Toxicity and organic content characterization of olive oil mill wastewater undergoing a sequential treatment with fungi and photo-Fenton oxidation.

Olive oil mill wastewater (OOMW) is responsible for serious environmental problems. In this study, the efficiency of two treatments involving fungi and photo-Fenton oxidation, sequentially applied to OOMW was analyzed for organic compounds degradation and toxicity mitigation. The treatment with fungi (especially Pleurotus sajor caju) of diluted OOMW samples promoted a reduction of their acute toxicity to Daphnia longispina. Although this fungi species have not induced significant color reduction it was responsible for 72,91 and 77% reductions in chemical oxygen demand (COD), total phenolic and organic compound contents. After biological treatment, photo-Fenton oxidation seemed to be an interesting solution, especially for color reduction. However, the OOMWs remained highly toxic after photo-Fenton oxidation. Considering the second sequence of treatments, namely photo-Fenton oxidation followed by biological treatment, the former revealed, once more, a great potential because it can be applied to non-diluted OOMW, with significant reductions in COD (53-76%), total phenolic content (81-92%) and organic compounds content (100%). Despite fungal species still have demonstrated a high capacity for bioaccumulation of organic compounds, resulting from photo-Fenton oxidation, the biological treatment did not cause substantial benefits in terms of COD, total phenolic content and toxicity reduction.

Visible-light detoxification and charge generation by transition metal chloride modified titania.

Amorphous microporous metal oxides of titanium (AMM-Ti) modified with chlorides of PtIV, IrIV, RhIII, AuIII, PdII, CoII, and NiII have been prepared by the sol-gel method and characterized by various surface analytical methods. These hybrid AMM-Ti powders are catalysts for the photodegradation of 4-chlorophenol (4-CP) in aqueous solution when illuminated with visible (lambda > or = 400 or 455 nm) or UV (lambda > or = 335 nm) light. The initial rate depends on the dopant level and is highest at 3.0% Pt in the case of PtIV/AMM-Ti. When employed in a photoelectrochemical cell, the activity spectrum of the photocurrent extends downward to about 600 nm, as does the photodegradation of 4-CP. It is suggested that the metal salt acts as a redox-active chromophore, transmitting the photogenerated charges to the amorphous matrix.