Effect of Shearing and Annealing on the Pasting Properties of Different Starches.

The functional characteristics of starch can be altered by shear force, which makes the impact on its microstructure of great importance to the food industry. This study investigated the effects of freeze-drying on the gel texture, pasting capabilities, and swelling power of starches made from sweet potatoes (SP), chickpeas (CP), and wheat (WS) combined with Cordia (CG) and Ziziphus gum (ZG). The samples were annealed in water without shearing and in a rapid visco-analyzer (RVA) for 30 min at 60 °C while being spun at 690 rpm. Both native and freeze-dried samples were mixed with 1% or 3% ZG and CG. After annealing, the starches were examined using a texture analyzer and RVA. The results showed that freeze-drying had a substantial (p > 0.05) impact on the starch granule, in addition to the effect of annealing. The peak viscosity of freeze-dried native CP and SP starches increased, but the peak viscosity of freeze-dried wheat starch decreased. The setbacks for CP and WS increased, whereas the setbacks for SP varied slightly. Furthermore, it was demonstrated that annealing in an RVA exhibited a substantially lower peak viscosity than annealing in a water bath; the RVA's shearing effect may have been the cause of this difference. Cordia gum fared better than ZG in terms of peak viscosity, although ZG significantly reduced setback in comparison to CG. Among the various blends, the native WB sample had the lowest hardness (100 ± 4.9 g), while the freeze-dried WB SP sample had the greatest (175.5 ± 4.8 g). Shearing of starches broke up the granules into smaller pieces, which made them gel at lower temperatures. This could be a good thing when they are needed for food uses that require little cooking.

Effect of Germinated Sorghum Extract on the Physical and Thermal Properties of Pre-Gelatinized Cereals, Sweet Potato and Beans Starches.

Starches from different botanical sources are affected in the presence of enzymes. This study investigated the impact of α-amylase on several properties of pre-gelatinized starches derived from chickpea (Cicer arietinum L.), wheat (Triticum aestivum L.), corn (Zea mays L.), white beans (Phaseolus vulgaris), and sweet potatoes (Ipomoea batatas L.). Specifically, the water holding capacity, freezable water content, sugar content, and water sorption isotherm (adsorption and desorption) properties were examined. The source of α-amylase utilized in this study was a germinated sorghum (Sorghum bicolor L. Moench) extract (GSE). The starch samples were subjected to annealing at temperatures of 40, 50, and 60 °C for durations of either 30 or 60 min prior to the process of gelatinization. A significant increase in the annealing temperature and GSE resulted in a notable enhancement in both the water-holding capacity and the sugar content of the starch. The ordering of starches in terms of their freezable water content is as follows: Chickpea starch (C.P.S) > white beans starch (W.B.S) > wheat starch (W.S) > chickpea starch (C.S) > sweet potato starch (S.P.S). The Guggenheim-Anderson-de Boer (GAB) model was only employed for fitting the data, as the Brunauer-Emmett-Teller (BET) model had a low root mean square error (RMSE). The application of annealing and GSE treatment resulted in a shift of the adsorption and desorption isotherms towards greater levels of moisture content. A strong hysteresis was found in the adsorption and desorption curves, notably within the water activity range of 0.6 to 0.8. The GSE treatment and longer annealing time had an impact on the monolayer water content (mo), as well as the C and K parameters of the GAB model, irrespective of the annealing temperature. These results can be used to evaluate the applicability of starch in the pharmaceutical and food sectors.

Dough Performance and Quality Evaluation of Cookies Prepared from Flour Blends Containing Cactus (Opuntia ficus-indica) and Acacia (Acacia seyal) Gums.

Acacia (AG) and cactus gums (CG) were mixed into wheat flour at the 3% and 6% levels. The flour blends were tested for their pasting, dough development, and extensibility behaviors. The blends were used to make cookies, which were then evaluated for their physical, textural, and sensory qualities. Both types of gum reduced the setback viscosities, water absorption, and farinograph quality numbers while increasing the water retention capacity, dough development time, and extensibility. The thickness and diameter of the cookies decreased in the presence of the cactus gum, while the acacia gum resulted in greater thickness and diameter. The addition of more gums increased the hardness of the cookies while decreasing their fracturability. All the cookie types were acceptable for all the sensory attributes studied. When compared to the control, the panelists preferred the color of the cookies with a higher level of gum. Overall, the presence of gums in the formulation resulted in the development of cookies with improved technological and sensory attributes. Likewise, the cookies with higher levels of gum can deliver 6% more soluble fiber without compromising their overall acceptability.

Exploring the Role of Acacia (Acacia seyal) and Cactus (Opuntia ficus-indica) Gums on the Dough Performance and Quality Attributes of Breads and Cakes.

Two hydrocolloids, acacia gum and cactus gum, were tested in the current study to see if they could improve the quality of the dough or have an effect on the shelf life of pan bread and sponge cake. Both gums considerably (p < 0.05) enhanced the dough development time, softness, and mixing tolerance index while decreasing the water absorption. Although the dough was more stable with the addition of acacia gum than with cactus gum, the control sample had the highest peak, final, breakdown, and setback viscosities. Acacia gum, on the other hand, resulted in a higher wheat-flour-slurry pasting temperature (84.07 °C) than cactus gum (68.53 °C). The inclusion of both gums, particularly 3%, reduces the gel's textural hardness, gumminess, chewiness, springiness, and adhesiveness. Lightness (L*) and yellowness (b*) were both increased by the addition of acacia gum to bread and cake, whereas the addition of cactus gum increased both color parameters for cakes. The use of acacia gum increased the bread and cake's volume. Cactus gum, on the other hand, caused a decrease in bread hardness after 24 h and 96 h. The cake containing acacia gum, on the other hand, was the least stiff after both storage times. Similarly, sensory attributes such as the crumb color and overall acceptability of the bread and cake were improved by 3% with acacia gum. For these and other reasons, the addition of cactus and acacia gums to bread and cake increased their organoleptic qualities, controlled staining, and made them softer.

Effect of Ziziphus and Cordia Gums on Dough Properties and Baking Performance of Cookies.

The influence of 2% and 5% Cordia (CG) and Ziziphus (ZG) gums on dough characteristics and cookie quality was investigated. Micro-DoughLab, a texture analyzer (TA), a rapid viscoanalyzer (RVA), and solvent retention capacity were used to examine the effect of CG and ZG gums on dough physicochemical parameters (SRC) and cookie quality. The diameter, thickness, spread, and sensory evaluation of cookies were evaluated. With the addition of CG and ZG, dough softness, mixing time, and mixing tolerance index (MTI) increased, whereas stability and water absorption decreased. TA data showed that adding gums resulted in softer and less sticky doughs than the control, whereas RVA data showed that adding CG resulted in a significant increase in peak viscosity, but no change in flour gel setback. In comparison to the control and CG samples, the ZG samples exhibited the most dough extensibility. The thickness and diameter of the cookies increased but the spread decreased, due to the added gums. The gum-containing cookies had a lower overall acceptability by panelists than the control, although only by a small margin. Gum-containing cookies, on the other hand, can deliver up to 5% soluble fiber.

Functionality of Cordia and Ziziphus Gums with Respect to the Dough Properties and Baking Performance of Stored Pan Bread and Sponge Cakes.

The functionality of hydrocolloids of different origins, gum Cordia (GC), and gum ziziphus (GZ) on pan bread and sponge cake quality and their potential use in retarding the staling process have been studied. The effects of the gums were determined by assessing the pasting qualities of wheat flour slurry, dough properties, and the finished product. After 24 and 96 h of storage, investigations were conducted on the finished product. Micro-doughLab was used to assess dough mixing qualities, and a texture profile analysis (TPA) test was used to assess the texture. A hedonic sensory test of texture, scent, taste, color, and general approval was also conducted. The type of gum used had a significant impact on the physical properties of the bread and cake and their evolution through time. Reduced amylose retrogradation was demonstrated by the lower peak viscosity and substantially lower setback of wheat flour gels, which corresponded to lower gel hardness. Gums were superior at increasing the bread loaf volume, especially GZ, although gums had the opposite effect on cake volume. After both storage periods, the hardness of the bread and cake was much lower than that of the control. Except when 2% GC was used, adding GC and GZ gums to bread and cake invariably increased the overall acceptability of the product. In terms of shelf-life, GZ was able to retain all texture parameters, volume, and general acceptability close to the control after storage.

Relationship between Dough Properties and Baking Performance of Panned Bread: The Function of Maltodextrins and Natural Gums.

The effectiveness of hydrocolloids (2% maximum in various combinations) from various sources, including maltodextrins (MD) with polymerization degree (DP) 18 and ziziphus gum (ZG), on the dough properties and quality of panned bread, as well as the possibility of using them to delay the bread staling process, have been investigated after 24, 72, and 96 h of storage. By evaluating the pasting capabilities of wheat flour slurry, dough properties, and the final product, the effects of the ziziphus gum (ZG) and maltodextrins (MD) were ascertained. A TA-TXT texture analyzer, a texture profile analysis test, and Micro-doughLab were used to evaluate the dough mixing properties. Additionally, a hedonic sensory evaluation of the overall acceptance of the bread, as well as its texture, aroma, taste, and color, was done. It is clear that MD had a more distinct impact than ZG on the way dough was mixed, the texture of the gel, and the finished product. The combination of MD and ZG significantly altered the bread's physical characteristics and its aging over time. The decreased peak viscosity and noticeably smaller setback of wheat flour gels, which corresponded to lower gel hardness, serve as evidence of reduced amylose retrogradation. At 2%, MD outperformed ZG in terms of increasing water absorption, dough stability, and bread loaf volume. With the exception of the blend that included three times as much MD as ZG, all mixes, including the control, exhibited an increase in bread firmness as a function of time after storage. Overall, the panelists liked (score of 5 and above) the bread made with mixes that had either MD or ZG, or a combination of both.

Use of Gum Cordia (Cordia myxa) as a Natural Starch Modifier; Effect on Pasting, Thermal, Textural, and Rheological Properties of Corn Starch.

Incorporation of hydrocolloid gums in native starches help to improve their pasting, thermal, rheological and textural properties along with improvement in the stability of starch gels. The use of Cordia gum is not widely studied as a starch modifier and this fact could make this study more interesting and unique. This study investigated the effects of the non-conventional hydrocolloid gum (Cordia gum) on corn starch properties. Corn starch and gum Cordia (GC) blends were prepared at different replacement levels (0%, 3%, 6%, 9%, and 12%). The effect of GC levels on pasting, thermal, rheological, and textural properties were evaluated using rapid viscoanalyzer, differential scanning colorimeter, rheometer, and texture analyzer. The presence of GC significantly increased starch gelatinization temperatures, enthalpies, peak viscosities, final viscosities, and setback viscosities. GC improved freeze thaw stability in starch. The shear rate (1/s) versus shear stress (σ) data of all samples fitted well to the simple power law model (R2 = 0.97-0.99). The control had the lowest flow behavior index (n; 0.17), which increased to (0.36-0.56) with increasing GC levels. The consistency index (K) of the starch-gum blends increased with increasing GC levels. The dominance of elastic properties over viscous properties was demonstrated by G' > G″. The magnitudes of G' and G″ increased with increasing GC concentration. The outcomes could help to use this modification method as an alternative to chemical and enzymatic modification with respect to cost, safety, less time consumption and less requirement of process modifications.