Influences of lower pH on phytoplankton growth in alkaline lakes after water transfer: Insights from a coupled hydrodynamic-algal ecological model and experimental analysis.

Alkaline lakes with high pH and unique ecological communities often face water-level drawdown and ecological degradation problems due to climatic and hydrologic factors. Water transfer is becoming a popular method for solving these problems. However, a high pH is often considered the key to maintaining the stability of alkaliphilic algal communities, and a lower pH induced by water transfer from a neutral-pH river may threaten ecosystems in alkaline lakes. To explore the response characteristics of phytoplankton in alkaline lakes to pH changes, we conducted cultivation experiments on one species of dominant Cyanobacteria and one species of dominant Chlorophyta from alkaline lakes under different pH conditions. Subsequently, we constructed a coupled hydrodynamic and algal mathematical model considering the effect of pH to predict the dynamic changes in phytoplankton in a typical alkaline lake under water-transfer conditions. Both species are basophilic, and pH has a "low-inhibition and high-promotion" effect on their growth. A lower pH is detrimental to cyanobacterial growth and competitiveness, which may cause Cyanobacteria to lose their dominance in weakly alkaline environments with a pH < 8.5; additionally, water transfer causes a decrease in the total biomass and proportion of Cyanobacteria in Lake Chenghai, with decreases induced by pH changes accounting for 13.4% and 70.1%, respectively. The decrease in pH is the main reason for the decrease in dominance of Cyanobacteria after water transfer. These results provide a basic summary of the effects of pH changes on the algal growth in alkaline lakes and are a useful for formulating ecological water-transfer strategies for alkaline lakes.

Lower Extremity Reconstruction with Anterolateral Thigh Free-Flap Anastomoses: A Computational Fluid Dynamic Analysis.

BACKGROUND: The anterolateral thigh free flap is an option for repairing soft tissue defects of the distal lower extremity. This flap uses the descending branch of the lateral circumflex femoral (LCF) artery as the flap vessel. The recipient vessel in these flaps is often the anterior tibial (AT), posterior tibial (PT), or peroneal (P) arteries. Computational fluid dynamic (CFD) evaluation of anastomoses between these vessels can optimize outcomes. METHODS: Thirty-eight CFD models were created to model end-to-side (ETS) and end-to-end (ETE) anastomoses for lower extremity reconstruction. Seven out of thirty-eight models represented ETS anastomoses between the LCF and AT arteries with varying anastomotic angles. Nine out of thirty-eight models represented 45-degree ETS anastomoses between varying diameters of the LCF and AT, PT, and P arteries. Nine out of thirty-eight models represented stenosis on the flap vessel and recipient vessel, pre- and post-bifurcation. Nine out of thirty-eight models represented ETE anastomoses, rather than ETS, with varying vessel diameters. Four out of thirty-eight models represented ETE anastomoses with varying regions and levels of stenosis. RESULTS: Stasis of blood flow in ETS models increased as anastomotic angle increased in a logarithmic relationship (R 2 = 0.918). Flow was optimized overall as flap and recipient vessel diameters approached one another. In ETS models, flap vessel and postbifurcation recipient vessel stenosis were found to substantially increase stasis. CONCLUSION: Selection of flap and recipient vessels with similar diameters can optimize outcomes in microvascular anastomoses. In the context of lower extremity reconstruction with the ALT flap, the PT artery can be recommended as a first-line recipient vessel due to its similar vessel caliber to the LCF and relative ease of surgical access compared with the P artery. Avoidance of areas of stenosis is recommended to ensure laminar flow and reduce the operative difficulty associated with performing anastomoses on nonpliable arteries. Striving for increased acuity of anastomotic angles is recommended to optimize the flow in ETS microvascular anastomoses.

Hemodynamic alterations of flow diverters on aneurysms at the fetal posterior communicating artery: A simulation study using CFD to compare the surpass streamline, pipeline flex, and tubridge devices.

PURPOSE: Traditional flow diverters (FDs) for treating aneurysms at the fetal posterior communicating artery are unsatisfactory. Surpass Streamline is a novel FD with different mesh characteristics; however, the outcomes for such aneurysms remain unclear. This study aimed to compare hemodynamic alterations induced by Surpass Streamline, Pipeline Flex, and Tubridge devices and explore possible strategies for aneurysms at the fetal posterior communicating artery. METHODS: Two simulated aneurysms (Case 1, Case 2) were constructed from digital subtraction angiography (DSA). The three FDs were virtually deployed, and hemodynamic analysis based on computational fluid dynamics was performed. Hemodynamic parameters, including the sac-averaged velocity magnitude (Velocity), high-flow volume (HFV), and wall shear stress (WSS), were compared between each FD and the untreated model (control). Surpass Streamline was performed in real life for two aneurysms and the clinical outcomes were collected for analysis. RESULTS: Compared to the control, the Surpass resulted in the most significant reduction in flow. In Case 1, the Velocity, HFV, and WSS were reduced by 51.6%, 78.1%, and 64.3%, respectively. In Case 2, the Velocity, HFV, and WSS were reduced by 48.0%, 81.1%, and 65.3%, respectively. Tubridge showed slightly larger changes in hemodynamic parameters than Pipeline. In addition, our analysis suggested that metal coverage was correlated with the WSS, Velocity, and HFV. The postoperative DSA showed that the aneurysm was nearly occluded in Case 1 and decreased in Case 2. CONCLUSION: Compared to that with the Pipeline and Tubridge, the Surpass resulted in the greatest reduction in hemodynamic parameters and might be effective for aneurysms at the fetal posterior communicating artery. Virtual FD deployment and computational fluid dynamics analysis may be used to predict the treatment outcomes.

Prediction of biological development effects on drag forces of ceramic hull coating using Reynolds-averaged Navier-Stokes-based solver.

Ships in service feature surfaces that exhibit biofouling, which alters the hydrodynamics of the vessels, thus affecting their normal displacement and significantly increasing their fuel consumption. The application of three types of ceramic coatings as ecological, effective and durable alternatives to commercial silicone-based marine coatings is investigated in this study. Three different ceramic glazes and two control commercial paints are analysed in an actual environment during 20 months of exposure to simulate the navigation conditions such that growth and roughness data can be obtained and then applied to computational fluid dynamics (CFD) software using an open-source Reynolds-averaged Navier-Stokes solver. The CFD results are validated under smooth hull conditions with a full-scale Kriso Container Ship (KCS) model and with different levels of hull roughness. The developed approach shows that the drag in hulls coated with conventional paint is 19% greater than that in hulls with ceramic coating.

"Simulation of medical goggles to stop airborne transmission of viruses: computational fluid dynamics in ergonomics".

This paper presents a position statement on combining computational fluid dynamics (CFD) and ergonomics to guide the design of personal protective equipment (PPE). We used CFD to simulate 36 exposure scenarios of an infected patient sneezing at different distances and different angles while facing either the front or the side of a healthcare worker with or without goggles. The results show that medical goggles indeed block most droplets from the outer surface, but many droplets still deposit on the bottom edge (especially at the nose), inside the air holes and on the side edge. However, the edges of medical goggles have fitment problems with people in different regions, and the air holes do not function as filters and cannot prevent fine droplets from entering the interior and contacting the eyes. Our research demonstrates the feasibility of studying the design of PPE for airtightness and protection by means of CFD.Practitioner summary: Computational fluid dynamics can quickly and efficiently reflect the airtightness design problems of PPE. A model was developed using CFD to examine the protective effect of medical goggles in preventing the airborne transmission of viruses. The model demonstrates the feasibility of using CFD to solve ergonomic problems.Abbreviations: CFD: computational fluid dynamics; PPE: personal protective equipment; WHO: the World Health Organisation; COVID-19: coronavirus disease 2019; SARS-CoV-2: severe acute respiratory syndrome coronavirus 2; OSHA: the Occupational Safety and Health Administration; CDC: the Centres for Disease Control; FEM: finite element method; 3M: Minnesota Mining and Manufacturing Corporation; SPH: smoothed particle hydrodynamics; AROM: active range of motion; DPM: discrete phase model; PISO: pressure implicit with splitting of operators; VR: virtual reality; AR: augmented reality.

Spatial programming of self-organizing chemical systems using sustained physicochemical gradients from reaction, diffusion and hydrodynamics.

Living organisms employ chemical self-organization to build structures, and inspire new strategies to design synthetic systems that spontaneously take a particular form, via a combination of integrated chemical reactions, assembly pathways and physicochemical processes. However, spatial programmability that is required to direct such self-organization is a challenge to control. Thermodynamic equilibrium typically brings about a homogeneous solution, or equilibrium structures such as supramolecular complexes and crystals. This perspective addresses out-of-equilibrium gradients that can be driven by coupling chemical reaction, diffusion and hydrodynamics, and provide spatial differentiation in the self-organization of molecular, ionic or colloidal building blocks in solution. These physicochemical gradients are required to (1) direct the organization from the starting conditions (e.g. a homogeneous solution), and (2) sustain the organization, to prevent it from decaying towards thermodynamic equilibrium. We highlight four different concepts that can be used as a design principle to establish such self-organization, using chemical reactions as a driving force to sustain the gradient and, ultimately, program the characteristics of the gradient: (1) reaction-diffusion coupling; (2) reaction-convection; (3) the Marangoni effect and (4) diffusiophoresis. Furthermore, we outline their potential as attractive pathways to translate chemical reactions and molecular/colloidal assembly into organization of patterns in solution, (dynamic) self-assembled architectures and collectively moving swarms at the micro-, meso- and macroscale, exemplified by recent demonstrations in the literature.

Guiding the Prostatic Artery Embolization Procedure With Computational Fluid Dynamics.

Benign prostatic hyperplasia (BPH) is a common disease associated with lower urinary tract symptoms and is the most frequent benign tumor in men. To reduce BPH therapy complications, prostatic artery embolization (PAE) was developed to replace the surgical options. PAE is a minimally invasive technique in which emboli are injected into the prostate arteries (PA), obstructing the blood flow in the hypervascular nodules. In this work, a personalized PAE treatment strategy was proposed using patient-specific computational fluid dynamics (CFD). First, the hemodynamics environment in the iliac arterial tree considering a large network of bifurcations was studied. The results showed complex blood flow patterns in the iliac arterial network. Subsequently, the transport of embolic particulates during PAE for the standard horizontal and hypothetical vertical patient positioning was simulated using Lagrangian particle tracking. Emboli of different sizes were released at various locations across the iliac arterial tree. The emboli entering the PA were mapped back to their initial location to create emboli release maps (ERMs). The obtained ERMs during the standard patient positioning for smaller emboli at certain release locations showed distinct regions in which if the emboli were released within these regions, all of them would reach the PA without nontarget embolization. During the hypothetical vertical patient positioning, the larger emboli formed a larger coherent region in the ERMs. Our patient-specific model can be used to find the best spatial location for emboli injection and perform the embolization procedure with minimal off-target delivery.

A rapid benchtop method to assess biofilm on marine fouling control coatings.

A rapid benchtop method to measure the torque associated with minidiscs rotating in water using a sensitive analytical rheometer has been used to monitor the drag caused by marine fouling on coated discs. The method was calibrated using sandpaper surfaces of known roughness. Minidiscs coated with commercial fouling control coatings, plus an inactive control, were exposed in an estuarine harbour. After 176 days the drag on the fouling control-coated discs, expressed as a moment coefficient, was between 73% and 90% less than the drag on the control coating. The method has potential use as a screen for novel antifouling and drag reducing coatings and surfaces. Roughness functions derived using Granville's indirect similarity law are similar to patterns found in the general hydrodynamics literature, and so rotational minidisc results can be considered with reference to other fouling drag datasets.Supplemental data for this article is available online at https://doi.org/10.1080/08927014.2021.1929937 .

Using aeration to probe the flow characteristics associated with long-term marine macrofouling growth and suppression.

It is well-established that hydrodynamics affect the settlement of biofouling organisms. Laboratory studies have demonstrated a connection between larval attachment rates and the prevalence of time windows that satisfy certain instantaneous flow conditions. However, it is unclear whether a link exists between short-term hydrodynamics and long-term macrofouling survival and growth, or if it is applicable at an ecosystem-wide level. This study used single bubble stream aeration in field and laboratory experiments to find critical flow characteristics that correlate to long-term, multi-species fouling prevention. The research was accomplished by combining PIV-derived flow statistics with fouling severity measured over seven weeks in the field. Flows with a decreasing proportion of time windows defined by a flow speed < 15.1 mm s-1 for longer than 0.03 s correlated to decreased biofouling growth and survival. These results provide a potential framework for studying and comparing flow fields that successfully inhibit biofouling growth.

Evolution of specialized microbial cooperation in dynamic fluids.

Here, we study the evolution of specialization using realistic computer simulations of bacteria that secrete two public goods in a dynamic fluid. Through this first-principles approach, we find physical factors such as diffusion, flow patterns and decay rates are as influential as fitness economics in governing the evolution of community structure, to the extent that when mechanical factors are taken into account, (a) generalist communities can resist becoming specialists despite the invasion fitness of specialization; (b) generalist and specialists can both resist cheaters despite the invasion fitness of free-riding; and (c) multiple community structures can coexist despite the opposing force of competitive exclusion. Our results emphasize the role of spatial assortment and physical forces on niche partitioning and the evolution of diverse community structures.

Effects of 'in-service' conditions - mimicked hull roughness ranges and biofilms - on the surface and the hydrodynamic characteristics of foul-release type coatings.

To develop a better understanding of 'in-service' performance of modern marine coatings, this study explored the combined effects of different roughness ranges of foul-release coating (FRC) and light biofouling (slime) on the surface, boundary layer and drag characteristics under a range of 'in-service' conditions. Natural and laboratory biofilms were grown dynamically on FRC panels by exposing panels in facilities dedicated to realistic fouling culture. The boundary layer experiments were conducted in a circulating water tunnel. Boundary layer similarity-law scaling was used to predict the combined effects of coating roughness and biofilms on the added frictional resistance (% ΔCF) and added required effective power  (%ΔPE ) for a benchmark KRISO container ship (KCS) and a bulk carrier. The increase in  %ΔPE  due to the presence of biofilms on commercial FRC is estimated to be between 7% and 16% depending on the biofilm type, biofilm thickness and percentage coverage. Significant increases in effective power are estimated for non-fouling control primers with heavy fouling. Moreover, the paper suggests updated roughness allowances ( ΔCF ) for two vessel types assuming FRCs on their hulls with more representative hull roughness ranges and fluffy biofilms.

Ship hull in-water cleaning and its effects on fouling-control coatings.

Today, ship hull fouling is managed through fouling-control coatings, complemented with in-water cleaning. During cleaning, coating damage and wear must be avoided, for maximum coating lifetime and reduced antifoulant release. When possible, cleaning should target early stages of fouling, using minimal forces. However, such forces, and their effects on coatings, have not yet been fully quantified. In this one-year study, minimal cleaning forces were determined using a newly-designed immersed waterjet. The results show that bi-monthly/monthly cleaning, with maximum wall shear stress up to ∼1.3 kPa and jet stagnation pressure ∼0.17 MPa, did not appear to cause damage or wear on either the biocidal antifouling (AF) or the biocide-free foul-release (FR) coatings. The AF coating required bi-monthly cleanings to keep fouling to incipient slime (time-averaged results), while the FR coating had a similar fouling level even without cleaning. The reported forces may be used in matching cleaning parameters to the adhesion strength of the early stages of fouling.

Thermoplastic, rubber-like marine antifouling coatings with micro-structures via mechanical embossing.

New processing routes and materials for non-biocidal, antifouling (AF) coatings with an improved performance are currently much sought after for a range of marine applications. Here, the processing, physical properties and marine AF performance of a fluorinated coating based on a thermoplastic (non-crosslinked) fluorinated polymer are reported. It was found that the addition of lubricating oil and hydrodynamic drag reducing microstructures improved the AF properties substantially, i.e. the settlement of a marine biofilm, containing mixed microalgae including diatoms, was reduced to low levels. More importantly, the remaining fouling was removed from the coatings at low hydrodynamic shear rates and promising AF properties were obtained. Moreover, additional potential benefits were revealed originating from the thermoplastic nature of the coating material which might result in significant cost reductions.

[Influence of cataract phacoemulsification on eye hydrodynamics in patients with prior trabeculectomy]. / Vliianie fakokhirurgii na gidrodinamiku glaza posle predshestvuiushchei sinustrabekuléktomii.

At present, phacoemulsification and trabeculectomy are the most widespread surgery methods in cataract and glaucoma treatment, generally recognized as the gold standard. Among elderly patients, comorbid glaucoma and cataract are extremely prevalent, so the order of the two surgeries and the time interval between them are pivotal choices when planning treatment strategy. The reason for it is that almost any eye surgery is considered a risk factor for long-term trabeculectomy effectiveness. In attempts to solve this problem, numerous studies have been conducted on the impact of cataract surgery on filtration bleb scarring. The problem of determining the time interval between surgeries, as well as other treatment nuances, remains relevant despite the long history of research and publications. Some results are cited as general recommendations on treatment tactics (increasing the time interval between operations, using antimetabolite and anti-inflammatory therapy, minimizing intraoperative traumatism). However, currently there are no specific recommendations for one of the most important factors - the time interval between cataract extraction and trabeculectomy.

Biodiversity characterisation and hydrodynamic consequences of marine fouling communities on marine renewable energy infrastructure in the Orkney Islands Archipelago, Scotland, UK.

As part of ongoing commitments to produce electricity from renewable energy sources in Scotland, Orkney waters have been targeted for potential large-scale deployment of wave and tidal energy converting devices. Orkney has a well-developed infrastructure supporting the marine energy industry; recently enhanced by the construction of additional piers. A major concern to marine industries is biofouling on submerged structures, including energy converters and measurement instrumentation. In this study, the marine energy infrastructure and instrumentation were surveyed to characterise the biofouling. Fouling communities varied between deployment habitats; key species were identified allowing recommendations for scheduling device maintenance and preventing spread of invasive organisms. A method to measure the impact of biofouling on hydrodynamic response is described and applied to data from a wave-monitoring buoy deployed at a test site in Orkney. The results are discussed in relation to the accuracy of the measurement resources for power generation. Further applications are suggested for future testing in other scenarios, including tidal energy.

Transported biofilms and their influence on subsequent macrofouling colonization.

Biofilm organisms such as diatoms are potential regulators of global macrofouling dispersal because they ubiquitously colonize submerged surfaces, resist antifouling efforts and frequently alter larval recruitment. Although ships continually deliver biofilms to foreign ports, it is unclear how transport shapes biofilm microbial structure and subsequent macrofouling colonization. This study demonstrates that different ship hull coatings and transport methods change diatom assemblage composition in transported coastal marine biofilms. Assemblages carried on the hull experienced significant cell losses and changes in composition through hydrodynamic stress, whereas those that underwent sheltered transport, even through freshwater, were largely unaltered. Coatings and their associated biofilms shaped distinct macrofouling communities and affected recruitment for one third of all species, while biofilms from different transport treatments had little effect on macrofouling colonization. These results demonstrate that transport conditions can shape diatom assemblages in biofilms carried by ships, but the properties of the underlying coatings are mainly responsible for subsequent macrofouling. The methods by which organisms colonize and are transferred by ships have implications for their distribution, establishment and invasion success.

Assessment of bridge scour in the lower, middle, and upper Yangtze River estuary with riverbed sonar profiling techniques.

Riverbed scour of bridge piers can cause rapid loss in foundation strength, leading to sudden bridge collapse. This study used multi-beam echo sounders (Seabat 7125) to map riverbed surrounding the foundations of four major bridges in the lower, middle, and upper reaches of the 700-km Yangtze River Estuary (YRE) during June 2015 and September 2016. The high-resolution data were utilized to analyze the morphology of the bridge scour and the deformation of the wide-area riverbed (i.e., 5-18 km long and 1.3-8.3 km wide). In addition, previous bathymetric measurements collected in 1998, 2009, and 2013 were used to determine riverbed erosion and deposition at the bridge reaches. Our study shows that the scour depth surrounding the bridge foundations progressed up to 4.4-19.0 m in the YRE. Over the past 5-15 years, the total channel erosion in some river reaches was up to 15-17 m, possessing a threat to the bridge safety in the YRE. Tide cycles seemed to have resulted in significant variation in the scour morphology in the lower and middle YRE. In the lower YRE, the riverbed morphology displayed one long erosional ditch on both sides of the bridge foundations and a long-strip siltation area distributed upstream and downstream of the bridge foundations; in the middle YRE, the riverbed morphology only showed erosional morphology surrounding the bridge foundations. Large dunes caused deep cuts and steeper contours in the bridge scour. Furthermore, this study demonstrates that the high-resolution grid model formed by point cloud data of multi-beam echo sounders can clearly display the morphology of the bridge scour in terms of wide areas and that the sonar technique is a very useful tool in the assessment of bridge scours.

Seat Belt Syndrome and the Submarine Effect: A Case Report.

The seatbelt sign is indicative of severe internal lesions in as many as 30% of cases. In the "submarine effect" the body slides below the belt, acting like hinge. "Seatbelt syndrome" describes the presence of the seat belt sign plus an intra-abdominal or spinal injury. We present the case of a driver in a car accident in whom severe soft tissue and visceral lesions were caused by a two-point seat-belt reproducing a complete "seatbelt syndrome".

[Parameters of ocular hydrodynamics in case of major neck blood vessels compression by thyroid nodules]. / Pokazateli gidrodinamiki glaza pri kompressii magistral'nykh sosudov shei uzlovymi obrazovaniyami shchitovidnoi zhelezy.

AIM: to study aqueous humor secretion and outflow in patients, whose major blood vessels of the neck got compressed by thyroid nodules. MATERIAL AND METHODS: Ocular hydrodynamics was assessed in 60 patients (119 eyes) with uni- or bilateral benign thyroid nodules compressing the major neck blood vessels. RESULTS: Most patients demonstrated a significant decrease in parameters of aqueous humor secretion and outflow. After decompression, ocular hydrodynamics usually improved reaching its normal level. CONCLUSION: Compression of the major neck blood vessels by thyroid nodules impedes drainage of the aqueous humor and serves as a risk factor of secondary phlebohypertensive glaucoma.

Purging of working atmospheres inside freight containers.

This article focuses on prevention of possible exposure to chemical agents, when opening, entering, and stripping freight containers. The container purging process is investigated using tracer gas measurements and numerical airflow simulations. Three different container ventilation conditions are studied, namely natural, mixed mode, and forced ventilation. The tests conducted allow purging time variations to be quantified in relation to various factors such as container size, degree of filling, or type of load. Natural ventilation performance characteristics prove to be highly variable, depending on environmental conditions. Use of a mechanically supplied or extracted airflow under mixed mode and forced ventilation conditions enables purging to be significantly accelerated. Under mixed mode ventilation, extracting air from the end of the container furthest from the door ensures quicker purging than supplying fresh air to this area. Under forced ventilation, purging rate is proportional to the applied ventilation flow. Moreover, purging rate depends mainly on the location at which air is introduced: the most favourable position being above the container loading level. Many of the results obtained during this study can be generalized to other cases of purging air in a confined space by general ventilation, e.g. the significance of air inlet positioning or the advantage of generating high air velocities to maximize stirring within the volume.