Influence of Graphene Sheets on Compaction and Sintering Properties of Nano-Zirconia Ceramics.

The use of a nanostructured graphene-zirconia composite will allow the development of new materials with improved performance properties and a high functionality. This work covers a stepwise study related to the creation of a nanostructured composite based on ZrO2 and graphene. A composite was prepared using two suspensions: nano-zirconia obtained by sol-gel synthesis and oxygen-free graphene obtained sonochemically. The morphology of oxygen-free graphene sheets, phase composition and the morphology of a zirconia powder, and the morphology of the synthesized composite were studied. The effect of the graphene sheets on the rheological and sintering properties of a nanostructured zirconia-based composite powder has been studied. It has been found that graphene sheets in a hybrid nanostructure make it difficult to press at the elastic deformation stage, and the composite passes into the plastic region at a lower pressure than a single nano-zirconia. A sintering mechanism was proposed for a composite with a graphene content of 0.635 wt%, in which graphene is an important factor affecting the process mechanism. It has been determined that the activation energy of the composite sintering is more than two times higher than for a single nano-zirconia. Apparently, due to the van der Waals interaction, the graphene sheets partially stabilize the zirconia and prevent the disordering of the surface monolayers of its nanocrystals and premelting prior to the sintering. This leads to an increase in the activation energy of the composite sintering, and its sintering occurs, according to a mixed mechanism, in which the grain boundary diffusion predominates, in contrast to the single nano-zirconia sintering, which occurs through a viscous flow.

Preparation of Biocidal Nanocomposites in X-ray Irradiated Interpolyelectolyte Complexes of Polyacrylic Acid and Polyethylenimine with Ag-Ions.

Due to the presence of cationic units interpolyelectrolyte complexes (IPECs) can be used as a universal basis for preparation of biocidal coatings on different surfaces. Metallopolymer nanocomposites were successfully synthesized in irradiated solutions of polyacrylic acid (PAA) and polyethylenimine (PEI), and dispersions of non-stoichiometric IPECs of PAA-PEI containing silver ions. The data from turbidimetric titration and dynamic light scattering showed that pH 6 is the optimal value for obtaining IPECs. Metal polymer complexes based on IPEC with a PAA/PEI ratio equal to 3/1 and 1/3 were selected for synthesis of nanocomposites due to their aggregative stability. Studies using methods of UV-VIS spectroscopy and TEM have demonstrated that the size and spatial organization of silver nanoparticles depend on the composition of polymer systems. The average sizes of nanoparticles are 5 nm and 20 nm for complexes with a molar ratio of PAA/PEI units equal to 3/1 and 1/3, respectively. The synthesized nanocomposites were applied to the glass surface and exhibited high antibacterial activity against both gram-positive (Staphylococcus aureus) and gram-negative bacteria (Salmonella). It is shown that IPEC-Ag coatings demonstrate significantly more pronounced biocidal activity not only in comparison with macromolecular complexes of PAA-PEI, but also coatings of PEI and PEI based nanocomposites.

Imaging-Guided Delivery of a Hydrophilic Drug to Eukaryotic Cells Based on Its Hydrophobic Ion Pairing with Poly(hexamethylene guanidine) in a Maleated Chitosan Carrier.

Imaging-guided delivery is developed for hydrophobic drugs, and to a much lesser extent, hydrophilic ones. In this work we have designed a novel strategy for real-time monitoring of hydrophilic drug delivery. Traditionally, the drug and the dye are covalently attached to a nanocarrier or are electrostatically adsorbed. Recently, we found an efficient way to bind the drug by ion-paring with an appropriate counter-ion to form the aggregate that embeds a hydrophobic dye with a considerable fluorescence enhancement. We synthesized a series of carbocyanine dyes of hydrophobicity sufficient for solubilization in hydrophobic ion pairs, which restores their emission in the near-infrared (NIR) region upon the formation of the ternary aggregates. To avoid using toxic surfactants, we applied an amphiphilic polymer-oligomer poly(hexamethylene guanidine) (PHMG) as a counter-ion. Сeftriaxone was used as a model hydrophilic drug ensuring the highest fluorescent signal. The so-formed drug-counter-ion-dye aggregates were encapsulated into a cross-linked maleated chitosan carrier. Confocal laser scanning microscopy (CLSM) studies have demonstrated internalization of the encapsulated model drug by breast adenocarcinoma cells at 40 min after treatment. These results suggest the potential application of hydrophobic ion pairs containing an NIR dye in imaging-guided delivery of hydrophilic compounds.

Binding of chloroaurate to polytyrosine-PEG micelles leads to an anti-Turkevich pattern of reduction.

Here we report formation of gold nanoparticles (GNPs) in micelles of polytyrosine-PEG copolymers that combine the properties of a reducer and a stabilizer. The size and properties of the GNPs were tailored by the excess chloroaurate over the copolymer. The latter quickly formed non-covalent complexes with HAuCl4 and then slowly reduced it to form GNPs. 3 Tyr residues are consumed by reduction of one mole of chloroaurate. The size of the GNPs was controlled by the [Tyr]/[Au(iii)] molar ratio. Small GNPs with D ≅ 8 nm were formed at [Tyr]/[Au(iii)] = 0.5-1.5. 90% of these small GNPs remained bound to the copolymer and could be stored in a lyophilized state. Such polypeptide-gold hybrid materials produced at [Tyr]/[Au(iii)] = 0.5 demonstrated high activity in the catalytic reduction of 4-nitrophenol by sodium borohydride. [Tyr]/[Au(iii)] = 5 led to the formation of large nanoplates (D ≅ 30-60 nm). Thus, in the polymer-based system the GNP size grew in line with the excess of the reducing agent in contrast to Turkevich synthesis of GNPs with citric acid, which also combines the functions of a stabilizer and a reducer. The difference results from the reduction of HAuCl4 in solution according to the Turkevich method and in the micelles of the amphiphilic polymer where the seed growth is limited by the amount of neighboring reducer.

Magnetic-field-assisted synthesis of anisotropic iron oxide particles: Effect of pH.

The synthesis of magnetite (Fe3O4) nanorods using reverse co-precipitation of Fe3+ and Fe2+ ions in the presence of a static magnetic field is reported in this work. The phase composition and crystal structure of the synthesized material were investigated using electron diffraction, Raman spectroscopy, and transmission electron microscopy. It was shown that the morphology of the reaction product strongly depends on the amount of OH- ions in the reaction mixture, varying from Fe3O4 nanorods to spherical Fe3O4 nanoparticles. Fe3O4 nanorods were examined using high-resolution transmission electron microscopy proving that they are single-crystalline and do not have any preferred crystallographic orientation along the axis of the rods. According to the data obtained a growth mechanism was proposed for the rods that consists of the dipole-dipole interaction between their building blocks (small hexagonal faceted magnetite nanocrystals), which are formed during the first step of the reaction. The study suggests a facile, green and controllable method for synthesizing anisotropic magnetic nanoparticles in the absence of stabilizers, which is important for further modification of their surfaces and/or incorporation of the nanoparticles into different media.

Copper-Chitosan Nanocomposite Hydrogels Against Aflatoxigenic Aspergillus flavus from Dairy Cattle Feed.

The integration of copper nanoparticles as antifungal agents in polymeric matrices to produce copper polymer nanocomposites has shown excellent results in preventing the growth of a wide variety of toxigenic fungi. Copper-chitosan nanocomposite-based chitosan hydrogels (Cu-Chit/NCs hydrogel) were prepared using a metal vapor synthesis (MVS) and the resulting samples were described by transmission electron microscopy (TEM), X-ray fluorescence analysis (XRF), and small-angle X-ray scattering (SAXS). Aflatoxin-producing medium and VICAM aflatoxins tests were applied to evaluate their ability to produce aflatoxins through various strains of Aspergillus flavus associated with peanut meal and cotton seeds. Aflatoxin production capacity in four fungal media outlets revealed that 13 tested isolates were capable of producing both aflatoxin B1 and B2. Only 2 A. flavus isolates (Af11 and Af 20) fluoresced under UV light in the A. flavus and parasiticus Agar (AFPA) medium. PCR was completed using two specific primers targeting aflP and aflA genes involved in the synthetic track of aflatoxin. Nevertheless, the existence of aflP and aflA genes indicated some correlation with the development of aflatoxin. A unique DNA fragment of the expected 236 bp and 412 bp bands for aflP and aflA genes in A. flavus isolates, although non-PCR fragments have been observed in many other Aspergillus species. This study shows the antifungal activity of Cu-Chit/NCs hydrogels against aflatoxigenic strains of A. flavus. Our results reveal that the antifungal activity of nanocomposites in vitro can be effective depending on the type of fungal strain and nanocomposite concentration. SDS-PAGE and native proteins explain the apparent response of cellular proteins in the presence of Cu-Chit/NCs hydrogels. A. flavus treated with a high concentration of Cu-Chit/NCs hydrogels that can decrease or produce certain types of proteins. Cu-Chit/NCs hydrogel decreases the effect of G6DP isozyme while not affecting the activity of peroxidase isozymes in tested isolates. Additionally, microscopic measurements of scanning electron microscopy (SEM) showed damage to the fungal cell membranes. Cu-Chit/NCS hydrogel is an innovative nano-biopesticide produced by MVS is employed in food and feed to induce plant defense against toxigenic fungi.

Residual heavy metals in industrial chitosan: State of distribution.

A series of industrial chitosans were analyzed on the presence of residual heavy metals. For the first time, optical microscopy data showed that chitosan solution retained a huge number of insoluble microparticles while transmittance electron microscopy revealed that insoluble fibrous microparticles were incrusted by crystalline nanoparticles with the sizes 5-50 nm. A series of filters used for chitosan solution filtration was analyzed on the presence of retained heavy metal and other residuals by scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDXS) and mass-spectrometry with inductively coupled plasma (ICP-MS) methods. The SEM-EDXS analysis revealed the presence of Fe residuals together with Si, Al, N and S in the particles found on the filters. ICP-MS analysis found the presence of heavy metals (mainly Fe, Cr and Ni) both on the filter surfaces and in the effluent chitosan solution passed though the filters. This study draws attention to the necessity of a careful selection of industrially manufactured chitosan in order to avoid hidden undesirable effects of chitosan on pharmaceuticals and biomaterials and gives a warning of inapplicability of a stainless-steel made apparatus as a reactor susceptible to caustic soda corrosion for chitin deacetylation and production of medical and food grade chitosan.

Heterochromatin restricts the mobility of nuclear bodies.

Nuclear bodies are relatively immobile organelles. Here, we investigated the mechanisms underlying their movement using experimentally induced interphase prenucleolar bodies (iPNBs). Most iPNBs demonstrated constrained diffusion, exhibiting infrequent fusions with other iPNBs and nucleoli. Fusion events were actin-independent and appeared to be the consequence of stochastic collisions between iPNBs. Most iPNBs were surrounded by condensed chromatin, while fusing iPNBs were usually found in a single heterochromatin-delimited compartment ("cage"). The experimentally induced over-condensation of chromatin significantly decreased the frequency of iPNB fusion. Thus, the data obtained indicate that the mobility of nuclear bodies is restricted by heterochromatin.

Formation of Easy-to-Recover Polystyrene-block-Poly(4-vinylpyridine) Micelles Decorated with Pd Nanoparticles in Solutions of Self-Neutralizing Carbonic Acid.

It was found out that block copolymers of polystyrene and poly(4-vinylpyridine) with comparable lengths of blocks could be dissolved in a high-pressure reactor containing water phase saturated with carbon dioxide under high pressure at room temperature. This rather effective dissolution occurs due to a protonation of P4VP nitrogen-containing groups together with a plasticization of the polymer material to be dissolved by a compressed dense CO2 being contained in the autoclave. The selected block copolymers form rather monodispersed micelles with well-defined and reproducible spherical geometry. They apparently have a hydrophobic polystyrene core and a polycationic poly-4-vinylpyridine corona. The obtained micelles were characterized by various techniques such as DLS, AFM, TEM, and SEM. Further, it was revealed that the corona of such micelles could be decorated with Pd nanoparticles having the diameter around 3 nm.

The overexpression of nuclear envelope protein Lap2ß induces endoplasmic reticulum reorganisation via membrane stacking.

Some nuclear envelope proteins are localised to both the nuclear envelope and the endoplasmic reticulum; therefore, it seems plausible that even small amounts of these proteins can influence the organisation of the endoplasmic reticulum. A simple method to study the possible effects of nuclear envelope proteins on endoplasmic reticulum organisation is to analyze nuclear envelope protein overexpression. Here, we demonstrate that Lap2ß overexpression can induce the formation of cytoplasmic vesicular structures derived from endoplasmic reticulum membranes. Correlative light and electron microscopy demonstrated that these vesicular structures were composed of a series of closely apposed membranes that were frequently arranged in a circular fashion. Although stacked endoplasmic reticulum cisternae were highly ordered, Lap2ß could readily diffuse into and out of these structures into the surrounding reticulum. It appears that low-affinity interactions between cytoplasmic domains of Lap2ß can reorganise reticular endoplasmic reticulum into stacked cisternae. Although the effect of one protein may be insignificant at low concentrations, the cumulative effect of many non-specialised proteins may be significant.

Liquid-crystalline polymer composites with CdS nanorods: structure and optical properties.

We report on the structure, uniaxial orientation, and photoluminescent properties of CdS nanorods that form stable nanocomposites with smectic C hydrogen-bonded polymers from the family of poly(4-(n-acryloyloxyalkoxy)benzoic acids. TEM analysis of microtomed films of nanocomposites reveals that CdS nanorods form small domains that are homogeneously distributed in the LC polymer matrix. They undergo long-range orientation with the formation of one-dimensional aggregates of rods when the composite films are uniaxially deformed. The Stokes photoluminescence was observed from CdS NRs/LC polymer composites with emission peak located almost at the same wavelength as that of NRs solution in heptane. An anti-Stokes photoluminescence (ASPL) in polymer nanocomposites was found under the excitation below the nanoparticles ground state. The mechanism of ASPL was interpreted in terms of thermally populated states that are involved in the excitation process. These nanocomposites represent an unusual material in which the optical properties of anisotropic semiconductor nanostructures can be controlled by mechanical deformation of liquid-crystalline matrix.

Competition between compaction of single chains and bundling of multiple chains in giant DNA molecules.

It has been established that in a dilute solution individual giant DNA molecules undergo a large discrete transition between an elongated coil state and a folded compact state. On the other hand, in concentrated solutions, DNA molecules assemble into various characteristic states, including multichain aggregate, liquid crystalline, ionic crystal, etc. In this study, we compared single-chain and multiple-chain events by observing individual chains using fluorescence microscopy. We used spermidine, SPD(3+), as a condensing agent for giant DNA. When the concentration of DNA is below 1 microM in base-pair units, individual DNA molecules exhibit a transition from an elongated state to a compact state. When the concentration of DNA is increased to 10 microM, a thick fiberlike assembly of multiple chains appears. AFM measurements of this thick fiber revealed that more than tens of DNA molecules form a bundle structure with parallel ordering of the chains. The transition between single-chain compaction and bundle formation with multiple-chain assemblies was reproduced by a theoretical calculation.