Effect of moderate hydrostatic pressure on crystallization of palm kernel stearin-sunflower oil model systems.

Lipid crystallization under moderate hydrostatic pressure treatments (200 MPa, 20 °C, 1-24 h) was studied in palm kernel stearin (PS 100%) and its blends with sunflower oil (PS 80, 90 % w/w). Hyperbarically-crystallized samples exhibited significantly higher firmness, elastic modulus and critical stress values as compared to those of the samples crystallized at atmospheric pressure. These data indicate that moderate hydrostatic pressure favored the formation of a higher amount of small palm kernel stearin crystals as compared to those formed at atmospheric pressure. Pressurization did not affect fat polymorphism, but was able to enhance nucleation instead of crystal growth. This work clearly demonstrated the efficacy of moderate hydrostatic pressure in steering lipid crystallization, opening interesting possible applications of high-pressure processing technology in the fat manufacturing sector.

Investigating Structural Defects in Extra Hard Cheese Produced from Low-Temperature Centrifugation of Milk.

The present study investigated some physico-chemical and microbiological traits of 20-month ripened hard cheeses produced from low-temperature high-speed centrifuged raw milk that developed a structural defect consisting of eyes or slits in the paste. Cheeses obtained using the same process and that did not develop the defect were used as controls. The colour, texture, moisture, water activity, proton molecular mobility, microstructure, extent of proteolysis, and viable microorganisms have been evaluated in all the cheese samples, and the significant differences between the defective and non-defective cheeses have been critically discussed. At a microstructural level, the defects caused fat coalescence and an unevenly organised protein matrix with small cracks in the proximity of the openings. The different fat organisation was correlated to a different transverse relaxation time of 1H population relaxing at higher times. The textural and colour features were not different from those of the control cheeses and were comparable with those reported in the literature for other long-ripened hard cheeses. On the other hand, the defective cheeses showed a higher moisture level and lower lactobacilli and total mesophilic bacteria concentrations, but the microbial origin of the defect remains an open hypothesis that deserves further investigation.

Impact of Combined Thermal Pressure Treatments on Physical Properties and Stability of Whey Protein Gel Emulsions.

Emulsion gels are gaining interest as fat replacers due to their benefits associated with calorie reduction and their versatility in a wide range of products. Their production process needs to be tailored to obtain the desired stability and physicochemical properties. This study investigated the effect of heat (70, 80, and 90 °C) and pressure (5, 10, and 15 MPa) to produce whey protein emulsion gels using a pilot-scale tubular heat exchanger equipped with a homogenization valve. Both temperature and pressure determined a significant effect (p < 0.05) on the rheological moduli, with the treated samples displaying a predominant elastic behavior. The treatments also showed an improved pseudoplasticity due to the significant reduction in the flow behavior index (p < 0.05). All the samples showed a bimodal particle size distribution; by increasing the temperature up to 80 °C, a reduction in Dv50 (50th percentile) values compared to the control samples was observed. At 90 °C, the Dv50 value increased because of coalescence and flocculation phenomena occurring during or immediately after processing. The greater aggregation and structural development obtained with stronger process conditions improved the stability of the emulsions. The results show the capability to produce gel emulsions with good physical properties that could be proposed as food ingredients to substitute fats in food products.

Freezing as a solution to preserve the quality of dairy products: the case of milk, curds and cheese.

When thinking of the freezing process in dairy, products consumed in frozen state, such as ice creams come to mind. However, freezing is also considered a viable solutions for many other dairy products, due to increasing interest to reduce food waste and to create more robust supply chains. Freezing is a solution to production seasonality, or to extend the market reach for high-value products with otherwise short shelf life. This review focuses on the physical and chemical changes occurring during freezing of milk, curds and cheeses, critical to maintaining quality of the final product. However, freezing is energy consuming, and therefore the process needs to be optimized to maintain product's quality and reduce its environmental footprint. Furthermore, the processing steps leading to the freezing stage may require some changes compared to traditional, fresh products. Unwanted reactions occur at low water activity, and during modifications such as ice crystals growth and recrystallization. These events cause major physical destabilizations of the proteins due to cryoconcentration, including modification of the colloidal-soluble equilibrium. The presence of residual proteases and lipases also cause important modifications to the texture and flavor of the frozen dairy product.

Water status and dynamics of high-moisture Mozzarella cheese as affected by frozen and refrigerated storage.

High-moisture Mozzarella is one of the most exported cheeses worldwide, but affected by short shelf-life. Freezing can help to reduce waste, but its effect on quality needs to be considered. In this study, the physico-chemical changes of Mozzarella occurring during frozen storage and subsequent refrigerated storage (after thawing) were evaluated. Frozen cheeses stored at -18 °C between 1 and 4 months showed microstructural damage and different physical, textural, sensory properties. With NMR relaxometry it was possible to observe freeze-related dehydration of caseins, by measuring the changes in water relaxation times within the matrix. These modifications were confirmed by microstructural observations that showed the formation of larger serum channels in samples subjected to freezing, compared with fresh cheeses. Sensory evaluation showed skin peeling off in frozen samples. By observing the changes at various length scales it was therefore possible to identify the critical points affecting HM Mozzarella cheese quality during frozen storage.

Ripening of Nostrano Valtrompia PDO Cheese in Different Storage Conditions: Influence on Chemical, Physical and Sensory Properties.

Nostrano Valtrompia is a hard, long-ripened, Italian Protected Designation of Origin (PDO) cheese typically produced by applying traditional cheesemaking practices in small dairies. Due to the limited production, this cheese is characterized by an important market price. Nostrano Valtrompia physico-chemical and sensory quality can be influenced by the duration and conditions of ripening. The objectives of this work were to characterize the physico-chemical and sensory characteristics of Nostrano Valtrompia cheese ripened for 12 and 16 months and to study the influence of different ripening warehouses: a temperature conditioned warehouse (TCW) and in a traditional, not conditioned warehouse (TNCW). The moisture gradient from the rind to the center of the cheese influenced texture, moisture, aw and color. Ripening in different warehouses did not affect the overall appreciation of the cheese nor other physico-chemical (color, moisture) or sensory traits. TCW cheeses were characterized by a slightly softer texture, slightly different openings distribution, and a different sensory perception than TNCW cheeses. These minor differences were related to the less variable environmental ripening conditions of TCW than TNCW. The results of this study can be useful to support the management of the ripening conditions of Nostrano Valtrompia PDO cheese and to rationally introduce new, suitable ripening sites.

Effect of frozen and refrigerated storage on proteolysis and physicochemical properties of high-moisture citric mozzarella cheese.

High-moisture mozzarella is one of the most-exported Italian cheeses worldwide, but its quality is affected by storage. Freezing is regarded as a solution to decrease product waste, extend market reach, and increase convenience, but its effect on quality has to be estimated. In this study, the details related to proteolysis, physicochemical properties, and sensory quality parameters of high-moisture mozzarella as a function of frozen storage (1, 3, and 4 mo) and subsequent refrigerated storage after thawing (1, 3, and 8 d) were evaluated. Frozen cheeses stored at -18°C showed a higher extent of proteolysis, as well as different colorimetric and sensory properties, compared with the fresh, nonfrozen control. Sensory evaluation showed the emergence of oxidized and bitter taste after 1 mo of frozen storage, which supports the proteolysis data. The extent of proteolysis of frozen-stored cheese after thawing was greater than that measured in fresh cheese during refrigerated storage. These results help better understand the changes occurring during frozen storage of high-moisture mozzarella cheese and evaluate possible means to decrease the effect of freezing on the cheese matrix.

Application of Recombined Milk to Produce Crescenza-Type Cheese in Laboratory-Scale Cheesemaking: Implications on Technology and Sensory Properties.

This work evaluated the effect of recombined skimmed milk (RM), mixed in different ratios (40, 60, and 100%) with fresh cow milk, on the processing technology and quality of Crescenza, an industrial soft cheese of the Italian dairy tradition. Crescenza-type cheeses were produced at a laboratory scale, following the industrial process. Control cheese consisted of Crescenza-type cheese produced with 100% whole fresh milk. Compared to control cheese, the substitution of fresh milk with 60-100% of RM deteriorated the coagulation properties and led to a higher moisture retention, whereas, with 40% of RM, the differences were not statistically significant. Cheeses produced with any concentration of RM, although of acceptable quality, differed significantly in terms of sensory properties from control cheese. The addition of colloidal calcium phosphate, or CaCl2 together with a reduction in the size of the curd at cutting, minimized the differences in composition and sensory properties between cheeses produced with 40% RM and control cheese. This study suggested the applicability of 40% RM to obtain Crescenza-type cheese with suitable quality characteristics. The type of product, the technology, the quality, and quantity of the powders are all key factors to be taken into account for a successful application.

Lactobacillus paracasei 4341 as adjunct culture to enhance flavor in short ripened Caciotta-type cheese.

Caciotta is the name used to define a type of Italian semi-hard cheese Caciotta-type cheese. Due to the short ripening time, pasteurization is necessary to eliminate the potential pathogenic bacteria, which may be present in raw milk, causing also the reduction of ripened cheese flavor. The purpose of this research was to evaluate the effect of a selected wild Lactobacillus paracasei strain experimentally used as adjunct culture to enhance the flavour formation in a short-ripened caciotta-type cheese. An integrated polyphasic approach was used to compare the experimental and control Caciotta produced in a company located in Emilia Romagna region (Italy). It was demonstrated how the L. paracasei 4341 was able to develop in curd and cheese interacting with the acidifying commercial starter. The main acidifying starter species, were differently affected by the presence of the adjunct culture. Streptococcus thermophilus shown comparable behavior in all cheese-making step of control and experimental Caciotta, while Lactobacillus delbrueckii subsp bulgaricus, growth was slowed down by the presence of the adjunct culture during the whole ripening time. The higher amount of volatile compounds and organic acids due to the adjunct L. paracasei 4341 lead to a clear differentiation of the experimental Caciotta respect to the control, in terms of aromatic profile, color, texture and sensorial perception.

Applicability of Confocal Raman Microscopy to Observe Microstructural Modifications of Cream Cheeses as Influenced by Freezing.

Confocal Raman microscopy is a promising technique to derive information about microstructure, with minimal sample disruption. Raman emission bands are highly specific to molecular structure and with Raman spectroscopy it is thus possible to observe different classes of molecules in situ, in complex food matrices, without employing fluorescent dyes. In this work confocal Raman microscopy was employed to observe microstructural changes occurring after freezing and thawing in high-moisture cheeses, and the observations were compared to those obtained with confocal laser scanning microscopy. Two commercially available cream cheese products were imaged with both microscopy techniques. The lower resolution (1 µm/pixel) of confocal Raman microscopy prevented the observation of particles smaller than 1 µm that may be part of the structure (e.g., sugars). With confocal Raman microscopy it was possible to identify and map the large water domains formed during freezing and thawing in high-moisture cream cheese. The results were supported also by low resolution NMR analysis. NMR and Raman microscopy are complementary techniques that can be employed to distinguish between the two different commercial formulations, and different destabilization levels.

Arthrospira platensis as Natural Fermentation Booster for Milk and Soy Fermented Beverages.

Arthrospira platensis, commercially known as Spirulina, is a fresh-water cyanobacterium that has been gaining increasing attention in recent years due to its high biological and nutritional value. For this reason, it has been employed in several food applications, to obtain or enhance functional and technological properties of cheese, yogurt, bread, cookies or pasta. The aim of this work was to evaluate the potential boosting effect of two different concentrations (0.25% and 0.50% w/v) of A. platensis on the fermentation capability of several starter lactic acid bacteria (LAB) strains, 1 probiotic and 4 commercial mix culture. These strains were used to ferment three different substrates and their fermentation behaviors were evaluated by impedance analyses together with rheological and color measurements. In tryptic soy broth (TSB), the A. platensis boosting effect was significantly higher if compared to yeast extract for all the starter LAB strains except for Lb. casei, which was equally stimulated. Different results were found when the same LAB strains were cultivated in SSM. The most evident boosting effect was found for S. thermophilus and Lb. casei. LAB growth was promoted by A. platensis, confirming that it could be a useful tool in the production of novel functional fermented dairy foods. The potential boosting effect was evaluated on four commercial mix cultures used to produce milk and soy fermented beverages. It was demonstrated that the booster effect took place, but it was variable and dependent not only on the mix culture used, but also on the substrate and A. platensis concentration. Also, rheological and color modifications were found to be dependent on these factors.

Heat Resistance of Listeria monocytogenes in Dairy Matrices Involved in Mozzarella di Bufala Campana PDO Cheese.

The presence of Listeria monocytogenes in Mozzarella di Bufala Campana Protected Designation of Origin cheeses may depend on curd stretching conditions and post contaminations before packaging. To avoid cross-contamination, thermal treatment of water, brines and covering liquid may become necessary. The present study aimed to improve knowledge about L. monocytogenes thermal resistance focusing on the influence of some cheese making operations, namely curd stretching and heat treatment of fluids in contact with cheese after molding, in order to improve the safety of the cheese, optimize efficacy and sustainability of the processes. Moreover, the role that cheese curd stretching plays in L. monocytogenes inactivation was discussed. The 12 tested strains showed a very heterogeneous heat resistance that ranged from 7 to less than 1 Log10 Cfu/mL reduction after 8 min at 60°C. D-values (decimal reduction times) and z-values (thermal resistance constant) calculated for the most heat resistant strain among 60 and 70°C were highly affected by the matrix and, in particular, heat resistance noticeably increased in drained cheese curd. As cheese curd stretching is not an isothermal process, to simulate the overall lethal effect of an industrial process a secondary model was built. The lethal effect of the process was estimated around 4 Log10 reductions. The data provided may be useful for fresh pasta filata cheese producers in determining appropriate processing durations and temperatures for producing safe cheeses.

Ability of a Wild Weissella Strain to Modify Viscosity of Fermented Milk.

Despite the fact that strains belonging to Weissella species have not yet been approved for use as starter culture, recent toxicological studies open new perspectives on their potential employment. The aim of this study was to evaluate the ability of a wild Weissella minor (W4451) strain to modify milk viscosity compared to Lactobacillus delbrueckii subsp. bulgaricus, which is commonly used for this purpose in dairy products. To reach this goal, milk viscosity has been evaluated by means of two very different instruments: one rotational viscometer and the Ford cup. Moreover, water holding capacity was evaluated. W4451, previously isolated from sourdough, was able to acidify milk, to produce polysaccharides in situ and thus improve milk viscosity. The ability of W4451 to produce at the same time lactic acid and high amounts of polysaccharides makes it a good candidate to improve the composition of starters for dairy products. Ford cup turned out to be a simple method to measure fermented milk viscosity by small- or medium-sized dairies.