Shear bond strength of self-adhesive resin cements to base metal alloy.

ABSTRACT

STATEMENT OF PROBLEM: Many self-adhesive cements have been introduced in the past few years, with little or no data regarding their clinical performance. This study investigated the shear bond strength of some recently introduced self-adhesive resin cements. PURPOSE: The purpose of this study was to evaluate the shear bond strength of self-adhesive and conventional resin-based cements to a base metal alloy. MATERIAL AND METHODS: Four groups (10-12 each) that comprised 3 self-adhesive cements (SmartCem2; RelyX Unicem; seT SDI) and a conventional resin-based cement (RelyX ARC) were tested. Cylindrical cement specimens (diameter, 3 mm; height, 3 mm) were applied to nickel-free base metal alloy (Sheradent) disks with a diameter of 12 mm, and the surface was treated with airborne-particle abrasion of 50 µm aluminum oxide. The metal disks were fixed in brass molds specifically designed for the shear bond test device. Test specimens were incubated at 37°C for 24 hours and then the shear bond was tested with a Zwick Roll testing machine at a 0.8 mm/min cross-head speed. In addition, bond failures were investigated and categorized as adhesive, cohesive, or mixed. Shear bond strengths were calculated by dividing the maximum debonding force over the cross-sectional area of each specimen. One-way ANOVA and the Tukey (honestly significant difference) post hoc test were used to test statistical significant differences among the groups (α=.05). RESULTS: Statistical analysis showed significant differences among different resin cements (F=14.34, P<.001). The highest mean shear bond strength was observed for SmartCem2 (14.18 MPa), and the lowest was reported for seT (3.52 MPa). The observed failure mode in all the materials was adhesive in nature, which occurred at the resin-metal interface. CONCLUSIONS: The early bond strength of self-adhesive resin cements varied significantly among the tested materials. SmartCem2 showed the highest bond strength, which was 4 times the strength observed for seT SDI.