RESUMEN
STATEMENT OF PROBLEM: The trueness of the intaglio surface of an additively manufactured maxillary denture base may be influenced by the build orientation and the inclusion of support struts. PURPOSE: The purpose of this in vitro study was to compare the trueness of a photopolymer additively manufactured maxillary complete denture base created at different orientations with different support strut designs. Optimizing the build is critical for adopting best practice when fabricating maxillary complete dentures through additive manufacturing techniques. MATERIAL AND METHODS: Denture bases (N=70) were additively manufactured at 5 different build orientations (0-, 15-, 45-, 60-, and 90-degrees) with 10 specimens per orientation. Another 2 groups of 10 were manufactured by using the optimal printing orientation with and without support struts. The denture bases were scanned after storage in artificial saliva at 37 °C, and the scan data were analyzed with a 3D metrology software program. Statistical differences were determined with 1-way analysis of variance (ANOVA) and the Kruskal-Wallis test (α=.05). Color deviation heat maps were used to determine areas of clinically significant dimensional errors. RESULTS: Significant differences were found among groups for positive mean deviation (F=44.09, P<.001), negative mean deviation (F=11.69, P<.001), and root mean square deviation (F=17.11, P<.001) for the different orientations. One-way ANOVA revealed significant differences with the use of support struts in relation to negative mean deviation (F=3.857, P<.001) and RMSE (F=11.215, P<.001) and positive mean deviation (Kruskal-Wallis H=0.070, P=.007). The color deviation maps showed that a 45- to 90-degree print orientation was truest overall and that the addition of support struts to the cameo and intaglio surfaces improved the trueness of the maxillary denture bases. CONCLUSIONS: The build orientation and inclusion of support struts influenced the accuracy of the intaglio surface of additively manufactured maxillary denture bases. A 45- to 90-degree build orientation with support struts on the cameo and intaglio surfaces resulted in the truest denture base.
RESUMEN
OBJECTIVE: Representing the largest proportion of healthcare workers, nurses play a significant role in oral health (OH) maintenance as part of a larger effort to promote holistic patient care. The study aims to determine nursing students' perceptions of OH education and practice in Malaysian and Australian nursing schools. MATERIALS AND METHODS: A self-administered questionnaire (content- and face-validated) survey was undertaken, classroom style, amongst final-year nursing students from selected Malaysian (n = 122, Response rate=97.6%) and Australian (n = 299, Response rate=54.7%) institutions. Quantitative data were analysed via Statistical Package for Social Science software (Chi-square and Fisher's exact tests, p ≤ 0.01). RESULTS: Significantly more Malaysian nursing students, compared to those in Australia, reported having encountered patients with OH issues (98.4% vs. 82.9%), namely halitosis (87.7% vs. 62.2%), oral ulcers (63.1% vs. 41.1%), oral/dental trauma (36.9% vs. 21.1%) and caries in children (28.7% vs. 7.7%). Less than half of Malaysian and Australian nursing students reported that they received adequate OH training (48.4% vs. 36.6%, p ≤ 0.01), especially in detecting oral cancer (18.0.0% vs. 22.6%, p ≤ 0.01) and preventing oral diseases (46.7% vs. 41.7%, p ≤ 0.01). Students in both countries demonstrated positive attitudes and believed in their role in OH care. Most students agreed that they should receive training in OH, especially in smoking cessation and providing OH care for patients with special needs. They also opined that a standardized evidence-based oral hygiene protocol is needed. CONCLUSION: Support for education and practice in this area of patient care suggested positive implications for further development of nurses' roles in OH promotion and management.
Asunto(s)
Estudiantes de Enfermería , Australia , Niño , Educación en Salud Dental , Humanos , Malasia , Salud Bucal , Percepción , Encuestas y CuestionariosRESUMEN
INTRODUCTION: A high degree of training is necessary to prepare student nurses for their roles as oral healthcare partners that can promote a holistic approach to health in the community. This study aims to determine the extent of oral health education in Australian and Malaysian nursing institutions, as well as investigate educators' perceptions of education and practice in this area of care. METHODOLOGY: An audio-recorded, semi-structured qualitative phone interview was conducted with the heads of 42 nursing schools across Australia (n = 35) and Malaysia (n = 7) during the 2015 academic year. Qualitative data were analysed via thematic analysis. Quantitative data, wherever appropriate, were measured for frequencies. RESULTS: The response rate was 34.2% (n = 12) and 71.4% (n = 5) for the Australian and Malaysian subjects, respectively. Findings revealed that although all the nursing schools measured provided didactic and clinical training in oral health, curriculum content, expected learning outcomes, amount of clinical exposure and assessment approach lacked consistency. Most nursing educators across both countries perceived an overloaded curriculum as a barrier to providing oral health education. Whilst educators demonstrated their support for training in this area of care, they expressed the need for an established national guideline that highlights the educational requirement for future nurses in oral health maintenance and their scope of practice. CONCLUSION: This study provides valuable information for further developing oral health education for nurses, to improve their competency and ultimately the health of the communities that they will serve.
Asunto(s)
Bachillerato en Enfermería , Estudiantes de Enfermería , Australia , Curriculum , Educación en Odontología , Humanos , MalasiaRESUMEN
Education in oral health is important to prepare future medical professionals for collaborative roles in maintaining patients' oral health, an important component of general health and well-being. The aims of this study were to determine the perceptions of medical students in Malaysia and Australia of the quality of their training in oral health care and their perceptions of their professional role in maintaining the oral health of their patients. A survey was administered in the classroom with final-year Malaysian (n=527; response rate=79.3%) and Australian (n=455; response rate: 60%) medical students at selected institutions in those countries. In the results, most of these medical students reported encountering patients with oral health conditions including ulcers, halitosis, and edentulism. A majority in both countries reported believing they should advise patients to obtain regular dental check-ups and eat a healthy diet, although they reported feeling less than comfortable in managing emergency dental cases. A high percentage reported they received a good education in smoking cessation but not in managing dental trauma, detecting cancerous lesions, or providing dietary advice in oral disease prevention. They expressed support for inclusion of oral health education in medical curricula. These students' experience with and perceptions of oral health care provide valuable information for medical curriculum development in these two countries as well as increasing understanding of this aspect of interprofessional education and practice now in development around the world.
Asunto(s)
Actitud , Educación Médica , Educación en Salud Dental , Salud Bucal , Rol del Médico , Estudiantes de Medicina , Australia , MalasiaRESUMEN
BACKGROUND: Indigenous people worldwide suffer from poor oral health as compared to non-Indigenous citizens. One of the approaches to bring about improvement in Indigenous oral health is to enhance the service provision by implementing oral health outplacement programmes. A case study of such a programme for dental students in Australia reports how an educational institution can successfully engage with an Indigenous oral health service to provide learning experiences to the students as well as deliver much needed services to the community. DESIGN AND METHODS: The assessment of this ongoing outplacement programme over the period of 2008-14, based on students' feedback, highlights some of the key beneficial outcomes. Students agreed that the Indigenous outplacement programme improved their understanding of Indigenous issues (mean ± SD: 4.10±0.8; 5 refers to strongly agree on 5-point scale) and increased the possibility that they will practise in Indigenous health (3.66±1.0). They were pleased with the assistance received by clinical supervisors and clinic staff at the Indigenous dental clinic (4.28±0.8). CONCLUSIONS: This programme has demonstrated that structured student outplacements are valuable in building relations across cultures especially with Indigenous communities. It has also shown that university engagement with the public health sector can be beneficial to both institutions. Significance for public healthAn oral health outreach programme is one of the suggested approaches to effectively address the endemic issues of poor oral health among Indigenous people around the world. An Indigenous dental clinical outplacement in Australia provides an example of beneficial outcomes of such an approach. It provides dental students with an opportunity to experience the health issues related to Australian Indigenous communities and prepare future graduates to work comfortably in the public health care system. Indigenous people also develop trust and feel comfortable in receiving oral health care services from non-indigenous clinicians.
RESUMEN
AIM: To investigate the prevalence and severity of oral health-related quality of life in patients treated with removable partial dentures at a publicly-funded dental hospital. The association between patients' demographic profiles, denture-related, variables and oral health-related quality of life was also investigated. METHODS: A questionnaire was designed to investigate the use and satisfaction of removable partial dentures, and oral health-related quality of life of removable partial denture wearers using the Oral Health Impact Profile-14. The questionnaire was administered to 740 randomly-selected patients who received removable partial dentures during 2005-2008. The response rate was 31.35%. Non-parametric tests and a logistic regression model were used to analyze the association between denture-related variables and oral health-related quality of life. A question on symptoms unrelated to dentures was also analyzed. RESULTS: The Oral Health Impact Profile-14 prevalence calculated was 43.1%. The removable partial denture experience and frequency of use was inversely associated with Oral Health Impact Profile-14 scores. Metal-based removable partial dentures were associated with lower Oral Health Impact Profile prevalence and severity scores. No significant association was found between demographic profile, circumstance for provision of removable partial dentures and Oral Health Impact Profile-14 score. CONCLUSION: The participants of this study indicated that perceived denture performance, removable partial dentures material, experience, and frequency of use are associated with oral health-related quality of life.
Asunto(s)
Dentadura Parcial Removible/efectos adversos , Salud Bucal/estadística & datos numéricos , Satisfacción del Paciente/estadística & datos numéricos , Calidad de Vida , Perfil de Impacto de Enfermedad , Anciano , Anciano de 80 o más Años , Femenino , Humanos , Modelos Logísticos , Masculino , Persona de Mediana Edad , Estadísticas no Paramétricas , Encuestas y CuestionariosRESUMEN
Polyamide denture base materials are more flexible than the commonly used poly (methyl methacrylate) (PMMA). However polishability of polyamides has not been examined adequately. This study investigated the surface roughness (Ra) and clinical acceptability of samples of a polyamide denture base material and PMMA fabricated by injection moulding and traditional heat processing systems, respectively. Half of each sample surface was polished using the conventional technique (lathe with pumice followed by high shine buffs) and the other half was left unpolished. A profilometer was used to measure Ra along 3 tracks on each surface before and after polishing. Two-way ANOVA was used to compare the two surfaces of the two materials for variations in Ra values. Polyamide denture base material when polished with conventional laboratory technique became more than 7 times smoother whereas processed PMMA when polished became more than 20 times smoother using the same polishing technique. However the surface roughness of polyamide is well within the accepted norm of 0.2 µm Ra. Polyamide produces a clinically acceptable smoothness after conventional polishing by lathe.