Development of Optical-Based Molecularly Imprinted Nanosensors for Adenosine Detection.

Adenosine nucleoside is an important molecule in human physiology. The levels of adenosine nucleoside in urine and plasma are directly or indirectly related to diseases such as neurodegenerative diseases and cancer. In the present study, adenosine-imprinted and non-imprinted poly(2-hydroxyethyl methacrylate-methacrylic acid) (poly(HEMA-MAA)) surface plasmon resonance (SPR) nanosensors were prepared for the determination of adenosine nucleoside. First, MAA/adenosine pre-polymerization complexes were prepared at different molar ratios using adenosine as a template molecule and methacrylic acid (MAA) as a monomer, and SPR nanosensor surfaces were optimized by determining the highest imprinting factor of the chip surfaces. The surfaces of adenosine-imprinted and non-imprinted SPR nanosensors were characterized by using atomic force microscopy, ellipsometry, and contact angle measurements. Kinetic analyses were made with different concentrations in the range of 0.5-400.0 nM for the detection range with a pH 7.4 phosphate buffer solution. The limit of detection in adenosine aqueous solutions, artificial plasma, and artificial urine was determined to be 0.018, 0.015, and 0.013 nM, respectively. In the selectivity analysis of the developed nanosensors, the selectivity of adenosine SPR nanosensors in solutions at different concentrations was determined by using guanosine and cytidine nucleosides. The relative selectivity coefficients of adenosine-imprinted SPR nanosensors for adenosine/cytidine and adenosine/guanosine are 3.836 and 3.427, respectively. Since adenosine-imprinted SPR nanosensors are intended to be used in medical analysis and research, adenosine analysis has also been studied in artificial urine and artificial plasma samples.

Preparation of magnetic poly(ethylene glycol dimethacrylate-N-Methacryloyl-(L)-glutamic acid) particles for thrombin purification.

In this study, magnetic poly(ethylene glycol dimethacrylate-N-methacryloyl-(L)-glutamic acid) (mPEGDMA-MAGA) particles were prepared by the dispersion polymerization in order to purify thrombin effectively. mPEGDMA-MAGA particles were synthesized by adding different ratios of magnetite (Fe3O4) to the medium in addition to the monomer phases EGDMA and MAGA. The characterization studies of mPEGDMA-MAGA particles were used by fourier transform infrared spectroscopy, zeta size measurement, scanning electron microscopy and electron spin resonance. mPEGDMA-MAGA particles were used in thrombin adsorption studies from aqueous thrombin solutions in both batch and magnetically stabilized fluidized bed (MSFB) system. Maximum adsorption capacity in pH 7.4 phosphate buffer solution is 964 IU/g polymer and 134 IU/g polymer in MSFB system and batch system, respectively. The developed magnetic affinity particles enabled the separation of thrombin from different patient serum samples in one step. It has also been observed that magnetic particles can be used repeatedly without significant reduction in adsorption capacity.

Fab fragment immobilized immunoaffinity cryogels as a tool for human serum albumin purification: Characterization of Fab immobilized cryogels.

As a general approach Fab immobilized immunoaffinity cryogels for human serum albumin purification is presented in this article. The directed immobilization of antibodies, which have been used as diagnostic and therapeutic agents in applications recently, has brought a different perspective to the purification method. In our study to shed light on this method, anti-HSA Fab fragment immobilized poly(hydroxylethyl methacrylate-N-methacryloyl-(l)-cysteine) (PHEMAC-Fab) and PHEMAC cryogels were prepared for the purification of human serum albumin (HSA). The specific surface areas of the PHEMAC-Fab and PHEMAC cryogels were calculated as 38.6 m2/g, and 20.0 m2/g, respectively. In comparison, the maximum swelling ratio was observed in the PHEMAC-Fab cryogel and more water was absorbed than the PHEMAC cryogel. While the macropore ratio in the PHEMAC-Fab cryogel is 54.3%, the macropore ratio of the PHEMAC cryogels is 41.6%. The results obtained here showed that anti-HSA cryogel prepared by immobilization of Fab fragments can be an alternative to traditional immunoaffinity techniques for HSA purification.

Metal-chelated polyamide hollow fiber membranes for ovalbumin purification from egg white.

In the study, purification of ovalbumin was performed by modifying polyamide hollow fiber membranes using immobilized metal affinity chromatography technique. For this purpose, firstly polyethyleneimine (PEI) solutions of different concentrations were attached to hollow fiber membranes. Then, Cu(II), Ni(II) and Zn(II) metal ions were chelated separately to polyethyleneimine attached hollow fiber membranes. Characterization studies of modified hollow fiber membranes were performed with scanning electron microscopy (SEM). Also, the surface area was measured with the Brunner Emmet Teller (BET) method and the porosity was measured with mercury porosimeter. pH, ionic strength, initial ovalbumin concentration, temperature and reusability parameters affecting adsorption capacity were investigated. The maximum ovalbumin adsorption capacities of hollow fiber membranes were found to be 317 mg/g for Cu(II), 169 mg/g for Ni(II) and 101 mg/g for Zn(II), respectively. Desorption ratio of metal ions were calculated as 91.6% for Cu(II), 92.9% for Ni(II) and 91.8% for Zn(II), which are quite high and suitable. When examined in terms of adsorption isotherm models, it was concluded that the Langmuir model is suitable. Purification of ovalbumin from egg white was carried out by fast performance liquid chromatography (FPLC), and the purity of ovalbumin was evaluated by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) method.

Preparation of surface plasmon resonance-based nanosensor for curcumin detection.

In this study, the curcumin imprinted and the non-imprinted poly(2-hydroxyethyl methacrylate-N-methacryloyl-L-tryptophan) (poly(HEMA-MATrp)) nanoparticle based surface plasmon resonance (SPR) nanosensors were prepared for the detection of curcumin and characterized by zeta-size analysis, Fourier transform infrared spectroscopy, and scanning electron microscopy. After, the curcumin imprinted and the non-imprinted nanoparticles are attached on the surface of SPR chips. The curcumin imprinted and the non-imprinted SPR nanosensors are characterized by using atomic force microscope, ellipsometer, and contact angle measurements. Kinetic studies were carried out with curcumin aqueous solution at a concentration range of 0.01-150 mg/L using the curcumin imprinted and the non-imprinted SPR nanosensors. In all kinetic analysis, the response time is 14 min for equilibration, adsorption, and desorption cycles. The limit of detection and limit of quantification for the curcumin imprinted SPR nanosensors was 0.0012 mg/L and 0.0040 mg/L, respectively. The validity of the curcumin imprinted SPR nanosensors in real samples was carried out using liquid chromatography-tandem mass spectrometry (LC-MS).

Molecularly Imprinted Polymer-Based Quartz Crystal Microbalance Sensor for the Clinical Detection of Insulin.

In this study, we reported the design of a quartz crystal microbalance (QCM) sensors for selective insulin detection. In the first step, N-methacryloyl-(L) 3-histidine methyl ester (MAH) monomer was formed a complex with insulin. Then, 2-hydroxyethyl methacrylate and ethylene glycol dimethacrylate were mixed with MAH:insulin complex. Insulin-imprinted and non-imprinted QCM sensors were synthesized by ultraviolet polymerization for the insulin detection. Insulin-imprinted QCM sensors was characterized by the contact angle measurements, atomic force microscopy and ellipsometry. Limit of detection (LOD) was found as 0.00158 ng/mL for the insulin-imprinted QCM sensors. Selectivity of insulin-imprinted and non-imprinted QCM sensors was carried in the presence of glucagon and aprotinin. Insulin-imprinted QCM sensor for insulin detection was also examined in the artificial plasma.

Molecularly imprinted nanofilms for endotoxin detection using an surface plasmon resonance sensor.

In this study, a simple, fast, sensitive and selective surface plasmon resonance (SPR) sensor was prepared using molecular imprinting method for endotoxin detection. Endotoxin imprinted and non-imprinted poly(hydroxyethyl methacrylate-N-methacryloyl-(L)-histidine methyl ester) based nanofilms were synthesized on the SPR chip surfaces using ultraviolet polymerization. Endotoxin imprinted and non-imprinted SPR sensors were characterized by using contact angle, atomic force microscopy and ellipsometry. After characterization studies, kinetic studies was carried out in the concentration range of 0.5-100 ng/mL. The limit of detection and quantification were obtained as 0.023 and 0.078 ng/mL, respectively. The response time for the equilibration, adsorption and regeneration was approximately 14 min. The selectivity studies with cholesterol and hemoglobin of endotoxin imprinted SPR sensor were examined. Validation studies were carried out via limulus amebocyte lysate (LAL) in order to demonstrate the applicability of the SPR sensor.

Injectable Cryogels in Biomedicine.

Cryogels are interconnected macroporous materials that are synthesized from a monomer solution at sub-zero temperatures. Cryogels, which are used in various applications in many research areas, are frequently used in biomedicine applications due to their excellent properties, such as biocompatibility, physical resistance and sensitivity. Cryogels can also be prepared in powder, column, bead, sphere, membrane, monolithic, and injectable forms. In this review, various examples of recent developments in biomedical applications of injectable cryogels, which are currently scarce in the literature, made from synthetic and natural polymers are discussed. In the present review, several biomedical applications of injectable cryogels, such as tissue engineering, drug delivery, therapeutic, therapy, cell transplantation, and immunotherapy, are emphasized. Moreover, it aims to provide a different perspective on the studies to be conducted on injectable cryogels, which are newly emerging trend.

Surface Plasmon Resonance Based on Molecularly Imprinted Polymeric Film for l-Phenylalanine Detection.

In this study, we designed a simple, rapid, sensitive and selective surface plasmon resonance (SPR) sensor for detection of L-phenylalaine by utilizing molecular imprinting technology. l-phenylalanine imprinted and non-imprinted poly(2-hydroxyethyl methacrylate-methacryloyl-l-phenylalanine) polymeric films were synthesized onto SPR chip surfaces using ultraviolet polymerization. l-phenyalanine imprinted and non-imprinted SPR sensors were characterized by using contact angle, atomic force microscopy and ellipsometry. After characterization studies, kinetic studies were carried out in the concentration range of 5.0-400.0 µM. The limit of detection and quantification were obtained as 0.0085 and 0.0285 µM, respectively. The response time for the test including equilibration, adsorption and desorption was approximately 9 min. The selectivity studies of the l-phenylalanine imprinted SPR sensor was performed in the presence of d-phenylalanine and l-tryptophan. Validation studies were carried out via enzyme-linked immunosorbent analysis technique in order to demonstrate the applicability and superiority of the l-phenylalanine imprinted SPR sensor.

Detection of amoxicillin residues in egg extract with a molecularly imprinted polymer on gold microchip using surface plasmon resonance and quartz crystal microbalance methods.

In this study, surface plasmon resonance (SPR) and quartz crystal microbalance (QCM) sensors were prepared for the detection of amoxicillin from the commercial and local chicken eggs by using molecular imprinting technique. Amoxicillin imprinted poly(hydroxyethyl methacrylate-methacrylic acid) polymeric film was synthesized onto the surface of the SPR and QCM chips by ultra violet polymerization to determine lower concentrations of amoxicillin. Ellipsometry, contact angle analysis, and atomic force microscopy measurements were used for the surface morphology of the polymeric film layer. The ellipsometric thickness of AMOX imprinted and nonimprinted SPR and QCM chip surfaces were measured as 35 ± 0.9 nm, 32.89 ± 1.9 nm, 30 ± 0.6 nm, and 28 ± 0.22 nm, respectively. Contact angles of bare gold surfaces, AMOX imprinted SPR and QCM chip surfaces were measured to be as 82.3° ± 0.15, 79.2° ± 0.14, 75.01° ± 1.07, and 69.11° ± 0.89, respectively. The range of linearity was measured as 0.1 to 10 ng/mL for amoxicillin imprinted SPR and QCM sensors. The maximum residue limit of AMOX in eggs is at 10 µg/kg in accordance with the "Positive List System for Agricultural Chemical Residues in Foods." The response time for the test, including adsorption, desorption, and regeneration, was approximately 45 min. The limit of detections for SPR and QCM sensors were found to be 0.0005 and 0.0023 ng/mL, respectively. The reusabilities of amoxicillin imprinted SPR and QCM sensors were observed by the equilibration-binding-regeneration. Validation studies of the AMOX imprinted SPR and QCM sensors were performed by liquid chromatography-tandem mass spectrometry.

Detection of cardiac troponin-I by optic biosensors with immobilized anti-cardiac troponin-I monoclonal antibody.

In this study, it is aimed to determine cardiac troponin I by a surface plasmon resonance biosensor immobilized anti-cardiac troponin I monoclonal antibody. The immobilized anti-cardiac troponin I monoclonal antibody surface plasmon resonance biosensors were characterized with ellipsometry, atomic force microscopy and contact angle analysis. After that, surface plasmon resonance biosensor system was completed to biosensor system to investigate kinetic properties for cardiac tropinin I. The sensing ability of surface plasmon resonance biosensor was investigated with 0.001-8.0 ng/mL concentrations of cardiac tropinin I solutions. The limit of detection and limit of quantification were calculated as 0.00012 ng/mL and 0.00041 ng/mL, respectively. To show the selectivity of surface plasmon resonance biosensor competitive adsorption of cardiac tropinin I, myoglobin, immunoglobulin G and prostate specific antigen were investigated. Surface plasmon resonance biosensor was investigated five times with 0.5 ng/mL concentrations of cardiac tropinin I solution to show reuse of the chip. The results showed that surface plasmon resonance biosensor has high selectivity for cardiac tropinin I. The reproducibility of surface plasmon resonance sensors was investigated both on the same day and on different days for five times. To determine the usability, selectivity and validation studies of surface plasmon resonance biosensors were performed by enzyme-linked immunosorbent assay method.

Adenosine-imprinted magnetic core-shell polyvinylbutyral microbeads for quantification of adenosine in plasma.

Adenosine is an important molecule in the human body because it participates various biochemical processes, signalling in the physiological processes, and neurological disorders. In the current study, the surface imprinting method was used to prepare adenosine-imprinted magnetic core-shell polyvinylbutyral microbeads. These microbeads were utilized for quantification of adenosine in aqueous solution and control plasma in the range of 1-200 µM. The limit of detection was found to be 1.9 nM, which is quite sensitive compared with to some earlier studies. Fourier transform infrared spectroscopy, scanning electron microscopy, and a Zetasizer (particle size analyzer) were used for characterization of the prepared imprinted microbeads. To determine the efficiency of this method, selectivity experiments were conducted with adenosine-imprinted and non-imprinted magnetic core-shell polyvinylbutyral microbeads and with the competitive nucleosides cytidine, uridine, guanosine, and thymidine. Thermodynamic and kinetic studies were performed to assess adsorption of adenosine onto the adenosine-imprinted magnetic core-shell polyvinylbutyral microbeads from adenosine solution. The efficiency was linked to the specific surface reactivity, polarity and porosity of the imprinted microbeads.

Molecular Imprinted Based Quartz Crystal Microbalance Nanosensors for Mercury Detection.

Mercury(II) ions are emerging as a result of more human activity, especially coal-fired power plants, industrial processes, waste incineration plants, and mining. The mercury found in different forms after spreading around diffuses the nature of other living things. Although the damage to health is not yet clear, it is obvious that it is the cause of many diseases. This work detects the problem of mercury(II) ions, one of the active pollutants in wastewater. For this purpose, it is possible to detect the smallest amount of mercury(II) ions by means of the mercury(II) ions suppressed quartz crystal microbalance nanosensor developed. Zinc(II) and cadmium(II) ions are chosen as competitor elements. Developed nanosensor technology is known as the ideal method in the laboratory environment to detect mercury(II) ions from wastewater because of its low cost and precise result orientation. The range of linearity and the limit of detection are measured as 0.25 × 10-9-50 × 10-9 m. The detection limit is found to be 0.21 × 10-9 m. The mercury(II) ions imprinted nanosensors prepared according to the obtained experimental findings show high selectivity and sensitivity to detect mercury(II) ions from wastewater.

Cholesterol removal from human plasma with biologically modified cryogels.

In this study, low molecular weight heparin immobilized P(HEMA) cryogels were fabricated for the removal of LDL-C in hypercholesterolemic human plasma. After characterization studies for P(HEMA) cryogels, effects of the parameters including medium pH, CNBr concentration, heparin concentration and contact time on heparin immobilization were investigated. Blood compatibility and cell adhesion tests were also performed, and platelet and leucocyte loss for P(HEMA)-Hp cryogels were found to be 2.95% and 4.91%, respectively. Maximum adsorption capacity for LDL-C from hypercholesterolemic human plasma was found to be 26.7 mg/g for P(HEMA)-Hp cryogel while it was only 1.67 mg/g for bare P(HEMA) cryogel. The P(HEMA)-Hp cryogels exhibit high desorption ratios up to 96% after 10 adsorption-desorption cycles with no significant decrease in the adsorption capacity. The findings indicated that these reusable P(HEMA)-based cryogels proposed good alternative adsorbents for removal of LDL-C.

Molecularly imprinted polymer based quartz crystal microbalance sensor for the clinical detection of insulin.

In this study, quartz crystal microbalance sensors based on molecular imprinting technology were fabricated for real-time detection of insulin in aqueous solution and artificial plasma. This study describes the preparation of insulin imprinted poly(hydroxyethyl methacrylate)-N-methacryloyl-(l)-histidine methyl ester based quartz crystal microbalance sensor for insulin determination. Poly(hydroxyethyl methacrylate)-N-methacryloyl-(l)-histidine methyl ester based film on chip surface was synthesized by ultra violet (UV) polymerization for the detection of insulin at low concentrations. At the first step, N-methacryloyl-(l)-histidine methyl ester complex was formed with insulin and then, the insulin imprinted film has been prepared. The characterization of the polymeric film has been conducted with ellipsometry, contact angle, Fourier transform infrared-attenuated total reflectance and atomic force microscopy measurements. Langmuir, Freundlich and Langmuir-Freundlich adsorption isotherm models were applied for this system. The best fitted model to explain the interactions between molecular imprinted chip and insulin molecules was the Langmuir adsorption isotherm (R2: 0.999). The repeatability of insulin imprinted chip was investigated by using of equilibration-binding-regeneration cycles for four times. The detection limit was found as 0.00158 ng/mL. According to the results, the QCM sensor has showed low-detection limit, high selectivity and sensitivity for insulin assay.

A Novel On-Chip Method for Differential Extraction of Sperm in Forensic Cases.

One out of every six American women has been the victim of a sexual assault in their lifetime. However, the DNA casework backlog continues to increase outpacing the nation's capacity since DNA evidence processing in sexual assault casework remains a bottleneck due to laborious and time-consuming differential extraction of victim's and perpetrator's cells. Additionally, a significant amount (60-90%) of male DNA evidence may be lost with existing procedures. Here, a microfluidic method is developed that selectively captures sperm using a unique oligosaccharide sequence (Sialyl-LewisX), a major carbohydrate ligand for sperm-egg binding. This method is validated with forensic mock samples dating back to 2003, resulting in 70-92% sperm capture efficiency and a 60-92% reduction in epithelial fraction. Captured sperm are then lysed on-chip and sperm DNA is isolated. This method reduces assay-time from 8 h to 80 min, providing an inexpensive alternative to current differential extraction techniques, accelerating identification of suspects and advancing public safety.

Removal of iron by chelation with molecularly imprinted supermacroporous cryogel.

Iron chelation therapy can be used for the selective removal of Fe(3+) ions from spiked human plasma by ion imprinting. N-Methacryloyl-(L)-glutamic acid (MAGA) was chosen as the chelating monomer. In the first step, MAGA was complexed with the Fe(3+) ions to prepare the precomplex, and then the ion-imprinted poly(hydroxyethyl methacrylate-N-methacryloyl-(L)-glutamic acid) [PHEMAGA-Fe(3+)] cryogel column was prepared by cryo-polymerization under a semi-frozen temperature of - 12°C for 24 h. Subsequently, the template, of Fe(3+) ions was removed from the matrix by using 0.1 M EDTA solution. The values for the specific surface area of the imprinted PHEMAGA-Fe(3+) and non-imprinted PHEMAGA cryogel were 45.74 and 7.52 m(2)/g respectively, with a pore size in the range of 50-200 µm in diameter. The maximum Fe(3+) adsorption capacity was 19.8 µmol Fe(3+)/g cryogel from aqueous solutions and 12.28 µmol Fe(3+)/g cryogel from spiked human plasma. The relative selectivity coefficients of ion-imprinted cryogel for Fe(3+)/Ni(2+) and Fe(3+)/Cd(2+) were 1.6 and 4.2-fold greater than the non-imprinted matrix, respectively. It means that the PHEMAGA-Fe(3+) cryogel possesses high selectivity to Fe(3+) ions, and could be used many times without significantly decreasing the adsorption capacity.

Dye affinity cryogels for plasmid DNA purification.

The aim of this study is to prepare megaporous dye-affinity cryogel discs for the purification of plasmid DNA (pDNA) from bacterial lysate. Poly(hydroxyethyl methacrylate) [PHEMA] cryogel discs were produced by free radical polymerization initiated by N,N,N',N'-tetramethylene diamine (TEMED) and ammonium persulfate (APS) redox pair in an ice bath. Cibacron Blue F3GA was used as an affinity ligand (loading amount: 68.9µmol/g polymer). The amount of pDNA adsorbed onto the PHEMA-Cibacron Blue F3GA cryogel discs first increased and then reached a plateau value (i.e., 32.5mg/g cryogel) at 3.0mg/mL pDNA concentration. Compared with the PHEMA cryogel (0.11mg/g cryogel), the pDNA adsorption capacity of the PHEMA-Cibacron Blue F3GA cryogel (32.4mg/g polymer) was improved significantly due to the Cibacron Blue 3GA immobilization onto the polymeric matrix. pDNA adsorption amount decreased from 11.7mg/g to 1.1mg/g with the increasing of NaCl concentration. The maximum pDNA adsorption was achieved at 4°C. The overall recovery of pDNA was calculated as 90%. The PHEMA-Cibacron Blue F3GA cryogel discs could be used five times without decreasing the pDNA adsorption capacity significantly. The results show that the PHEMA-Cibacron Blue F3GA cryogel discs promise high selectivity for pDNA.

Enantioseparation of aromatic amino acids using CEC monolith with novel chiral selector, N-methacryloyl-L-histidine methyl ester.

A new type of polymethacrylate-based monolithic column with chiral stationary phase was prepared for the enantioseparation of aromatic amino acids, namely D,L-phenylalanine, D,L-tyrosine, and D,L-tryptophan by CEC. The monolithic column was prepared by in situ polymerization of butyl methacrylate (BMA), N-methacryloyl-L-histidine methyl ester (MAH), and ethylene dimethacrylate (EDMA) in the presence of porogens. The porogen mixture included DMF and phosphate buffer. MAH was used as a chiral selector. FTIR spectrum of the polymethacrylate-based monolith showed that MAH was incorporated into the polymeric structure via in situ polymerization. Some experimental parameters including pH, concentration of the mobile phase, and MAH concentration with regard to the chiral CEC separation were investigated. Single enantiomers and enantiomer mixtures of the amino acids were separately injected into the monolithic column. It was observed that L-enantiomers of aromatic amino acids migrated before D-enantiomers. The reversal enantiomer migration order for tryptophan was observed upon changing of pH. Using the chiral monolithic column (100 µm id and 375 µm od), the best chiral separation was performed in 35:65% ACN/phosphate buffer (pH 8.0, 10 mM) with an applied voltage of 12 kV in CEC. SEM images showed that the chiral monolithic column has a continuous polymeric skeleton and large through-pore structure.

Immobilized metal affinity monolithic cryogels for cytochrome c purification.

A monolithic cryogel column was prepared to obtain an efficient, cost effective and rapid purification of cytochrome c from rat liver homogenate. N-Methacryloyl-(l)-histidine methyl ester (MAH) was used as the metal-chelating ligand. Poly(hydroxyethyl methacrylate-N-methacryloyl-(l)-histidine methyl ester) [PHEMAH] monolithic cryogel was produced by free radical polymerization initiated by N,N,N',N'-tetramethylene diamine (TEMED) and ammonium persulfate (APS) pair in an ice bath. PHEMAH cryogel was characterized by surface area measurements, swelling studies, scanning electron microscopy and elemental analysis. The PHEMAH cryogel had a specific surface area of 38.6 m(2)/g. The PHEMAH cryogel containing 113.7 µmol MAH/g was complexed with the Cu(2+) ions directly via MAH for the adsorption of cytochrome c from aqueous solutions and rat liver homogenate. The cytochrome c adsorption on the PHEMAH cryogel was 3.1 mg/g. The maximum cytochrome c adsorption capacity of the Cu(2+)-chelated PHEMAH cryogel (carrying 58.7 µmol Cu(2+) per gram of polymer) was found to be 20.8 mg/g at pH 8.0 in phosphate buffer. The cytochrome c adsorption amount from rat liver homogenate was 37.7 mg/g with a purity of 93.8%. It was observed that cytochrome c could be repeatedly adsorbed and eluted with the PHEMAH cryogel without significant loss in the adsorption capacity.