Combined orthodontic and surgical therapy for a deeply impacted third molar related with a dentigerous cyst.

The dentigerous cysts are the common cause that inhibits the eruption of the teeth. Large dentigerous cysts can cause pathological fractures in mandible. Temporary or permanent inferior alveolar and lingual nerve damage can occur associated with deeply impacted third molar surgery. We treated the dentigerous cyst arised from deeply impacted mandibular third molar with orthodontic extraction combined with the marsupialization therapy. This orthodontic-surgical procedure reduced the risk of nerve damage and pathological fracture of the mandible.

Determination of lingual vascular canals in the interforaminal region before implant surgery to prevent life-threatening bleeding complications.

OBJECTIVES: Profuse hemorrhage and airway obstruction may occur during or after the implant surgery in the interforaminal region. The prevention from this complication requires identifying the location of the mandibular lingual vascular canals (MLVCs). The purpose of this study was to evaluate the anatomical variations of MLVCs and to determine the safety margins for implant placement in interforaminal region. MATERIALS AND METHODS: Computer tomography (CT) images of 200 consecutive patients were reexamined retrospectively by a radiologist and a maxillofacial surgeon to evaluate the presence of the MLVCs entering the mandible. The diameter and the number of the canals, the distance between the entrance of the canal and mandibular midline, and the height of the entrances of the canals from the inferior mandibular margin were measured. RESULTS: Two hundred and thirty-six median lingual canals (MLCs) and 159 lateral lingual canals (LLCs) were found in 200 patients. Significant differences were found between the number of lingual canals in the midline and canine regions (P < 0.001). CONCLUSION: There is a potential risk of complications due to the injuries of the vessels entering the lingual cortical bone through a number of bone canals during implant placement in the interforaminal region.

Graft necrosis occurred after iliac crest reconstruction after mandibular segmental resection of ameloblastoma.

Ameloblastoma is an uncommon benign odontogenic neoplasm of the maxillofacial region constituting less than 1% of tumors of the oral cavity. Ameloblastomas have been categorized broadly into 3 biologic variants: cystic (unicystic), solid, and peripheral. Unicystic ameloblastoma is a rare and less aggressive variant of ameloblastoma. The aim of this report is to describe a case of cystic ameloblastoma treated with segmental resection and iliac graft reconstruction. The possible reasons of graft failure seen in our patient at the early stage of the healing were also discussed.

Comparison of lidocaine metabolism for different anesthesia techniques in rabbits with liver disease.

OBJECTIVE: This study was designed to investigate the serum lidocaine concentrations (SLC) after local infiltration anesthesia (IA) and mandibular anesthesias (MA) in rabbits with carbon tetrachloride (CCl4)-induced chronic liver damage (CLD). STUDY DESIGN: Fourteen rabbits were administered CCl4 in group 1, MA (CLD-MA; n = 7); in group 2, IA (CLD-IA; n = 7); in group 3, MA (H-MA; n = 7); and in group 4, IA (H-IA; n = 6) was performed. SLC were measured. RESULTS: SLC showed difference over time. At the 10th minute, mean SLC in IA groups were higher than in MA groups. At the 120th minute, the highest mean concentration was found in the CLD-IA group. CONCLUSIONS: SLC increases in CLD, and serum lidocaine concentration after IA in the mandibular anterior region is higher than it is after MA.

Assessment of the Effects of Curacel and Bone Wax on the Acute Oroantral Opening Site by means of Computer Tomography and Histopathology.

PURPOSE: In this study, the effects of Curacel TM oxidized regenerated cellulose and bone wax on the healing bone were compared to each other by means of CT based bone density measurement and histopathological evaluation. METHODS: The bone density measurements of the control group were significantly higher than those of both Curacel and bone wax groups. RESULTS: There was no significant difference between Curacel and bone wax. Histopathologically, the bone wax group showed more osteoblastic activation than Curacel group. For all measurement parameters (osteoblastic activation, osteoclastic activation, fibrous connective tissue, osseous trabeculae), Curacel and bone wax groups had worse results than control group. It is concluded that Curacel has no superiority over bone wax in terms of osseous healing in the oroantral region. There is no need to use oxidized regenerated cellulose or bone wax for small oroantral openings since the healing is better without any intervention. In addition, bone density measurement and histopathological evaluation were consistent in terms of osseous healing of the oroantral opening.

Maxillary sinus floor augmentation in patients with maxillary sinus pseudocyst: case report.

The maxillary sinus floor elevation procedure has gained popularity with predictable results, and is a safe, acceptable technique for bone augmentation, providing a base for dental implant treatment. Faint radiopaque lesions at the base of the maxillary sinus are frequent diagnoses on radiographs and must be identified during dental implant planning. Pseudocysts classically appear hemispheric, homogeneously opaque, and well delineated in panoramic and periapical radiographs. The great majority of these lesions are asymptomatic and do not require surgical treatment. In this case report, we present 4 patients who had a maxillary sinus floor elevation procedure using either crestal or lateral approaches in the presence of antral pseudocysts. No complications were encountered during follow-up periods in these patients and all implants are functioning successfully.

Development of a mandibular motion simulator for total joint replacement.

PURPOSE: The purpose of this study was to develop a motion simulator capable of recreating and recording the full range of mandibular motions in a cadaveric preparation for an intact temporomandibular joint (TMJ) and after total joint replacement. MATERIAL AND METHODS: A human cadaver head was used. Two sets of tracking balls were attached to the forehead and mandible, respectively. Computed tomographic (CT) scan was performed and 3-dimensional CT models of the skull were generated. The cadaver head was then dissected to attach the muscle activation cables and mounted onto the TMJ simulator. Realistic jaw motions were generated through the application of the following muscle forces: lateral pterygoid muscle, suprahyoid depressors (geniohyoid, mylohyoid, and digastric muscles), and elevator muscles. To simulate muscle contraction, cables were inserted into the mandible at the center area of each muscle's attachment. To provide a minimum mouth closing force at the initial position, the elevator muscles were combined at the anterior mandible. During mandibular movement, each motion was recorded using a high-resolution laser scanner. The right TMJ of the same head was reconstructed with a total TMJ prosthesis. The same forces were applied and the jaw motions were recorded again. CT scan was performed and 3-dimensional CT models of the skull with TMJ prosthesis were generated. RESULTS: Mandibular motions, before and after TMJ replacement, with and without lateral pterygoid muscle reattachment, were re-created in a cadaveric preparation. The laser-scanned data during the mandibular motion were used to drive 3-dimensional CT models. A movie for each mandibular motion was subsequently created for motion path analysis. Compared with mandibular motion before TMJ replacement, mandibular lateral and protrusive motions after TMJ replacement, with and without lateral pterygoid muscle reattachment, were greatly limited. The jaw motion recorded before total joint replacement was applied to the mandibular and prostheses models after total TMJ replacement. The condylar component was observed sinking into the fossa during jaw motion. CONCLUSION: A motion simulator capable of re-creating and recording full range of mandibular motions in a cadaveric preparation has been developed. It can be used to simulate mandibular motions for the intact TMJ and total joint prosthesis, and to re-create and record their full range of mandibular motions. In addition, the full range of the recorded motion can be re-created as motion images in a computer. These images can be used for motion path analysis and to study the causation of limited range of motion after total joint replacement and strategies for improvement.

Horizontal alveolar distraction of the mandibular canine regions for implant placement.

Horizontal alveolar augmentation by distraction osteogenesis is an alternative method for reconstructing atrophic alveolar bone. A 65-year-old woman with atrophy of the alveolar rim in the anterior lower jaw, which had inadequate width for implant placement, was presented. Under general anesthesia, vertical and horizontal osteotomies of the buccolabial cortical bone were performed in the canine regions bilaterally. Modified horizontal distraction devices were stabilized to the mandible. Distraction proceeded from the seventh postoperative day at a rate of 0.450 mm twice a day for 6 days. After 3 months, distraction osteogenesis occurred and increased the alveolar width from 2 to 7 mm. Two implants were placed in the distracted areas. Marginal bone resorbtion around the implants was not observed 12 months after implant placement.

Treatment of masseteric hypertrophy with botulinum toxin: a report of two cases.

Masseter muscle hypertrophy is a rare condition of unknown cause which is important in the differential diagnosis of head and neck masses, located in the cheek. Several treatment options reported for masseter hypertrophy, which range from simple pharmacotherapy to more invasive surgical reduction. Botulinum toxin type A is a powerful neurotoxin which is produced by the anaerobic organism Clostridium botulinum and when injected into a muscle causes interference with the neurotransmitter mechanism producing selective paralysis and subsequent atrophy of the muscle. Injection of botulinum toxin type A into the masseter muscle is generally considered a less invasive modality and has been advocated for cosmetic sculpting of the lower face. Botulinum toxin type A injection is considered to be a beneficial treatment modality in masseter muscle hypertrophy patients. The aim of this article is to report two cases of masseteric muscle hypertrophy which were treated with botulinum toxin type A injection. Marked changes in facial feature were achieved 3 months after the procedure.

Extrafollicular adenomatoid odontogenic tumor of the mandible: report of a case.

The purpose of this study was to report an extrafollicular adenomatoid odontogenic tumor in the mandibular anterior region in a patient. A 15 year-old female with a painless swelling in the mandibular anterior region was referred to our clinic. Fine needle aspiration yielded no fluid. Periapical, panoramic and computer tomography scans showed circumscribed radiolucent area with fine calcifications. The lesion was totally enucleated and the teeth 31, 32 were removed. The rarity of adenomatoid odontogenic tumor may be associated with its slowly growing pattern and symptomless behavior. Therefore, it should be distinguished from more common lesions of odontogenic origin in routine dental examinations.

A comparison of injection pain with articaine with adrenaline, prilocaine with phenylpressin and lidocaine with adrenaline.

OBJECTIVE: The objective of the present study was to investigate the pain on injection of articaine with adrenaline, prilocaine with phenylpressin , and lidocaine with adrenaline. STUDY DESIGN: The study sample was comprised of 497 consecutively seen patients received 497 maxillary buccal infiltration injections or inferior alveolar block injections of 4% articaine with 1:200.000 adrenaline, 3% prilocaine with 1.08 mcg phenylpressin, or 2% lidocaine with 1:100.000 adrenaline. Immediately after the injection, patients were asked to rate their injection pain on a six-point scale. RESULTS: There were no significant differences among the anesthetic solutions for injection pain. Patients usually reported mild or no injection pain for all of anesthetic administrations. CONCLUSION: Under the conditions of this study that lidocaine with adrenaline, articaine with adrenaline and prilocaine with phenylpressin seemed to be similar for pain on injection and they could be quite painless.

Fixation of vertically distracted segment with dental implants after breakage of distraction device: case report.

Distraction osteogenesis is an efficient method to augment the mandibular alveolar process for dental implants. Complications of this procedure include fracture of the basal bone, breakage of distractor, wound dehiscenses, undesirable soft tissue changes, and defective movement of the transported segment. We report a case of breakage of the distractor after mandibular alveolar vertical distraction osteogenesis. Mandibular alveolar vertical distraction osteogenesis was applied to 53-year-old woman for prosthetic rehabilitation. Fracture of the distraction device occurred on the 13th day of the activation phase. Radiographic examination revealed the fracture of the distractor rod and lingually displaced alveolar segment. Lingually displaced segment was successfully advanced to the desired position, and fixed to the basal bone using dental implants before the maturation of the distracted bone. We consider that this technique is eligible for the management of these kind of complications.

Cytokine and chemokine levels in radicular and residual cyst fluids.

BACKGROUND: Cytokines were thought to play an important role for the expansion of odontogenic cysts. The purpose of this study was to evaluate the cytokine and chemokine levels of radicular and residual cyst fluids. METHODS: Cyst fluids were aspirated from 21 patients (11 radicular and 10 residual cysts) and the levels of interleukin-1 alpha (IL-1alpha), tumor necrosis factor-alpha (TNF-alpha), monocyte chemotactic protein-1 (MCP-1), and regulated upon activation normal T cell expressed and secreted (RANTES) were determined by ELISA using commercially available kits. RESULTS: Both radicular and residual cyst fluids contained IL-1alpha, TNF-alpha, MCP-1, and RANTES, concentrations of which were significantly higher in the radicular cyst fluids than those in the residual cysts (P < 0.001 for IL-1alpha, TNF-alpha, and RANTES; P < 0.01 for MCP-1). Compared to the other mediators, the concentration of IL-1alpha was found to be highest in both of the cyst fluids. In addition, positive correlations were found between IL-1alpha, TNF-alpha, MCP-1, and RANTES in radicular and residual cyst fluids. CONCLUSION: If the radicular cyst is inadvertently left behind following tooth extraction, some degree of inflammation may carry on. Residual cysts, although to a lesser extend than radicular cysts, have the potential to expand.

Acute maxillary sinusitis associated with internal sinus lifting: report of a case.

Sinus floor augmentation (SFA) is one of the techniques that has been proposed for improving the long-term retention of dental implants. The procedure involves the creation of a submucoperiosteal pocket in the floor of the maxillary sinus for placement of a graft consisting of autogenous, allogenic, or alloplastic material. Complications of the SFA predominantly consist of disturbed wound healing, hematoma, sequestration of bone, and transient maxillary sinusitis. In this report, we presented an acute maxillary sinusitis complication following internal sinus lifting in a patient with chronic maxillary sinusitis.

Use of a Simple Appliance to Prevent Mucosal Irritation by the Distractor Rod during Vertical Distraction: Case Report.

Patient discomfort due to the excessive length of the distractor rod is one of the disadvantages of alveolar distraction osteogenesis. Although this seems to be a minor complication, it can cause severe mucosal irritation on the opposite arch, and uncontrolled forces can lead to the loosening of the screws and the inactivation of the distractor. The purpose of this case report is to introduce an acrylic appliance that is very useful in avoiding the mucosal irritation caused by the long distractor rod. The appliance is simple, effective, and easy to fabricate.

Biomechanical comparison of different plating techniques in repair of mandibular angle fractures.

OBJECTIVE: The purpose of this study was to evaluate the biomechanical behaviors of different miniplate fixation techniques for treatment of fractures of the mandibular angle. STUDY DESIGN: Twenty sheep hemimandibles were used to evaluate 4 different plating techniques. The groups were fixated with Champy technique, biplanar plate placement, monoplanar plate placement, and 3-dimensional (3D) curved angle strut plate. A custom-made 3-point biomechanical test model was used for the samples. Each group was tested with compression forces by an Instron Lloyd LRX machine. The biomechanical behavior of the groups for the forces (N) that caused displacement of 1.75 mm were compared using the Instron software program and displacement graphics. RESULTS: The variance analyses showed that biplanar plate placement had more favorable biomechanical behavior than Champy technique and monoplanar plate placement (P < .05). In addition, the 3D curved angle strut plate technique had more favorable biomechanical behavior than the Champy technique (P < .05) but was not significantly different from biplanar or monoplanar plate placement techniques (P > .05). CONCLUSION: The study demonstrated that 3D strut plates or dual miniplate techniques had greater resistance to compression loads than the Champy technique. In addition, biplanar plate orientation may provide a more favorable biomechanical behavior than monoplanar plate placement.

Biomechanical comparison of plating techniques for fractures of the mandibular condyle.

We compared the biomechanical behaviour of various rigid internal fixation techniques for treatment of fractures of the mandibular condylar process. Fifteen sheep hemimandibles were used to evaluate three bicortical plating techniques. A custom-made 3-point biomechanical test model was used for the samples. Each group was tested with compression forces by an Instron Lloyd LRX machine. The resistance to forces (N) that caused displacements of 1.75 and 3.50mm were compared using the Instron software programme and displacement graphics. There were no significant differences among the three groups for displacements of 1.75 and 3.50mm. Our study showed that the titanium miniadaptation plates, minicompression plates, and the absorbable miniplates did not differ significantly in their biomechanical behaviour.