Mini-Open Dumps in the Paraná River Floodplain: Local Problems with Global Effects.

The growing production of urban solid waste is a structural problem faced by most cities around the world. The proliferation of mini-open dumps (MOD; small spontaneous open-air waste dumps formed in urban and peri-urban areas) on the banks of the Paraná River is particularly evident. During the historical drought (June-December 2021), we carried out sampling campaigns identifying MODs of the Santa Fe River, a secondary channel of the Paraná River. MOD were geolocated, measured, described and classified by origin. The distance to the river and other sensitive places was considered (houses-schools-health facilities). Our results suggested a serious environmental issue associated with poor waste management. MOD were extremely abundant in the study area, being mostly composed of domestic litter. Plastics clearly dominated the MOD composition. Burning was frequently observed as a method to reduce the volume of MOD. We concluded that the proliferation of MOD is a multi-causal problem associated with a failure of public policies and a lack of environmental education.

Quantifying the effect of socio-economic-geo drivers on the change of municipal waste disposal in China by an integrated TWFE-PRF-SDM methodology.

Municipal solid waste management and disposal in China have significantly evolved since 2000. Due to China's vast land area and significant socioeconomic and geographic disparities, nationwide waste management strategies need to be further evaluated. This study quantified the effect of social, economic, and geographic drivers on municipal waste disposal activities in 31 provincial-level administrative regions from 2003 to 2020, by establishing a methodology integrated by two-way fixed effects regression model, panel random forest, and spatial Durbin model. The results showed, in the past two decades, socio-economic-geo indicators significantly co-decided the landfill and incineration activities. In particular, the explanatory ability of GDP per capita was above 45%, while land resources and city size also showed great significance. Spatial autocorrelation analysis showed that the relationship between landfill/incineration rates and socio-economic-geo drivers changed notably from unobvious to significant with economic growth. Furthermore, the local economy and land resources displayed more impact than those of the neighboring regions, while sci-tech and education showed clear spatial spillover effects. Chinese government would carefully assess the full-scale promotion policy of incineration plants, landfill is still hold as a reasonable option for regions with specific socio-economic-geo conditions.

A review of the applicability of Environmental Management Systems in waste management in the medical sector of Zimbabwe.

Environmental Management Systems (EMS) are currently the cornerstone of achieving sustainability globally. Nevertheless, the question is applicability of EMS in the medical sector. Hence, the review focused on applicability of EMS in medical waste management Zimbabwe. EMS involves overall processes that facilitate reduction of dire impacts of company's activities while increasing performance. EMS framework consists of environmental policy, planning, implementation, checking, review and improvement stages. To examine applicability of EMS in management of medical sector waste, published secondary sources with information related to the topic were utilised. Analysis of strengths and opportunities of EMS was used as a base to examine its applicability in medical waste management. Zimbabwean medical sector consist of hospitals and primary healthcare facilities. Medical waste includes pathological, pharmaceutical, cytotoxic, radioactive, chemical, sharp, infectious and general waste. However, twenty-first century witnessed expansion of medical institutions to accommodate COVID-19 patients, resulting in generation of construction and demotion waste. Medical institutions in Zimbabwe are accountable for solid waste management at generation source although municipalities are responsible for conveying solid waste to landfills. Solid waste from medical sector is disposed through traditional strategies namely landfilling, incineration, open pits and open burning, resulting in water, air, and soil contamination. However, EMS can reduce quantity of solid waste disposed through waste reuse, recycle and recovery. Moreover, achievement of integrated approach, effective legislation, policies and inclusive participation in medical waste management is adopted through use of EMS. Therefore, EMS were utilised to develop an integrated sustainable medical waste management model to achieve sustainability.

Emission characteristics and impact factors of air pollutants from municipal solid waste incineration in Shanghai, China.

The emission of air pollutants from the municipal solid waste (MSW) incineration is one of the major concerns in air pollution. The up-to-date emission situation for Chinese MSW incineration is largely unknown. The emission factors (EFs) are the key parameters to estimate the emissions from MSW incineration. The localized EFs from MSW incineration in Shanghai, China were established using continuous emission monitoring system data from 2017 to 2019. Our results showed that the EFs were 9.80 g t-1 of PM, 46.62 g t-1 of SO2, 812.68 g t-1 of NOx, 25.84 g t-1 of CO, and 17.49 g t-1 of HCl for the period 2017-2019, nearly 1.7-24.2 times lower than those in 2010, implying that the current EFs should be updated to avoid overestimation of MSW emissions in China. Compared with 2010, the emissions of PM, SO2, CO, and HCl in 2019 were significantly reduced by 84%, 69%, 47%, and 72%, respectively, except for NOx with a 106% increase, although the corresponding MSW incineration amount increased by 356%. The current levels of air pollutants from MSW incineration have already met the current national emission standard as well as the stricter standard of the European Union (98.87%-99.91%). Our findings suggest that China should update the current standards of MSW incineration, which can be a benefit for the prevention and control of MSW incineration in the future. It is still challenging to control NOx emissions from MSW incineration for Shanghai and even greater China.

Application of a 'Recycling Exchange' instrument to compensate waste pickers in Brazil via a first payment for urban environmental services programme.

This article presents an approach to compensate waste pickers in the informal sector of Minas Gerais state, Brazil, via a Payment for Urban Environmental Services (PUES) instrument, called 'Recycling Exchange'. The aim is to evaluate the effects of this instrument on the amount of waste diverted from landfill and reintroduced into the production chain, and to increase recognition of waste pickers' contributions to the state's economy. It was found that the 'Recycling Exchange' met the fundamental objectives of a PUES: the double social and economic benefits of the social inclusion of waste pickers in the execution of the public policy for solid waste management, and inducing (in the case of glass), ensuring and stabilising (plastic and paper) continuity of the activity of selling recyclables in times of wide price fluctuations for these recyclables. The instrument enhanced the provision of this environmental service and the positive externalities associated with recycling.

Environmental policies for the treatment of waste generated by COVID-19: Text mining review.

The rapid transmission of COVID-19 has meant that all economic and human efforts have been focused on confronting it, ignoring environmental aspects whose consequences are causing adverse situations all over the planet. The saturation of the sanitary system and confinement measures have multiplied the waste generated, which implies the need to adapt environmental policies to this new situation caused by the pandemic. It is a review article whose objective was to identify the environmental policies that would facilitate an adequate treatment of the waste generated by the pandemic. It was proposed to analyse the current lines of research developed on this paradigm, applying the text mining methodology. A systematic review of 111 studies published in environmental journals indexed in the Web of Science was carried out. The results identified three areas of interest: knowledge of transmission routes, management of the massive generation of plastics and appropriate treatment of solid waste in extreme situations. Leaders are called upon to implement the contingency plans to sustainably alleviate the enormous waste burden caused by society's adaptation to the restrictions imposed by the pandemic. Specifically, innovation aimed at achieving the reuse of medical products, the promotion of the circular economy and educational campaigns to promote clean environments should be encouraged.

Environmental audits and process flow mapping to assess management of solid waste and wastewater from a healthcare facility: an Italian case study.

In Europe, there are an increasing number of policy and legislative drivers for a more sustainable approach to the management of natural resources as well as for the mitigation of environmental health risks. However, despite significant progress in recent years, there is still some way to go to achieve circularity of process, as well as risk mitigation within organisations. Using a case study of the Gardone Val Trompia hospital in northern Italy, this manuscript offers a novel holistic examination of strategies to enhance resource efficiency and environmental health within a key sector, i.e. the healthcare sector. Through the use of environmental audits and process flow mapping, trends in waste and wastewater arisings and the associated financial and environmental costs and risks were identified. Recommendations for developing more resource efficient approaches as well as mitigating the environmental and public health risks are suggested. These include strategies for improved resource efficiency (including reduction in the hazardous waste) and reduced environmental impacts during the containment, transport and treatment of the waste.

Determining the amount of waste plastics in the feed of Austrian waste-to-energy facilities.

Although thermal recovery of waste plastics is widely practiced in many European countries, reliable information on the amount of waste plastics in the feed of waste-to-energy plants is rare. In most cases the amount of plastics present in commingled waste, such as municipal solid waste, commercial, or industrial waste, is estimated based on a few waste sorting campaigns, which are of limited significance with regard to the characterisation of plastic flows. In the present study, an alternative approach, the so-called Balance Method, is used to determine the total amount of plastics thermally recovered in Austria's waste incineration facilities in 2014. The results indicate that the plastics content in the waste feed may vary considerably among different plants but also over time. Monthly averages determined range between 8 and 26 wt% of waste plastics. The study reveals an average waste plastics content in the feed of Austria's waste-to-energy plants of 16.5 wt%, which is considerably above findings from sorting campaigns conducted in Austria. In total, about 385 kt of waste plastics were thermally recovered in all Austrian waste-to-energy plants in 2014, which equals to 45 kg plastics cap-1. In addition, the amount of plastics co-combusted in industrial plants yields a total thermal utilisation rate of 70 kg cap-1 a-1 for Austria. This is significantly above published rates, for example, in Germany reported rates for 2013 are in the range of only 40 kg of waste plastics combusted per capita.

Heat supply from municipal solid waste incineration plants in Japan: Current situation and future challenges.

The use of waste-to-energy technology as part of a municipal solid waste management strategy could reduce the use of fossil fuels and contribute to prevention of global warming. In this study, we examined current heat and electricity production by incineration plants in Japan for external use. Herein, we discuss specific challenges to the promotion of heat utilisation and future municipal solid waste management strategies. We conducted a questionnaire survey to determine the actual conditions of heat production by incineration plants. From the survey results, information of about 498 incineration plants was extracted. When we investigated the relationship between heat production for external use and population density where incineration plants were located, we found that regions with a population density <1000 persons (km(2))(-1) produce <500 MJ t(-1) of heat. We also found that external use of such energy for factories, markets, and related use, was noted in cities with a population density of 2000 to 4000 persons (km(2))(-1). Several incineration plants have poor performance for heat production because there are few facilities near them to provide demand for the energy. This is the result of redundant capacity, and is reflected in the heat production performance. Given these results, we discussed future challenges to creating energy demand around incineration plants where there is presently none. We also examined the challenges involved in increasing heat supply beyond the present situation.

Application of stability indicators for the assessment of the degradation of residual household waste before landfilling.

In France, domestic waste production is estimated at c 350 kg year-1 per person and landfilling still represents a predominant way of municipal solid waste management, with 39% of waste dumped in 2007. Waste characterization campaigns were conducted at different stages of a mechanical-biological treatment process in order to evaluate its efficiency. Waste samples were sorted by size (>100 mm, <100-20 mm and <20 mm) in order to assess the opportunity for mechanical and aerobic degradation and to reduce the volume of waste landfilled. The monitoring of parameter characteristics of waste stabilization highlighted a decrease in both organic matter and oxidizable organic matter, and an increase in fine particles <20 mm. The respirometric index after 4 days performed on waste samples from the pre-treatment stage showed a decrease in the biological activity compared with the samples taken upstream in the process. The biochemical methane potential of the waste is above the German limit of acceptance in landfills. This intermediate phase of stabilization is confirmed by the results of the leaching tests and hydrophobic fractionation.

Gaseous emissions from management of solid waste: a systematic review.

The establishment of sustainable soil waste management practices implies minimizing their environmental losses associated with climate change (greenhouse gases: GHGs) and ecosystems acidification (ammonia: NH3 ). Although a number of management strategies for solid waste management have been investigated to quantify nitrogen (N) and carbon (C) losses in relation to varied environmental and operational conditions, their overall effect is still uncertain. In this context, we have analyzed the current scientific information through a systematic review. We quantified the response of GHG emissions, NH3 emissions, and total N losses to different solid waste management strategies (conventional solid storage, turned composting, forced aerated composting, covering, compaction, addition/substitution of bulking agents and the use of additives). Our study is based on a meta-analysis of 50 research articles involving 304 observations. Our results indicated that improving the structure of the pile (waste or manure heap) via addition or substitution of certain bulking agents significantly reduced nitrous oxide (N2 O) and methane (CH4 ) emissions by 53% and 71%, respectively. Turned composting systems, unlike forced aerated composted systems, showed potential for reducing GHGs (N2 O: 50% and CH4 : 71%). Bulking agents and both composting systems involved a certain degree of pollution swapping as they significantly promoted NH3 emissions by 35%, 54%, and 121% for bulking agents, turned and forced aerated composting, respectively. Strategies based on the restriction of O2 supply, such as covering or compaction, did not show significant effects on reducing GHGs but substantially decreased NH3 emissions by 61% and 54% for covering and compaction, respectively. The use of specific additives significantly reduced NH3 losses by 69%. Our meta-analysis suggested that there is enough evidence to refine future Intergovernmental Panel on Climate Change (IPCC) methodologies from solid waste, especially for solid waste composting practices. More holistic and integrated approaches are therefore required to develop more sustainable solid waste management systems.

Bisphenol A in Solid Waste Materials, Leachate Water, and Air Particles from Norwegian Waste-Handling Facilities: Presence and Partitioning Behavior.

The plastic additive bisphenol A (BPA) is commonly found in landfill leachate at levels exceeding acute toxicity benchmarks. To gain insight into the mechanisms controlling BPA emissions from waste and waste-handling facilities, a comprehensive field and laboratory campaign was conducted to quantify BPA in solid waste materials (glass, combustibles, vehicle fluff, waste electric and electronic equipment (WEEE), plastics, fly ash, bottom ash, and digestate), leachate water, and atmospheric dust from Norwegian sorting, incineration, and landfill facilities. Solid waste concentrations varied from below 0.002 mg/kg (fly ash) to 188 ± 125 mg/kg (plastics). A novel passive sampling method was developed to, for the first time, establish a set of waste-water partition coefficients, KD,waste, for BPA, and to quantify differences between total and freely dissolved concentrations in waste-facility leachate. Log-normalized KD,waste (L/kg) values were similar for all solid waste materials (from 2.4 to 3.1), excluding glass and metals, indicating BPA is readily leachable. Leachate concentrations were similar for landfills and WEEE/vehicle sorting facilities (from 0.7 to 200 µg/L) and dominated by the freely dissolved fraction, not bound to (plastic) colloids (agreeing with measured KD,waste values). Dust concentrations ranged from 2.3 to 50.7 mg/kgdust. Incineration appears to be an effective way to reduce BPA concentrations in solid waste, dust, and leachate.

Solid olive waste in environmental cleanup: enhanced nitrite ion removal by ZnCl2-activated carbon.

This communication describes how olive solid wastes can be used to prepare activated carbon (AC), with soundly high surface areas, suitable to remove nitrite ions from water. Solid olive wastes, so called Jeft, separated as unwanted bi-products from olive oil mills, have been converted into charcoal. The charcoal was then physically and/or chemically activated using different compounds namely conc. H3PO4 or ZnCl2. Charcoal carbonization was performed under inert atmosphere to avoid loss of heated carbon by oxidation with air. Surface area measurements and SEM micrographs showed that activation using ZnCl2 yields AC with highest surface area and more porous surfaces. The ZnCl2-activated carbon was then used to remove nitrite ions from water by adsorption. Effects of different parameters on value of surface area and adsorption capacity of the AC were investigated. Commercial AC materials were used as reference for comparison. The AC showed higher adsorption capacity toward nitrite than other reported adsorbents. The results suggest that using 5 g of the ZnCl2-activated carbon per liter of heavily nitrite-contaminated water (50 ppm) may bring the contaminant concentration down to the WHO accepted concentration limits within 60 min. This work highlights the future feasibility of using olive waste as feed stocks to produce useful renewable materials while keeping in mind the wisdom "make wastes work in environmental protection".

Opportunities and challenges in the use of coal fly ash for soil improvements--a review.

Coal fly ash (CFA), a by-product of coal combustion has been regarded as a problematic solid waste, mainly due to its potentially toxic trace elements, PTEs (e.g. Cd, Cr, Ni, Pb) and organic compounds (e.g. PCBs, PAHs) content. However, CFA is a useful source of essential plant nutrients (e.g. Ca, Mg, K, P, S, B, Fe, Cu and Zn). Uncontrolled land disposal of CFA is likely to cause undesirable changes in soil conditions, including contamination with PTEs, PAHs and PCBs. Prudent CFA land application offers considerable opportunities, particularly for nutrient supplementation, pH correction and ameliorating soil physical conditions (soil compaction, water retention and drainage). Since CFA contains little or no N and organic carbon, and CFA-borne P is not readily plant available, a mixture of CFA and manure or sewage sludge (SS) is better suited than CFA alone. Additionally, land application of such a mixture can mitigate the mobility of SS-borne PTEs, which is known to increase following cessation of SS application. Research analysis further shows that application of alkaline CFA with or without other amendments can help remediate at least marginally metal contaminated soils by immobilisation of mobile metal forms. CFA land application with SS or other source of organic carbon, N and P can help effectively reclaim/restore mining-affected lands. Given the variability in the nature and composition of CFA (pH, macro- and micro-nutrients) and that of soil (pH, texture and fertility), the choice of CFA (acidic or alkaline and its application rate) needs to consider the properties and problems of the soil. CFA can also be used as a low cost sorbent for the removal of organic and inorganic contaminants from wastewater streams; the disposal of spent CFA however can pose further challenges. Problems in CFA use as a soil amendment occur when it results in undesirable change in soil pH, imbalance in nutrient supply, boron toxicity in plants, excess supply of sulphate and PTEs. These problems, however, are usually associated with excess or inappropriate CFA applications. The levels of PAHs and PCBs in CFA are generally low; their effects on soil biota, uptake by plants and soil persistence, however, need to be assessed. In spite of this, co-application of CFA with manure or SS to land enhances its effectiveness in soil improvements.

Waste reduction and recycling initiatives in Japanese cities: lessons from Yokohama and Kamakura.

Waste reduction and recycling at the city level will acquire greater significance in the near future due to rising global volumes of waste. This paper seeks to identify policy-relevant drivers for successful promotion of waste reduction and recycling. Factors influencing the success of waste reduction and recycling campaigns are identified. Two case study cities in Japan which depict the successful use of the 3Rs (reduce, reuse and recycle) at the municipal level are presented. In these cases, the existence of incinerators, which are generally considered as disincentives for recycling, was not functioning as a disincentive but rather as an incentive for waste reduction. Owing to the high cost of incineration facilities, the movement to close incinerators has become a strong incentive for waste reduction and recycling in these two cities. The study suggests that careful consideration is necessary when making decisions concerning high-cost waste treatment facilities with high installation, maintenance and renewal outlays. In addition, intensive source separation and other municipal recycling initiatives have a high potential for producing positive results.

Developing a common framework for integrated solid waste management advances in Managua, Nicaragua.

This article describes the municipal solid waste management system in Managua, Nicaragua. It updates an initial profile developed by the authors for the 2010 UN-HABITAT publication Solid Waste Management in the World's Cities and applies the methodology developed in that publication. In recent years, the municipality of Managua has been the beneficiary of a range of international cooperation projects aimed at improving municipal solid waste management in the city. The article describes how these technical assistance and infrastructure investments have changed the municipal solid waste management panorama in the city and analyses the sustainability of these changes. The article concludes that by working closely with the municipal government, the UN-HABITAT project Strengthening Capacities for Solid Waste Management in Managua was able to unite these separate efforts and situate them within a strategic framework to guide the evolution of the municipal solid waste management system in the forthcoming years. The creation of this multi-stakeholder platform allowed for the implementation of joint activities and ensured coherence in the products generated by the different projects. This approach could be replicated in other cities and in other sectors with similar effect. Developing a long term vision was essential for the advancement of municipal solid waste management in the city. Nevertheless, plan implementation may still be undermined by the pressures of the short term municipal administrative government, which emphasize operational over strategic investment.

A system dynamics model and analytical hierarchy process: an integrated approach for achieving sustainable solid waste management system.

Waste management in low-income countries faces challenges with an average cost of $35/ton approximately 51% collection efficiency. Despite investments in treatment, processing, and recycling, the system remains unsustainable owing to poor planning and policies. The current analysis of Lahore's solid waste management (SWM) system, selected as a major city of a low-income country as a case study, focuses on collection efficiency and waste generation. However, it neglects the complex and dynamic nature of SWM systems. To capture the complexities and dynamic nature of the SWM system, system dynamic (SD) modeling is proposed for its effectiveness in modeling complex and dynamic systems. Unlike previous attempts at SD modeling that mostly consider only some components of the SWM system with varying success, this study attempts to use a holistic approach by considering all aspects of an integrated SWM system. In addition, this study explores different financial and management policies, highlighting the weaknesses of the system through a quantitative comparison of three scenarios: (1) business-as-usual (BAU) which considers the current trends in waste generation and practices of collection and disposal to landfill, (2) waste treatment system (WTS) in which various waste treatment systems are included to reduce burden on landfill, and (3) introduction of user fee with awareness campaigns (UFAC) which encourages community participation towards reduction in waste generation and financially supports the SWM. All three scenarios use four indices: waste generation, waste ending up in landfill, uncollected waste, and annual budget deficit as performance indices. These scenarios were simulated over a 25-year period using an SD model, covering all six components of the SWM system. The BAU scenario shows a 16% increase in waste generation, a 173% increase in landfill waste, an 11% reduction in uncollected waste, and a 64% increase in the budget deficit over the simulation period, indicating an unsustainable SWM system. The WTS scenario exhibits a 16% increase in waste generation, a 155% increase in landfill waste, an 11% reduction in uncollected waste, and a 61% increase in the budget deficit, showing a significant reduction in landfill waste and a slight reduction in deficit but it remains unsustainable. The UFAC scenario, however, results in a 40% reduction in waste generation, a 67% decrease in uncollected waste, an 8% decrease in landfill waste, and a 59% decrease in the budget deficit. These results demonstrate that instituting user fees for SWM services and incentivizing community participation towards waste reduction and segregation can make the SWM system of Lahore sustainable. This SD model provides insights for policymakers, aiding what-if analyses and long/short-term waste management plans for metropolitan cities in low-income countries. To validate the sustainability judgments based on performance indices, the analytical hierarchy process (AHP), a multi-criteria decision analysis (MCDA) tool commonly used for ranking policy decisions based on competing criteria, was employed. It considered the same four criteria as in the SD model. The results of the AHP analysis aligned with those of the SD model, ranking the UFAC scenario as the most sustainable option.

Odour reduction strategies for biosolids produced from a Western Australian wastewater treatment plant: results from Phase I laboratory trials.

This study investigated sources of odours from biosolids produced from a Western Australian wastewater treatment plant and examined possible strategies for odour reduction, specifically chemical additions and reduction of centrifuge speed on a laboratory scale. To identify the odorous compounds and assess the effectiveness of the odour reduction measures trialled in this study, headspace solid-phase microextraction gas chromatography-mass spectrometry (HS SPME-GC-MS) methods were developed. The target odour compounds included volatile sulphur compounds (e.g. dimethyl sulphide, dimethyl disulphide and dimethyl trisulphide) and other volatile organic compounds (e.g. toluene, ethylbenzene, styrene, p-cresol, indole and skatole). In our laboratory trials, aluminium sulphate added to anaerobically digested sludge prior to dewatering offered the best odour reduction strategy amongst the options that were investigated, resulting in approximately 40% reduction in the maximum concentration of the total volatile organic sulphur compounds, relative to control.

Carbon balance in municipal solid waste management--a case study of Nonthaburi municipality, Thailand.

OBJECTIVE: This research aimed to investigate the carbon equivalences associated with the unit processes of municipal solid waste management (MSWM) in Nonthaburi municipality. In addition, factors affecting MSWM's carbon-related activities were determined to find the reduction potential of carbon emissions into the atmosphere. MATERIAL AND METHOD: Afield survey was conducted to quantify the amount of resources used in MSWM. Then, they were evaluated in terms of carbon equivalences occurring in the process scheme and categorized into carbon emissions, fixation and reduction,following a carbon-balanced model. RESULTS: From carbon balance analysis of the base-line-scenario MSWM, the carbon emissions were found to be -2,374.56 MTCE/y, resulting in the average carbon unit of-22.98 kg CE/ton solid waste. The negative sign indicates a carbon reduction, instead of an emission,from this MSWM practice, which helps to reduce the concentration of carbon dioxide in the atmosphere. CONCLUSION: The results of the model reveal that the highest contribution to carbon reduction potential in MSWM is recycling. Accordingly, it is strongly recommended that a policy promoting reuse, recovery, and recycling be pursued in every step of MSWM to assist in, not only extending landfill service life span, but also alleviating the increasing global warming problems.