Silicon Clathrate-Supported Catalysts with Low Work Functions for Ammonia Synthesis.

Diamond-type silicon has a work function of ≈4.8 eV, and conventional n- or p-type doping modifies the value only between 4.6 and 5.05 eV. Here, it is shown that the alkali clathrates AxSi46 have substantially lower work functions approaching 2.6 eV, with clear trends between alkali electropositivity and clathrate cage size. The low work function enables alkali clathrates such as K8Si46 to be effective Haber-Bosch catalyst supports for NH3 synthesis. The catalytic properties of Si, Ge, and Sn-based clathrates are investigated while supporting Fe and Ru on the surface. The activity largely scales with the work function, and low activation energies below 60 kJ mol-1 are observed due to strong electron donation effects from the support. Ru metal and Sn clathrates seem to be unsuitable for stability issues. Compared to other similar hydride/electride catalysts, the simple structure and composition combined with stability in air/water make a systematic study of these clathrates possible and open the door to other electron-rich Zintl phases and related intermetallics as low-work function materials suitable for catalysis. The observed low work function may also have implications for other existing electronic applications.

Atomically Dispersed NiNx Site with High Oxygen Electrocatalysis Performance Facilely Produced via a Surface Immobilization Strategy.

Nonprecious-metal heterogeneous catalysts with atomically dispersed active sites demonstrated high activity and selectivity in different reactions, and the rational design and large-scale preparation of such catalysts are of great interest but remain a huge challenge. Current approaches usually involve extremely high-temperature and tedious procedures. Here, we demonstrated a straightforward and scalable preparation strategy. In two simple steps, the atomically dispersed Ni electrocatalyst can be synthesized in a tens grams scale with quantitative yield under mild conditions, and the active Ni sites were produced by immobilizing preorganized NiNx complex on the substrate surface via organic thermal reactions. This catalyst exhibits excellent catalysis performances in both oxygen evolution and reduction reactions. It also exhibited tunable catalysis activity, high catalysis reproducibility, and high stability. The atomically dispersed NiNx sites are tolerant at high Ni concentration, as the random reactions and metal nanoparticle formation that generally occurred at high temperatures were avoided. This strategy illustrated a practical and green method for the industrial manufacture of nonprecious-metal single-site catalysts with a predictable structure.

Topochemical Synthesis of Ca3 CrN3 H Involving a Rotational Structural Transformation for Catalytic Ammonia Synthesis.

Topochemical reactions have led to great progress in the discovery of new metastable compounds with novel chemical and physical properties. With these reactions, the overall crystal structure of the host material is generally maintained. Here we report a topochemical synthesis of a hexagonal nitride hydride, h-Ca3 CrN3 H, by heating an orthorhombic nitride, o-Ca3 CrN3 , under hydrogen at 673 K, accompanied by a rotational structural transformation. The hydrogen intercalation modifies the Ca-N rock-salt-like atomic packing in o-Ca3 CrN3 to a face-sharing octahedral chain in h-Ca3 CrN3 H, mimicking a "hinged tessellation" movement. In addition, the h-Ca3 CrN3 H exhibited stable ammonia synthesis activity when used as a catalyst.

Titanium methyl tamed on silica: synthesis of a well-defined pre-catalyst for hydrogenolysis of n-alkane.

Alkylation of Ti(CH3)2Cl21 by MeLi gives the homoleptic Ti(CH3)42 for the first time in the absence of any coordinating solvent. The reaction of 2 with silica pretreated at 700 °C (SiO2-700) gives two inequivalent silica-supported Ti-methyl species 3. Complex 3 was characterized by IR, microanalysis (ICP-OES, CHNS, and gas quantification), and advanced solid-state NMR spectroscopy (1H, 13C, DQ, TQ, and HETCOR). The catalytic activity of the pre-catalyst 3 is investigated in low-temperature hydrogenolysis of propane and n-butane with TONs of 419 and 578, respectively.

Docking of tetra-methyl zirconium to the surface of silica: a well-defined pre-catalyst for conversion of CO2 to cyclic carbonates.

The metal complex (Zr(CH3)4(THF)2) has been fully synthesized, characterized and grafted onto partially dehydroxylated silica to give two surface species [([triple bond, length as m-dash]Si-O-)Zr(CH3)3(THF)2] (minor) and [([triple bond, length as m-dash]Si-O-)2Zr(CH3)2(THF)2] (major) which have been characterized by SS NMR, IR, and elemental analysis. These supported pre-catalysts exhibit the best conversion of CO2 to cyclic carbonates, as compared to the previously reported SOMC catalysts.

Ligand-free gold nanoclusters confined in mesoporous silica nanoparticles for styrene epoxidation.

We present a novel approach to produce gold nanoclusters (Au NCs) in the pores of mesoporous silica nanoparticles (MSNs) by sequential and controlled addition of metal ions and reducing agents. This impregnation technique was followed to confine Au NCs inside the pores of MSNs without adding external ligands or stabilizing agents. TEM images show a uniform distribution of monodisperse NCs with an average size of 1.37 ± 0.4 nm. Since the NCs are grown in situ in MSN pores, additional support and high temperature calcination are not required to use them as catalysts. The use of Au NC/MSNs as a catalyst for the epoxidation of styrene in the presence of tert-butyl hydroperoxide (TBHP) as a terminal oxidant resulted in an 88% conversion of styrene in 12 h with a 74% selectivity towards styrene epoxide. Our observations suggest that this remarkable catalytic performance is due to the small size of Au NCs and the strong interaction between gold and the MSNs. This catalytic conversion is environmentally friendly as it is solvent free. We believe our synthetic approach can be extended to other metal NCs offering a wide range of applications.

A strategy to convert propane to aromatics (BTX) using TiNp4 grafted at the periphery of ZSM-5 by surface organometallic chemistry.

The direct conversion of propane into aromatics (BTX) using modified ZSM-5 was achieved with a strategy of "catalysis by design". In contrast to the classical mode of action of classical aromatization catalysts which are purely based on acidity, we have designed the catalyst associating two functions: One function (Ti-hydride) was selected to activate the C-H bond of propane by σ-bond metathesis to further obtain olefin by ß-H elimination and the other function (Brønsted acid) being responsible for the oligomerization, cyclization, and aromatization. This bifunctional catalyst was obtained by selectively grafting a bulky organometallic complex of tetrakis(neopentyl)titanium (TiNp4) at the external surface (external silanol ([triple bond, length as m-dash]Si-OH) group) of [H-ZSM-5300] to obtain [Ti/ZSM-5] catalyst 1. This metal was chosen to activate the C-H bond of paraffin at the periphery of the ZSM-5 while maintaining the Brønsted acid properties of the internal [H-ZSM-5] for oligomerization, cyclization, and aromatization. Catalyst 2 [Ti-H/ZSM-5] was obtained after treatment under H2 at 550 °C of freshly prepared catalyst 1 ([Ti/ZSM-5]) and catalyst 1 was thoroughly characterized by ICP analysis, DRIFT, XRD, N2-physisorption, multinuclear solid-state NMR, XPS and HR-TEM analysis including STEM imaging. The conversion of propane to aromatics was studied in a dynamic flow reactor. With the pristine [H-ZSM-5300] catalyst, the conversion of propane is very low. However, with [Ti-H/ZSM-5] catalyst 2 under the same reaction conditions, the conversion of propane remains significant during 60 h of the reaction (ca. 22%). Furthermore, the [Ti-H/ZSM-5] catalyst shows a good and stable selectivity (55%) for aromatics (BTX) of time on stream. With 2, it was found that the Ti remains at the periphery of the [H-ZSM-5] even after reaction time.

Thermal decomposition of lignocellulosic biomass in the presence of acid catalysts.

Transformation of lignocellulosic biomass to biofuels involves multiple processes, in which thermal decomposition, hydrotreatment are the most central steps. Current work focuses on the impact of several solid acids and Keggin-type heteropolyacids on the decomposition temperature (Td) of pine wood and the characterization of the resulted products. It has been observed that a mechanical mixture of solid acids with pine wood has no influence on Td, while the use of heteropolyacids lower the Td by 100°C. Moreover, the treatment of biomass with a catalytic amount of H3PW12O40 leads to formation of three fractions: solid, liquid and gas, which have been investigated by elemental analysis, TGA, FTIR, GC-MS and NMR. The use of heteropolyacid leads, at 300°C, to a selective transformation of more than 50 wt.% of the holocellulose part of the lignocellulosic biomass. Moreover, 60 wt.% of the catalyst H3PW12O40 are recovered.