Organic thermoelectric device utilizing charge transfer interface as the charge generation by harvesting thermal energy.

We propose an organic thermoelectric device having a new power generation mechanism that extracts small-scale thermal energy, i.e., a few tens of millielectronvolts, at room temperature without a temperature gradient. We demonstrate a new operating mechanism based on an organic thermoelectric power generation architecture that uses the charge separation capabilities of organic charge transfer (CT) interfaces composed of copper (II) phthalocyanine and copper (II) 1,2,3,4,8,9,10,11,15,16,17,18,22,23,24,25-hexadecafluoro-29H,31H-phthalocyanine as the donor and acceptor, respectively. With the optimized device architecture, values of open-circuit voltage VOC of 384 mV, short-circuit current density JSC of 1.1 µA/cm2, and maximum output Pmax of 94 nW/cm2 are obtained. The temperature characteristics of the thermoelectric properties yield activation energy values of approximately 20-60 meV, confirming the low-level thermal energy's contribution to the power generation mechanism. Furthermore, from surface potential analysis using a Kelvin probe, we confirm that charges are generated at the CT interface, and the electrons and holes are diffused to the counter-electrodes with the aid of Fermi-level alignment between adjacent layers.

Donor-only substituted benzene achieves thermally activated delayed fluorescence.

Thermally activated delayed fluorescence (TADF) is a promising mechanism for harvesting triplet excitons in organic light-emitting diodes (OLEDs). The donor-acceptor (D-A) design is the most conventional strategy for developing efficient TADF emitters. A subsequently emerged approach, known as the multiple resonance (MR) effect, also employs electron-donating and electron-withdrawing functional groups. Thus, developing TADF materials has traditionally relied on ingenuity in selecting and combining two functional units. Here, we have realized a TADF molecule by utilizing only a carbazole donor moiety. This molecule is an unusual example in the family of TADF materials and offers better insight into the electronic structures in the excited states for luminescent materials.

Dynamic Luminescence Vapochromism of Pyridinium-Based Organic Salts.

Organic vapochromic materials which undergo a drastic change in their photophysical properties upon exposure to vapors or gases are attracting growing scientific attention because of their low price and wide range of possible applications. In this work, luminescence vapochromism of carbazole-pyridinium-based organic salts with a general structure of (CzPy)X (CzPy+ = 2,3-di(9H-carbazol-9-yl)pyridinium ion; X = Cl, Br or I) is reported. It was found that (CzPy)X compounds form J-aggregates, which rearranged back to monomeric form upon exposure to methanol, ethanol, acetone, and water vapors. In contrast, acetonitrile was found to promote the J-aggregation in (CzPy)X compounds by occupying the voids in their crystal lattice and pushing cations closer together. It was further demonstrated that the efficiency of J-aggregation in (CzPy)X compounds depends on the size of the anion, which was employed to realize dynamic luminescence vapochromism, with vapochromic response times ranging from a couple of minutes in (CzPy)Cl to more than an hour in (CzPy)I. In addition, (CzPy)X compounds exhibited high melting points of about 250 °C and excellent thermal stability. (CzPy)Cl and (CzPy)Br have also shown good photoluminescence quantum yields at room temperature in a solid state.

Molecular asymmetry and rigidification as strategies to activate and enhance thermally activated delayed fluorescence in deep-blue MR-TADF emitters.

Two novel deep-blue multi-resonance thermally activated delayed fluorescence (MR-TADF) emitters, 1B-CzCrs and 2B-CzCrs, containing a fused carbazole unit were synthesized. The carbazole contributed to the emergence of TADF in these small molecules. Particularly, organic light-emitting diodes with 1B-CzCrs doped in the mCP host achieve a maximum external quantum efficiency of 12.8% at CIE coordinates of (0.146, 0.062).

Simultaneous control of carrier transport and film polarization of emission layers aimed at high-performance OLEDs.

The orientation of a permanent dipole moment during vacuum deposition results in the occurrence of spontaneous orientation polarization (SOP). Previous studies reported that the presence of SOP in organic light-emitting diodes (OLEDs) lowers electroluminescence efficiency because electrically generated excitons are seriously quenched by SOP-induced accumulated charges. Thus, the SOP in a host:guest-based emission layer (EML) should be finely controlled. In this study, we demonstrate the positive effect of dipole-dipole interactions between polar host and polar emitter molecules on the OLED performance. We found that a small-sized polar host molecule that possesses both high molecular diffusivities and moderate permanent dipole moment, well cancels out the polarization formed by the SOP of the emitter molecules in the EML without a disturbance of the emitter molecules' intrinsic orientation, leading to high-performance of OLEDs. Our molecular design strategy will allow emitter molecules to pull out the full potential of the EMLs in OLEDs.

"Core-Shell" Wave Function Modulation in Organic Narrowband Emitters.

Efficient red-green-blue primary luminescence with an extraordinarily narrow band and durability is crucial for advanced display applications. Recently, the emergence of multiple-resonance (MR) from short-range atomic interactions has been shown to induce extremely narrow spectral widths in pure organic emitters. However, achieving wide-range color tuning without compromising color purity remains a persistent challenge for MR emitters. Herein, the concept of electronic donor/acceptor "core-shell" modulation is proposed within a boron/nitrogen (B/N) MR skeleton, enabling the rational utilization of intramolecular charge transfer to facilitate wavelength shift. The dense B atoms localized at the center of the molecule effectively compress the electron density and stabilize the lowest unoccupied molecular orbital wave function. This electron-withdrawing core is embedded with peripheral electron-donating atoms. Consequently, doping a single B atom into a deep-blue MR framework led to a profound bathochromic shift from 447 to 624 nm (∼0.8 eV) while maintaining a narrow spectral width of 0.10 eV in this pure-red emitter. Notably, organic light-emitting diodes assisted by thermally activated delayed fluorescence molecules achieved superb electroluminescent stability, with an LT99 (99% of the initial luminance) exceeding 400 h at an initial luminance of 1000 cd m-2, approaching commercial-level performance without the assistance of phosphors.

Impact of Spontaneous Orientational Polarization on Triplet-Triplet Upconversion-Based Blue Organic Light-Emitting Diodes.

The spontaneous orientation polarization (SOP) of a permanent dipole moment of the molecule induces a giant surface potential (GSP) in an organic semiconductor film, and GSP is expected to be a crucial parameter for understanding the operational mechanism of organic light-emitting diodes (OLEDs). This study demonstrates that the voltage-dependent migration of a carrier recombination zone induced by a polar electron transporting layer (ETL) having a positive SOP causes a decline in the overall performance of the OLED in triplet-triplet upconversion (TTU) based on OLEDs. Specifically, the TTU efficiency in an OLED with 2,2',2″-(1,3,5-benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) (TPBi) as the ETL decreased by 20% due to the reduction of electrically generated triplet exciton density. This decrease resulted in a lower external electroluminescence (EL) quantum efficiency (EQE) of 5.4% at 1 mA cm-2, while the OLED with a nonpolar ETL resulted in an EQE of around 8.1% at 1 mA cm-2. We confirmed a shift in the recombination zone from the current density dependence of the EL spectra in the OLEDs. Our results indicate that the fixed carrier recombination zone near a hole transport layer and an emitting layer (HTL/EML) strongly enhanced the TTU process, while the polar EML/ETL interface induced the migration of the recombination zone depending on voltage, resulting in the decrease of triplet exciton density.

Hexacarbazolylbenzene: An Excellent Host Molecule Causing Strong Guest Molecular Orientation and the High-Performance OLEDs.

Hexacarbazolylbenzene (6CzPh), which is benzene substituted by six carbazole rings, is a simple and attractive compound. Despite the success of a wide variety of carbazole derivatives in organic light-emitting diodes (OLEDs), 6CzPh has not received attention so far. Here, excellent performances of 6CzPh are revealed as a host material in OLEDs regarding conventional host materials. Various strategies are implemented to improve the performance of OLEDs, e.g., triplet utilization by thermally activated delayed fluorescence (TADF) and phosphorescence emitters for maximizing internal quantum efficiency, and molecular orientation control for increasing outcoupling efficiency. The present host material is suited for both criteria. Robustness of the structure and sufficiently high triplet energy enables a high external quantum efficiency with a long device lifetime. Besides, the host material boosts the horizontal molecular orientations of several guest emitters. It is noteworthy that disk-shaped 4CzIPN marks the complete horizontal molecular orientations (Θh = 100%, S = -0.50). These results provide an effective way of improving efficiencies without sacrificing device durability for future OLEDs.

Visualization of Multiple-Resonance-Induced Frontier Molecular Orbitals in a Single Multiple-Resonance Thermally Activated Delayed Fluorescence Molecule.

The spatial distribution and electronic properties of the frontier molecular orbitals (FMOs) in a thermally activated delayed fluorescence (TADF) molecule contribute significantly to the TADF properties, and thus, a detailed understanding and sophisticated control of the FMOs are fundamental to the design of TADF molecules. However, for multiple-resonance (MR)-TADF molecules that achieve spatial separation of FMOs by the MR effect, the distinctive distribution of these molecular orbitals poses significant challenges for conventional computational analysis and ensemble averaging methods to elucidate the FMOs' separation and the precise mechanism of luminescence. Therefore, the visualization and analysis of electronic states with the specific energy level of a single MR-TADF molecule will provide a deeper understanding of the TADF mechanism. Here, scanning tunneling microscopy/spectroscopy (STM/STS) was used to investigate the electronic states of the DABNA-1 molecule at the atomic scale. FMOs' visualization and local density of states analysis of the DABNA-1 molecule clearly show that MR-TADF molecules also have well-separated FMOs according to the internal heteroatom arrangement, providing insights that complement existing theoretical prediction methods.

Stable pure-green organic light-emitting diodes toward Rec.2020 standard.

Manipulating dynamic behaviours of charge carriers and excitons in organic light-emitting diodes (OLEDs) is essential to simultaneously achieve high colour purity and superior operational lifetime. In this work, a comprehensive transient electroluminescence investigation reveals that incorporating a thermally activated delayed fluorescence assistant molecule with a deep lowest unoccupied molecular orbital into a bipolar host matrix effectively traps the injected electrons. Meanwhile, the behaviours of hole injection and transport are still dominantly governed by host molecules. Thus, the recombination zone notably shifts toward the interface between the emissive layer (EML) and the electron-transporting layer (ETL). To mitigate the interfacial carrier accumulation and exciton quenching, this bipolar host matrix could serve as a non-barrier functional spacer between EML/ETL, enabling the distribution of recombination zone away from this interface. Consequently, the optimized OLED exhibits a low driving voltage, promising device stability (95% of the initial luminance of 1000 cd m-2, LT95 > 430 h), and a high Commission Internationale de L'Éclairage y coordinate of 0.69. This indicates that managing the excitons through rational energy level alignment holds the potential for simultaneously satisfying Rec.2020 standard and achieving commercial-level stability.

Delocalized, asynchronous, closed-loop discovery of organic laser emitters.

Contemporary materials discovery requires intricate sequences of synthesis, formulation, and characterization that often span multiple locations with specialized expertise or instrumentation. To accelerate these workflows, we present a cloud-based strategy that enabled delocalized and asynchronous design-make-test-analyze cycles. We showcased this approach through the exploration of molecular gain materials for organic solid-state lasers as a frontier application in molecular optoelectronics. Distributed robotic synthesis and in-line property characterization, orchestrated by a cloud-based artificial intelligence experiment planner, resulted in the discovery of 21 new state-of-the-art materials. Gram-scale synthesis ultimately allowed for the verification of best-in-class stimulated emission in a thin-film device. Demonstrating the asynchronous integration of five laboratories across the globe, this workflow provides a blueprint for delocalizing-and democratizing-scientific discovery.

Bright, efficient, and stable pure-green hyperfluorescent organic light-emitting diodes by judicious molecular design.

To fulfill ultra-high-definition display, efficient and bright green organic light-emitting diodes with Commission Internationale de l'Éclairage y-coordinate ≥ 0.7 are required. Although there are some preceding reports of highly efficient devices based on pure-green multi-resonance emitters, the efficiency rolloff and device stabilities for those pure-green devices are still unsatisfactory. Herein, we report the rational design of two pure-green multi-resonance emitters for achieving highly stable and efficient pure-green devices with CIEx,ys that are close to the NTSC and BT. 2020 standards. In this study, our thermally activated delayed fluorescence OLEDs based on two pure-green multi-resonance emitters result in CIEy up to 0.74. In hyperfluorescent device architecture, the CIExs further meet the x-coordinate requirements, i.e., NTSC (0.21) and BT. 2020 (0.17), while keeping their CIEys ~ 0.7. Most importantly, hyperfluorescent devices display the high maximum external quantum efficiencies of over 25% and maximum luminance of over 105 cd m-2 with suppressed rolloffs (external quantum efficiency of ~20% at 104 cd m-2) and long device stabilities with LT95s of ~ 600 h.

A Boron, Nitrogen, and Oxygen Doped π-Extended Helical Pure Blue Multiresonant Thermally Activated Delayed Fluorescent Emitter for Organic Light Emitting Diodes That Shows Fast kRISC Without the Use of Heavy Atoms.

Narrowband emissive multiresonant thermally activated delayed fluorescence (MR-TADF) emitters are a promising solution to achieve the current industry-targeted color standard, Rec. BT.2020-2, for blue color without using optical filters, aiming for high-efficiency organic light-emitting diodes (OLEDs). However, their long triplet lifetimes, largely affected by their slow reverse intersystem crossing rates, adversely affect device stability. In this study, a helical MR-TADF emitter (f-DOABNA) is designed and synthesized. Owing to its π-delocalized structure, f-DOABNA possesses a small singlet-triplet gap, ΔEST, and displays simultaneously an exceptionally faster reverse intersystem crossing rate constant, kRISC, of up to 2 × 106 s-1 and a very high photoluminescence quantum yield, ΦPL, of over 90% in both solution and doped films. The OLED with f-DOABNA as the emitter achieved a narrow deep-blue emission at 445 nm (full width at half-maximum of 24 nm) associated with Commission Internationale de l'Éclairage (CIE) coordinates of (0.150, 0.041), and showed a high maximum external quantum efficiency, EQEmax, of ≈20%.

Understanding of complex spin up-conversion processes in charge-transfer-type organic molecules.

Despite significant progress made over the past decade in thermally activated delayed fluorescence (TADF) molecules as a material paradigm for enhancing the performance of organic light-emitting diodes, the underlying spin-flip mechanism in these charge-transfer (CT)-type molecular systems remains an enigma, even since its initial report in 2012. While the initial and final electronic states involved in spin-flip between the lowest singlet and lowest triplet excited states are well understood, the exact dynamic processes and the role of intermediate high-lying triplet (T) states are still not fully comprehended. In this context, we propose a comprehensive model to describe the spin-flip processes applicable for a typical CT-type molecule, revealing the origin of the high-lying T state in a partial molecular framework in CT-type molecules. This work provides experimental and theoretical insights into the understanding of intersystem crossing for CT-type molecules, facilitating more precise control over spin-flip rates and thus advancing toward developing the next-generation platform for purely organic luminescent candidates.

Efficient, narrow-band, and stable electroluminescence from organoboron-nitrogen-carbonyl emitter.

Organic light-emitting diodes (OLEDs) exploiting simple binary emissive layers (EMLs) blending only emitters and hosts have natural advantages in low-cost commercialization. However, previously reported OLEDs based on binary EMLs hardly simultaneously achieved desired comprehensive performances, e.g., high efficiency, low efficiency roll-off, narrow emission bands, and high operation stability. Here, we report a molecular-design strategy. Such a strategy leads to a fast reverse intersystem crossing rate in our designed emitter h-BNCO-1 of 1.79×105 s-1. An OLED exploiting a binary EML with h-BNCO-1 achieves ultrapure emission, a maximum external quantum efficiency of over 40% and a mild roll-off of 14% at 1000 cd·m-2. Moreover, h-BNCO-1 also exhibits promising operational stability in an alternative OLED exploiting a compact binary EML (the lifetime reaching 95% of the initial luminance at 1000 cd m-2 is ~ 137 h). Here, our work has thus provided a molecular-design strategy for OLEDs with promising comprehensive performance.

Three-dimensional sensing of surfaces by projection of invisible electroluminescence from organic light-emitting diodes.

Organic light-emitting diodes (OLEDs) that efficiently emit near-infrared (NIR) light and consume little power will create valuable applications for OLEDs beyond just displays. Here, we report such a NIR-OLED with high operational stability that can be used as a light source for three-dimensional sensing of object's surfaces. Using a narrow-energy-gap material as a host for producing NIR hyperfluorescence system, we fabricated a NIR-OLED exhibiting intense emission at 930 nm with a high external electroluminescence quantum efficiency of more than 1% at a current density of 100 milliamperes per square meter without any degradation even after more than 300 hours of operation. The NIR-OLEDs were integrated with dense complementary metal-oxide semiconductor circuits to make a micro-NIR-OLED projector (0.21 inch, 230,400 pixels). By actively driving the projector on a pixel by pixel and projecting their emission onto objects, we successfully scanned and sensed the surfaces in three dimensions with invisible NIR.

A donor-acceptor cage for circularly polarized TADF emission.

Herein, we report the first example of chiral donor-acceptor cage DA-2 displaying efficient circularly polarized thermally activated delayed fluorescence (CP-TADF) with |glum| values up to 2.1 × 10-3 and PLQY of 32%. A small ΔEST of 0.051 eV and quasi-parallel (θ = 6°) transition electric and magnetic dipole moments were realized from the through-space charge transfer interaction between the parallelly aligned donor and acceptor in DA-2. This D-A cage configuration has provided a novel design strategy for discovering potential efficient CP-TADF emitters.

A Rigid Multiple Resonance Thermally Activated Delayed Fluorescence Core Toward Stable Electroluminescence and Lasing.

The investigation of organic light-emitting diodes (OLEDs) and organic laser devices with thermally activated delayed fluorescence (TADF) molecules is emerging due to the potential of harnessing triplets. In this work, a boron/nitrogen multiple-resonance TADF polycyclic framework fusing carbazole units (CzBNPh) was proposed. CzBNPh exhibited a narrowband emission (<30 nm), a unity photoluminescence quantum yield, and a fast radiative rate. Consequently, CzBNPh demonstrated a low distributed feedback (DFB) lasing threshold of 0.68 µJ cm-2 . Furthermore, the stimulated emission zone of CzBNPh was effectively separated from its singlet and triplet absorption, thereby minimizing the singlet-triplet annihilation under long-pulsed excitation ranging from 20 µs to 2.5 ms. Significantly, the enhanced rigid molecular conformation, thermal stability, and photo-stability resulted in improved lasing and electroluminescence stability compared to that of 5,9-diphenyl-5,9-diaza-13b-boranaphtho[3,2,1-de]anthracene (DABNA)-core. These findings indicate the potential of CzBN-core as a promising framework for achieving long-pulsed wave and electrically-pumped lasing in the future.

Luminescence mechanism analysis of a TADF molecule showing peculiar thermal behavior.

In recent years, much attention has been paid to the development of thermally activated delayed fluorescence (TADF) materials with short delayed-fluorescence lifetimes to improve the device performances of OLEDs. In principle, by reducing the highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) overlap, while the energy difference between S1-T1 (ΔEST) and activation energy (Ea) can be reduced, and the reverse intersystem crossing rate constant (kRISC) can be accelerated, a decrease in the radiative rate constant happens, necessitating an advanced molecular design. Furthermore, a molecule based on heptazine as a parent skeleton has recently been found to have a peculiar temperature dependence of luminescence decay, suggesting a negative gap (NG) material. In this report, we show that 9-[1,4]benzoxaborino[2,3,4-kl]phenoxaborine-7-yl-1,3,6,8-tetramethyl-9H-carbazole (TMCz-BO), a donor-acceptor linked TADF molecule with a very short delay lifetime of 750 ns, exhibits a peculiar thermal behavior similar to that of NG materials based on the temperature dependence of its luminescence decay in solution.