RESUMEN
Because of the brain's complexity, developing effective treatments for neurological disorders is a formidable challenge. Research efforts to this end are advancing as in vitro systems have reached the point that they can imitate critical components of the brain's structure and function. Brain-on-a-chip (BoC) was first used for microfluidics-based systems with small synthetic tissues but has expanded recently to include in vitro simulation of the central nervous system (CNS). Defining the system's qualifying parameters may improve the BoC for the next generation of in vitro platforms. These parameters show how well a given platform solves the problems unique to in vitro CNS modeling (like recreating the brain's microenvironment and including essential parts like the blood-brain barrier (BBB)) and how much more value it offers than traditional cell culture systems. This review provides an overview of the practical concerns of creating and deploying BoC systems and elaborates on how these technologies might be used. Not only how advanced biosensing technologies could be integrated with BoC system but also how novel approaches will automate assays and improve point-of-care (PoC) diagnostics and accurate quantitative analyses are discussed. Key challenges providing opportunities for clinical translation of BoC in neurodegenerative disorders are also addressed.
Asunto(s)
Técnicas Biosensibles , Encéfalo , Barrera Hematoencefálica , Microfluídica , Dispositivos Laboratorio en un ChipRESUMEN
Layered double hydroxides (LDHs) offer unique source of inspiration for design of bone mimetic biomaterials due to their superior mechanical properties, drug delivery capability and regulation cellular behaviors, particularly by divalent metal cations in their structure. Three-dimensional (3D) bioprinting of LDHs holds great promise as a novel strategy thanks to highly tunable physiochemical properties and shear-thinning ability of LDHs, which allow shape fidelity after deposition. Herein, we introduce a straightforward strategy for extrusion bioprinting of cell laden nanocomposite hydrogel bioink of gelatin methacryloyl (GelMA) biopolymer and LDHs nanoparticles. First, we synthesized LDHs by co-precipitation process and systematically examined the effect of LDHs addition on printing parameters such as printing pressure, extrusion rate, printing speed, and finally bioink printability in creating grid-like constructs. The developed hydrogel bioinks provided precise control over extrudability, extrusion uniformity, and structural integrity after deposition. Based on the printability and rheological analysis, the printability could be altered by controlling the concentration of LDHs, and printability was found to be ideal with the addition of 3 wt % LDHs. The addition of LDHs resulted in remarkably enhanced compressive strength from 652 kPa (G-LDH0) to 1168 kPa (G-LDH3). It was shown that the printed nanocomposite hydrogel scaffolds were able to support encapsulated osteoblast survival, spreading, and proliferation in the absence of any osteoinductive factors taking advantage of LDHs. In addition, cells encapsulated in G-LDH3 had a larger cell spreading area and higher cell aspect ratio than those encapsulated in G-LDH0. Altogether, the results demonstrated that the developed GelMA/LDHs nanocomposite hydrogel bioink revealed a high potential for extrusion bioprinting with high structural fidelity to fabricate implantable 3D hydrogel constructs for repair of bone defects.
Asunto(s)
NanogelesRESUMEN
Addressing osteochondral defects, the objective of current study was to synthesize bilayered hydrogel, where the cartilage layer was formed by alginate (Alg)-polyacrylamide (PAAm) with and without the addition of TGF-ß3 and bone layer by laponite XLS/Alg-PAAm and characterize by in vitro and in vivo experiments. Exceeding the mechanical strength of Alg-PAAm (32.95 ± 1.23 kPa) and XLS based (317.5 ± 21.72 kPa) hydrogels, XLS/Alg-PAAm hydrogel (469.7 ± 6.1 kPa) activated macrophages towards M2 phenotype and stimulated the expression of anti-inflammatory factors. The addition of TGF-ß3 accelerated transition of macrophage polarization, especially between day 4 and 7. The expression levels of M1-related genes such as CD80, iNOS and TNF-α decreased gradually after day 4, reaching lowest values at day 13, whereas the expression levels of M2-related genes, CD206, Arg1 and STAT6 significantly increased promoting M2 macrophage polarization, which might be associated with accelerated bone repair. Moreover, bilayer structure exhibited a better cell viability as well as repairment thorough the XLS contents. In vivo histological examinations verified the significant surface regularity and hyaline like tissue formation employment, along with synchronized degradation profile of the hydrogel with tissue healing at the end of 12 weeks. A mechanically durable, biocompatible and immunocompatible hydrogel was formulated to be utilized in bone-cartilage engineering applications.
Asunto(s)
Alginatos , Ingeniería de Tejidos , Resinas Acrílicas , Alginatos/farmacología , Condrocitos , Hidrogeles/química , Macrófagos , Silicatos , Factor de Crecimiento Transformador beta3/metabolismoRESUMEN
The desired organ in micro-tissue models of organ-on-a-chip (OoC) devices dictates the optimum biomaterials, divided into natural and synthetic biomaterials. They can resemble biological tissues' biological functions and architectures by constructing bioactivity of macromolecules, cells, nanoparticles, and other biological agents. The inclusion of such components in OoCs allows them having biological processes, such as basic biorecognition, enzymatic cleavage, and regulated drug release. In this report, we review natural-based biomaterials that are used in OoCs and their main characteristics. We address the preparation, modification, and characterization methods of natural-based biomaterials and summarize recent reports on their applications in the design and fabrication of micro-tissue models. This article will help bioengineers select the proper biomaterials based on developing new technologies to meet clinical expectations and improve patient outcomes fusing disease modeling.
Asunto(s)
Materiales Biocompatibles , Dispositivos Laboratorio en un Chip , HumanosRESUMEN
In this study, modified kappa-carrageenan/pectin hydrogel patches were fabricated for treatment of buccal fungal infections. For this purpose, kappa-carrageenan-g-acrylic acid was modified with different thiolated agents (L-cysteine and 3-mercaptopropionic acid), and the thiol content of the resulting modified kappa-carrageenan was confirmed by elemental analyzer. Then, the hydrogel patches were fabricated, and characterized by Fourier-transform infrared spectroscopy, thermogravimetric analysis, ex vivo mucoadhesion test, and swelling behavior. Triamcinolone acetonide was added either directly or by encapsulating within the poly(lactic-co-glycolic acid) nanoparticles. The release amount of the drug from the directly loaded patch was 7.81 mg/g polymer, while it was 3.28 mg/g polymer for the encapsulated patch with the same content at 7 hr. The hydrogel patches had no cytotoxicity by cell culture studies. Finally, the drug loaded hydrogel patches were demonstrated antifungal activity against Aspergillus fumigatus and Aspergillus flavus. These results provide that the novel modified kappa-carrageenan and pectin based buccal delivery system has promising antifungal property, and could have advantages compared to conventional buccal delivery systems.
Asunto(s)
Sistemas de Liberación de Medicamentos , Pectinas , Carragenina/química , Carragenina/farmacología , Hidrogeles/farmacología , Pectinas/química , Pectinas/farmacología , Compuestos de Sulfhidrilo/químicaRESUMEN
Abstract In an attempt to increase molecular stability and provide controlled release, vascular endothelial growth factor (VEGF) was encapsulated into polycaprolactone (PCL) nanoparticles. Both VEGF-free and VEGF-loaded PCL nanoparticles were formulated by w/o/w double emulsion of the dichloromethane-water system in the presence of polyvinyl alcohol (PVA) and rat serum albumin. To achieve the optimal formulation concerning particle size and monodispersity, studies were carried out with different formulation parameters, including PVA concentration, homogenization time and rate. Scanning electron microscopy and dynamic light scattering analysis showed respectively that particles had a spherical shape with a smooth surface and particle size varying between 58.68-751.9 nm. All of the formulations were negatively charged according to zeta potential analysis. In vitro release study was performed in pH 7.4 phosphate-buffered saline at 37°C and released VEGF amount was measured by enzyme-linked immunosorbent assay (ELISA) method. At the end of the 35th day, 10% of total encapsulated VEGF was released with a sustained-release profile, which fitted the Korsmeyer-Peppas kinetic model. The bioactivation of the nanoparticles was evaluated using XTT and ELISA methods. As a result, the released VEGF was biologically active and also VEGF loaded PCL nanoparticles enhanced proliferation of the human umbilical vein endothelial cells in cell culture.
Asunto(s)
Factor A de Crecimiento Endotelial Vascular , Nanopartículas/clasificación , Técnicas In Vitro/métodos , Ensayo de Inmunoadsorción Enzimática/métodos , Microscopía Electrónica de Rastreo/métodos , Técnicas de Cultivo de Célula/métodos , Células Endoteliales de la Vena Umbilical HumanaRESUMEN
Traumatic injuries, tumor resections, and degenerative diseases can damage skeletal muscle and lead to functional impairment and severe disability. Skeletal muscle regeneration is a complex process that depends on various cell types, signaling molecules, architectural cues, and physicochemical properties to be successful. To promote muscle repair and regeneration, various strategies for skeletal muscle tissue engineering have been developed in the last decades. However, there is still a high demand for the development of new methods and materials that promote skeletal muscle repair and functional regeneration to bring approaches closer to therapies in the clinic that structurally and functionally repair muscle. The combination of stem cells, biomaterials, and biomolecules is used to induce skeletal muscle regeneration. In this review, we provide an overview of different cell types used to treat skeletal muscle injury, highlight current strategies in biomaterial-based approaches, the importance of topography for the successful creation of functional striated muscle fibers, and discuss novel methods for muscle regeneration and challenges for their future clinical implementation.
Asunto(s)
Materiales Biocompatibles , Músculo Esquelético , Enfermedades Musculares/terapia , Regeneración , Ingeniería de Tejidos/métodos , Andamios del Tejido , Animales , Línea Celular , Humanos , Músculo Esquelético/lesiones , Músculo Esquelético/fisiologíaRESUMEN
Current implantable materials are limited in terms of function as native tissue, and there is still no effective clinical treatment to restore articular impairments. Hereby, a functionalized polyacrylamide (PAAm)-alginate (Alg) Double Network (DN) hydrogel acting as an articular-like tissue is developed. These hydrogels sustain their mechanical stability under different temperature (+4 °C, 25 °C, 40 °C) and humidity conditions (60% and 75%) over 3 months. As for the functionalization, transforming growth factor beta-3 (TGF-ß3) encapsulated (NPTGF-ß3) and empty poly(lactide-co-glycolide) (PLGA) nanoparticles (PLGA NPs) are synthesized by using microfluidic platform, wherein the mean particle sizes are determined as 81.44 ± 9.2 nm and 126 ± 4.52 nm with very low polydispersity indexes (PDI) of 0.194 and 0.137, respectively. Functionalization process of PAAm-Alg hydrogels with ester-end PLGA NPs is confirmed by FTIR analysis, and higher viscoelasticity is obtained for functionalized hydrogels. Moreover, cartilage regeneration capability of these hydrogels is evaluated with in vitro and in vivo experiments. Compared with the PAAm-Alg hydrogels, functionalized formulations exhibit a better cell viability. Histological staining, and score distribution confirmed that proposed hydrogels significantly enhance regeneration of cartilage in rats due to stable hydrogel matrix and controlled release of TGF-ß3. These findings demonstrated that PAAm-Alg hydrogels showed potential for cartilage repair and clinical application.
Asunto(s)
Resinas Acrílicas/química , Alginatos/química , Materiales Biocompatibles/química , Cartílago Articular/efectos de los fármacos , Hidrogeles/química , Nanopartículas/química , Factor de Crecimiento Transformador beta3/farmacocinética , Implantes Absorbibles , Animales , Materiales Biocompatibles/farmacología , Cartílago Articular/crecimiento & desarrollo , Cartílago Articular/lesiones , Supervivencia Celular/efectos de los fármacos , Condrocitos/citología , Condrocitos/efectos de los fármacos , Condrocitos/fisiología , Composición de Medicamentos/métodos , Miembro Posterior/efectos de los fármacos , Masculino , Nanopartículas/ultraestructura , Ratas , Ratas Sprague-Dawley , Factor de Crecimiento Transformador beta3/química , Factor de Crecimiento Transformador beta3/metabolismo , Resultado del TratamientoRESUMEN
Sutures, staples, clips and skin closure strips are used as the gold standard to close wounds after an injury. In spite of being the present standard of care, the utilization of these conventional methods is precarious amid complicated and sensitive surgeries such as vascular anastomosis, ocular surgeries, nerve repair, or due to the high-risk components included. Tissue adhesives function as an interface to connect the surfaces of wound edges and prevent them from separation. They are fluid or semi-fluid mixtures that can be easily used to seal any wound of any morphology - uniform or irregular. As such, they provide alternatives to new and novel platforms for wound closure methods. In this review, we offer a background on the improvement of distinctive tissue adhesives focusing on the chemistry of some of these products that have been a commercial success from the clinical application perspective. This review is aimed to provide a guide toward innovation of tissue bioadhesive materials and their associated biomedical applications.
RESUMEN
Wound repair is a complex process that has not been entirely understood. It can conclude in several irregularities. Hence, designing an appropriate wound dressing that can accelerate the healing period is critical. Infections, a major obstacle to wound repair, cause an elevated inflammatory responses and result in ultimate outcome of incomplete and prolonged wound repair. To overcome these shortcomings, there is a growing requirement for antibacterial wound dressings. Dressings with antibacterial activities and multifunctional behaviors are highly anticipated to avoid the wound infection for successful healing. The aim of this review is not only to concentrate on the importance of antibacterial dressings for wound healing applications but also to discuss recent studies and some future perspectives about antibacterial wound dressings.
Asunto(s)
Antibacterianos/farmacología , Vendajes , Cicatrización de Heridas , Infección de Heridas/tratamiento farmacológico , Animales , Infecciones Bacterianas/tratamiento farmacológico , Materiales Biocompatibles , Sistemas de Liberación de Medicamentos , Humanos , Concentración de Iones de Hidrógeno , Nanopartículas del Metal/química , Metales , Polímeros/química , Piel/efectos de los fármacos , TemperaturaRESUMEN
An approach for cancer treatment is modulation of tumor microenvironment. Based on the role of extracellular matrix in cell modulation, fabrication of textured materials mimicking extracellular matrix could provide novel opportunities such as determining cancer cell behaviour. With this background, in this work, we have fabricated doxorubicin hydrochloride loaded nanotextured films which promote topographical attachment of cancer cells to film surface, and eliminate cells by release of the anti-cancer drug encapsulated within the films. These films are designed to be placed during surgical removal of the tumor with the intent to prevent ovarian cancer recurrence by capturing cancer cell residuals. With this aim, hemispherical protrusion shaped surface textures were acquired using colloidal lithography technique using 280 nm, 210 nm or 99 nm polystyrene particles. Once moulds were formed, nanotextured films were obtained by casting water-in-oil stable polycaprolactone emulsions encapsulating doxorubicin hydrochloride. Films were then characterized, and evaluated as drug delivery systems. According to results, we found that template morphologies were successfully transferred to films by atomic force microscopy studies. Hydrophilic surfaces were formed with contact angle values around 40°. In-vitro drug release studies indicated that nanotextured films best fit into the Higuchi model, and â¼30% of the drug is released from the films within 60 days. Cell culture results indicated increases in the attachment and viability of human ovarian cancer cells to nanotextured surfaces, particularly to the film fabricated using 99 nm particles. Our results demonstrated that delivery of anti-cancer drugs by use of nanotextured materials could be efficient in cancer therapy, and may offer new possibilities for cancer treatment.
Asunto(s)
Antibióticos Antineoplásicos/administración & dosificación , Doxorrubicina/administración & dosificación , Sistemas de Liberación de Medicamentos , Neoplasias Ováricas/tratamiento farmacológico , Antibióticos Antineoplásicos/farmacología , Línea Celular Tumoral , Supervivencia Celular/efectos de los fármacos , Doxorrubicina/farmacología , Liberación de Fármacos , Femenino , Humanos , Microscopía de Fuerza Atómica , Nanoestructuras , Neoplasias Ováricas/patología , Tamaño de la Partícula , Poliésteres/química , Microambiente Tumoral/efectos de los fármacosRESUMEN
Oxaceprol is well-defined therapeutic agent as an atypical inhibitor of inflammation in osteoarthritis. In the present study, we aimed to develop and characterize oxaceprol-loaded poly-lactide-co-glycolide (PLGA) nanoparticles for intra-articular administration in osteoarthritis. PLGA nanoparticles were prepared by double-emulsion solvent evaporation method. Meanwhile, a straightforward and generally applicable high performance liquid chromatography method was developed, and validated for the first time for the quantification of oxaceprol. To examine the drug carrying capacity of nanoparticles, varying amount of oxaceprol was entrapped into a constant amount of polymer matrix. Moreover, the efficacy of drug amount on nanoparticle characteristics such as particle size, zeta potential, morphology, drug entrapment, and in vitro drug release was investigated. Nanoparticle sizes were between 229 and 509 nm for different amount of oxaceprol with spherical smooth morphology. Encapsulation efficiency ranged between 39.73 and 63.83% by decreasing oxaceprol amount. The results of Fourier transform infrared and DSC showed absence of interaction between oxaceprol and PLGA. The in vitro drug release from these nanoparticles showed a sustained release of oxaceprol over 30 days. According to cell culture studies, oxaceprol-loaded nanoparticles had no cytotoxicity with high biocompatibility. This study was the first step of developing an intra-articular system in the treatment of osteoarthritis for the controlled release of oxaceprol. Our findings showed that these nanoparticles can be beneficial for an effective treatment of osteoarthritis avoiding side effects associated with oral administration.
Asunto(s)
Antirreumáticos/administración & dosificación , Hidroxiprolina/administración & dosificación , Nanopartículas , Osteoartritis/tratamiento farmacológico , Antirreumáticos/farmacología , Antirreumáticos/toxicidad , Células Cultivadas , Cromatografía Líquida de Alta Presión , Preparaciones de Acción Retardada , Portadores de Fármacos/química , Liberación de Fármacos , Humanos , Hidroxiprolina/farmacología , Hidroxiprolina/toxicidad , Osteoartritis/patología , Tamaño de la Partícula , Copolímero de Ácido Poliláctico-Ácido Poliglicólico/químicaRESUMEN
An amphiphilic core/shell-type polymer-based drug carrier system (HPAE- PCL-b -MPEG), composed of hyperbranched poly(aminoester)-based polymer (HPAE) as the core building block and poly(ethylene glycol)-b - poly(ε-caprolactone) diblock polymers (MPEG-b -PCL) as the shell building block, was designed. The synthesized polymers were characterized with FTIR, 1 H NMR, 13 C NMR, and GPC analysis. Monodisperse HPAE-PCL-b - MPEG nanoparticles with dimensions of < 200 nm and polydispersity index of < 0.5 were prepared by nanoprecipitation method and characterized with SEM, particle size, and zeta potential analysis. 5-Fluorouracil was encapsulated within HPAE-PCL-b -MPEG nanoparticles. In vitro drug release profiles and cytotoxicity of blank and 5-fluorouracil-loaded nanoparticles were examined against the human colon cancer HCT116 cell line. All results suggest that HPAE-PCL-b - MPEG nanoparticles offer an alternative and effective drug nanocarrier system for drug delivery applications.
RESUMEN
Bone nonunion may occur when the fracture is unstable, or blood supply is impeded. To provide an effective treatment for the healing of nonunion defects, we introduce an injectable osteogenic hydrogel that can deliver cells and vasculogenic growth factors. We used a silicate-based shear-thinning hydrogel (STH) to engineer an injectable scaffold and incorporated polycaprolactone (PCL) nanoparticles that entrap and release vasculogenic growth factors in a controlled manner. By adjusting the solid composition of gelatin and silicate nanoplatelets in the STH, we defined optimal conditions that enable injection of STHs, which can deliver cells and growth factors. Different types of STHs could be simultaneously injected into 3D constructs through a single extrusion head composed of multiple syringes and needles, while maintaining their engineered structure in a continuous manner. The injected STHs were also capable of filling any irregularly shaped defects in bone. Osteogenic cells and endothelial cells were encapsulated in STHs with and without vasculogenic growth factors, respectively, and when co-cultured, their growth and differentiation were significantly enhanced compared to cells grown in monoculture. This study introduces an initial step of developing a new platform of shape-tunable materials with controlled release of angiogenic growth factors by utilizing PCL nanoparticles.
Asunto(s)
Preparaciones de Acción Retardada/química , Portadores de Fármacos/química , Hidrogeles/química , Péptidos y Proteínas de Señalización Intercelular/administración & dosificación , Andamios del Tejido/química , Animales , Línea Celular , Células Cultivadas , Células Inmovilizadas/citología , Técnicas de Cocultivo , Células Endoteliales de la Vena Umbilical Humana/citología , Humanos , Inyecciones , Células Madre Mesenquimatosas/citología , Nanopartículas/química , Neovascularización Fisiológica , Osteogénesis , Poliésteres/química , Silicatos/química , PorcinosRESUMEN
The skin is the largest and most exposed organ in the human body. Not only it is involved in numerous biological processes essential for life but also it represents a significant endpoint for the application of pharmaceuticals. The area of in vitro skin tissue engineering has been progressing extensively in recent years. Advanced in vitro human skin models strongly impact the discovery of new drugs thanks to the enhanced screening efficiency and reliability. Nowadays, animal models are largely employed at the preclinical stage of new pharmaceutical compounds development for both risk assessment evaluation and pharmacokinetic studies. On the other hand, animal models often insufficiently foresee the human reaction due to the variations in skin immunity and physiology. Skin-on-chips devices offer innovative and state-of-the-art platforms essential to overcome these limitations. In the present review, we focus on the contribution of skin-on-chip platforms in fundamental research and applied medical research. In addition, we also highlighted the technical and practical difficulties that must be overcome to enhance skin-on-chip platforms, e.g. embedding electrical measurements, for improved modeling of human diseases as well as of new drug discovery and development.
Asunto(s)
Dispositivos Laboratorio en un Chip , Piel/patología , Animales , HumanosRESUMEN
Stimuli-responsive porous polymer materials have promising biomedical application due to their ability to trap and release biomacromolecules. In this work, a class of highly porous electrospun fibers is designed using polylactide as the polymer matrix and poly(ethylene oxide) as a porogen. Carbon nanotubes (CNTs) with different concentrations are further impregnated onto the fibers to achieve self-sealing functionality induced by photothermal conversion upon light irradiation. The fibers with 0.4 mg mL-1 of CNTs exhibit the optimum encapsulation efficiency of model biomacromolecules such as dextran, bovine serum albumin, and nucleic acids, although their photothermal conversion ability is slightly lower than the fibers with 0.8 mg mL-1 of CNTs. Interestingly, reversible reopening of the surface pores is accomplished with the degradation of PLA, affording a further possibility for sustained release of biomacromolecules after encapsulation. Effects of CNT loading on fiber morphology, structure, thermal/mechanical properties, degradation, and cell viability are also investigated. This novel class of porous electrospun fibers with self-sealing capability has great potential to serve as an enabling strategy for trapping/release of biomacromolecules with promising applications in, for example, preventing inflammatory diseases by scavenging cytokines from interstitial body fluids.
Asunto(s)
Sustancias Macromoleculares/química , Nanotecnología/métodos , Nanotubos de Carbono/química , Animales , Proliferación Celular , Supervivencia Celular , Fluoresceína/química , Interacciones Hidrofóbicas e Hidrofílicas , Mioblastos/citología , Nanotubos de Carbono/ultraestructura , Poliésteres/química , Polietilenglicoles/química , Porosidad , Rodaminas/química , Albúmina Sérica Bovina/química , Resistencia a la TracciónRESUMEN
The aim of regenerative engineering is to restore complex tissues and biological systems through convergence in the fields of advanced biomaterials, stem cell science, and developmental biology. Hydrogels are one of the most attractive biomaterials for regenerative engineering, since they can be engineered into tissue mimetic 3D scaffolds to support cell growth due to their similarity to native extracellular matrix. Advanced nano- and micro-technologies have dramatically increased the ability to control properties and functionalities of hydrogel materials by facilitating biomimetic fabrication of more sophisticated compositions and architectures, thus extending our understanding of cell-matrix interactions at the nanoscale. With this perspective, this review discusses the most commonly used hydrogel materials and their fabrication strategies for regenerative engineering. We highlight the physical, chemical, and functional modulation of hydrogels to design and engineer biomimetic tissues based on recent achievements in nano- and micro-technologies. In addition, current hydrogel-based regenerative engineering strategies for treating multiple tissues, such as musculoskeletal, nervous and cardiac tissue, are also covered in this review. The interaction of multiple disciplines including materials science, cell biology, and chemistry, will further play an important role in the design of functional hydrogels for the regeneration of complex tissues.
Asunto(s)
Hidrogeles/química , Medicina Regenerativa/métodos , Ingeniería de Tejidos/métodos , Animales , Investigación Biomédica , Humanos , Ratones , Nanomedicina , NanopartículasRESUMEN
Nanotechnology offers significant potential in regenerative medicine, specifically with the ability to mimic tissue architecture at the nanoscale. In this perspective, we highlight key achievements in the nanotechnology field for successfully mimicking the composition and structure of different tissues, and the development of bio-inspired nanotechnologies and functional nanomaterials to improve tissue regeneration. Numerous nanomaterials fabricated by electrospinning, nanolithography and self-assembly have been successfully applied to regenerate bone, cartilage, muscle, blood vessel, heart and bladder tissue. We also discuss nanotechnology-based regenerative medicine products in the clinic for tissue engineering applications, although so far most of them are focused on bone implants and fillers. We believe that recent advances in nanotechnologies will enable new applications for tissue regeneration in the near future.
Asunto(s)
Biomimética , Nanoestructuras/química , Nanotecnología/métodos , Medicina Regenerativa , Ingeniería de Tejidos/métodos , Andamios del Tejido/química , Animales , HumanosRESUMEN
Peripheral nerve gaps exceeding 1 cm require a bridging repair strategy. Clinical feasibility of autogenous nerve grafting is limited by donor site comorbidity. In this study we investigated neuroregenerative efficacy of autogenous vein grafts implanted with tissue fragments from distal nerve in combination with vascular endothelial growth factor (VEGF) or mesenchymal stem cells (MSCs) in repair of rat peripheral nerve defects. Six-groups of Sprague-Dawley rats (n = 8 each) were evaluated in the autogenous setting using a 1.6 cm long peroneal nerve defect: Empty vein graft (group 1), Nerve graft (group 2), Vein graft and nerve fragments (group 3), Vein graft and nerve fragments and blank microspheres (group 4), Vein graft and nerve fragments and VEGF microspheres (group 5), Vein graft and nerve fragments and MSCs (group 6). Nerve fragments were derived from distal segment. Walking track analysis, electrophysiology and nerve histomorphometry were performed for assessment. Peroneal function indices (PFI), electrophysiology (amplitude) and axon count results for group 2 were -9.12 ± 3.07, 12.81 ± 2.46 mV, and 1697.88 ± 166.18, whereas the results for group 5 were -9.35 ± 2.55, 12.68 ± 1.78, and 1566 ± 131.44, respectively. The assessment results did not reveal statistical difference between groups 2 and 5 (P > 0.05). The best outcomes were seen in group 2 and 5 followed by group 6. Compared to other groups, poorest outcomes were seen in group 1 (P ≤ 0.05). PFI, electrophysiology (amplitude) and axon count results for group 1 were -208.82 ± 110.69, 0.86 ± 0.52, and 444.50 ± 274.03, respectively. Vein conduits implanted with distal nerve-derived nerve fragments improved axonal regeneration. VEGF was superior to MSCs in facilitating nerve regeneration. © 2015 Wiley Periodicals, Inc. Microsurgery 36:578-585, 2016.
Asunto(s)
Regeneración Tisular Dirigida/métodos , Trasplante de Células Madre Mesenquimatosas , Traumatismos de los Nervios Periféricos/terapia , Nervio Peroneo/lesiones , Factor A de Crecimiento Endotelial Vascular/uso terapéutico , Injerto Vascular/métodos , Venas/trasplante , Animales , Terapia Combinada , Electrodiagnóstico , Regeneración Nerviosa/fisiología , Traumatismos de los Nervios Periféricos/fisiopatología , Nervio Peroneo/fisiopatología , Nervio Peroneo/cirugía , Nervio Peroneo/trasplante , Ratas , Ratas Sprague-Dawley , Trasplante AutólogoRESUMEN
The most commonly used surgical technique for repairing segmental nerve defects is autogenous nerve grafting; however, this method causes donor site morbidity. In this study, we sought to produce prefabricated nerve grafts that can serve as a conduit instead of autologous nerve using a controlled release system created with vascular endothelial growth factor (VEGF)-loaded poly(lactic-co-glycolic acid) (PLGA) microspheres. The study was performed in vitro and in vivo. For the in vitro studies, VEGF-loaded PLGA microspheres were prepared. Thirty rats were used for the in vivo studies. Vein grafts were sutured between the tibial and peroneal nerves in all animals. Three groups were created, and an epineural window, partial incision, and microsphere application were performed, respectively. Walking track analysis, morphologic, and electron microscopic assessment were performed at the end of the eight weeks. Microspheres were produced in spherical shapes as required. Controlled release of VEGF was achieved during a 30-days period. Although signs of nerve injury occurred initially in the partial incision groups according to the indexes of peroneal and tibial function, it improved gradually. The index values were not affected in the other groups. There were many myelinated fibers with large diameters in the partial incision and controlled release groups, while a few myelinated fibers that passed through vein graft in the epineural window group. Thereby, prefabrication was carried out for the second and third groups. It was demonstrated that nerve graft can be prefabricated by the controlled delivery of VEGF.