Bone architecture, bone material properties, and bone turnover in non-osteoporotic post-menopausal women with fragility fracture.

Macro- and microarchitectural, bone material property, dynamic histomorphometric, and bone turnover marker data were studied in normal bone mineral density (BMD) post-menopausal women with fragility fracture. Women with fracture had thinner iliac cortices and more homogeneous bone material properties in cortical bone than age/BMD-matched non-fracture women. Low cortical thickness and bone tissue heterogeneity in normal BMD women are associated with prevalent fragility fracture. INTRODUCTION: Bone mass (bone mineral density, (BMD)) of the spine and hip is today's best single measurement for evaluating future fragility fracture risk. However, the majority of fragility fractures occur in women with BMD T-score above the WHO osteoporotic BMD threshold of - 2.5, indicating that non-BMD endpoints may play a role in their fragility fractures. We hypothesize that in non-osteoporotic women, bone micoarchitecture, bone material properties, dynamic histomorphometric endpoints, and bone turnover markers are related to fragility fracture. METHODS: Two groups (N = 60 each) of post-menopausal women with total hip BMD T-score ranging from + 0.3 to -2.49 were recruited: fragility fracture and age/BMD-matched, non-fragility fracture women. Normal (T-score > - 0.99) and osteopenic (T-score ≤ - 1.0) BMD cohorts were designated within both the fracture and non-fracture groups. Transiliac biopsy specimens were obtained to evaluate dynamic histomorphometric and microarchitectural endpoints and bone material properties by static and dynamic nanoindentation testing. All variables for fracture and non-fracture women within each BMD cohort were compared by the Wilcoxon signed-rank test (P < 0.01). RESULTS: Compared to non-fracture/normal BMD women, fracture/normal BMD women display lower iliac cortical thickness (- 12%, P = 0.0041) and lower heterogeneity of hardness (- 27%, P = 0.0068), elastic modulus (- 35%, P = 0.0009), and storage modulus (- 23%, P = 0.0054) in the cortical bone tissue, and lower heterogeneity of hardness (- 13%, P = 0.0088) in the trabecular bone tissue. Osteopenic women had no abnormalities related to fracture status. CONCLUSION: Post-menopausal women with normal BMD and fragility fracture have low cortical thickness and heterogeneity of several bone material properties in cortical and trabecular mineralized bone tissue. These differences may explain a portion of the excess bone fragility in women with normal BMD and fragility fracture.

Heavy metals as risk factors for human diseases - a Bayesian network approach.

Modern industrial agricultural processes expose human beings to multifactorial environmental pollution including heightened levels of heavy metals. The effects of acute heavy metal exposures at toxic levels are usually known; they are tested for and treated promptly. The effects of low/moderate-level chronic heavy metal exposures are less known as they may be subclinical, and pathogenic effects may only manifest clinically over time under the disguise of a diagnosable disease or miscellaneous symptoms attributed to aging. Consequently, the health impact of low-moderate heavy metal exposure is unlikely to be identified. Furthermore, established heavy metal safety levels often fail to recognize the potential toxic effects on humans. We report in this review what is known about the sub-chronic and chronic effects of exposure to heavy metals, particularly lead, mercury, cadmium, arsenic, and nickel, and we highlight their possible effects in the brain, cardiovascular and endocrine-metabolic systems, and on reproduction.

High resolution imaging in bone tissue research-review.

This review article focuses on imaging of bone tissue to understand skeletal health with regards to bone quality. Skeletal fragility fractures are due to bone diseases such as osteoporosis which result in low bone mass and bone mineral density (BMD) leading to high risk of fragility fractures. Recent advances in imaging and analysis technologies have highly benefitted the field of biological sciences. In particular, their application in skeletal health has been of significant importance in understanding bone mechanical behavior (structure and properties) at the tissue level. While synchrotron based microCT technique has remained the gold standard for non-destructive evaluation of structure in material and biological sciences, several lab based microCT systems have been developed to provide high resolution imaging of specimens with greater access, and ease of use in laboratory settings. Lab based microCT scanners are widely used in the bone field as a standard tool to evaluate three-dimensional (3D) morphologies of bone structure at image resolutions appropriate for bone samples from small animals to bone biopsy specimens from humans. Both synchrotron and standard lab based microCT systems provide high resolution imaging ex vivo for a small sized specimen. A few X-ray based systems are also commercially available for in vivo scanning at relatively low image resolutions. Synchrotron-based CT microscopy is being used for various ultra-high-resolution image analyses using complex 3D software. However, the synchrotron-based CT technology is in high demand, allows only limited numbers of specimens, expensive, requires complex additional instrumentation, and is not easily available to researchers as it requires access to a synchrotron source which is always limited. Therefore, desktop laboratory scanners (microXCT, Zeiss/Xradia, Scanco, SkyScan. etc.), mimicking the synchrotron based CT technology or image resolution, have been developed to solve the accessibility issues. These lab based scanners have helped both material science, and the bone field to investigate bone tissue morphologies at submicron mage resolutions. Considerable progress has been made in both in vivo and ex vivo imaging towards providing high resolution images of bone tissue. Both clinical and research imaging technologies will continue to improve and help understand osteoporosis and other related skeletal issues in order to develop targeted treatments for bone fragility. This review summarizes the high resolution imaging work in bone research.

Organic matrix quality discriminates between age- and BMD-matched fracturing versus non-fracturing post-menopausal women: A pilot study.

Women with similar areal Bone Mineral Densities (BMD) may show divergent fracture incidence due to differences in bone quality. The hypothesis tested in the present pilot study is that postmenopausal (PM) women who have sustained osteoporotic fractures have altered organic matrix quality compared to those who have not. We used Raman microspectroscopy to analyze transiliac biopsies collected from fracturing (n = 6, mean age 62.5 ±â€¯7.4 yrs; Cases) and non-fracturing PM women (n = 6, age- and BMD-matched; mean age 62.2 ±â€¯7.3 yrs; Controls). Previous results show differences in intrinsic material properties by nanoindentation that are more homogenously distributed and could facilitate microcrack propagation in Cases, along with lower mineral carbonate/phosphate ratio by Fourier transform infrared spectroscopic imaging, and no differences in bone tissue mineralization by digitized microradiography. No differences between groups were seen by conventional histomorphometry. Spectra were acquired 2 µm away from previously performed nanoindents, in cortical and cancellous compartments. The determined parameters were: mineral to matrix ratio (MM), and nanoporosity (a surrogate for tissue water (TW)), glycosaminoglycan (GAG), pyridinoline (Pyd; trivalent enzymatic collagen cross-link), N(6)-carboxymethyllysine (CML; advanced glycation endproduct), and pentosidine (PEN; advanced glycation endproduct) content. ANCOVA indicated no differences in any of the spectroscopic outcomes between cancellous and cortical compartments. On the other hand, Cases had lower nanoporosity (TW) and GAG, and elevated Pyd, and CML content compared to Controls. In conclusion, the results of the present study indicate significant differences in organic matrix quality in PM women that sustain fragility fractures versus age- and BMD-matched controls, highlighting its importance as a potential independent determinant of fracture incidence.

Intrinsic material property differences in bone tissue from patients suffering low-trauma osteoporotic fractures, compared to matched non-fracturing women.

Osteoporotic (low-trauma) fractures are a significant public health problem. Over 50% of women over 50yrs. of age will suffer an osteoporotic fracture in their remaining lifetimes. While current therapies reduce skeletal fracture risk by maintaining or increasing bone density, additional information is needed that includes the intrinsic material strength properties of bone tissue to help develop better treatments, since measurements of bone density account for no more than ~50% of fracture risk. The hypothesis tested here is that postmenopausal women who have sustained osteoporotic fractures have reduced bone quality, as indicated with measures of intrinsic material properties compared to those who have not fractured. Transiliac biopsies (N=120) were collected from fracturing (N=60, Cases) and non-fracturing postmenopausal women (N=60, age- and BMD-matched Controls) to measure intrinsic material properties using the nano-indentation technique. Each biopsy specimen was embedded in epoxy resin and then ground, polished and used for the nano-indentation testing. After calibration, multiple indentations were made using quasi-static (hardness, modulus) and dynamic (storage and loss moduli) testing protocols. Multiple indentations allowed the median and variance to be computed for each type of measurement for each specimen. Cases were found to have significantly lower median values for cortical hardness and indentation modulus. In addition, cases showed significantly less within-specimen variability in cortical modulus, cortical hardness, cortical storage modulus and trabecular hardness, and more within-specimen variability in trabecular loss modulus. Multivariate modeling indicated the presence of significant independent mechanical effects of cortical loss modulus, along with variability of cortical storage modulus, cortical loss modulus, and trabecular hardness. These results suggest mechanical heterogeneity of bone tissue may contribute to fracture resistance. Although the magnitudes of differences in the intrinsic properties were not overwhelming, this is the first comprehensive study to investigate, and compare the intrinsic properties of bone tissue in fracturing and non-fracturing postmenopausal women.

Age-related periodontitis and alveolar bone loss in rice rats.

OBJECTIVE: To characterize in rice rats: (a) periodontitis (PD) progress with feeding of standard laboratory rat chow (STD) during ages 4-80 weeks; and (b) PD progress with feeding of a high sucrose-casein (H-SC) diet during young adulthood. METHODS: One group (N=12) was euthanized at age 4 weeks (Baseline). Four groups (N=8-16) consumed a STD diet from baseline and were necropsied at ages 22, 30, 52, and 80 weeks. Three groups (N=10-16) consumed an H-SC diet from baseline. Two were necropsied at ages 22 and 30 weeks, respectively. The third switched to the STD diet at age 22 weeks and was necropsied at age 30 weeks. All mandibles/maxillae were assessed by histometry for degree of periodontal inflammation (PD Score), alveolar crest height (ACH, mm), and horizontal alveolar bone height (hABH, mm2). RESULTS: In STD diet rats aged ≥30 weeks, all endpoints were worse (P<0.05) than at Baseline. In H-SC diet rats aged ≥22 weeks, all endpoints were worse than at Baseline (P<0.05). At age 22 weeks, all endpoints were worse in the H-SC group than in the STD group (P<0.05). By age 30 weeks, the STD and H-SC groups did not differ. CONCLUSIONS: 1) STD diet fed rice rats develop moderate/severe PD by age 30 weeks; 2) an H-SC diet accelerates moderate/severe PD development; and 3) switching to a STD diet does not halt/reverse PD that was accelerated by an H-SC diet. These data further clarify use of the rice rat as a PD model.

Enhanced alveolar bone loss in a model of non-invasive periodontitis in rice rats.

OBJECTIVE: The rice rat (Oryzomys palustris) develops periodontitis-like lesions when fed a diet rich in sucrose and casein (H-SC). We aimed to establish whether this model can accurately mimic the development of human periodontitis. MATERIALS AND METHODS: For this purpose, 28-day-old rice rats (15/group) were assigned to standard (STD) or H-SC diets and sacrificed after 6, 12, and 18 weeks. Jaws were processed for morphometric, histometric, histologic, histomorphometric, and micro-CT analyses. RESULTS: We found a progressive increase in horizontal alveolar bone loss (ABL) with age in maxillae of rats fed the STD diet as determined by morphometry. The H-SC diet exacerbated horizontal ABL at the palatal surface at 12 and 18 weeks. Furthermore, increased vertical ABL was detected in mandibles and maxillae of rats fed the H-SC diet for 12 and/or 18 weeks by histometry and micro-CT. Remarkably, the H-SC diet significantly increased bone remodeling at the interproximal alveolar bone of mandibles from rats fed for 6 weeks, but not in those fed for longer periods. CONCLUSIONS: These findings indicate that the H-SC diet induced a transient increase in alveolar bone remodeling, which is followed by ABL characteristic of moderate periodontitis.

Disuse-related decline in trabecular bone structure.

Sedentary life style may degrade bone mass and microstructure resulting in osteoporosis. We characterized trabecular bone structural properties to determine if the LRP5 G171V mutation will protect against disuse-related bone loss. Forty-eight adult male mice representing three genotypes (WT = wild type, KO = LRP5-knockout +/-, HBM = High bone with the LRP5 G171V mutation) were each randomly divided between control and disuse (4 week hindlimb suspension) groups. Trabecular bone volume fraction (BV/TV) declined in all the three genotypes. Trabecular thickness was lower in the HBM and LRP5 (+/-) KO disuse groups when compared to their respective controls. While the remaining measures of bone structure (Trabecular number, connectivity density, apparent and tissue density) were lower, the trabecular separation increased in the LRP5 (+/-) with disuse. Although the absolute loss in BV/TV was similar, the relative loss due to disuse was far greater in the LRP5 (+/-) mice (67%) than in the HBM mice (14%). The disuse caused 20% decrease in trabecular number and thickness for LRP5 (+/-), while the decline was between 6 and 11% for the HBM and WT mice.

Site specific bone adaptation response to mechanical loading.

Over 25 million Americans suffer from osteoporosis. Bone size and strength depends both upon the level of adaptation due to physical activity (applied load), and genetics. We hypothesized that bone adaptation to loads differs among mice breeds and bone sites. Forty-five adult female mice from three inbred strains (C57BL/6 [B6], C3H/HeJ [C3], and DBA/2J [D2]) were loaded at the right tibia and ulna in vivo with non-invasive loading devices. Each loading session consisted of 99 cycles at a force range that induced approximately 2000 microstrain (microepsilon) at the mid-shaft of the tibia (2.5 to 3.5 N force) and ulna (1.5 to 2 N force). The right and left ulnae and tibiae were collected and processed using protocols for histological undecalcified cortical bone slides. Standard histomorphometry techniques were used to quantify new bone formation. The histomorphometric variables include percentage mineralizing surface (%MS), mineral apposition rate (MAR), and bone formation rate (BFR). Net loading response [right-left limb] was compared between different breeds at tibial and ulnar sites using two-way ANOVA with repeated measures (p<0.05). Significant site differences in bone adaptation response were present within each breed (p<0.005). In all the three breeds, the tibiae showed greater percentage MS, MAR and BFR than the ulna at similar in vivo load or mechanical stimulus (strain). These data suggest that the bone formation due to loading is greater in the tibiae than the ulnae. Although, no significant breed-related differences were found in response to loading, the data show greater trends in tibial bone response in B6 mice as compared to D2 and C3 mice. Our data indicate that there are site-specific skeletal differences in bone adaptation response to similar mechanical stimulus.

Gender specific LRP5 influences on trabecular bone structure and strength.

A mutation in LRP5 (low-density lipoprotein receptor-related protein 5) has been shown to increase bone mass and density in humans and animals. Transgenic mice expressing the LRP5 mutation (G171V) demonstrate an increase in bone mass as compared to non-transgenic (NTG) littermates. This study evaluated LRP5 gene and gender-related influences on the structural and biomechanical strength properties of trabecular and cortical bone in femurs and vertebrae (L5) of 17-week-old mice. Micro-computed tomography was used to evaluate the trabecular bone structure of distal femurs and vertebrae ex vivo. Mechanical testing of the trabecular bone in the distal femur was done to determine biomechanical strength. Differences due to genotype and gender were tested using two-way ANOVA at a significance level of p<0.05. Trabecular bone structural parameters (BV/TV, trabecular thickness, number, etc.) at the distal femur, femoral neck, and vertebral body sites were greater in the transgenic as compared to the NTG mice. In addition, vertebral cortical thickness and trabecular strength parameters (ultimate and yield loads, stiffness, ultimate and yield stresses) in the distal femur were greater in the transgenic mice as compared to NTG. The increasing trends of cortical thickness were also noted in the transgenic mice as compared to NTG. Within LRP5 (G171V) mutant mice, there were significant gender-related differences in some of the trabecular bone structural parameters at all the sites (distal femur, femoral neck, and vertebral body). However, unlike trabecular structural parameters, the gender-specific differences were not found in the trabecular strength of LRP5 transgenic mice. In summary, these findings suggest that the LRP5 (G171V) mutation results in greater trabecular bone structure and strength at both the distal femurs and vertebral bodies as compared to NTG. In addition, only the trabecular structure parameters were affected by gender within the LRP5 (G171V) mutation.

Transmenopausal changes in the trabecular bone structure.

INTRODUCTION: Post-menopausal osteoporosis is a disorder of excess skeletal fragility, due partly to changes in bone microstructure. Menopause is known to result in bone loss and reduction in bone mechanical strength. However, the mechanism and nature of microstructural changes at menopause need more detailed description and analyses. The overall hypothesis for this analysis is that the variables describing trabecular bone micro-architecture will be affected by changes in the hormonal status of women just prior to, and early after, last menses, and that volumetric bone density, and trabecular structure will decline significantly. The study was designed to capture true longitudinal transmenopausal changes in three-dimensional (3-D) trabecular bone architecture. Currently, minimal data exist regarding these features. MATERIALS AND METHODS: Transilial biopsies specimens were obtained from healthy pre-menopausal women (age >46), and repeated at 12 months after the last menstrual period. Bone architecture was quantified in 38 paired specimens using micro-computed tomography (micro-CT-40, Scanco) techniques. Bone biopsies were embedded for histomorphomteric analyses and parts of the analyses have been published elsewhere. Embedded bone biopsies were scanned at 30-mum resolution such that the region of interest was similar to that in the two-dimensional (2-D) histomorphometric analyses. Paired t-tests were used to compare the pre- and post-menopausal bone structural data from each technique. RESULTS: There was good correlation between standard histomorphometric (2-D) and micro-CT (3-D) measurements. Most of the variables characterizing bone structure in post-menopausal women (from micro-CT) significantly decreased (BV/TV, trabecular number, apparent and tissue density). In addition, both trabecular spacing (Tb.S) and the structure model index (SMI) increased in the post-menopausal women suggesting transformation of trabecular bone from plate- to rod-like structure. The 3-D trabecular connectivity density (Conn.D) was negatively correlated with activation frequency (Ac.f). CONCLUSIONS: These data suggest that 3-D micro-CT measurements (longitudinal) are comparable to those of standard histomorphometry, and that most of the bone structural measurements are sensitive to changes in women's hormonal status across menopause.

Decreased bone strength in HLA-B27 transgenic rat model of spondyloarthropathy.

OBJECTIVE: To investigate the nature of osteopenia/osteoporosis in spondyloarthropathy, an inflammatory disorder, using the HLA-B27 transgenic rat model. METHODS: HLA-B27 transgenic rats were housed individually and sacrificed at the peak of their disease (8-month-old). The spine and femurs were removed and stored in saline at -20 degrees C until analysis. The bone structure and strength were determined using a micro-computed tomography (micro-CT) device (Scanco Medical) and mechanical testing (Instron 5543). Vertebral bodies and femurs were scanned to determine trabecular structural properties in terms of bone volume (BV/TV), trabecular thickness, and spacing. After scanning, the mid-shaft femurs were subjected to a 3-point bending test (along anterior-posterior direction), the femoral necks were tested in bending, and the vertebral bodies (L4) were tested in compression. Structural (ultimate/yield load, stiffness) and apparent material (ultimate/yield stress, modulus) strength parameters were then determined. RESULTS: The majority of the bone structural and strength parameters were significantly lower (P < 0.05) in the HLA-B27 transgenic rats as compared with control littermates. Micro-CT data suggested that the transgenic animals had lower BV/TV and trabecular thickness in their vertebral bodies. The poor trabecular structure observed in HLA-B27 rats is also indicative of the poor biomechanical strength properties in the vertebral bodies as well. CONCLUSION: The HLA-B27 transgenic rats develop bone fragility similar to that seen in spondyloarthropathy and may be an important model for the study of osteoporosis in spondyloarthropathy.

Bone biomechanical properties in EP4 knockout mice.

Among the four prostaglandin E receptor subtypes, EP(4) has been implicated as an important regulator of both bone formation and bone resorption; however, the integrated activities of this receptor on bone biomechanical properties have not been examined previously. This study compared the bone biomechanical properties of EP(4) knockout (KO) transgenic mice to strain-matched wild-type (WT) controls. We examined two groups of adult female mice: WT (n = 12) and EP(4) KO (n = 12). Femurs were tested in three-point bending and the lumbar-4 (L4) vertebral body by compression. Distal femur and vertebral body trabecular bone architecture were quantified using micro-computed tomography. Biomechanical structural parameters (ultimate/yield load, stiffness) were measured and apparent material parameters (ultimate/yield stress, modulus) calculated. Body weights and bone sizes were not different between EP(4) KO and WT mice (P > 0.05, Student's t-test). EP(4) KO mice exhibited reduced structural (ultimate/yield load) and apparent material (ultimate/yield stress) strength in the femoral shaft and vertebral body compared to WT (P < 0.05). Vertebral body stiffness and femoral neck ultimate load (structural strength) were marginally lower in EP(4) KO than that in WT mice (P < 0.1). In addition, EP(4) KO mice have smaller distal femur and vertebral bone volume to total volume (BV/TV) trabecular thickness than WT mice (P < 0.05). These results suggest that the prostaglandin receptor EP(4) has an important role in determining biomechanical competence in the mouse skeleton. Despite similar bone size, the absence of an EP(4) receptor may have removed a necessary link for bone adaptation pathways, which resulted in relatively weaker bone properties.

Bone biomechanical property deterioration due to tobacco smoke exposure.

Tobacco smoking has been implicated in the development of osteoporosis and early onset of menopause in women smokers. We measured various biomechanical properties of femurs and tibiae obtained from smoke-exposed and control mice to determine cigarette smoke influences on bone mass, structure, and strength. Growing female C57BL mice were exposed to sidestream cigarette smoke in a whole-body exposure chamber, set at 30 +/- 2 mg smoke particulates/m3 for 4 hours/day and 5 days/week for 12 consecutive weeks. Elevated levels of urinary cotinine and pulmonary ethoxyresorufin deethylase activity in smoke-exposed mice confirmed their effective exposure to cigarette smoke. There were no differences in body weight and physical size (length, medial-lateral and anterior-posterior widths, midshaft cortical area and thickness) of femurs and tibiae between smoke-exposed and control mice. The femoral mid-shaft yield load, stiffness, yield stress, and modulus were, respectively 8%, 13%, 10%, and 14% lower (P < 0.05) in smoke-exposed compared to control mice. The ultimate load and stress in mid-shaft femurs showed decreasing trends (P < 0.1) in smoke-exposed mice. In the femoral neck, the ultimate load and stiffness were 9% and 12% lower (P < 0.05) in smoke-exposed mice, respectively. Further, the ash-to-dry bone weight ratio was smaller ( approximately 6%, P < 0.05), and micro-computed tomographic scanning of distal femoral bone volume/total volume (%) and trabecular thickness showed decreasing trends in smoke-exposed mice compared to the control group. We conclude that exposure to tobacco smoke deteriorates some of the biomechanical properties of bone in growing female mice.

Soy isoflavones may protect against orchidectomy-induced bone loss in aged male rats.

Evidence from several studies suggests that soy protein and/or its isoflavones may have beneficial effects on bone in postmenopausal women and animal models who have osteoporosis. The present study examined the dose-dependent effects of soy isoflavones in the context of soy protein or casein on the male skeleton. Thirteen-month-old male Fisher 344 rats were orchidectomized (ORX; 5 groups) or sham-operated (Sham; 1 group) and immediately placed on dietary treatments for 180 days. Diets were semi-purified and the protein source was either casein (Sham and ORX; controls), casein with two added doses of isoflavones (Iso1; 600 mg/kg diet and Iso2; 1200 mg/kg diet), soy protein with normal isoflavones content (Soy; 600 mg/kg diet), or soy protein with added isoflavones (Soy+; 1200 mg/kg diet). A 7% loss of whole body bone mineral density (BMD) was observed due to orchidectomy; however, the ORX induced BMD loss was significantly reduced to 4.3 and 4.7 % with the Soy and Soy+, respectively. Both doses of isoflavones in conjunction with casein also reduced the loss of whole body BMD, albeit not significantly different from ORX control animals. Trabecular bone histomorphometric analysis of the proximal tibia further supported the bone-sparing role of soy isoflavones as indicated by higher percent bone volume and trabecular number, and lower trabecular separation. We conclude that isoflavones exert modest beneficial effects on the male skeleton whether provided with casein or a soy protein.

Differences in vertebral structure and strength of inbred female mouse strains.

This study assessed mouse strain-related differences in vertebral biomechanics and histomorphometry in inbred mice strains shown to differ in bone mineral content (BMC) and areal density (BMD) (as measured by pDEXA). Lumbar vertebrae L3 to L5 were collected from three mice strains (C3H/HeJ[C3], C57BL/6J[B6], and DBA/2J[D2], n=12/strain, 4-month-old female, 22.2 +/- 0.3g). BMC and BMD were measured in L3 and L4 using peripheral dual energy x-ray absorptiometry. The L4 vertebral body was then mechanically tested in compression to determine structural properties (ultimate/yield load, stiffness) from load-displacement curves and derive apparent material properties (ultimate/yield stress, and modulus of elasticity). L5 was processed for histomorphometric evaluation. Vertebral BMC and BMD were greater in C3 than in B6 and D2 mice. Vertebral trabecular/cancellous bone volume was smaller in C3 than in D2 and B6 mice. Trabecular bone formation rates were greater in D2 than in B6 and C3 mice. Osteoid surface was smaller in C3 mice than in B6 and D2 mice. Differences in osteoclast and mineralizing surfaces were not detected among the three mouse strains. In addition, there were no significant differences in biomechanical properties between the three strains. Despite the greatest BMC and areal BMD in C3 mice, the lack of strain-related differences in vertebral body strength data suggests that the biomechanical properties may be affected by the bone distribution and/or complex combination of cortical and cancellous bone at this site.

Bone intrinsic material properties in three inbred mouse strains.

This study assessed genetically based differences in intrinsic material properties of both cortical and cancellous bone in adult females of three inbred mouse strains [C57BL/6J (B6), DBA/2J (D2), C3H/HeJ (C3)]. These mouse strains have previously been shown to differ in bone mineral content (BMC) and density (BMD). Distal femoral cancellous bone and midshaft cortical bone in femurs and tibias were assessed for intrinsic material properties using nanoindentation technique. The intrinsic material properties tested were modulus (E(b)) and hardness (H) of the midshaft femoral and tibial cortical bone cross sections and of cancellous bone in the distal femur. Both femoral and tibial cortical bone intrinsic material properties were different among the three inbred mouse strains. Femoral modulus and tibial hardness in cortical bone and hardness in cancellous bone were either greatest or showed greater trends in C3 mice as compared to both D2 and B6. Cancellous bone modulus was similar among the three mouse strains. With the exception of the D2 mice, the femoral and tibial cortical modulus were similar within each mouse strain. The tibial cortical modulus was smaller than the femoral cortical modulus for D2 mouse strain. The cortical hardness was greater in tibiae compared with that in femora within each mouse strain. The nanoindentation data suggest that cortical and cancellous intrinsic material properties are influenced by the genetic background of the inbred mouse strains. The inbred mouse strain-related intrinsic material property phenotype can be used to locate responsible quantitative trait loci (QTLs) in future studies of recombinant inbred mouse strains.

Bone biomechanical properties in LRP5 mutant mice.

The mutation responsible for the high bone mass (HBM) phenotype has been postulated to act through the adaptive response of bone to mechanical load resulting in denser and stronger skeletons in humans and animals. The bone phenotype of members of a HBM family is characterized by normally shaped bones that are exceptionally dense, particularly at load bearing sites [Cancer Res. 59 (1999) 1572]. The high bone mass (HBM) mutation was identified as a glycine to valine substitution at amino acid residue 171 in the gene coding for low-density lipoprotein receptor-related protein 5 (LRP5) [Bone Miner. Res. 16(4) (2001) 758]. Thus, efforts have focused on the examination of the role of LRP5 and the G171V mutation in bone mechanotransduction responses [J. Bone Miner. Res 18 (2002) 960]. Transgenic mice expressing the human G171V mutation have been shown to have skeletal phenotypes remarkably similar to those seen in affected individuals. In this study, we have identified differences in biomechanical (structural and apparent material) properties, bone mass/ash, and bone stiffness of cortical and cancellous bone driven by the G171V mutation in LRP5. As in humans, the LRP5 G171V plays an important role in regulating bone structural phenotypes in mice. These bone phenotypes include greater structural and apparent material properties in HBM HET as compared to non-transgenic littermates (NTG) mice. Body size and weight in HBM HET were similar to that in NTG control mice. However, the LRP5 G171V mutation in HET mice results in a skeleton that has greater structural (femoral shaft, femoral neck, tibiae, vertebral body) and apparent material (vertebral body) strength, percent bone ash weight (ulnae), and tibial stiffness. Despite similar body weight to NTG mice, the denser and stiffer bones in G171V mice may represent greater bone formation sensitivity to normal mechanical stimuli resulting in an overadaptation of skeleton to weight-related forces.

Effects of nicotine on bone mass and strength in aged female rats.

This study investigated the effects of nicotine on bone mass and biomechanical properties in aged, estrogen-replete (sham-operated) and estrogen-deplete (ovariectomized) female rats. Eight month old, retired breeder, sham-operated and ovariectomized Sprague-Dawley rats were left untreated for 12 weeks to establish cancellous osteopenia in the ovariectomized group. The animals were then administered saline, low dose nicotine (6.0 mg/kg/day) or high dose nicotine (9.0 mg/kg/day) via osmotic minipumps for 12 weeks. Vertebrae and femora were collected at necropsy for determination of bone mass and strength. As expected, ovariectomy had a negative effect on most endpoints evaluated. Vertebral body bone mineral content (BMC) and density (BMD) and the structural (ultimate load and yield load) and material (ultimate stress, yield stress, and flexural modulus of elasticity) strength properties were lower in the OVX rats than in the sham-operated rats. Femoral diaphysis BMC, BMD, ultimate load, and flexural modulus were also lower in the OVX rats than in the sham-operated rats. The nicotine doses administered resulted in serum nicotine levels that averaged 1.5-4.5-fold greater than those observed in heavy smokers. Despite the high doses used, nicotine had no effect on vertebral BMC, BMD, or any of the structural and material strength properties in either the OVX or the Sham rats. In addition, nicotine had no effect on femoral diaphysis BMC, BMD, ultimate load, stiffness, ultimate stress, or flexural modulus. Femoral yield load and stress were lower in low dose nicotine-treated rats than in vehicle-treated rats. However, differences were not detected between the high dose nicotine- and vehicle-treated rats for either femoral yield load or stress. The results suggest that tobacco agents other than nicotine are responsible for the decreased bone density and increased fracture risk as observed in smokers.

Bone adaptation response to sham and bending stimuli in mice.

This study presents inbred-strain-related differences in tibial bone adaptation response to low-force loading in four-point bending and sham (pad pressure) arrangements in mice. Our previous work in mice has shown that at relatively high but equal bending forces (9 N or a bending moment of 16.88 N-mm), C57BL/6J mice respond with significantly greater bone formation than C3H/HeJ mice. Because of high tibial strains, the majority of the bone response in our previous study was woven bone. In this, study, we reduced the loading forces to 5 N or a bending moment of 9.38 N-mm (to decrease the woven-bone formation response) and investigated inbred-strain-related bone adaptation differences resulting from bending and sham loading (reported here for the first time in C57BL/6J) in these mice. Twenty-four female mice within each inbred mouse strain (C3H/HeJ [C3H] and C57BL/6J [B6]) were randomly divided into the two loading groups (12 per group sham and bending, total of 48 mice). All of the external loading was done for 36 cycles at 2 Hz, 3 d/wk for 3 wk. The bone adaptation response at lower forces exhibited a pattern similar to that seen for the higher forces in the previous study, suggesting that the patterns of bone adaptation were inbred strain related and independent of bending force magnitude. The bending-related periosteal mineral apposition surface (pMS) and mineral apposition rate (MAR) were respectively 40% and 45% greater in B6 than in C3H. The cortical bone adaptation response to bending was greater when compared to sham or pad pressure for each inbred strain of mice, suggesting that the majority of the bone adaptation response was the result of bending stimulus and not local pressure from pad contact. In addition, regardless of loading arrangement (sham or bending), the bone adaptation response in C57BL/6J mice was greater than C3H/HeJ.