Plasmon-enabled degradation of organic micropollutants in water by visible-light illumination of Janus gold nanorods.

The development of sustainable methods for the degradation of pollutants in water is an ongoing critical challenge. Anthropogenic organic micropollutants such as pharmaceuticals, present in our water supplies in trace quantities, are currently not remediated by conventional treatment processes. Here, we report an initial demonstration of the oxidative degradation of organic micropollutants using specially designed nanoparticles and visible-wavelength sunlight. Gold "Janus" nanorods (Au JNRs), partially coated with silica to enhance their colloidal stability in aqueous solutions while also maintaining a partially uncoated Au surface to facilitate photocatalysis, were synthesized. Au JNRs were dispersed in an aqueous solution containing peroxydisulfate (PDS), where oxidative degradation of both simulant and actual organic micropollutants was observed. Photothermal heating, light-induced hot electron-driven charge transfer, and direct electron shuttling under dark conditions all contribute to the observed oxidation chemistry. This work not only provides an ideal platform for studying plasmonic photochemistry in aqueous medium but also opens the door for nanoengineered, solar-based methods to remediate recalcitrant micropollutants in water supplies.

Gold nanoparticles-decorated peptide hydrogel for antifouling electrochemical dopamine determination.

A reliable and brief ultralow fouling electrochemical sensing system capable of monitoring targets in complex biological media was constructed and validated based on gold nanoparticles-peptide hydrogel-modified screen-printed electrode. The self-assembled zwitterionic peptide hydrogel was prepared by a newly designed peptide sequence of Phe-Phe-Cys-Cys-(Glu-Lys)3 with the N-terminal modified with a fluorene methoxycarbonyl group. The thiol groups on cysteine of the designed peptide are able to self-assemble with AuNPs to form a three-dimensional nanonetwork structure, which showed satisfactory antifouling capability in complex biological media (human serum). The developed gold nanoparticles-peptide hydrogel-based electrochemical sensing platform displayed notably sensing properties for dopamine determination, with a wide linear range (from 0.2 nM to 1.9 µM), a low limit of detection (0.12 nM), and an excellent selectivity. This highly sensitive and ultralow fouling electrochemical sensor was fabricated via simple preparation with concise components that avoid the accumulation of layers with single functional material and complex activation processes. This ultralow fouling and highly sensitive strategy based on the gold nanoparticles-peptide hydrogel with a three-dimensional nanonetwork offers a solution to the current situation of various low-fouling sensing systems facing impaired sensitivity and provides a potential path for the practical application of electrochemical sensors.

Nanotechnology advances towards development of targeted-treatment for obesity.

Obesity through its association with type 2 diabetes (T2D), cancer and cardiovascular diseases (CVDs), poses a serious health threat, as these diseases contribute to high mortality rates. Pharmacotherapy alone or in combination with either lifestyle modification or surgery, is reliable in maintaining a healthy body weight, and preventing progression to obesity-induced diseases. However, the anti-obesity drugs are limited by non-specificity and unsustainable weight loss effects. As such, novel and improved approaches for treatment of obesity are urgently needed. Nanotechnology-based therapies are investigated as an alternative strategy that can treat obesity and be able to overcome the drawbacks associated with conventional therapies. The review presents three nanotechnology-based anti-obesity strategies that target the white adipose tissues (WATs) and its vasculature for the reversal of obesity. These include inhibition of angiogenesis in the WATs, transformation of WATs to brown adipose tissues (BATs), and photothermal lipolysis of WATs. Compared to conventional therapy, the targeted-nanosystems have high tolerability, reduced side effects, and enhanced efficacy. These effects are reproducible using various nanocarriers (liposomes, polymeric and gold nanoparticles), thus providing a proof of concept that targeted nanotherapy can be a feasible strategy that can combat obesity and prevent its comorbidities.

Copolymer Brush-Based Ultralow-Fouling Biorecognition Surface Platform for Food Safety.

Functional polymer coatings that combine the ability to resist nonspecific fouling from complex media with high biorecognition element (BRE) immobilization capacity represent an emerging class of new functional materials for a number of bioanalytical and biosensor technologies for medical diagnostics, security, and food safety. Here, we report on a random copolymer brush surface - poly(CBMAA-ran-HPMAA) - providing high BRE immobilization capacity while simultaneously exhibiting ultralow-fouling behavior in complex food media. We demonstrate that both the functionalization and fouling resistance capabilities of such copolymer brushes can be tuned by changing the surface contents of the two monomer units: nonionic N-(2-hydroxypropyl) methacrylamide (HPMAA) and carboxy-functional zwitterionic carboxybetaine methacrylamide (CBMAA). It is demonstrated that the resistance to fouling decreases with the surface content of CBMAA; poly(CBMAA-ran-HPMAA) brushes with CBMAA molar content up to 15 mol % maintain excellent resistance to fouling from a variety of homogenized foods (hamburger, cucumber, milk, and lettuce) even after covalent attachment of BREs to carboxy groups of CBMAA. The poly(CBMAA 15 mol %-ran-HPMAA) brushes functionalized with antibodies are demonstrated to exhibit fouling resistance from food samples by up to 3 orders of magnitude better when compared with the widely used low-fouling carboxy-functional oligo(ethylene glycol) (OEG)-based alkanethiolate self-assembled monolayers (AT SAMs) and, furthermore, by up to 2 orders of magnitude better when compared with the most successful ultralow-fouling biorecognition coatings - poly(carboxybetaine acrylamide), poly(CBAA). When model SPR detections of food-borne bacterial pathogens in homogenized foods are used, it is also demonstrated that the antibody-functionalized poly(CBMAA 15 mol %-ran-HPMAA) brush exhibits superior biorecognition properties over the poly(CBAA).

3D Printed Programmable Release Capsules.

The development of methods for achieving precise spatiotemporal control over chemical and biomolecular gradients could enable significant advances in areas such as synthetic tissue engineering, biotic-abiotic interfaces, and bionanotechnology. Living organisms guide tissue development through highly orchestrated gradients of biomolecules that direct cell growth, migration, and differentiation. While numerous methods have been developed to manipulate and implement biomolecular gradients, integrating gradients into multiplexed, three-dimensional (3D) matrices remains a critical challenge. Here we present a method to 3D print stimuli-responsive core/shell capsules for programmable release of multiplexed gradients within hydrogel matrices. These capsules are composed of an aqueous core, which can be formulated to maintain the activity of payload biomolecules, and a poly(lactic-co-glycolic) acid (PLGA, an FDA approved polymer) shell. Importantly, the shell can be loaded with plasmonic gold nanorods (AuNRs), which permits selective rupturing of the capsule when irradiated with a laser wavelength specifically determined by the lengths of the nanorods. This precise control over space, time, and selectivity allows for the ability to pattern 2D and 3D multiplexed arrays of enzyme-loaded capsules along with tunable laser-triggered rupture and release of active enzymes into a hydrogel ambient. The advantages of this 3D printing-based method include (1) highly monodisperse capsules, (2) efficient encapsulation of biomolecular payloads, (3) precise spatial patterning of capsule arrays, (4) "on the fly" programmable reconfiguration of gradients, and (5) versatility for incorporation in hierarchical architectures. Indeed, 3D printing of programmable release capsules may represent a powerful new tool to enable spatiotemporal control over biomolecular gradients.

A Multinuclear Metal Complex Based DNase-Mimetic Artificial Enzyme: Matrix Cleavage for Combating Bacterial Biofilms.

Extracellular DNA (eDNA) is an essential structural component during biofilm formation, including initial bacterial adhesion, subsequent development, and final maturation. Herein, the construction of a DNase-mimetic artificial enzyme (DMAE) for anti-biofilm applications is described. By confining passivated gold nanoparticles with multiple cerium(IV) complexes on the surface of colloidal magnetic Fe3 O4 /SiO2 core/shell particles, a robust and recoverable artificial enzyme with DNase-like activity was obtained, which exhibited high cleavage ability towards both model substrates and eDNA. Compared to the high environmental sensitivity of natural DNase in anti-biofilm applications, DMAE exhibited a much better operational stability and easier recoverability. When DMAE was coated on substratum surfaces, biofilm formation was inhibited for prolonged periods of time, and the DMAE excelled in the dispersion of established biofilms of various ages. Finally, the presence of DMAE remarkably potentiated the efficiency of traditional antibiotics to kill biofilm-encased bacteria and eradiate biofilms.

Pretreatment of cyanided tailings by catalytic ozonation with Mn2+/O3.

The increasing amount of cyanided tailings produced as a by-product has gained significant attention in recent years because of the rapid development of the gold industry and extensive exploitation of gold mineral resources. The effective use of these secondary resources is becoming an important and urgent problem for all environmental protection staff. Manganese-catalyzed ozonation for the pre-oxidation of cyanided tailings was studied and the effects of Mn2+ dosage, initial sulfuric acid concentration, ozone volume flow, temperature and agitation speed on pretreatment were examined. The optimum reaction conditions were observed to be: ore pulp density 2.5%, agitation speed 700 r/min, temperature 60°C, Mn2+ dosage 40 g/L, ozone volume flow 80 L/hr, initial sulfuric acid concentration 1 mol/L, and reaction time 6 hr. Under these conditions, the leaching rate of Fe and weight loss could reach 94.85% and 48.89% respectively. The leaching process of cyanided tailings by Mn2+/O3 was analyzed, and it was found that the leaching of pyrite depends on synergetic oxidation by high-valent manganese and O3, in which the former played an important part.

Theoretical insight into the promotion effect of potassium additive on the water-gas shift reaction over low-coordinated Au catalysts.

CONTEXT: How to elucidate the effect of alkali metal promoters on gold-catalyzed water-gas shift reaction intrinsically remains a challenging, because that the complex synergy effects such as strong metal-support interactions, interfacial effects, and charge transfer of supported metal catalysts makes people difficulty in the understanding the alkali promotion phenomenon in nature. Herein, we report a systematically study of whole water-gas shift reaction mechanism on pure and the K-modified defected-Au(211) (i.e., by removing one surface Au atom from perfect Au(211) and make one model with the Au-Au coordination number is six) by using the microkinetic modeling based on first principles. Our results indicate that the presence of K can increase the adsorption ability of oxygen-containing species via the attractive coulomb interaction, has no significant effect on the adsorption of H species, but inhibits the adsorption of CO due to the steric effect. K promoter stabilizes the water adsorption by ~0.3 eV, which results in one order increasing of whole reaction rate. Interestingly, the strong promotion effect of the K can be assigned to the significant direct space interaction between K and the adsorbate H2O* through the inducted electric field, which can be further confirmed by the posed negative electric field on the unpromoted D-Au(211). Microkinetic modeling results revealed that the carboxyl mechanism is the most likely to occur, redox mechanism is the next one, and the formate mechanism is the least likely to occur. For different kinds of alkali metal additives, the adsorption strength of water molecules gradually weakens from Li to Cs, but Na shows the best promoter behavior at the low temperature. By considering the effect of K contents on the reactivity of water-gas shift reaction, we found that the K with the medium coverage (~0.2~0.3 ML) has the strongest promoting effect. It is expected that the conclusion of this work can be extended to other WGSR catalytic systems like Cu(or Pt). METHODS: All calculations were performed by using the plane-wave based periodic method implemented in Vienna ab initio simulation package (VASP, version 5.4.4), where the ionic cores are described by the projector augmented wave (PAW) method. The exchange and correlation energies were computed using the Perdew, Burke and Ernzerhof functional with the vdw correction (PBE-D3). The transition states (TSs) were searched using the climbing image nudged elastic band (CI-NEB) method. Some electronic structure properties like work function was predicated by the DS-PAW software. Microkinetic simulation was carried out using MKMCXX software.

Nonfouling poly(ethylene oxide) layers end-tethered to polydopamine.

Nonfouling surfaces capable of reducing protein adsorption are highly desirable in a wide range of applications. Coating of surfaces with poly(ethylene oxide) (PEO), a water-soluble, nontoxic, and nonimmunogenic polymer, is most frequently used to reduce nonspecific protein adsorption. Here we show how to prepare dense PEO brushes on virtually any substrate by tethering PEO to polydopamine (PDA)-modified surfaces. The chain lengths of hetero-bifunctional PEOs were varied in the range of 45-500 oxyethylene units (M(n) = 2000-20,000). End-tethering of PEO chains was performed through amine and thiol headgroups from reactive polymer melts to minimize excluded volume effects. Surface plasmon resonance (SPR) was applied to investigate the adsorption of model protein solutions and complex biologic medium (human blood plasma) to the densely packed PEO brushes. The level of protein adsorption of human serum albumin and fibrinogen solutions was below the detection limit of the SPR measurements for all PEO chains end-tethered to PDA, thus exceeding the protein resistance of PEO layers tethered directly on gold. It was found that the surface resistance to adsorption of lysozyme and human blood plasma increased with increasing length and brush character of the PEO chains end-tethered to PDA with a similar or better resistance in comparison to PEO layers on gold. Furthermore, the chain density, thickness, swelling, and conformation of PEO layers were determined using spectroscopic ellipsometry (SE), dynamic water contact angle (DCA) measurements, infrared reflection-absorption spectroscopy (IRRAS), and vibrational sum-frequency-generation (VSFG) spectroscopy, the latter in air and water.

Interfacial tension analysis of oligo(ethylene glycol)-terminated self-assembled monolayers and their resistance to bacterial attachment.

The fouling resistance of oligo(ethylene glycol) (OEG)-terminated self-assembled monolayers (SAMs) of alkanethiolates on gold has been well established. Although hydration of the OEG chains seems key to OEG-SAM resistance to macromolecular adsorption and cellular attachment, the details of how hydration prevents biofouling have been inferred largely through computational methods. Because OEG-SAMs of different lengths exhibit differing degrees of fouling resistance, the interactions between water and OEG-SAMs leading to fouling resistance can be deduced by comparing the properties of fouling and nonfouling OEG-SAMs. While all OEG-SAMs had similar water contact angles, contact angles taken with glycerol were able to individuate between different OEG-SAMs and between fouling and nonfouling OEG-SAMs. Subsequent estimation of surface and interfacial tension using a colloidal model showed that nonfouling surfaces are associated with an increased negative interfacial tension between those OEG-SAMs that resisted attachment and water. Further analysis of this interfacial tension experimentally confirmed current mathematical models that cite OEG-water hydrogen-bond formation as a driving force behind short-term fouling resistance. Finally, we found a correlation between solid-water interfacial tension and packing density and molecular density of ethylene glycol.

Investigation of formaldehyde oxidation over Co3O4-Ce2 and Au/Co3O4-CeO2 catalysts at room temperature: effective removal and determination of reaction mechanism.

Formaldehyde is regarded as the major indoor pollutant emitted from widely used building and decorative materials in airtight buildings, which should be eliminated under indoor environmental conditions. We report here catalytic oxidation process of formaldehyde over mesoporous Co(3)O(4), Co(3)O(4)-CeO(2), Au/Co(3)O(4), and Au/Co(3)O(4)-CeO(2) catalysts and their excellent catalytic performances at room temperature. These catalysts were prepared by a "nanocasting" method with the mesostructure generated from SBA-15 silica with 2D structure. The adsorbed surface species in the formaldehyde oxidation process are analyzed, and some key steps in the oxidation pathway, active sites, and intermediate species are proposed. Among the detected species, some kinds of formate species formed on the catalysts were indentified as intermediates, which further transformed into bicarbonate or carbonate and which decomposed to carbon dioxide. The role of the mesoporous Co(3)O(4) and the gold nanoparticles in the mechanism are also revealed.

Development and application of photoconversion fluoropolymer films for greenhouses located at high or polar latitudes.

To convert and store energy in the process of photosynthesis, plants primarily use quanta of the red and blue parts of the spectrum. At high latitudes, the average daily intensity of red and blue parts of the spectrum is not very high; for many crops cultivated under greenhouse conditions, it reaches the sufficient level only on clear summer days. The problem of insufficient illumination in greenhouses is usually solved with artificial light sources. This article describes a technology for the manufacture of photoconversion fluoropolymer films for greenhouses. The fluoropolymer films described in the paper make use of original gold nanoparticles and nanoparticles with fluorescence in the blue or red region of the spectrum. In the polymer film, nanoparticles aggregate in the form of "beads", which enhances the field of the optical wave. The film photoconverts UV and violet light into blue and red light. Gold nanoparticles also partially convert energy in the green region of the spectrum (not used by plants) into heat, which is also important for agriculture at high latitudes. In addition, impregnation of gold nanoparticles into fluoropolymer significantly increases the lifetime of the film. The films described in the paper can significantly increase the productivity of greenhouses located at high latitudes. Plants cultivated under the films have more chlorophyll and a higher intensity of photosynthesis - although their system of distance stress signals is, to a certain degree, suppressed.

Effect of Dipole Orientation in Mixed, Charge-Equilibrated Self-assembled Monolayers on Protein Adsorption and Marine Biofouling.

While zwitterionic interfaces are known for their excellent low-fouling properties, the underlying molecular principles are still under debate. In particular, the role of the zwitterion orientation at the interface has been discussed recently. For elucidation of the effect of this parameter, self-assembled monolayers (SAMs) on gold were prepared from stoichiometric mixtures of oppositely charged alkyl thiols bearing either a quaternary ammonium or a carboxylate moiety. The alkyl chain length of the cationic component (11-mercaptoundecyl)-N,N,N-trimethylammonium, which controls the distance of the positively charged end group from the substrate's surface, was kept constant. In contrast, the anionic component and, correspondingly, the distance of the negatively charged carboxylate groups from the surface was varied by changing the alkyl chain length in the thiol molecules from 7 (8-mercaptooctanoic acid) to 11 (12-mercaptododecanoic acid) to 15 (16-mercaptohexadecanoic acid). In this way, the charge neutrality of the coating was maintained, but the charged groups exposed at the interface to water were varied, and thus, the orientation of the dipoles in the SAMs was altered. In model biofouling studies, protein adsorption, diatom accumulation, and the settlement of zoospores were all affected by the altered charge distribution. This demonstrates the importance of the dipole orientation in mixed-charged SAMs for their inertness to nonspecific protein adsorption and the accumulation of marine organisms. Overall, biofouling was lowest when both the anionic and the cationic groups were placed at the same distance from the substrate's surface.

Local Crack-Programmed Gold Nanowire Electronic Skin Tattoos for In-Plane Multisensor Integration.

Sensitive, specific, yet multifunctional tattoo-like electronics are ideal wearable systems for "any time, any where" health monitoring because they can virtually become parts of the human skin, offering a burdenless "unfeelable" wearing experience. A skin-like, multifunctional electronic tattoo made entirely from gold using a standing enokitake-mushroom-like vertically aligned nanowire membrane in conjunction with a programmable local cracking technology is reported. Unlike previous multifunctional systems, only a single material type is needed for the integrated gold circuits involved in interconnects and multiplexed specific sensors, thereby avoiding the use of complex multimaterials interfaces. This is possiblebecause the programmable local cracking technology allows for the arbitrary fine-tuning of the properties of elastic gold conductors from strain-insensitive to highly strain-sensitive simply by adjusting localized crack size, shape, and orientations-a capability impossible to achieve with previous bulk cracking technology. Furthermore, in-plane integration of strain/pressure sensors, anisotropic orientation-specific sensors, strain-insensitive stretchable interconnects, temperature sensors, glucose sensors, and lactate sensors without the need of soldering or gluing are demonstrated. This strategy opens a new general route for the design of next-generation wearable electronic tattoos.

One-pot facile synthesis of silk sericin-capped gold nanoparticles by UVC radiation: Investigation of stability, biocompatibility, and antibacterial activity.

Herein, an easy one-pot synthesis method for gold nanoparticles (AuNPs), involving only gold salt and sericin extracted from silkworm cocoon in the presence of ultraviolet C (UVC) radiation, was developed. Nanoparticle formation was confirmed by characteristic surface plasmon resonance peaks at 520-540 nm wavelengths, and the influence of silk sericin on enhancing the colloidal stability of AuNPs was confirmed. Transmission electron microscopy examination showed the average size (<10 nm) and size distribution decreased significantly with higher sericin concentration. No antibacterial activity was observed on Gram-positive Bacillus subtilis or Gram-negative Escherichia coli for sole AuNPs (0.065-0.26 mg/ml), but the conjugation of AuNPs with streptomycin antibiotic decreased significantly the required minimum inhibitory concentration doses, as also confirmed with agar plating, Scanning Electron Microscopy and Atomic Force Microscopy analyses. Furthermore, sericin-capped AuNPs showed high cell viabilities (>100%) and no sign of any detectable apoptosis or necrosis in 1-day incubation. Also, high real-time cell proliferation results of AuNPs competitive with positive control groups implied excellent in vitro biocompatibility. These results evidenced that sericin enhanced the colloidal stability of AuNPs and the biological activities of sericin-capped AuNPs reported here could render them suitable nanoscale vehicles for biomedical applications.

Dissolved organic matter distribution and its association with colloidal aluminum and iron in the Selenga River Basin from Ulaanbaatar to Lake Baikal.

The Selenga River Basin (Mongolia and Russia) has suffered from heavy metal contamination by placer gold mining and urban activities in recent decades. The objectives of this study were to provide the first distribution data of dissolved organic matter (DOM) and humic substances (HS) in this data-scarce region, and to investigate their association with dissolved and colloidal metals. Two sampling campaigns were conducted in August of 2013 and 2014. A constant proportion of HS (%HS; coefficient of variation of 2%) was observed from the headwater of Tuul River to the end of the delta before Lake Baikal, spanning > 1000 km in distance. The relationships were determined as [HS] = 0.643 × [DOM] (R2 = 0.996, P < 0.001), and this value (%HS = 64.3) is recommended as an input parameter for metal speciation modeling based on samples collected from the rivers. The DOM and metal (Al and Fe) concentrations in samples doubled through the Zaamar Goldfield mining area, but the influence was mitigated by mixing with the larger Orkhon River, which has better water quality. Metals were mainly present as colloids and had a strong positive correlation with DOM (Al r = 0.81, P < 0.01; Fe r = 0.61, P < 0.01), suggesting that DOM sustains colloidal Al and Fe in solution and they are co-transported in the Selenga River Basin. Land use changes affect water quality and metal speciation and therefore have major implications for the fate of metals.

Efficient prevention of nanomaterials transport in the porous media by treatment with polyelectrolytes.

Contamination of soil by engineered nanomaterials (ENM) is an emergent environmental problem that urges the development of robust treatment protocols to prevent ENM transport through soil. We developed a method for efficient entrapment and retention of ENM in solid porous media of quartz sand with grain size of 300-500 µm used as a simple model of soil and studied the transport properties of multi-walled carbon nanotubes, fullerenes, silica and gold nanoparticles through the sand-packed column by UV-vis and fluorescent spectroscopy. The treatment of ENM-contaminated porous media with a mixture of oppositely charged polyelectrolytes, cationic poly(diallyldimethylammonium chloride) and anionic poly(acrylic acid) sodium salt, dissolved in NaCl solution followed by dilution in the column results in strong electrostatic interaction between the polyelectrolytes and a formation of inter-polyelectrolyte complexes (IPEC) that induce flocculation of ENM and adsorption to the surface of sand. The method demonstrates excellent ENM entrapment efficiency (>90%) and high capacity of several grams of ENM per 1 g of polyelectrolytes. The IPEC network formed after the treatment also serves as an efficient protection barrier for newly added ENM contaminants. The method is universal for various types of ENM (carbon ENM, metal and oxide nanoparticles) and equally efficient for distilled water, tap water, or lake water eluents.

Nanocomposite Au NP/TiO2 thin film in the efficient remediation of aqueous solutions contaminated with emerging micro-pollutants.

The present communication specifically aims to synthesize novel nanocomposite material Au NPs/TiO2 in a simple template process using the polyethylene glycol as filler media. The thin film of the nanocomposite material was characterized by the advanced analytical tools. The surface morphology was obtained by the scanning electron microscopic (SEM) and transmission electron microscopic (TEM) images of solids. Similarly, the surface topography and roughness of solid were obtained by the atomic force microscopic (AFM) image of thin film. X-ray diffraction (XRD) data enabled to confirm that the TiO2 was predominantly present with its anatase phase. The specific surface area and pore size of the solid were obtained using the N2 adsorption/desorption data. Nanocomposite Au NP/TiO2 thin film was employed in the photocatalytic removal of sulfamethoxazole and triclosan from aqueous solutions using less harmful UV-A light (λmax = 330 nm). Various physicochemical parametric studies enabled to deduce the mechanism involved in the degradation process. The degradation kinetics as a function of pH (pH 4.0-10.0) and micro-pollutant concentrations (0.5-15.0 mg/L) was extensively studied. The mineralization of these pollutants was obtained using the non-purgeable organic carbon (NPOC) data. The stability of thin film was assessed by the repeated operations, and presence of several co-existing ions simulates the studies to real matrix treatment. Further, the presence of scavengers enabled to pin point the radical-induced degradation of sulfamethoxazole and triclosan from aqueous solutions.

Radiopaque Resorbable Inferior Vena Cava Filter Infused with Gold Nanoparticles.

Failure to remove a retrievable inferior vena cava (IVC) filter can cause severe complications with high treatment costs. Polydioxanone (PPDO) has been shown to be a good candidate material for resorbable IVC filters. However, PPDO is radioluscent under conventional imaging modalities. Thus, the positioning and integrity of these PPDO filters cannot be monitored by computed tomography (CT) or x-ray. Here we report the development of radiopaque PPDO IVC filters based on gold nanoparticles (AuNPs). Commercially available PPDO sutures were infused with AuNPs. Scanning electron microscopy analysis confirmed the presence of AuNP on the surface of PPDO. Micro-CT and x-ray images of the AuNP-infused PPDO sutures showed significant signal enhancement compared to untreated PPDO sutures. Elemental analysis showed that gold loading exceeded 2000 ppm. Tensile strength and in vitro cytotoxicity showed no significant difference between AuNP-infused and untreated PPDO. In a 10-week stability study, neither the gold content nor the radiopacity of the infused PPDO sutures significantly changed in the first 6 weeks. The increased attenuation of AuNP-infused PPDO sutures indicates their major advantage as a radiopaque resorbable filter material, as the radiopacity allows monitoring of the position and integrity of the filter, thereby increasing its safety and efficacy.

Phytonanotherapy for management of diabetes using green synthesis nanoparticles.

The world has a rich diversity of indigenous medicinal plants. The World Health Organization (WHO) gives high priority to eco-friendly, non-hazardous and cost effective healthcare such as the use of medicinal plants to treat various illnesses, including Human immunodeficiency virus (HIV) infection and Acquired immune deficiency syndrome (AIDS), tuberculosis (TB), diabetes mellitus (DM), malaria, and cancer. In developing countries, a high proportion of the population tends to use complementary and alternative medicines (CAM) together with conventional prescription drugs. Globally, CAM has been used in both developed and developing countries. In China, 30-50% of medicinal use is based on traditional alternative medicine. In Africa, it is estimated that 80% of primary health care is CAM, whilst in the USA, about 158 million people us CAM. This increase is due to three main influences: improve their eminence of life, relieve symptoms and preclude long-term complications. Despite the advances and advantages of conventional pharmaceutical medication, these are associated with long-term side effects and pose risks of inefficacy for treatment of chronic diseases such as cancer and DM. The biosynthesis of metal nanoparticles (NPs) using medicinal plants has received considerable attention as a proper alternative to using hazardous chemical and physical synthetic techniques. Plants are being exploited for their unique metal tolerance and effective production of gold metal NPs. A single medicinal plant contains an orchestra of chemical elements (e.g. proteins, vitamins, enzymes, amino acids, polysaccharides and organic compounds) that are "environmentally benign, yet chemically complex" and therefore serve as ideal tools for enhanced medicinal applications. It is reported that phytocompounds such as terpenoids, polysaccharides, polyols and flavones take part in the bio-reduction, stabilization and bio-capping mechanisms to form stable gold and silver NPs. Also the inhibitory potential of plant compounds against diabetic targets followed by a study of enzyme inhibitor kinetics, ligand binding dynamics supported by in silico docking studies that reveal the mode of bioactive compounds and their inhibitory activities. The present review focuses on the potential anticancer, antidiabetic and antimicrobial activity of phyto-synthesized gold and silver NPs. In phytonanotherapy, synergistic features of plant and metal NPs are unique as they offer healing properties that may be the clinical bioequivalent to many synthetic drugs, with minimal side effects. This could provide alternative treatment for chronic diseases that is efficient to overcome the disadvantages of synthetic monotherapy and allows medicinal plant therapy to co-exist with current synthetic treatments. This creates a much needed paradigm shift for further clinical studies in non-communicable and communicable diseases.