RESUMEN
Herein, we investigated the stability of lead halide perovskites under ambient conditions after mixing the two cations Formamidinium (FA) and Cesium (Cs). The CsxFA1-xPbI3 perovskites solutions were prepared with different contents of x (0.0, 0.3, 0.5, 0.7 and 1.0) and deposited on substrates by spin-coating technique. The CsxFA1-xPbI3 films were, afterwards, characterized using the X-ray diffraction (XRD), UV-visible spectroscopy, photoluminescence (PL) spectra and scanning electron microscopy (SEM) to figure out their crystallinity, morphology, and optical properties. We noticed a stable perovskite structure for the mixed compounds unalike the pure FA and Cs films. The XRD analysis revealed, even after two weeks, the growth and good stability after two weeks of the desired black cubic α-phase perovskite structure in opposite to FAPbI3 and CsPbI3 which, respectively, showed faster degradation and transition into non-perovskite δ-phase and É£-phase no perovskite phases. The mixed perovskites Cs-FA also displayed a high absorbance especially for the ones with 30% of Cs and 70% of FA or 50% of each, with an excellent band gap energy ranging between 1.52 and 1.7 eV where FAPbI3 and CsPbI3 were showing a bandgap between 1.5 and 1.9 eV respectively. Moreover, the performance of the CsxFA1-xPbI3 based solar cells were simulated with SCAPS by using the band gaps obtained from the experimental study and after by varying the band gap, the thickness of the absorber layers and then different types of Electron Transport Layer (ETL). The simulation results revealed that the Cs0.3FA0.7PbI3 based solar cells had the highest higher efficiency around 22.36%.
