anionic compounds, which leads to nanohydrogels. To extend ionic gelation to functionalized CS, the assessment of CS degree of substitution (DSCS) is a key step. In this paper, we have developed a hyphenated strategy for functionalized CS characterization, based upon 1H, DOSY and, when relevant, 1D diffusion-filtered 19F NMR spectroscopies. For that, we have synthesized two series of water-soluble CS via amidation of CS amino groups with mPEG2000-COOH or fluorinated synthons (TFB-COOH). The aforementioned NMR techniques helped to discriminate between ungrafted and grafted synthons and finally to determine DSCS. According to DSCS values, the selection of CS-mPEG2000 or CS-TFB copolymers can be made to obtain, in the presence of hyaluronic acid (HA) and tripolyphosphate (TPP), CS-mPEG2000-TPP/HA or CS-TFB-TPP/HA nanohydrogels suitable for drug delivery.

Resonance Rayleigh scattering methods for the determination of chitosan with Congo red as probe.

Two methods were presented for the sensitive and selective determination of chitosan (CTS) with Congo red (CR) as probe based on resonance Rayleigh scattering (RRS) intensities in health products. In weakly acidic buffer solution, the binding of CTS to CR, could result in the enhancement of the RRS intensities. Moreover, after adding OP emulsifier (octyl-phenyl polyoxyethylene ether) to the system, the RRS intensities showed more significantly enhancement. The maximum RRS signals for the CTS-CR system and the CTS-CR-OP system were located at 380 nm and 376 nm, respectively. Under optimum experimental conditions, the increased RRS intensities (ΔI) of these two systems were linear to CTS concentration in the range of 0.40-8.00 µg/ml and 0.05-1.00 µg/ml. Their limits of detection (LOD) were 44.81 ng/ml and 6.99 ng/ml, which indicated that the latter system was more sensitive than the former. In this work, the optimum conditions and the effects of some foreign substances on the determination were studied. In addition, the effect of the molecular weight of CTS and the reasons for the enhancement of resonance light scattering were discussed. Finally, these two methods were applied to the determination of chitosan in health products with satisfactory results.

Hydrophobic amino acids grafted onto chitosan: a novel amphiphilic chitosan nanocarrier for hydrophobic drugs.

OBJECTIVE: The objective of this study is to develop a novel biocompatible amphiphilic drug delivery for hydrophobic drugs, chitosan (CS) was grafted to a series of hydrophobic amino acids including l-alanine (A), l-proline (P), and l-tryptophan (W) by carbodiimide mediated coupling reaction. MATERIALS AND METHODS: Chemical characteristics of the modified polymers were determined and confirmed by FT-IR, 1H NMR, and UV-vis spectroscopy and the degree of substitution was quantified by elemental analysis. The modified polymers were used to form amphiphilic chitosan nanocarriers (ACNs) by the conventional self-assembly method using ultrasound technique. The morphology and the size of ACNs were analyzed by scanning electron microscope (SEM) and Dynamic light scattering (DLS). RESULTS AND DISCUSSION: The sizes of spherical ACNs analyzed by SEM were obviously smaller than those of determined by DLS. The ACNs effectively surrounded the hydrophobic model drug, letrozole (LTZ), and demonstrated different encapsulation efficiencies (EE), loading capacities (LC), and controlled drug release profiles. The characteristics of ACNs and the mechanism of drug encapsulation were confirmed by molecular modeling method. The modeling of the structures of LTZ, profiles of A, P, and W grafted onto CS and the wrapping process around LTZ was performed by quantum mechanics (QM) methods. There was a good agreement between the experimental and theoretical results. The cell viability was also evaluated in two cell lines compared with free drug by MTT assay. CONCLUSION: The hydrophobic portion effects on ACNs' characteristics and the proper selection of amino acid demonstrate a promising potential for drug delivery vector.

Quantitative characterization of chitosan in the skin by Fourier-transform infrared spectroscopic imaging and ninhydrin assay: application in transdermal sciences.

The chitosan has been used as the primary excipient in transdermal particulate dosage form design. Its distribution pattern across the epidermis and dermis is not easily accessible through chemical assay and limited to radiolabelled molecules via quantitative autoradiography. This study explored Fourier-transform infrared spectroscopy imaging technique with built-in microscope as the means to examine chitosan molecular distribution over epidermis and dermis with the aid of histology operation. Fourier-transform infrared spectroscopy skin imaging was conducted using chitosan of varying molecular weights, deacetylation degrees, particle sizes and zeta potentials, obtained via microwave ligation of polymer chains at solution state. Both skin permeation and retention characteristics of chitosan increased with the use of smaller chitosan molecules with reduced acetyl content and size, and increased positive charge density. The ratio of epidermal to dermal chitosan content decreased with the use of these chitosan molecules as their accumulation in dermis (3.90% to 18.22%) was raised to a greater extent than epidermis (0.62% to 1.92%). A larger dermal chitosan accumulation nonetheless did not promote the transdermal polymer passage more than the epidermal chitosan. A small increase in epidermal chitosan content apparently could fluidize the stratum corneum and was more essential to dictate molecular permeation into dermis and systemic circulation. The histology technique aided Fourier-transform infrared spectroscopy imaging approach introduces a new dimension to the mechanistic aspect of chitosan in transdermal delivery.